Beli Garis Pernis Dua Sisi bekas (4.605)

Kondisi: bekas, Transnorm belt curve conveyor, left-hand, GKF 90°-780-600 IR600 with dual drive-over RA2019 The Transnorm belt curve is in good (used) condition and fully operational. It is equipped with a SEW brand geared motor. Supports are not included in the scope of delivery, but are optionally available upon request. Hfsdpfx Ask Abufsanjg Belt curves are commonly used in intralogistics for in-house transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, extended operating times are not an issue. Conical drums and a specially developed belt guiding system ensure maximum running smoothness. Technical data: Frame width (NB): 780 mm Belt width (GuB): 600 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° Support legs: optionally available Conveying speed (v m/s): dependent on downstream conveyor, please contact us Drive: no motor included, is driven by the downstream conveyor Scope of delivery: without support legs Optionally available: - Support legs - Side guides All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2008, Transnorm Roller Curve Combination, right and left, 45°-1200-900-800 IR800 1551 mm RA2232 Manufacturer: Transnorm Direction of Travel: Combination curve, right- and left-running Roller Width (RB): 800 mm, tapered, plastic coating Nominal/Outer Width (NB): 900 mm Inside Radius (IR): 800 mm Center Section Length: 1200 mm Offset: 1551 mm Frame Height: 80 mm Overall Height including Motor: 450 mm Drive/Transmission: Chain Electrical Data: 300-500 V, 0.37 kW Gear Motor: SEW, R17DT71D4/TH Conveying Speed: please contact us for details Scope of Delivery: without supports Optionally Available: - Supports - Side guides, single-sided or double-sided - Frequency inverter for variable speed control - Length adjustment (longer/shorter) - Additional roller conveyors/roller curves with chain drive All prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. Please contact us by phone or email. Hfedpfxsrixi Ts Aansg We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Karena relokasi, kami menjual mesin pengasah beserta stand dari Safag. Mesin dapat diambil langsung di pabrik kami di Königsbach-Stein. Hsdpfx Aoy Etausanjfg

Kondisi: baik (bekas), Tahun pembuatan: 1996, pengamplasan dua sisi atas-bawah dengan sepatu amplas dan sikat debu lebar pengamplasan maks. 300 mm tinggi pengamplasan maks. 200 mm Hfsdpfx Aoxfl Easansg tahun pembuatan 1994 dengan penandaan CE

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, - Produksi Polandia - Tahun produksi: 2015 - DTR, Sertifikat CE - Penyetingan jarak pisau secara elektrik Hjdpfx Aow H Rdajanofg PARAMETER TEKNIS: - Tinggi pemotongan: 60 mm - Diameter pisau: 250 - 350 mm - Jumlah gergaji: 2 unit - Lebar pemotongan maksimum: 700 mm - Lebar pemotongan minimum: 90 mm - Jarak maksimum antar pisau: 460 mm - Kecepatan umpan dapat diatur dengan inverter - Rentang kecepatan umpan: 0 - 40 m/menit - Daya motor utama: 2 x 4,7 kW - Daya motor gerak umpan: 0,75 kW - Daya motor pengatur jarak pisau: 0,12 kW - Kebutuhan daya total: 11,5 kW - Meja rol sepanjang: 2 x 240 cm - Lebar meja rol: 460 mm - Diameter pipa penghubung: 160 mm - Dimensi transportasi (p/l/t): 200 / 200 / 140 cm - Berat ± 1000 kg

Kondisi: sangat baik (bekas), PENUMPANGGUNGAN DUA SISI – Jembatan Mesin portal yang merupakan bagian dari lini (kode SOFIT: W05025) Sistem vakum (dengan pompa) 2 unit pilar vertikal penyangga balok atas 1 unit balok penahan atas horizontal (tempat dudukan berkelana) 1 unit dudukan bermotor dengan lengan logam horizontal 2 unit lengan logam horizontal dengan vakum cup, dapat disetel 2 unit konveyor rol eksternal untuk tumpukan plat hasil penumpangan 1 unit konveyor rol eksternal bermotor untuk hasil penumpangan Panel listrik terpisah Kontrol elektronik PLC MAGELIS Pagar pengaman perimeter dengan karpet keselamatan Kapasitas kerja (siklus / menit) 15-18 (perkiraan) Hedpoyywl Rjfx Aanofg Ketebalan plat (min/maks) mm 10 - 60 (perkiraan) Ukuran plat min. mm 210 x 230 (perkiraan) Ukuran plat maks. mm 1200 x 3200 (perkiraan) Total daya terpasang Kw

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), de-to-hu-Werkstatt-Zahnradpruefgeraet Hfodpfxoy Ax Tho Aanjg

Kondisi: sangat baik (bekas), DOUBLE-SIDED LOADING STATION Hfodpewbp Nwefx Aanjg Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for stack discharge from the unloader No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load (kW): 80

Kondisi: bekas, nomor mesin/kendaraan: 008412, de20240614-01 Hodpfx Aasyilxmsnjfg

