Beli Adolf Illig Mesin Thermoforming bekas (77.561)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, ILLIG Universal Thermoforming Machine Tipe UA 155 4g solo Data Teknis - Kontrol Siemens - Ukuran material maks.: 1500 x 1250 mm - Luas pembentukan maks.: 1450 x 1200 mm - Tinggi alat maks.: 700 mm - Ketebalan material maks.: 12 mm - Daya pemanas: 96 kW - Daya total: 105 kW - Pengaman listrik: 160 A - Kapasitas pompa vakum: 250 m³/jam - Kebutuhan udara tekan: 6 bar Perlengkapan - Pemanas atas dengan kontrol 5 zona HTS (700ºC) - Pemanas bawah dengan kontrol 5 zona HTS (500ºC) - Kipas pendingin D06 Gbodexlzqfopfx Ap Djr - Meja kaskade - Kaskade vakum - Punch atas - Termasuk pendingin ILLIG dan alat tempering ILLIG

Kondisi: bekas, Tahun pembuatan: 1998, ILLIG universal forming machine UA 155 4G + BE 155 P FHZ Technical specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming station: - Schleicher P03 control system - Automatic setup and removal function - Top heating: ceramic heater with 5-zone control - Bottom heating: ceramic heater with 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal beams for use with fixed format frames - Lower clamping frame for frame installation from below, central clamping via electric motor Gbodpsxlzrcefx Ap Dor - Lower table pneumatic with rapid/traverse speed adjustable in percentage - Upper plug assist with rapid/traverse speed adjustable in percentage - Pre-blowing automatic, adjustable in percentage - Pre-vacuum adjustable in percentage - De-moulding automatic, adjustable in percentage - Sheet sag control via light barrier with supporting air - 6-fold cooling fan - Large front opening for tool change - Vacuum pump Sheet feeding: - Automatic sheet feeding device - Final heating in feeding for final or pre-heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized transport width adjustment

Kondisi: diremaj di bengkel (bekas), Top heating with small individual radiators via toggle switch Bottom heating with large radiator Top die system Protective grid 4 D05 cooling fans Gsdpfxofug Ane Ap Djbr Pre-blow and demolding automation

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), de_to_hu_it_lt_001 Gjdpfx Apey Aafro Djbr

Tahun pembuatan: 2025, Kondisi: baru, Fully automatic thermoforming machine: Cups/containers are formed, filled, and sealed with film. Suitable for vacuum, gas, and modified atmosphere packaging of food, meat, seafood, fruit, vegetables, medical products, and household goods. Key components are made of stainless steel, with easily exchangeable modular cavities and a water cooling system for the thermoforming tool and sealing module. Vacuum pump by BUSCH (Germany), PLC, touchscreen, and servomotor by OMRON, relays and air switches by SCHNEIDER. Top packaging materials: heat-sealable films; bottom packaging materials: thermoformable sealing film. Both rigid and flexible films can be used. - Specifications: Total power: 380V, 13kW; Compressed air: 1m³/6bar; Vacuum: 0.8–1.0m³/6bar; Water: 4 liters/min; Max. upper film width: 390mm (usable width: 350mm); Cavity length: 200mm; Max. forming depth: 80mm (depth depends on bottom film thickness); Loading area: standard 1m (additional length optional); Packaging capacity: 6 cycles/min; Machine dimensions: L4560×W1020×H1950mm; Weight: 1,500kg. Gedjv Nkz Sjpfx Ap Djbr Please note that our new machine prices are often lower than typical used equipment prices. Feel free to contact us with your packaging requirements. – We usually have 30–50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Fully automatic thermoforming machine: Cups/containers are formed, filled, and sealed with film. Suitable for vacuum, gas, and modified atmosphere packaging of food products such as sandwiches, meat, seafood, fruit, vegetables, as well as non-food items, medical products, and household goods. Central components are made from stainless steel, with easily replaceable modular forming molds, water-cooling system for the thermoforming tool and sealing module. Vacuum pump by BUSCH, pneumatic components by SMC, electronic components primarily from Schneider, photo sensors from SICK, PLC and touchscreen by Delta. - Specifications: Top packaging material: heat-sealable films, width: max. 400mm; bottom packaging material: thermoformable sealing film (rigid and flexible films can be used), thickness: 300 - 900µm, width: max. 400mm + 2mm, forming depth: max. 80mm (forming depth depends on the thickness of the bottom film); loading area: standard 120-150cm (additional length available as an option); max. idle cycle rate: 8 cycles/minute; Power: 3P, 380V, 50/60Hz; Compressed air: 1.2m³/min, 8bar. Gedjv Nk Acspfx Ap Debr Please note that our new prices are often below the typical used prices. Feel free to contact us and let us know your packaging requirements. Typically, we always have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we also offer very short delivery times starting from approx. 3 weeks. All machines come with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Fully automatic thermoforming machine for forming and filling small plastic bottles with liquids, creams or pasty products. Designed for use in the pharmaceutical, food and chemical industries. Thanks to easily interchangeable, modular pockets, bottles of different sizes and shapes can be produced. Suitable for manufacturing multipacks, with the number of bottles freely adjustable. Dosing and filling of the product is carried out by a peristaltic pump, which is characterized by easy operation, cleaning, and adjustment. – Specifications: Packaging materials: PVC/PE composite film, PET/PVDC as an environmentally friendly composite material, PVC/EVOH ultra-high barrier composite film for, e.g., pesticide packaging; Packaging thickness: 0.25-0.35mm; Max. outer roll diameter: 400mm with standard core (70-76mm); Maximum forming depth per side: 12.5mm; Maximum forming area: 120mm x 210mm; Bottle height: 58~108mm; Filling range: 1~50ml/bottle; Max. machine cycle rate in idle: 25 cycles/minute; Power supply: 380V, 50Hz; Power: 17.5kW; Compressed air and consumption: 6bar, 0.4m³/min; Cooling water: temperature 14~18°C, pressure 1.5~2bar, closed circuit 6L/min; Machine dimensions: L7200 x W960 x H1800mm; Weight: 2200kg. Gbodev Nk Aijpfx Ap Der Please note that our new prices are often lower than typical used prices. Feel free to contact us and tell us about your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with a full warranty.

