Beli Maka Mesin Pahat bekas (78.678)

Kondisi: bekas, Tahun pembuatan: 1999, Dowel hole drilling device: pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment travel: 135 mm Dodpfjv S Diujx Aatewb Motor power: 1.5 kW Speed: 2800 rpm Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Kondisi: bekas, Three-phase motor, electric motor, milling motor Maka - Power: 1.3 kW - Speed: 2800 rpm - Shaft: Ø 18 x 40 mm Dedpfx Asdwhuqsatjwb - Design: with dovetail guide - Dimensions: 330/135/H195 mm - Weight: 15.7 kg

Kondisi: bekas, MAKA feed unit - used - Dwjdpfx Aju R S R Ujatjb infinitely variable feed speed ----- Technical data ----- Rollers: 3 units

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 82.340 h, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 420 mm, kecepatan spindel (maks.): 18.000 rpm, berat keseluruhan: 24.000 kg, produsen pengendali: SIEMENS, model controller: Sinumerik 840D, jumlah sumbu: 5, Mesin milling portal 5-sumbu tipe "MAKA Moving Beam dengan 840D" ini diproduksi pada tahun 2013. Mesin ini dilengkapi dengan kontrol Siemens Sinumerik 840D dan memiliki daya terpasang sebesar 55 kW. Berkat fitur-fiturnya yang canggih, mesin portal ini sangat ideal untuk pengerjaan presisi. Jika Anda mencari kinerja milling berkualitas tinggi, pertimbangkan MAKA portal milling machine dengan 840D yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. - Tersedia 2 unit - Kontrol: Siemens Sinumerik 840D - Jumlah sumbu: 5 sumbu (sumbu linear X, Y, dan Z serta sumbu putar/miring A dan C) - Tekanan operasi pneumatik: 6 bar - Tegangan kontrol: 24 V - Daya terpasang: 55 kW - Arus nominal: 145 A - Persyaratan pondasi: Lantai beton bertulang, kualitas EN 206, daya dukung 2500 kg/m² - Pencahayaan area kerja: Diperlukan pencahayaan bengkel 250–500 Lux - Suhu lingkungan saat operasi: 10–35 °C - Tegangan operasi: 400 V / 50 Hz AC - Ulir untuk sambungan udara tekan: ½" - Pipa suplai udara tekan: Lebar ruang kosong min. 1" - Kualitas udara tekan: Didehidrasi dan dibersihkan - Konsumsi udara tekan: sekitar 800 NI/jam (udara bebas/ tidak terkompresi) Dwjdpfx Aezd Dfveatjb - Perlindungan kebisingan: Mesin ditempatkan sepenuhnya di dalam kabin kedap suara, area dalam dilengkapi pencahayaan. Reduksi kebisingan hingga 20 dB(A) pada frekuensi menengah hingga tinggi saat kabin tertutup. - Tindakan keselamatan: Kabin tertutup total dan kedap suara, buffer pengaman di tepi depan meja, strip pengaman kontak di sisi penutup pintu geser otomatis, perlindungan limit switch di semua pintu geser dan ayun, dinding pemisah bergerak di antara meja.

Tahun pembuatan: 1990, Kondisi: baik (bekas), I'm selling a door manufacturing machine MAKA Year of manufacture: 1990 Combined oscillating slot drilling and drilling machine. Dedpfjgiwl Dsx Aatewb Available for immediate sale.

