Beli Illig Mesin Thermoforming bekas (78.204)

Kondisi: diremaj di bengkel (bekas), Maximum forming area: 960 x 660 mm Minimum forming area: 210 x 170 mm Maximum sheet size: 1000 x 700 mm Minimum sheet size: 310 x 210 mm Maximum sheet thickness (manual loading): 12 mm Maximum sheet thickness (automatic loading): 10 mm Maximum tool height: 490 mm Maximum draw depth: 300 mm (pos./neg.) Total connected load approx.: 64.0 kW / 115 A Knjdpfxswf Dvao Ac Hja Technical features: - Siemens Simatic S7-300 control system, Panel OP 37 - Air-conditioned control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for top heater - Individual emitter control for bottom heater - Parallel clamping frame - Pneumatic motor locking for upper reducing frame - Cylinder locking for lower reducing frame - 4 cooling fans - Adjustable vacuum for undermount via cascade control - Adjustable pre-blow / demoulding via cascade control - Large front access for tool change - Sag control for film via photocell with support air - Automatic tool changing system Undermount: 1. Tool clamping via vacuum 2. Tool change via pneumatically actuated ball rollers Upper plunger: 1. Motorised remote adjustment for stroke limitation 2. Pneumatic quick-release tool clamping system Sheet feeding: - Automatic motorised lifting of the film transport chain - Pneumatic quick-release system for suction plates - Motorised centring of plastic sheets - Separate vacuum pump for textured material Optional retrofitting preheating: - Top heater moves pneumatically, overall field control, emitters can be switched on/off individually via toggle switch - Bottom heater moves pneumatically, overall field control, emitters can be switched on/off individually via toggle switch - Independent temperature control for top and bottom heater via separate controllers in the BE control cabinet (temperature not adjustable via UA operator panel) Optional retrofitting for roll feed: - Cross-cutter and infeed rollers at sheet feeder - Roller stand RO 800

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, lebar film: 1.500 mm, en-001 Knsdpfxoft S Eae Ac Hja

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin DU 1500 x 1000 x 620 T7 No. 98 15254 Ukuran pelat: 1000 x 800 mm Kedalaman tarik: 620 mm Tahun pembuatan: 1998 Arus nominal: 238 A Daya terpasang: 164,5 kW Sistem kontrol: Siemens OP 37 Perlengkapan: • Mesin pengisi • 6 kipas pendingin • Punch atas • Kontrol kelenturan film • Bingkai penjepit yang dapat disesuaikan secara motorik • Flash emitter Knsdpsxmgvcsfx Ac Hoa • Pirometer pemanas • Pirometer pendingin

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, ILLIG Universal Thermoforming Machine Tipe UA 155 4g solo Data Teknis - Kontrol Siemens - Ukuran material maks.: 1500 x 1250 mm - Luas pembentukan maks.: 1450 x 1200 mm - Tinggi alat maks.: 700 mm - Ketebalan material maks.: 12 mm - Daya pemanas: 96 kW - Daya total: 105 kW - Pengaman listrik: 160 A - Kapasitas pompa vakum: 250 m³/jam - Kebutuhan udara tekan: 6 bar Perlengkapan - Pemanas atas dengan kontrol 5 zona HTS (700ºC) - Pemanas bawah dengan kontrol 5 zona HTS (500ºC) Knodpfx Acsxlzqfo Hja - Kipas pendingin D06 - Meja kaskade - Kaskade vakum - Punch atas - Termasuk pendingin ILLIG dan alat tempering ILLIG

Kondisi: bekas, Tahun pembuatan: 1998, ILLIG universal forming machine UA 155 4G + BE 155 P FHZ Technical specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming station: - Schleicher P03 control system - Automatic setup and removal function - Top heating: ceramic heater with 5-zone control - Bottom heating: ceramic heater with 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal beams for use with fixed format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Lower table pneumatic with rapid/traverse speed adjustable in percentage - Upper plug assist with rapid/traverse speed adjustable in percentage - Pre-blowing automatic, adjustable in percentage - Pre-vacuum adjustable in percentage - De-moulding automatic, adjustable in percentage - Sheet sag control via light barrier with supporting air - 6-fold cooling fan Kedexlzrcopfx Ac Hsna - Large front opening for tool change - Vacuum pump Sheet feeding: - Automatic sheet feeding device - Final heating in feeding for final or pre-heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized transport width adjustment

