Beli Mütek Mrz 1530 bekas (355)

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Dcodsffh Atepfx Alyok Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: baik (bekas), Used, good condition. Technically inspected used machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (for example for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optional production of short briquette tablets possible Technical data: Throughput rate up to max. 750 kg/h (depending on material) (e.g. sawdust with a bulk density of 250 kg/m³) An exact statement on throughput can only be made after testing with your material, as this may vary significantly depending on bulk density. Customs tariff number: 84793010 Briquette diameter: 65 mm including 2 m press channel Main motor power: 37 kW Feed screw gear motor: 2.2 kW Compactor screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with operating hour counter in switch cabinet Machine bears CE mark Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3800 kg Options at extra cost: Temperature control unit for press tools For maintaining optimal temperature and briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch. Wired ready for operation – essential for functionality including corresponding control system + €7,850 net Guillotine or tablet breaker, For cutting briquettes to length + €6,900 net Connection to compressed air required! Silo for MAP series + €19,940 net Djdpfx Aljfmqq Ejyjck – Storage silo above machine – Capacity approx. 6 m³, robust steel construction with agitator discharge and level indicator. Transport pipe / cooling section (nominal size: 4x2m) Every 2 meters €990 net Assembly / commissioning (nominal: approx. 2–3 days on site) Billed by time and material. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Saturday/night hours: 50% surcharge Sunday and holiday hours: 100% surcharge Per diem per technician: depending on country Per car/van and driven kilometer: €0.98 / km Travel and accommodation: reimbursed based on receipts or by flat rate, borne by the client. Testing with customer material: (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for raw material: – Moisture content (atro) must be at least 6% and no more than 15% – Chip length max. 18 mm – Installation temperature: heated space, at least +5°C – Feedstock must be free of metals and mineral impurities. Damage to press tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Ideal for shredding Styrofoam or similar materials Throughput highly dependent on screen size and input material: - Up to 60 kg/h with EPS using a 15 mm screen Dcodpoh S H T Uofx Alyjk *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW - 400 Volt Robust steel construction Hardened cutting knives Screen with interchangeable inserts Available perforations: (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive equipped with star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 150 mm Optional for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and one swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (L x W x H) Weight approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement Dedpfxed Su Hxj Alyock New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: baik (bekas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Dsdpforb D Njx Alyjck Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V

Kondisi: baru, Tahun pembuatan: 2026, Mesin ideal untuk penghancuran kayu lunak. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Diameter rotor: 260 mm, Dcedpfx Alowzarcoysk Pendorong digerakkan secara hidrolik Lubang saringan sesuai pilihan (12 - 40 mm) Diameter saluran hisap Ø 160 mm Berat sekitar 1.100 kg Dimensi (p x l x t) sekitar 1805 x 1118 x 1650 mm Warna: biru / abu-abu Persyaratan bahan baku: - Kadar air (atro) harus di bawah 30 % - Logam dan kontaminan mineral seperti pasir, batu, dsb. meningkatkan keausan. Kami dengan senang hati menawarkan pengujian gratis menggunakan material Anda. Anda dapat datang ke lokasi kami di Neckartailfingen, atau kirimkan material Anda melalui ekspedisi dan kami akan mendokumentasikan pengujiannya dengan foto dan video.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Djdpsd Nnwlefx Alysck Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Tahun pembuatan: 2025, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for post-shredding of wood chips. Further details can be provided after testing with your specific material. Dcedpfed N Dn Dex Alyok Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for various size-reduction applications. For example, in injection molding, rejects and sprues are produced that need to be reprocessed. In blow molding, in addition to rejects, there are parisons or start-up waste. The system can process blow molding materials such as PET bottles, PE/PP bottles, canisters, buckets, pipes, and more. Material is fed from above via a hopper into the cutting chamber of the granulator. Inside, a rotor equipped with cutting knives shreds the material between the rotating knives and the stationary counter-knives mounted in the chamber until it passes as regrind through the screen located below the rotor. *Option: The ground material is usually transported pneumatically into big bags, silos, or other containers. The price applies only to the shredding plant as shown in image 1 - fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length Post-shredding to approx. 6 mm Throughput up to 50 kg/h with 6 mm screen (Throughput up to 80 kg/h with 8 mm screen) ___ For G30 wood chip post-shredding, much higher throughputs can be achieved: Up to a maximum of 400 kg/h with a 10 mm screen, *metered feed, e.g., via conveyor or auger. Further details after testing approx. 30 kg sample. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Suction connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm - additional screen sizes available Price per screen: €390 Price for replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Parts from injection molding, blow molding, sprue waste, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as an option: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optional with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optional with matching extraction/transport system --- For system design, the following information is important: - Length x width x height of the input material? - Screen size: what final particle size (mm) is required? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos can also be helpful.