Tahun pembuatan: 2022, Kondisi: siap digunakan (bekas), A small table-top vacuum machine (vacuum chamber machine) from Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16 m³/h, max. operating time per day: 5h. Documentation is available. An on-site inspection is possible. Gbsdpfswt A U Rjx Ap Der

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), A large-format vacuum thermoforming machine by Geiss is available. Sheet cut size min.: 1100mm/1300mm, max. sheet cut size: 2100mm/1800mm, max. forming depth: 620mm. Additional sheet format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional sheet format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Includes a separate loading unit with pneumatic sheet separation equipment, an automatic aligner for sheet cuts in both longitudinal and transverse directions, a pneumatic pusher for removing formed parts from the feeder unit, fully automatic central lubrication for the loading unit, several interchangeable pallets for window sheet sets, a storage rack for window sheets, as well as a vacuum control system with four independently adjustable flow stages and an air treatment system. Documentation is available. Inspection on site is possible. Gbjdpfjwih Arex Ap Dor

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), de-to-hu Gbedpoylnz Sefx Ap Der

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), de-001 Gbodpfxexaphbs Ap Dor

Kondisi: seperti baru (mesin pameran), jam operasional: 50 h, Uhlmann Thermoforming Packaging System UPS 4 ETX For processing PVC forming film and aluminum lidding foil Base machine in modular technology and balcony construction, with 12 modules: - Forming film unwind unit with 2 pneumatic expansion shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and splicing table for forming film - Indexed forming film unwind - 3-zone contact heating: - 6 heating circuits, individually controllable - simultaneous heating of min. 3 index advances - heating plates open automatically when the machine stops - Forming station with 4-column lift table guidance - Filling section, length 1,360 mm - Safety cover on the filling section Lidding foil unwind on the operator side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4-column lift table guidance: - integrated overload protection - automatic lifting of the upper sealing tool when the machine stops - Free module for the integration of an additional station - Gripper chain indexing - Punching station with blister lowering - Waste cutter with integrated motorised transport of the punching grid - Smoothing station - Perforation station ET/DT - Compressed air supply monitoring with machine stop when minimum value Gjdpjtndpzefx Ap Dobr is not reached - Visio Scan - electromagnetically locked safety doors - Fast format change due to: - plug-in format parts - plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase geared motor - Control cabinet at the rear of the machine, swivelling Operator control system: Paccontrol - 10.4" TFT color display with 640x480 pixel resolution - 68C030 processor - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Ejection of individual blister rows, e.g., overheated film in the heating station, products in the sealing station, etc. Machine control: Programmable logic sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controllers, cam switches, etc. - External program memory Technical Data UPS 4 ETX: - Cycle rate: - ET range: min./max.: 15/50 cycles/min. Depending on film quality, feed and format design - Format range: min./max. feed in filling section: 64/226 mm min./max. film width: 100/300 mm min./max. punching width: 28/284 mm max. forming depth: 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Kondisi: baik (bekas), Tahun pembuatan: 1990, jam operasional: 45.350 h, nomor mesin/kendaraan: 1537, Hybrid machine designed for thermoforming sheets or roll stock. Machine equipped with a BE-type sheet loader without preheating. Fitted with a PR-type roll unwinder. Comes with upper and lower tables. Controlled by a Schleicher PDPF process controller. Fast clamping system for reduction frames and tooling. Maximum working width: 700 mm. Maximum sheet size: 1000 x 700 mm. Maximum sheet thickness: 10 mm. Godetv Ivzopfx Ap Djbr We will take care of dismantling and loading onto your truck arranged for collection.