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a production line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 Cam spacing (mm): 500 FORMATTING UNIT (per side): - Protection milling cutter (pre-milling) AS 10 (1 x approx. 5.2 kW) Hjdpsywk Eljfx Aanefg - 2 x Hogger heads DT 10 (2 x approx. 5.8 kW) - Spray unit for liquid anti-adhesive EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue + premelter) SP30 (High Melt + Edge Control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for coils (No. 6 positions) - End trimming unit IT 90-S (2 x approx. 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°–25° - Multifunctional unit (radius milling and contour milling) AR 30 (2 x 0.35 kW) - Left: 2 x Universal milling units for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0°–90° - Right: Universal milling unit for grooving/rebating and profiling FB 30 (1 x approx. 5 kW) 0°–90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 – spray aggregate (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower – edge trimmer PH 10 OPTION: D.O.M. stacker with carrier column and mobile jib (with vacuum suction cups) for unloading and stacking edge-processed panels.

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 2.800 mm, ketebalan tepi (maks.): 20 mm, model controller: IMATRONIC MT, The machine has the following configuration: Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt adhesive tank, pre-press for hot-melt adhesive Edge Bonding + Edge Processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic cycle Unit 5: Milling unit (1 motor) with automatic cycle Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height, min.: 8 mm Panel height, max.: 60 mm Panel width, min.: 280 mm Panel width, max.: 2,800 mm Edge thickness, min.: 0.4 mm Edge thickness, max.: 20 mm Distance between chain feed lugs: 1,000 mm MACHINE DETAILS Hfedpsyttrxjfx Aansg Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6561

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 90 mm, lebar benda kerja (maks.): 3.200 mm, panjang benda kerja (maks.): 3.200 mm, ketebalan tepi (maks.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units, left side: 5 Milling unit (AS10) Double finish milling cutters, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraper Polishing (2 motors) Spraying device TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 90 mm Max. panel length: 3,200 mm Max. panel width: 3,200 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm EQUIPMENT Feed chain with carriers Pressure with rubber belt Panel guide rails with NC positioning Edge spool magazine with 6 positions Hot melt glue system for PUR adhesive NORDSON Roller set for edge pressing Hjdpfx Aeyq Avhoanofg 4 pressure rollers with NC positioning Spraying device mounted on top cabinets The machine is sold and delivered in its actual and legal condition ("as seen and agreed") on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7685

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dokumentasi / manual, dua sisi, Zusätzliche Ausstattung: Trennmittelsprühvorrichtung oben/unten / Doppelvorschneider Längs/Quer: 6,6 kW mit elektropneumatischer Steuerung / Leimauftragsstation A3 – 2 Walzen / Profilfräsaggregat FF12 oben/unten mit 12.000 U/min / Finish-Aggregat FA11 oben/unten / Stufenlos verstellbare Anschlagschablonen mit maximalem Schablonenauszug von 25 mm / Standardfräsaggregat SF20 6,6 kW / Vorschlichtaggregat 0,55 kW PUR OTT 2-kg-Schmelzstation Vorteile der Maschine Technische Maschinenvorteile Werkstückdicke: 12 – 40 mm / Mindestwerkstückgröße (LxB): 250 x 240 mm / Maximalwerkstückgröße (LxB): 2500 x 1200 mm / Maximalwerkstückgewicht: 50 kg Hfjdpfsxwui Esx Aanjg Kantenmaterialstärke (Rollenware): 0,4 – 3 mm / Maximale Kantenquerschnittsfläche (Kunststoff): 135 mm² / Maximale Kantenquerschnittsfläche (Furnier): 100 mm² / Maximaler Rollendurchmesser: 830 mm Längsbearbeitungsgeschwindigkeit: bis zu 35 m/min für dünne Kante bis 0,6 mm / bis zu 30 m/min für dicke Kante bis 3 mm Querbearbeitungsgeschwindigkeit: bis zu 30 m/min beim Plattenzuschnitt / bis zu 20 m/min bei der Kantenbearbeitung Mindestwerkstückabstand: 500 mm

Kondisi: sangat baik (bekas), COMPLETE 4-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: Hfsdsun N Dlspfx Aansg A) W06027 1st Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /440 /A /R3 B) Rotation Station (90°) C) W06028 2nd Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /190 /B /R3

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (option 3000) Cam spacing (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transmission bar (Master & Slave systems) Hodeu Ekbnspfx Aanofg FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Open station EDGE BANDING PROCESSING (for each side): Gluing station (hot melt adhesive) 283.205 Edge pressure zone. Edge magazine for rolls (No. 2 fold) End trimming unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min, servomotor) Milling unit 08.055 (KW 0.66 x 2) 0°-30° Multi-function unit (radius milling and profile milling) 08.342 (KW 0.66 x 2) Sprayer unit (for polishing liquid) Open station (for optional addition of a scraper) Buffing unit 08.617 (KW 0.18 x 2)