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding hardwood and softwood Another machine available immediately (ex works Neckartailfingen) - Motor: 18.5 kW; 400 V - 50 Hz - 3 phase - Knives: 14+2 pieces, 40x40 mm, reversible multiple times Dcjdpfx Ajd E R D Solyjk - Rotor diameter: 260 mm - Control: Omron PLC - Cutting chamber opening: 600 x 800 mm - Hopper volume approx. 0.6 m³ - Hydraulically actuated ram - Screen perforation selectable (12 – 40 mm) - Extraction nozzle Ø 160 mm - Weight approx. 1,300 kg - Dimensions (LxWxH) approx. 1,737 x 1,167 x 1,650 mm The following options are available at an additional cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the ram from jamming; recommended for materials less than 3 mm thick) - Shredder height increase by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely needed; enclosed, even more durable rotor bearing. Worth considering for screens < 15 mm or for a high proportion of fines. Not necessary if bearings are greased every approx. 2 weeks in operation) Raw material requirements: - Moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear We would be happy to offer you a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Dcjdpfx Aogmfa Aslysk Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, Extremely powerful industrial magnet for iron separation Special price €990 net (Shipping €14.90 net) *You can find the construction lengths in picture 2 The effective surface features a stainless steel end plate (material 1.4301). For installation, there are threaded holes on the rear side. *Handle available upon request The block magnet systems can be used at a maximum operating temperature of up to +100°C. The magnet surface should be cleaned regularly from the collected iron parts. Attraction distances for all types, e.g.: Dcodpfxetqfhxj Alyjk For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, "iron parts jump onto the magnet's gripping surface". Installation example 2: Mounted in a pipeline system with direct contact to the material flow. For high separation reliability, the installation of several block magnets in a cascade arrangement is possible. Installation and safety instructions: When handling, already during unpacking and later during installation, ensure that no loose iron parts, such as tools or screws, are lying nearby. The magnetic force is so strong that painful injuries can occur if fingers are caught between iron parts and the magnet’s active surface. No steel parts should be located within a minimum distance of 400 mm beneath the active surface.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, translate-001 Dodpfodv Eu Hox Alyock

Tahun pembuatan: 2024, Kondisi: baru, Overview – Various Configuration Options *Not all items may be required: Optional: - Bale Breaker MHB starting from €24,990 net - Straw Mill MHZ starting from €7,980 net - Special Hopper €970 net - Cyclone from €3,750 net - Sheet Metal Silo demonstration unit with discharge (only sketched in the picture) *Optional, if feeding by wheel loader is desired Unit price net from €14,750 – demo unit - Dedusting Screw Conveyor – approx. 4 m length Four screens are mounted underneath for suction extraction. Net unit price from: €9,750 - Exhaust Components / Hoses flat rate €945 net - Control System for Complete Plant Net unit price: €2,750 - Demonstration Unit Extraction Device MMJET 160, with cleaning system Dodpsff Sbijfx Alyjck Connection: 160 mm Fan 2.2 kW Airflow: 1850 m³/400 V Automatic compressed air cleaning Net unit price from: €6,950 - Baling Press B 400 Bale size approx. 400 x 400 x 800 mm (height adjustable) Up to 30 bales per hour at ±20 kg From €59,995 net * A reference installation (baling press) is located at postal code: 64579 Gernsheim Technical Data: Bale size (WxDxH): 400 x 400 x 800 mm (height adjustable on request) Bale weight ±20 kg (material-dependent) Performance: approx. 30 bales per hour Feed hopper capacity: approx. 0.7 m³ Min./max. level sensors in hopper Hydraulic pre-compactor Hydraulic pressing ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in pressing channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight: approx. 1,500 kg mütek baling presses / packaging machines are designed for producing bales from a wide variety of materials such as shredded miscanthus or elephant grass, wood chips, sawdust, and chopped straw. These machines feature robust construction, ensuring consistent quality during continuous operation. The baling press compacts material filled into the storage hopper by hydraulic pressure without the use of binding agents and packs the material into plastic bags. The material volume can be significantly reduced using the baling press. The volume reduction factor depends on the material. The maximum material moisture content must not exceed 18% ATRO. The hopper of the mütek baling press can be loaded automatically or manually and has a capacity of approx. 0.7 m³. Hoppers with higher volumes or with integrated extraction and filter systems as complete disposal units are also available. In addition to automatic feeding by deduster, mütek offers feeding by screw conveyors. For both options, automatic dedusting is possible. mütek baling presses are equipped with a control cabinet. In standard version, bale dimensions are (WxDxH): 400 x 400 x 800 mm. Height can be adjusted to customer requirements on request. Baling offers the following advantages: - Simple and safe storage - No loose dust - Minimization of storage space - Low transport volume *Raw Material Requirements: - Dry (max. 30% ATRO) - Maximum length 35 mm