Kondisi: baik (bekas), Tahun pembuatan: 1990, jam operasional: 11.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1531, lebar film: 700 mm, jenis arus masuk: AC (pendingin udara), lebar total: 700 mm, panjang total: 3.500 mm, tinggi total: 3.500 mm, tegangan masuk: 400 V, daya pompa vakum: 3.000 W, sambungan udara terkompresi: 6 batang, lebar kerja: 700 mm, kapasitas pompa: 100 l/menit, tinggi cetakan (min.): 300 mm, lebar kabinet kontrol: 1.000 mm, suhu operasional: 650 °C, UA 100 1G thermoforming machine, year 1990, in good working condition. Maximum sheet dimensions: 1000 x 700 x 10 mm Upper heating: 3 pilot emitters, lower heating: 1 pilot emitter Motorized adjustable plug assist height Quick clamping of upper and lower frame Quick clamping of tooling on lower table Gedpjt Iracsfx Ap Dsbr Quick clamping of tooling on upper table Lower film sag control Bubble blowing with photoelectric cell Adjustable bubble intensity and demolding sequences can be stored → cascading pneumatic valves BUSCH vacuum pump, 100 m³/h Machine decommissioned and stored following replacement by a new ILLIG UA 4G automatic machine Offered price refers to the machine disassembled and loaded onto your truck Can be recommissioned if you wish to inspect the machine on site

Kondisi: Pembawa suku cadang rusak (bekas), Manufacturer: Illig Model: HSA 50C The machine is incomplete and not operational! Gedpfjuk Dwfex Ap Dobr For spare parts only!!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 616, jenis arus masuk: AC (pendingin udara), tegangan masuk: 240 V, sambungan udara terkompresi: 6 batang, lebar film: 480 mm, arus masuk: 16 A, Untuk dijual: Blister machine ILLIG HSA 50 C, tahun produksi 1991. Ini adalah mesin blister welding otomatis throughput tinggi dengan pengumpan kartu, untuk ketebalan film antara 150 µm hingga 400 µm (mungkin lebih tebal, tetapi belum pernah diuji secara langsung). Lini produksi ditawarkan lengkap (lihat foto). Kecepatan: 1–9 siklus/menit pada konfigurasi 4-cavity. Contoh: dispenser aroma, 4 produk per baki blister = 2000 blister/jam. Dimensi sekitar 9m x 1m x 2,25m. Ukuran pallet segel: 57x32 cm. Mesin 100% berfungsi dan masih beroperasi. Inspeksi dan uji coba dapat dilakukan sebelum pembelian. Lokasi: Republik Ceko (10 menit dari perbatasan Bayern/Republik Ceko dekat Furth im Wald). Gsdpfjy Anifjx Ap Dsbr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 748 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5231847, jenis arus masuk: tiga fasa, lebar total: 3.988 mm, panjang total: 4.740 mm, tinggi total: 3.440 mm, tegangan masuk: 400 V, sambungan udara terkompresi: 6 batang, berat keseluruhan: 2.700 kg, Mesin pembentuk termos plastik lembaran Gbjdpfsznbp Tsx Ap Der Mesin untuk memproses bahan setengah jadi Ukuran lembaran maksimum 1.000 x 700 mm Ukuran lembaran minimum 300 x 210 mm Ketebalan lembaran maksimum 12 mm Ketebalan lembaran minimum 0,5 mm Mesin ini dilengkapi sepenuhnya dan siap digunakan dengan sistem pengumpanan otomatis. Dilengkapi dengan fungsi untuk cetakan atas dan bawah, serta cetakan berpendingin air. Pengaturan cerdas melalui parameter material yang telah disimpan. Harga sudah termasuk gergaji horizontal GEISS Horizontalbandsäge HBS 1000.