Kondisi: baik (bekas), Tahun pembuatan: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed in a gantry construction. The machining unit is arranged horizontally, and the table is arranged vertically. Machine type: MAKA DC7 Year of manufacture: 2017 Number of tables: 1 rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X/Y/Z-axis: 60 m/min A/B-axis: 10,000°/min Acceleration: X/Y/Z-axis: 3 m/sec² Working cube (work area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (working cube) is based on a total tool length of 160 mm and a tool diameter of 160 mm. Table version: 1 piece steel frame rotary table, size: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with central wall. While one side is being machined, the second side can be loaded or unloaded. 8 zero-point clamping systems, 4 per table side, for quick fixture change. Djdpfxszgtyhe Aatewb Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick couplers at the table. 2 vacuum pumps, 1 per table, frequency regulated, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including rack. Universal unit for 5-axis milling with 90° head and tool changing milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 HSD milling spindle Asynchronous motor, water-cooled, for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air transfer for angle heads. 1 compressed air nozzle on the milling unit, controllable via M-function. Tool changer: 1 rack tool magazine with 12 slots, mounted on the side. 6 slots: for tool diameter up to 60 mm 5 slots for angle heads and probing units 1 slot for saw blade up to diameter 350 mm. Control: 1 machine control Siemens SINUMERIK 840D SL User memory: CNC 3 MB Operator panel with 15" display with graphic-capable color LCD, membrane keyboard, and mouse Drives: Rack and pinion drives on X and Y axes, ball screw drive on Z axis, A/C-axes with hollow shaft drive. Work safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed film roll-up door Accessories: Chip deflection plates inside the safety enclosure. Extraction device in the working area, connectable to the extraction unit. Receiver for 3D probe Tool breakage monitoring system Both machines are set up and operational and can be inspected. An extraction system from manufacturer Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7; this extraction unit is also for sale. We would be happy to provide you with an offer!

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, CNC-gesteuertes Bearbeitungszentrum für die 5-Achs- bearbeitung Djdoy S Hahjpfx Aatowb

Kondisi: sangat baik (bekas), Very good condition. Dsdeyxnxlopfx Aatjwb

Kondisi: siap digunakan (bekas), 1.5 kW motor, 2 clamping units. Bore depth: 13 cm. Bore width: 20 cm. Bore height: 15 cm. Dwodpfx Aet D Evpsatjb

Kondisi: sangat baik (bekas), Mesin Perata MAKA 530mm 4 pisau tradisional lebar 530 mm panjang meja 2900 mm lis penahan suara pemandu sudut dapat diatur listrik 380V, 4KW Dsdpfxoyybv He Aatswb rem, mesin kokoh, kondisi sangat baik, sudah diuji

Kondisi: baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 21017403, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 5.900 mm, jarak gerak sumbu Z: 250 mm, berat benda kerja (maks.): 8.000 kg, jumlah slot dalam magazin alat: 32, produsen pengendali: BWO 900C, berat keseluruhan: 8.000 kg, tahun perombakan terakhir: 2024, daya motor spindle: 12.500 W, diameter pemasangan: 90 mm, jumlah spindel: 1, kecepatan rotasi (maks.): 17.000 rpm, kecepatan rotasi (min.): 1.000 rpm, diameter alat: 160 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, The machine is fully operational and currently in use; it will be available no earlier than 01.11.2024. The vacuum pump, central lubrication system, tool magazine, and spindle have all been serviced and overhauled. The machine is connected to the power network, allowing for inspection and testing on site. Additionally, the machine comes equipped with software featuring a post-processor for stair production and a laser projector. Training can also be provided if required. Dwedpfxouyl Npe Aateb

Kondisi: bekas, Tahun pembuatan: 1992, dengan poros pisau Centrofix Dodpfx Aoxuv Rrsatewb Mesin telah dibersihkan, diperiksa secara menyeluruh Meja sudah diukur – disetel sangat presisi, toleransi maksimal 0,05 mm, Uji rabat dilakukan Bekas, kondisi baik, jam kerja rendah Merek Maka Tipe AH 430 Tahun produksi 1992 No. seri mesin 9201531 Tersertifikasi GS untuk debu kayu Motor 3,0 kW Panel kontrol di atas Lebar penyerutan sekitar 430 mm Panjang meja masuk sekitar 1500 mm Panjang meja keluar sekitar 1200 mm Pelindung ayun Tepi meja bergigi / rendah bising Jumlah pisau 4 buah Poros pisau Centro Fix Penyesuaian tinggi meja dengan roda tangan Rem otomatis Koneksi ekstraksi D 140 mm Kebutuhan ruang sekitar 2700 mm x 1200 mm x 1400 mm Berat sekitar 800 kg Lokasi stok: 97447 Gerolzhofen, free loading, tanpa kemasan Penyerahan sesuai kondisi saat ini seperti terlihat, tanpa jaminan dan garansi.