Kondisi: baik (bekas), Overhauled used machine *Optional features available at extra cost, see below with full 1-year warranty Ready for delivery approx. 16 weeks after order Dcsdpfo E Dqusx Alysk Technical specifications: Throughput rate up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Includes 2 m press channel Main motor power: 45 kW Feed auger geared motor: 2 x 2.2 kW Compactor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and utilization display for main drive and feed screws Siemens S7/300 PLC control with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 4,500 kg Options: Silo for MAP series (suitable only for one MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT -Temperature control unit for press tools To maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch Fully wired and ready for connection — essential for operation including corresponding control unit €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT -Transport line / cooling section (nominal: 4 x 2 m) Per 2 meters: €990 net Assembly / commissioning (nominal per press: approx. 2–3 days on site) Charged according to actual time; invoiced separately. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Surcharge for overtime: +25% Saturday and night hours: +50% surcharge each Sunday and holiday hours: +100% surcharge each Daily allowance per technician per day: country-dependent Per car/van and driven kilometer: €0.98/km Travel and accommodation billed at cost or by flat rate to the customer’s account. Testing with customer’s own material: (by agreement, up to max. 750 kg) — flat rate €1,970 net ---- Requirements for raw material: - Moisture content (atro) must be at least 6% and max. 18% - Maximum chip length: 20 mm - Installation temperature: heated room, minimum +5°C - The feed must be free from metal and mineral contaminants. Damage to the press tools and/or increased wear may result.

Kondisi: bekas, mgz1330-en Dsdox Tfdhepfx Alyeck

Kondisi: sangat baik (bekas), Laser cutting machine for steel SUDA FC 1530 Material / metal Laser type / fiber laser Cutting area / 1500x3000 mm Cutting thickness / depends on processed materials Laser source brand / RAYCUS RFL-C1000 Operating mode / continuous wave Configuration / 3-axis Supported cutting products / sheet and tube Cooling / air and liquid cooled using S&A CWFL-1000 chiller Cutting speed / depends on material Supported graphic formats / AI, PLT, DXF, BMP, DST, DWG, LAS, DXP CNC / yes Laser head brand / WSX Servo motor brand / Schneider Guide brand / THK Control system brand / Cypcut Control system Operating system / CYPCUT system Dodpfxovkf Rdo Alyock Power supply / 1000W Laser wavelength / 1080 nm Working size / 1500*3000 mm Positioning / Red dot Height: 1850 mm Width: 2111 mm Length: 3450 mm Weight (kg) / 2500 kg The listing concerns a SUDA FC 1530 steel laser cutting machine + S&A CWFL-1000 chiller !The sheet metal straightener is listed separately!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 28 t, berat benda kerja (maks.): 200 kg, lebar kerja: 3.080 mm, panjang kerja: 1.560 mm, Bagian-bagian mesin berikut telah diperbarui: Sistem pneumatik Festo Sistem kontrol Labod yang baru Penggantian bantalan pada sumbu Y Djdpfx Aszl Sraolyock RINCIAN TEKNIS Area kerja: 1.560 × 3.080 mm Panjang lembaran logam melalui reposisi: maks. 9.999 mm Gaya pemotongan hidrolik: maks. 280 kN Berat benda kerja: maks. 200 kg Kecepatan pemosisian sumbu X: maks. 60 m/menit Kecepatan pemosisian sumbu Y: maks. 60 m/menit Kecepatan pemosisian simultan sumbu X dan Y: maks. 85 m/menit Jumlah langkah dengan sistem hidrolik standar: maks. 250 langkah/menit Jumlah langkah dengan sistem hidrolik cepat: maks. 800 langkah/menit Catatan: Mesin sudah dalam keadaan terurai.