Kondisi: diremaj di bengkel (bekas), Top heating with small individual radiators via toggle switch Bottom heating with large radiator Top die system Protective grid Knedpfx Aofug Anec Hja 4 D05 cooling fans Pre-blow and demolding automation

Tahun pembuatan: 2025, Kondisi: baru, Fully automatic thermoforming machine: Cups/containers are formed, filled, and sealed with film. Suitable for vacuum, gas, and modified atmosphere packaging of food, meat, seafood, fruit, vegetables, medical products, and household goods. Key components are made of stainless steel, with easily exchangeable modular cavities and a water cooling system for the thermoforming tool and sealing module. Vacuum pump by BUSCH (Germany), PLC, touchscreen, and servomotor by OMRON, relays and air switches by SCHNEIDER. Top packaging materials: heat-sealable films; bottom packaging materials: thermoformable sealing film. Both rigid and flexible films can be used. - Specifications: Total power: 380V, 13kW; Compressed air: 1m³/6bar; Vacuum: 0.8–1.0m³/6bar; Water: 4 liters/min; Max. upper film width: 390mm (usable width: 350mm); Cavity length: 200mm; Max. forming depth: 80mm (depth depends on bottom film thickness); Loading area: standard 1m (additional length optional); Packaging capacity: 6 cycles/min; Machine dimensions: L4560×W1020×H1950mm; Weight: 1,500kg. Knjdpov Nkz Ssfx Ac Hja Please note that our new machine prices are often lower than typical used equipment prices. Feel free to contact us with your packaging requirements. – We usually have 30–50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Fully automatic thermoforming machine: Cups/containers are formed, filled, and sealed with film. Suitable for vacuum, gas, and modified atmosphere packaging of food products such as sandwiches, meat, seafood, fruit, vegetables, as well as non-food items, medical products, and household goods. Central components are made from stainless steel, with easily replaceable modular forming molds, water-cooling system for the thermoforming tool and sealing module. Vacuum pump by BUSCH, pneumatic components by SMC, electronic components primarily from Schneider, photo sensors from SICK, PLC and touchscreen by Delta. - Specifications: Top packaging material: heat-sealable films, width: max. 400mm; bottom packaging material: thermoformable sealing film (rigid and flexible films can be used), thickness: 300 - 900µm, width: max. 400mm + 2mm, forming depth: max. 80mm (forming depth depends on the thickness of the bottom film); loading area: standard 120-150cm (additional length available as an option); max. idle cycle rate: 8 cycles/minute; Power: 3P, 380V, 50/60Hz; Compressed air: 1.2m³/min, 8bar. Knodpfsv Nk Acex Ac Hsa Please note that our new prices are often below the typical used prices. Feel free to contact us and let us know your packaging requirements. Typically, we always have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we also offer very short delivery times starting from approx. 3 weeks. All machines come with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Fully automatic thermoforming machine for forming and filling small plastic bottles with liquids, creams or pasty products. Designed for use in the pharmaceutical, food and chemical industries. Thanks to easily interchangeable, modular pockets, bottles of different sizes and shapes can be produced. Suitable for manufacturing multipacks, with the number of bottles freely adjustable. Dosing and filling of the product is carried out by a peristaltic pump, which is characterized by easy operation, cleaning, and adjustment. – Specifications: Packaging materials: PVC/PE composite film, PET/PVDC as an environmentally friendly composite material, PVC/EVOH ultra-high barrier composite film for, e.g., pesticide packaging; Packaging thickness: 0.25-0.35mm; Max. outer roll diameter: 400mm with standard core (70-76mm); Maximum forming depth per side: 12.5mm; Maximum forming area: 120mm x 210mm; Bottle height: 58~108mm; Filling range: 1~50ml/bottle; Max. machine cycle rate in idle: 25 cycles/minute; Power supply: 380V, 50Hz; Power: 17.5kW; Compressed air and consumption: 6bar, 0.4m³/min; Cooling water: temperature 14~18°C, pressure 1.5~2bar, closed circuit 6L/min; Machine dimensions: L7200 x W960 x H1800mm; Weight: 2200kg. Kodpov Nk Aiefx Ac Hjna Please note that our new prices are often lower than typical used prices. Feel free to contact us and tell us about your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with a full warranty.