Kondisi: baik (bekas), Tahun pembuatan: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact construction with control cabinet integrated into the machine base. CNC control BWO 900C, 1 MB memory, integrated PC. Technical data: Working ranges / working envelope: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm, with fixture height of 120 mm A-axis: 540° B-axis: 200° (+/- 100°) Dwjdpfx Aaeir Aq Tetsb Rapid traverse speed: X/Y-axis: 45 m/min. Z-axis: 15 m/min. A/B-axis: 10,000°/min. 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed from 2,000 to 24,000 rpm, rated power from 12,000 rpm onwards. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. 1 travelling drum-type tool magazine for 10 tools up to 60 mm diameter and - depending on tool diameter - up to 130 mm length from zero reference. Aluminium worktable 1,000 x 1,000 mm with matrix drilling pattern 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioning unit. Workplace safety: Sliding door for front loading, safety enclosure for the rear of the machine, with side access door, enclosure open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (residual-current device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.

Kondisi: bekas, Tahun pembuatan: 1992, 1 Dwjdpfx Asxuv N Isateb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 73.695 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 22021508, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 20.000 rpm, model controller: BWO RC, Tidak ada harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Perjalanan sumbu X: 2.000 mm Perjalanan sumbu Y: 1.000 mm Perjalanan sumbu Z: 600 mm Kecepatan poros utama: 20.000 rpm Kecepatan rapid X/Y: 60 m/menit Kecepatan rapid Z: 45 m/menit Holder alat: HSK-63F Dimensi meja penjepit: 2.000 x 1.000 mm Dsdpoyq Nx Aefx Aatowb DETAIL MESIN Unit kontrol: BWO RC Jam kerja: 73.695 jam PERLENGKAPAN Poros utama dapat diputar Sistem pendingin (MMS) Unit pendingin eksternal (pabrikan: Maka) Ball screw baru sumbu Z, dipasang oleh layanan Maka tahun 2024

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2014, jam operasional: 23.000 h, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 21066714, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 20.000 rpm, model controller: Siemens Sinumerik 840D sl, RINCIAN TEKNIS Perpindahan Sumbu X: 2.000 mm Perpindahan Sumbu Y: 1.000 mm Dwodpfx Asyq Ra Usatjb Perpindahan Sumbu Z: 600 mm Kecepatan spindle: 20.000 rpm Kecepatan rapid X/Y: 60 m/menit Kecepatan rapid Z: 45 m/menit Tipe dudukan alat: HSK-63F Dimensi meja penjepit: 2.000 x 1.000 mm RINCIAN MESIN Model kontrol: Siemens Sinumerik 840D sl Jam operasi: 23.000 jam PERLENGKAPAN Spindle putar Unit pendingin eksternal (pabrikan: Pfannenberg) Catatan: Terdapat kerusakan pada kontrol. Unit kontrol tidak merespons input. Perbaikan oleh layanan Siemens diperlukan!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 53.216 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 22024211, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 20.000 rpm, RINCIAN TEKNIS Perjalanan sumbu X: 2.000 mm Perjalanan sumbu Y: 1.000 mm Perjalanan sumbu Z: 600 mm Kecepatan spindle: 20.000 rpm Kecepatan rapid X/Y: 60 m/menit Kecepatan rapid Z: 45 m/menit Dwodpfx Aoyq Nx Njatjb Tipe koneksi alat: HSK-63F Dimensi meja penjepit: 2.000 x 1.000 mm RINCIAN MESIN Model kontrol: BWO CNC Jam operasi: 53.216 jam PERLENGKAPAN 5 clamp kompak (model: Kopal Duo) Pelindung mesin tambahan (buatan sendiri) Spindle dapat diputar Unit pendingin eksternal (produsen: Pfannenberg, kapasitas pendingin: 1,7 kW)

Kondisi: bekas, used, top specification including setting gauge Make: Maka Model: STV-71 Column-type machine with mortising tools, see pictures Workpiece stop: 2 pieces Stop rail right / left: 2150 mm Dwsdpfx Aovwf I Njatsb Workpiece ejection: 2x Foot switch Two-hand safety control Pneumatic workpiece clamping, lateral: 1 piece Pneumatic workpiece clamping, from above: 2 pieces Extraction connection, diameter 120 mm Space requirements approx. 1200 mm x 800 mm x 1500 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Handover in current condition as inspected, no overhaul, no warranty or guarantee