Kondisi: baik (bekas), jarak tempuh: 379.266 km, daya: 220 kW (299,12 hp), pendaftaran pertama: 12/2020, jenis bahan bakar: diesel, ukuran ban: 285/70R19,5, konfigurasi gandar: 4x2, jarak roda: 5.350 mm, bahan bakar: diesel, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: baja-udara, panjang total: 10.270 mm, lebar total: 2.550 mm, tinggi total: 3.330 mm, panjang ruang muatan: 8.210 mm, lebar ruang muat: 2.440 mm, tinggi ruang muatan: 2.130 mm, Tahun pembuatan: 2020, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kopling trailer, pemanas jok, pendingin udara, pengaturan jendela elektrik, spion elektrik, tail lift,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 14.052 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M15305531R, akurasi pengulangan: 0,02 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 305 mm, akurasi pemposisian: 0,07 mm, berat benda kerja (maks.): 1.450 kg, jenis arus masuk: tiga fasa, tegangan masuk: 380 V, kecepatan perjalanan (maks.): 12.500 mm/menit, Mesin MAXIEM 1530 II Dsdpfx Aoyglpcolysck Pompa 30HP (22KW) Tangki abrasive 1000 kg. Dalam operasi terus-menerus, servis dilakukan setiap 500 jam.

Kondisi: baru, Tahun pembuatan: 2026, The INDUSTRY 2.0 series distinguishes itself from the standard series through the use of the highest-quality, most precise motors and drive gearboxes in its class, significantly enhancing the machine’s processing capabilities and making it the most industrialized series in this price segment. The INDUSTRY 2.0 series CNC milling router, with a working area of 1500 x 3000 mm and a Z-axis clearance of 300 mm, is equipped with a 6 kW electrospindle running at 24,000 rpm on ceramic bearings. The machine's worktable is designed using hybrid technology, featuring both vacuum zones and sub-zones for automatic, non-invasive clamping of workpieces, in addition to T-slot grooves for manual clamping. Included with the milling machine is a Becker KVT 3.140 vacuum pump. Manufacturer: TechnologieCNC Model: 1530 INDUSTRY 2.0 Electrospindle: 6 kW, 24,000 rpm on full ceramic bearings Maximum working speed in slow passes: up to 33 m/min Maximum working speed in material: up to 25 m/min Software resolution: 0.01 mm Mechanical resolution: 0.04 mm Working area X/Y/Z: 1500x3000x300mm - Hybrid table (vacuum + T-slot) Control system: NK-105 controller High working speeds and processing stability are ensured by the use of Leadshine EASY-SERVO servo drives with encoder technology and power transmission via a SHIMPO planetary gearbox Software: CAD/CAM standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Dimensions: For transport – 365 / 210 / 220 Assembled and ready for operation – 365 / 245 / 230 A hybrid table, i.e., a vacuum table allowing for non-invasive mounting of the workpiece, with the option for manual clamping of irregularly shaped components Dcodpfx Alotu S Srjysk The machine frame is fully welded, annealed, and subsequently milled, ensuring precise machining and operational stability Machine control via NK-105 DSP controller Tool height sensor included in delivery Centralized oil lubrication system for carriages and guides as standard Power is transmitted via a reduction gearbox The machine moves on all axes (X, Y, Z) using high-quality guides and PMI 25 mm linear bearings LEADSHINE Easyservo dual servo drive on the Y-axis The machine wiring consists of high-quality, flame-retardant cables Electrical cables used in the construction of the milling machine are flexible and protected against deformation.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Siemens, jenis laser: laser serat, produsen sumber laser: Max Photonics, model sumber laser: MAX 6 kW mit CE, daya laser: 6.000 W, ketebalan lembaran (maks.): 25 mm, ketebalan pelat baja (maks.): 25 mm, ketebalan maksimum lembaran baja tahan karat: 20 mm, tebal plat aluminium (maks.): 15 mm, ketebalan lembaran kuningan (maks.): 10 mm, ketebalan pelat tembaga (maks.): 10 mm, panjang meja: 3.000 mm, lebar meja: 1.500 mm, panjang kerja: 3.000 mm, lebar kerja: 1.500 mm, akurasi pemposisian: 0,3 mm, akurasi pengulangan: 0,3 mm, tegangan masuk: 380 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jenis pendinginan: air, sambungan udara terkompresi: 8 batang, berat keseluruhan: 8.000 kg, panjang total: 8.500 mm, lebar total: 3.500 mm, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Fiber Laser Cutting Machine 1530, 12 kW – Overview Safety & Protection Fully enclosed metal safety housing with doors and windows equipped for laser radiation protection. Environmentally friendly and operator-safe. Work Platform Elevated and lowered dual-level platform: Front section: Laser cutting. Rear section: Loading and unloading. No mutual interference → increased work efficiency. Machine Structure 10 kW bed structure: Time-segmented, zoned dust extraction. Dcjdpfxsy R I Nhj Alyjk Efficient heat dissipation, highly resistant to thermal impact. Industrial auxiliary components: Air conditioning, dedicated refrigeration system, constant temperature & humidity → stable performance & longer service life. Precision Guarantee Bed processed with large gantry milling machine. Industrial-grade linear guides, gears, and lead screws. Full servo control with double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration using laser interferometers Meticulous craftsmanship, simplified maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software suite: Industry-standard, secure, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core Components BOCI BLT442 laser cutting head MAX 6 kW laser source, CE certified HANLI 6 kW water chiller TAIWAN DTX 30+20+20 linear guideways TAIWAN JT machine frame Germany Techmach reducer 2 cameras BOCHU servo motor Felton proportional valve SCHNEIDER electronic components Triple gas inlet: nitrogen, oxygen, air Automatic lubrication oil supply system Accessories 30 protective lenses, 30 nozzles, toolbox. Optional: ARS-30HP-XF-1 air compressor, 1.6 MPa; 7.5 kW dust collector.