Kondisi: seperti baru (mesin pameran), jam operasional: 50 h, Uhlmann Thermoforming Packaging System UPS 4 ETX For processing PVC forming film and aluminum lidding foil Base machine in modular technology and balcony construction, with 12 modules: - Forming film unwind unit with 2 pneumatic expansion shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and splicing table for forming film - Indexed forming film unwind - 3-zone contact heating: - 6 heating circuits, individually controllable - simultaneous heating of min. 3 index advances - heating plates open automatically when the machine stops - Forming station with 4-column lift table guidance - Filling section, length 1,360 mm - Safety cover on the filling section Lidding foil unwind on the operator side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4-column lift table guidance: - integrated overload protection - automatic lifting of the upper sealing tool when the machine stops - Free module for the integration of an additional station - Gripper chain indexing - Punching station with blister lowering - Waste cutter with integrated motorised transport of the punching grid - Smoothing station - Perforation station ET/DT - Compressed air supply monitoring with machine stop when minimum value is not reached - Visio Scan - electromagnetically locked safety doors - Fast format change due to: - plug-in format parts - plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase geared motor - Control cabinet at the rear of the machine, swivelling Operator control system: Paccontrol - 10.4" TFT color display with 640x480 pixel resolution - 68C030 processor - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Ejection of individual blister rows, e.g., overheated film in the heating station, products in the sealing station, etc. Machine control: Programmable logic sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controllers, cam switches, etc. - External program memory Technical Data UPS 4 ETX: - Cycle rate: - ET range: min./max.: 15/50 cycles/min. Depending on film quality, feed and format design - Format range: min./max. feed in filling section: 64/226 mm min./max. film width: 100/300 mm min./max. punching width: 28/284 mm max. forming depth: 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar Kodpfx Acstndpzs Hona 4 Simtap feeders

Kondisi: baik (bekas), Tahun pembuatan: 1990, jam operasional: 45.350 h, nomor mesin/kendaraan: 1537, Hybrid machine designed for thermoforming sheets or roll stock. Machine equipped with a BE-type sheet loader without preheating. Fitted with a PR-type roll unwinder. Comes with upper and lower tables. Controlled by a Schleicher PDPF process controller. Fast clamping system for reduction frames and tooling. Maximum working width: 700 mm. Knjdpfxjtv Ivzj Ac Hea Maximum sheet size: 1000 x 700 mm. Maximum sheet thickness: 10 mm. We will take care of dismantling and loading onto your truck arranged for collection.

Kondisi: baik (bekas), Tahun pembuatan: 1990, jam operasional: 11.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1531, lebar film: 700 mm, jenis arus masuk: AC (pendingin udara), lebar total: 700 mm, panjang total: 3.500 mm, tinggi total: 3.500 mm, tegangan masuk: 400 V, daya pompa vakum: 3.000 W, sambungan udara terkompresi: 6 batang, lebar kerja: 700 mm, kapasitas pompa: 100 l/menit, tinggi cetakan (min.): 300 mm, lebar kabinet kontrol: 1.000 mm, suhu operasional: 650 °C, UA 100 1G thermoforming machine, year 1990, in good working condition. Maximum sheet dimensions: 1000 x 700 x 10 mm Upper heating: 3 pilot emitters, lower heating: 1 pilot emitter Motorized adjustable plug assist height Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubble blowing with photoelectric cell Adjustable bubble intensity and demolding sequences can be stored → cascading pneumatic valves BUSCH vacuum pump, 100 m³/h Machine decommissioned and stored following replacement by a new ILLIG UA 4G automatic machine Ksdpfx Acjt Iracs Hsna Offered price refers to the machine disassembled and loaded onto your truck Can be recommissioned if you wish to inspect the machine on site