Kondisi: bekas, Tahun pembuatan: 1986, Combination machine with olive drilling unit Used, excellent condition, little used Manufacturer: Maka Model: STV-71-B Year of manufacture: 1986 Machine no.: 864653 Pneumatic lateral workpiece clamping unit: 1 piece Pneumatic top workpiece clamping unit: 2 pieces Required space approx. 1350 mm x 1200 mm x 1200 mm Weight approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition Sold without warranty or guarantee Dwjdpovwfz Nefx Aateb

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, EN_Gebrauchtmaschine_MAKA_FPM_470R_2024-06-14 Dwodpfjvmpx Rsx Aateb

Kondisi: bekas, Tahun pembuatan: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 Door processing center for the machining of interior doors (hardware routing, vision panels, peephole milling, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working areas: for door width: 250 – 1,280 mm for door height: max. 2,500 mm for door leaf thickness: max. 80 mm Dwedpfxev S Dn Ds Aatjb Rapid traverse speeds: X / Y axis: 45 m/min. Z axis: 10 m/min. 1 universal milling unit SK40 with integrated A-tilting axis 190° (+/- 95°), along the X-axis for lock / hinge processing on both sides along the longitudinal edge of the doors directly with the unit. Milling spindle water-cooled, rated power 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, tool holder SK40 for automatic tool changer. 1 chain tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, arranged at the unit’s home position. Maximum tool length 200 mm from spindle clamp. Milling spindle and 2 magazine positions prepared for the reception of angle or feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for processing with edge bander to ensure consistent mortising depth on both sides. 1 set infeed rollers for manual loading, automatically raiseable and lowerable. 1 longitudinal stop with pneumatic insertion stroke, mounted traveling with the unit, for positioning according to door length and thickness. 4 pneumatic stops, laterally swing-in, for doors with veneer/overlay up to max. 15 mm, also selectable height adjustment for varying stop heights for finished doors (single/double rebate doors). 2 vacuum clamping lines, each line with 5 vacuum pods, 130 / 200 x 70 mm, with sensing valve and blow-off device. 3 pods per line lowerable according to door height. 1 vacuum pump approx. 128 m³/h suction capacity, with 250 liter intermediate tank, for fast vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioning unit. Occupational safety: bumpers on both sides of the moving gantry, side safety fence. Various tools and tool holders may be taken over upon agreement. The machine can be inspected in Hermaringen.

Kondisi: baik (bekas), Tahun pembuatan: 2005, Used Machine MAKA PE 70 5-Axis CNC Machining Center for Wood and Plastic Processing. Gantry-style machine with rack and pinion drive. Year of manufacture: 2005 Technical Data: Dwodpfx Aaevr A A Tjteb CNC control BWO 920 for 5-axis machining. 10.4" LCD display 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) A-axis 540° (rotary axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y-axis 45 m/min. Z-axis 24 m/min. A-/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power: 7.5 kW (S1), 10 kW (S6), infinitely variable speed up to 22,000 rpm, HSK-F63 milling spindle, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine with 20 slots for tools up to D = 90 mm; with sorted placement up to max. 160 mm (three slots required). Machine table: - 10 support tubes on linear guides with pneumatic quick-release system for rapid positioning. - 2 control circuits for stops “raise/lower” - 2 control circuits for sliding rail “raise/lower” - 2 control circuits for pneumatic “clamp/release” - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 integrated chip conveyor in the base frame for extraction of chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine equipped with vacuum system. - 2 vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with reservoir. - Vacuum supports with various suction pads. Miscellaneous: - Automatic central lubrication. - Switch cabinet with air conditioning unit. Occupational safety: - Moving safety enclosure with safety bumpers on operator side. Repairs / maintenance before delivery: - Maintenance newly performed. - Lamella curtain on portal new - Sliding window new - Y-axis energy chain new - Z-axis energy chain new - Various cables and air hoses renewed.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Used Machine MAKA PM 270 R 5-Axis CNC Machining Centre for processing wood, plastic, and aluminium. Machine in gantry design, equipped with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) Working areas in 3-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse rate: X/Y-axis 45 m/min; Z-axis 24 m/min; A/B-axis 10 m/min Milling unit: - 1 universal unit for 5-axis milling with a 50° inclined head, maximum power 12.5 kW, infinitely variable speed up to 17,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 1 chain tool magazine with 32 positions for tools up to D = 90 mm. With sorted placement, max. up to 160 mm (occupies three positions). Machine table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 control circuits for stop "raise/lower" - 2 control circuits for sliding rail "raise/lower" - 2 control circuits for pneumatic "clamping/release" - 2 vacuum control circuits with push button for clamping, automatic reset via CNC programming - 1 chip conveyor integrated in the base frame for removal of chips and small offcuts up to approx. max. 100 x 100 x 100 mm Tools: Tools are not included in the scope of delivery! The system can also be supplied with various tool holders upon agreement. We are happy to prepare a separate offer for this. Vacuum supply: - 1 pc. vacuum pump, approx. 140 m³ suction capacity, including tank with 250 litres capacity for rapid vacuum build-up - 10 vacuum supports with various suction plates - Various clamping fixtures for posts and steam-bent parts - Stops raising/lowering for component positioning Miscellaneous: Dwodovmywqspfx Aatob - Automatic central lubrication - Control cabinet with air conditioning unit - Projection laser Occupational safety: - Moving safety cabin with safety bumpers on the operator side.