Kondisi: bekas, jarak tempuh: 42.121 km, daya: 220 kW (299,12 hp), pendaftaran pertama: 03/2021, jenis bahan bakar: diesel, berat muatan maksimum: 8.318 kg, berat keseluruhan: 15.000 kg, konfigurasi gandar: 4x2, jarak roda: 3.260 mm, warna: merah, kabin pengemudi: lain, tipe perpindahan gigi: semi-otomatis, kelas emisi: Euro 6, suspensi: lain, volume ruang muat: 6 m³, panjang ruang muatan: 4.200 mm, lebar ruang muat: 2.360 mm, tinggi ruang muatan: 600 mm, Tahun pembuatan: 2021, Perlengkapan: hidrolik, kendali jelajah, kopling trailer, kunci diferensial, pendingin udara,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, jenis laser: laser serat, produsen sumber laser: MAX Photonics, daya laser: 3.000 W, panjang gelombang laser: 1.070 nm, ketebalan pelat baja (maks.): 22 mm, ketebalan maksimum lembaran baja tahan karat: 12 mm, tebal plat aluminium (maks.): 10 mm, jarak pergerakan sumbu X: 3.050 mm, jarak lintasan sumbu Y: 1.550 mm, jarak gerak sumbu Z: 120 mm, tegangan masuk: 400 V, jenis pendinginan: air, berat keseluruhan: 3.500 kg, lebar bukaan pintu: 3.000 mm, tinggi bukaan pintu: 600 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, kabin, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, new laser cutting machine with 3kW fiber laser Our aim is to offer highly precise, long-term stable, and affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, along with first-class service. - Incl. 2D bevel cut function for weld seam preparation or production of countersunk holes (see image) Please also consider our attractive leasing/financing offers. - Machine without automatic shuttle table! Loading is done from the long side of the machine - Very space-saving design - Extremely energy-efficient cutting system - Only approx. 4 x 4.5 meters footprint - 3kW laser source from MaxPhotonics (G5 / German version) Djdpjyacqwjfx Alyock - Laser generator with socket efficiency better than 30% - Suitable for aluminum - Top quality, book your inspection now! Cutting capacities: Steel sheet up to 22 mm (max.) Stainless steel sheet up to 12 mm (max.) Aluminum sheet up to 10 mm (max.) Brass sheet up to 8 mm (max.) - Travel range: 1500 x 3000 mm (large format) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection for the cutting head - Large laser safety windows for observing the cutting process - Extensive cutting parameter file - Incl. nesting module - Very easy to operate - High-performance laser chiller - Machine control in German - German service and spare parts supply - High-performance laser chiller - Exhaust filtration system optionally available (5.5 kW with frequency converter for quiet operation) Leasing or financing is available through our financing partner Sale is exclusively to commercial customers. Delivery/advice/sale only in Germany/Austria/Switzerland Approximate machine dimensions: Length: 4.0 m Height: 2.3 m Width: 4.5 m Total weight: approx. 4,500 kg Need a different laser power, table shape, or size? No problem. I am happy to provide a tailored offer. For example, 2kW machine from 29,990 euros. Unsure which laser power fits your application? We will of course conduct cutting tests according to your requirements. A lot is possible here.