Tahun pembuatan: 1996, Kondisi: bekas, Tahun pembuatan 1996 Pembentukan termo, pemotongan dengan mesin potong, digunakan untuk memproduksi dari film PET, PVC, PS, PLA, dll. Area kerja 500 x 740 mm Tinggi pembentukan: 150 mm Lebar film maksimum: 540 mm Ketebalan film hingga 1,5 mm Daya terpasang: 13 kW Pompa Busch Sistem kontrol baru. Knedpfx Acjzu Nx No Hea Mesin telah diperbaiki pada tahun 2020 dan berfungsi penuh, dapat dilihat saat beroperasi di dekat Warsawa. Harga: 23.000 EUR

Tahun pembuatan: 1986, Kondisi: bekas, Tahun pembuatan 1986 Tiga stasiun (pembentukan, pemotongan – meja atas bergerak, penumpukan) untuk produksi kemasan dari film PVC, PS, PET, PLA. Kedpfx Acjzu Nw Ee Hona Dilengkapi dengan pemanas bagian atas. Luas area pembentukan maksimum 500x350 mm Tinggi/kedalaman pembentukan maksimum 40/100 mm Lebar film maksimum – 550 mm Ketebalan film 0,2-0,6 mm Mesin ini memiliki daya 23 Kw. Kapasitas pompa vakum 40 m³/jam Mesin telah menjalani perbaikan menyeluruh pada tahun 2021, berfungsi dengan baik, dan dapat dilihat beroperasi di dekat Warsawa. Harga 35.000 EUR

Tahun pembuatan: 1987, Kondisi: bekas, Tahun pembuatan 1987. Tiga stasiun (pembentukan, pemotongan – meja atas yang dapat bergerak, penumpukan) untuk memproduksi kemasan dari film PVC, PS, PET, dan PLA. Dilengkapi dengan elemen pemanas bawah dan atas. Luas area pembentukan maksimum: 500x350 mm. Tinggi/kedalaman pembentukan maksimum: 40/100 mm. Lebar film maksimum: 550 mm. Knedpfxjzu Nvue Ac Hoa Ketebalan film: 0,2-0,6 mm. Daya terpasang: 23 kW. Kapasitas pompa vakum: 40 m³/jam. Mesin telah direkondisi secara menyeluruh pada tahun 2021, berfungsi penuh, dan dapat dilihat dalam keadaan beroperasi di dekat Warsawa. Harga: 35.000 EUR.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, trans_001 Knjdpeylbrkofx Ac Hoa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, machineseeker-de-001 Knedpeyyplcefx Ac Hea

Kondisi: Pembawa suku cadang rusak (bekas), Manufacturer: Illig Model: HSA 50C Knjdpfx Acjuk Dwfo Hoa The machine is incomplete and not operational! For spare parts only!!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 616, jenis arus masuk: AC (pendingin udara), tegangan masuk: 240 V, sambungan udara terkompresi: 6 batang, lebar film: 480 mm, arus masuk: 16 A, Untuk dijual: Blister machine ILLIG HSA 50 C, tahun produksi 1991. Ini adalah mesin blister welding otomatis throughput tinggi dengan pengumpan kartu, untuk ketebalan film antara 150 µm hingga 400 µm (mungkin lebih tebal, tetapi belum pernah diuji secara langsung). Lini produksi ditawarkan lengkap (lihat foto). Kecepatan: 1–9 siklus/menit pada konfigurasi 4-cavity. Contoh: dispenser aroma, 4 produk per baki blister = 2000 blister/jam. Dimensi sekitar 9m x 1m x 2,25m. Ukuran pallet segel: 57x32 cm. Mesin 100% berfungsi dan masih beroperasi. Inspeksi dan uji coba dapat dilakukan sebelum pembelian. Lokasi: Republik Ceko (10 menit dari perbatasan Bayern/Republik Ceko dekat Furth im Wald). Kodpfx Acey Anife Hsna