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures Hfsdpfeifnxxox Aanog PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) EDGEBANDING SECTION (each side): Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Double-sided edge sanding line consisting of two machines, each equipped with 6 sanding units. Hfedjuyizcspfx Aaneg

Kondisi: bekas, Double-sided Grinding and Polishing Stand MEYER Type SMP Machine No. 848 Year of Manufacture: 1963 Shaft diameter: 50 mm Grinding wheel mounting: Ø 305 mm Wheel spacing: 1470 mm Max. grinding/polishing wheel diameter: 800 mm Working height: 550 mm Speeds: 710 / 800 / 950 rpm Hfodpfx Ajdzqmhjanog Drive power: 2x 3 kW Mains connection: 380 Volt, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor individually - Speed adjustment via repositioning of drive belts - Dust extraction flange Ø 100 mm - Fitted with 2 corundum grinding wheels, 40 mm wide, Ø approx. 560 / 480 mm Space requirements (L x W x H): 1700 x 1200 x 900 mm Weight: 850 kg Good condition

Tahun pembuatan: 2026, Kondisi: baru, hobelmaschine_winter_duomax_400_hu Hodpfsyk Ibpex Aanofg

Tahun pembuatan: 2026, Kondisi: baru, Hobelbreite 610 mm WINTER DUOMAX 610 CE SPIRAL Maschinenbeschreibung Hedoyk Ibcspfx Aansfg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: 10229, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 25.000 h, daya: 13 kW (17,68 hp), tegangan masuk: 400 V, arus masuk: 32 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, lebar sabuk penghalus: 200 mm, panjang sabuk penggiling: 1.800 mm, tinggi penggerindaan: 190 mm, jenis penyesuaian ketinggian: listrik, jenis aktuasi: listrik, tinggi total: 1.890 mm, panjang total: 2.070 mm, lebar total: 1.020 mm, berat keseluruhan: 1.500 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, Mesin dalam kondisi sangat baik, jarang digunakan, dengan kemungkinan rekondisi menurut kesepakatan. Hodpfx Ajyt Hkujansfg

Kondisi: bekas, nomor mesin/kendaraan: 007809, Jenis tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR Mesin pelapis pinggir: Mesin 1 Lebar panel maksimum: 1200 mm Hedjyhbn Dopfx Aanefg Kecepatan maju maksimum: 40 m/menit Unit kerja, sisi kanan: 8 unit Unit kerja, sisi kiri: 8 unit

Kondisi: bekas, nomor mesin/kendaraan: 008121, Jenis pinggiran yang terpasang: pinggiran tipis, pinggiran tebal, kayu solid Sistem perekat: PUR Agregat multifungsi: ya Lebar panel maksimum: 3000 mm Kecepatan maju maksimum: 32 m/menit Unit kerja, sisi kanan: 10 unit Unit kerja, sisi kiri: 10 unit Hsdpfx Aew Idhtoansfg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, DISKUS DDS 750 XR – Technische Daten Maschinentyp: Vertikale Doppelscheiben-Schleifmaschine Modell: DDS 750 XR Schleifscheibendurchmesser: 750 mm Maximale Schleifbreite (Durchlauf): 180 mm Hfjdpfx Aaswwrqcenog Maximale Materialstärke (Durchlauf): 30 mm Maximale Schleifbreite (Einstechschleifen): 300 mm Maximale Materialstärke (Einstechschleifen): 80 mm Antriebsleistung Schleifspindel 1: 48 kW Antriebsleistung Schleifspindel 2: 48 kW Maximale Umfangsgeschwindigkeit der Schleifscheibe: 63 m/s Kühlschmittelführung: durch die Spindelmitte Beschickungstyp: Rundtisch-Beschicker Beschickungsgeschwindigkeit: 20 mm/min bis 240 mm/min Steuerungssystem: Siemens 840 D CNC Gesamthöhe der Maschine: ca. 3.100 mm Gesamtgewicht: ca. 13.000 kg Aufstellfläche: Länge ca. 4.900 mm, Breite ca. 5.000 mm Konstruktionsmerkmale: Dreieck-Rahmen aus Hochsteifigkeit, Linearführungs-Spindeln, 16 CNC-Achsen, Zentralschmierung, Kühlmittel-Filteranlage

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7791, berat keseluruhan: 5.000 kg, tinggi benda kerja (maks.): 25 mm, diameter benda kerja (maks.): 60 mm, DETAIL TEKNIS Diameter benda kerja: 5 - 60 mm Tinggi benda kerja maks.: 1 - 25 mm Jumlah kepala penggerinda: 2 Pengaturan: Dua sisi (atas, bawah) Diameter luar batu gerinda: 457 mm Kecepatan putar batu gerinda: 24 m/s DETAIL MESIN Hodpfsyhn Dljx Aanjfg Tegangan: 380 V Daya motor penggerinda: 2 x 15 kW Dimensi & Berat Dimensi (P x L x T): 4.000 x 3.000 x 2.700 mm Berat mesin: sekitar 5.000 kg