Kondisi: bekas, Tahun pembuatan: 1999, Used Machine MAKA KPF 334 RT 5-Axis CNC Machining Center Year of manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for processing deep-drawn components. Compact design with control cabinet integrated into the machine base. Equipped with automatic central lubrication and control cabinet with air-conditioning unit. Design / Version: Gantry-type machine with 2 aluminum tables Axis Data: Axis: Size / Travel / Speed X-axis: 2,750 mm / 40 m/min Y-/V-axis: 2,400 mm / 40 m/min Z-axis: 700 mm / 15 m/min Rotary axis: 540° / 10,000°/min Swivel axis: 200° / 10,000°/min Machine Connection: Voltage: 400 V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35°C Compressed air pressure: 6 bar Work areas / Workpiece envelope: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Y-axis: 1,000 mm Z-axis: 400 mm Specifications based on a fixture height of 170 mm / tool length of 60 mm. 1 Equipment 1.1 Table Version 2 aluminum surface tables with threaded inserts for clamping, each 1,000 x 1,000 mm. Tables can be coupled for machining large components. Both tables include additional threaded inserts and locating bushes (or dowel pins) for acceptance of customer-supplied milling fixtures, as specified. 1.2 Vacuum System Machine equipped with vacuum system. 1 vacuum pump 1.3 Clamping System 1 vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Quick-release couplings mounted on the machine table. 1.4 Milling Unit: 1 DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (continuously variable speed), air-cooled. A-axis 540° (rotary axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis Drives Ball screw drives on X / Y / Z-axes; A / B axes with hollow shaft drives. 1.6 Safety Features 1 automatic sliding door per table. Dwodev S Ut Djpfx Aateb Includes safety enclosure. 1.7 Control System 1 machine control BWO 900 with 1 BWO 900C operating unit, mounted on a mobile operator console. 1.8 Mains Voltage Machine is equipped for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Frequency: 50 Hz Use of RCDs in the machine power supply is not permitted. 1.9 Country Specification Technical machine documentation in German. Consisting of: - Operator manual for the machine - Operator manual for the control system - Electrical and pneumatic schematics - Control language in German.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, CNC masih dalam kondisi baik karena jarang digunakan. Dulu digunakan untuk produksi pintu, tetapi dapat digunakan untuk berbagai keperluan. Dilengkapi dengan meja ganda, yang dapat digunakan dari sisi kiri dan kanan. Djdjig T Epjpfx Aatewb 4 sumbu x 5000 mm y 1350 mm z 450 mm a 190° Spindel utama SK 40, 8 kW, didinginkan dengan air. Hingga 17.000 RPM. Majalah rantai dengan 24 posisi.