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, jenis laser: laser serat, produsen sumber laser: MAX Photonics, daya laser: 6.000 W, panjang gelombang laser: 1.080 nm, ketebalan pelat baja (maks.): 30 mm, ketebalan maksimum lembaran baja tahan karat: 15 mm, tebal plat aluminium (maks.): 12 mm, jarak pergerakan sumbu X: 3.050 mm, jarak lintasan sumbu Y: 1.550 mm, jarak gerak sumbu Z: 120 mm, tegangan masuk: 400 V, jenis pendinginan: air, berat keseluruhan: 5.000 kg, lebar bukaan pintu: 3.000 mm, tinggi bukaan pintu: 600 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, kabin, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, mesin pemotong laser baru dengan laser serat 6kW Waktu pengiriman sekitar 6-8 minggu Komitmen kami adalah menawarkan mesin laser yang sangat presisi, stabil dalam jangka panjang, dan tetap terjangkau. Mesin kami ideal untuk bengkel dan perusahaan perbaikan. Perpustakaan parameter pemotongan yang dirancang dengan sempurna juga termasuk dalam cakupan pengiriman, serta layanan kelas satu. - Mesin tanpa meja penukar otomatis! Pemuatan dilakukan di sisi panjang mesin. - Sangat hemat ruang - Sistem pemotongan yang sangat hemat energi - Hanya membutuhkan sekitar 4 x 4,5 meter ruang untuk pemasangan - Sumber laser 6kW dari MaxPhotonics (versi G5/Eropa) - Generator laser dengan efisiensi daya melalui soket lebih dari 30% - Cocok untuk aluminium - Kualitas terbaik, atur kunjungan sekarang! Pemotongan pelat baja hingga 30mm (maksimal) Pemotongan pelat baja tahan karat hingga 15mm (maksimal) Dcedsxw T Nkjpfx Alysk Pemotongan pelat aluminium hingga 12mm (maksimal) Pemotongan pelat kuningan hingga 8mm (maksimal) - Jangkauan pergerakan 1500 x 3000mm (untuk format besar) - Kontrol mesin dalam bahasa Jerman - Tirai pengaman optik untuk perlindungan operator maksimal - Tindakan perlindungan benturan yang komprehensif pada kepala pemotong - Jendela pelindung laser besar untuk mengamati proses pemotongan - File parameter pemotongan yang komprehensif - Termasuk modul kotak - Sangat mudah digunakan. - Pendingin laser berperforma tinggi - Kontrol mesin dalam bahasa Jerman - Layanan dan pasokan suku cadang Jerman - Pendingin laser berperforma tinggi - Penyedot debu filter tersedia sebagai opsi (5,5kW dengan inverter frekuensi untuk pengoperasian yang sangat senyap) Penyewaan atau pembelian dengan opsi cicilan dimungkinkan melalui mitra pendanaan kami. Penjualan hanya dilakukan kepada pelaku bisnis. Pengiriman / konsultasi / penjualan hanya di Jerman / Austria / Swiss. Dimensi mesin sekitar: Panjang: 4,0 m Tinggi: 2,3 m Lebar: 4,5 m Berat total: sekitar 4500 kg Apakah Anda membutuhkan daya laser, bentuk meja, atau ukuran meja yang berbeda? Bukan masalah. Saya akan dengan senang hati membuat penawaran yang sesuai. Misalnya, mesin 2kW mulai dari 29.990 Euro. Apakah Anda tidak yakin daya laser mana yang cocok untuk aplikasi Anda? Tentu saja, saya akan melakukan uji pemotongan sesuai dengan kebutuhan Anda. Ada banyak kemungkinan di sini.

Kondisi: bekas, jarak tempuh: 215.000 km, pendaftaran pertama: 12/2016, Tahun pembuatan: 2016,