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 748 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5231847, jenis arus masuk: tiga fasa, lebar total: 3.988 mm, panjang total: 4.740 mm, tinggi total: 3.440 mm, tegangan masuk: 400 V, sambungan udara terkompresi: 6 batang, berat keseluruhan: 2.700 kg, Mesin pembentuk termos plastik lembaran Mesin untuk memproses bahan setengah jadi Kjdpfxeznbp Te Ac Hona Ukuran lembaran maksimum 1.000 x 700 mm Ukuran lembaran minimum 300 x 210 mm Ketebalan lembaran maksimum 12 mm Ketebalan lembaran minimum 0,5 mm Mesin ini dilengkapi sepenuhnya dan siap digunakan dengan sistem pengumpanan otomatis. Dilengkapi dengan fungsi untuk cetakan atas dan bawah, serta cetakan berpendingin air. Pengaturan cerdas melalui parameter material yang telah disimpan. Harga sudah termasuk gergaji horizontal GEISS Horizontalbandsäge HBS 1000.

Kondisi: bekas, Tahun pembuatan: 1990, Verpackungsmaschine-Illig-SB53C-1990 Knjdpfoxm Sa Hex Ac Hoa

Tahun pembuatan: 2011, jam operasional: 29.420 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Merek: Illig Model: RDK 80 Tahun: 2011 Perkiraan Jam Operasi: 29.420 Stasiun: Pembentukan, Pelubangan, Robot, Pemotongan dan Penumpukan Tanggal Pengiriman: Segera Area Pembentukan Maks: 756 x 565 mm Lebar Lembaran Maks: 805 mm Kedalaman tarik: 120 / 120 mm Gaya Punching Pisau Baja: 600 kN Siklus Maksimum per Menit: 55 Tekanan Pembentukan: 6 bar Semua detail dapat berubah dan/atau terdapat kesalahan. Seluruh peralatan tergantung ketersediaan dan/atau penjualan sebelumnya. Knedpfezam Hcjx Ac Hja

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, LENGKAPNYA LIN PRODUKSI EKSTRUSI LEMBARAN AMUT DAN TERMOFORMING ILLIG Lin produksi ekstrusi lembaran AMUT: Kecepatan kerja maksimum 30 m/menit Ekstruder utama (lapisan A) EA100 / 35D Koekstruder kanan (lapisan B) EA600 / 33D Bahan yang diproses: PP, PS, atau HIPS Produksi per jam hingga 450 kg/jam Lebar lembaran maksimum 720 mm Ketebalan lembaran minimum/maksimum 0,15 / 1,8 mm Kepala ekstrusi lembaran Amut Kedpfxozgtf Do Ac Hjna Kalender dengan lebar 1000 mm Diameter rol pemanas 600 mm Mesin termoforming ILLIG Model RDKP Lebar lembaran maksimum 805 mm Diameter gulungan maksimum 1600 mm Berbagai macam cetakan disertakan 4 lini produksi lengkap tersedia Tahun 2010

Tahun pembuatan: 2006, Kondisi: baik (bekas), Illig SK 74-C from an assisted workshop Year of manufacture: 2006 Serial no.: 426-0172 Includes 2 pallets with approximately 38 rolls of film Knsdpfjr Nv E Nex Ac Hja Dimensions (approx. in mm): 2200 x 1600 x 1600

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Data teknis: • Meja putar 4 stasiun • Maks. luas penyegelan 350 x 250 • Maks. kedalaman blister 70 – 100 mm tergantung jenis produk • Gaya penyegelan 12.800 N • Daya pemanas penyegel 1,75 kW • Penyuplai karton • Penyekat kemasan • Unit pembentuk karton • Kabel dengan steker CEE 16A Knjdjfua Dcopfx Ac Hja • Berat sekitar 750 kg Mesin tersedia dalam semua varian b, b-2, b-3, b-4.