Tahun pembuatan: 1979, Kondisi: siap digunakan (bekas), Ditawarkan sebuah mesin pemotong lembaran yang memerlukan perbaikan. Lebar potongan: 1150mm, kedalaman umpan: 1150mm, tinggi tumpukan maks.: 165mm, tinggi potongan maks.: 165mm, tinggi meja: sekitar 900mm, kecepatan penggerak belakang maks.: sekitar 300mm/detik, akurasi pemosisian penggerak belakang: 0,01mm. Potongan terkecil tanpa pelat penahan: sekitar 25mm, potongan terkecil dengan pelat penahan: sekitar 90mm, rentang tekanan penekan: sekitar 150daN-4500daN, tekanan penekan pengaman: 30daN, jumlah langkah pisau maks.: sekitar 45 langkah/menit. Dimensi mesin X/Y/Z: sekitar 2600mm/2500mm/1650mm, berat: sekitar 3200kg. Perangkat pengukuran mengalami kerusakan. Pemeriksaan dapat dilakukan setelah perjanjian. Godozklfkepfx Ap Djbr

Tahun pembuatan: 2011, jam operasional: 29.420 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Merek: Illig Model: RDK 80 Tahun: 2011 Gjdpfx Apjzam Hcj Djbr Perkiraan Jam Operasi: 29.420 Stasiun: Pembentukan, Pelubangan, Robot, Pemotongan dan Penumpukan Tanggal Pengiriman: Segera Area Pembentukan Maks: 756 x 565 mm Lebar Lembaran Maks: 805 mm Kedalaman tarik: 120 / 120 mm Gaya Punching Pisau Baja: 600 kN Siklus Maksimum per Menit: 55 Tekanan Pembentukan: 6 bar Semua detail dapat berubah dan/atau terdapat kesalahan. Seluruh peralatan tergantung ketersediaan dan/atau penjualan sebelumnya.

Kondisi: bekas, Tahun pembuatan: 1962, Fungsionalitas: berfungsi sepenuhnya, Adolf John Hanau AB II Construction Timber Saw / Wood Saw / Edging Saw Gbodpfsuprqwex Ap Der Cutting height: 105 mm, Throat depth: 650 mm, Width: 160 mm, Conveyor belt speed: 5–45 m/min From first ownership! Weight with conveyor system: approx. 1,250 kg Connection: 400 V, 32 A Used, fully functional condition

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, LENGKAPNYA LIN PRODUKSI EKSTRUSI LEMBARAN AMUT DAN TERMOFORMING ILLIG Lin produksi ekstrusi lembaran AMUT: Kecepatan kerja maksimum 30 m/menit Ekstruder utama (lapisan A) EA100 / 35D Koekstruder kanan (lapisan B) EA600 / 33D Bahan yang diproses: PP, PS, atau HIPS Produksi per jam hingga 450 kg/jam Lebar lembaran maksimum 720 mm Ketebalan lembaran minimum/maksimum 0,15 / 1,8 mm Kepala ekstrusi lembaran Amut Kalender dengan lebar 1000 mm Diameter rol pemanas 600 mm Mesin termoforming ILLIG Model RDKP Lebar lembaran maksimum 805 mm Diameter gulungan maksimum 1600 mm Gjdpezgtf Djfx Ap Dsbr Berbagai macam cetakan disertakan 4 lini produksi lengkap tersedia Tahun 2010

Tahun pembuatan: 2006, Kondisi: baik (bekas), Illig SK 74-C from an assisted workshop Year of manufacture: 2006 Serial no.: 426-0172 Includes 2 pallets with approximately 38 rolls of film Gbsdper Nv E Nsfx Ap Der Dimensions (approx. in mm): 2200 x 1600 x 1600

Kondisi: bekas, Tahun pembuatan: 1950, Band width 150 mm Band length 6680 mm Voltage 380 V Weight 800 kg Required space approx. 3.2 x 1.6 x 1.75 m Gbodsua Ivcopfx Ap Dsr Wood surface grinding machine Carriage length / Table size: 2500 x 800 mm Abrasive belt dimensions: 150 x 6680 mm Manually movable processing table Table height adjustable

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Data teknis: • Meja putar 4 stasiun • Maks. luas penyegelan 350 x 250 • Maks. kedalaman blister 70 – 100 mm tergantung jenis produk • Gaya penyegelan 12.800 N • Daya pemanas penyegel 1,75 kW • Penyuplai karton • Penyekat kemasan • Unit pembentuk karton Godpfsfua Dcjx Ap Dobr • Kabel dengan steker CEE 16A • Berat sekitar 750 kg Mesin tersedia dalam semua varian b, b-2, b-3, b-4.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, trans_001 Gbjdpfjylbrksx Ap Dsr