Beli Pers Tablet bekas (20.536)

Kondisi: bekas, Technical details: Bsdpfx Asu N Ddwom Tewn Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: - Pressure: 100 t Bsdpfeu Nfizjx Am Tjwn - Stroke: 20 mm fixed - Strokes per minute: 55 spm - Throat depth: 355 mm - Ram bore: Ø 36 mm - Table surface: 900x640 mm - Ram adjustment: 150 mm - Ram clamping surface: 500x415 mm - Height above floor: 800 mm - Maximum distance between table and ram: 390 mm - Table through-hole: Ø 330 mm - Total power requirement: 11 kW - Machine weight approx.: 7.5 t - Machine dimensions approx. LxWxH: 1.46x1.58x2.57 m - Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without machine control cabinet (optional installation possible). Complete electric individual drive for 3x 380 Volt, 50 Hz Belt and ram guards Friction clutch and brake unit PRESSMATIC

Kondisi: bekas, Tahun pembuatan: 1981, Technical Details: Pressing force: 30 t Clear width between uprights (WxD): 600/450 mm Installation height, table/ram top: 650 mm Ram stroke: approx. 600 mm / high-speed strokes Table size (LxW): 500 x 700 x Ø 60 mm Clamping surface of ram: 650 x 800 mm Hydraulic pressure: 170 bar Required air pressure: 4 - 6 bar Total connected load: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Four-column press, hydraulic Deburring press Possible application: may be used as a deburring press Additional technical features: - Table opening: 200 x 250 mm - Ram opening: Ø 160 mm - Gap in uprights: width 600 mm, depth 450 mm Bwedpeu Nfmajfx Am Tsn - Operation via control panel Equipment: - Safety guard - Base plates

Kondisi: bekas, en_1 Bjdpfxovt Nvpj Am Tjwn

Kondisi: bekas, Detail teknis: Tekanan: 160 t Langkah ram: 32...140 mm Jumlah langkah: 50 langkah/menit Jarak jangkauan: 400 mm Ketinggian pemasangan: 400 mm Penyesuaian slider ram: 100 mm Bodeu N Dfhepfx Am Town Ukuran meja: 1000x750 atau pelat penjepit mm Luas ram: 850x630 mm Lubang pin: 400x360 mm Total kebutuhan daya: 15,5 kW Berat mesin kira-kira: sekitar 10,5 t Dimensi P-L-T: Lemari listrik 1,06x0,6x2,0 m Dimensi P x L x T: P:2,9 x L:1,25 x T:3,3 m - Mode single dan/atau stroke kontinu tersedia - 2 pelat penjepit (1200x760x90 mm dan 1200x760x70 mm, lubang pin Ø=300 mm) - Pengoperasian dengan kaki dan tangan tersedia - Pemeriksaan terakhir dilakukan tahun 2006 - 80A; udara tekan 6kp/cm²; kapasitas oli sekitar 30 liter termasuk.

Kondisi: bekas, Technical Details: Press force: 20 t Ram stroke: 6 – 60 mm Throat depth: 176 mm Ram adjustment: 55 mm Strokes per minute: 155 spm Distance table/ram: 270 mm Clear opening width: 470 mm Table size: 300 x 450 mm Through hole in table: 90 mm Ram clamping area: 130 x 248 mm Tilting angle: 28° Ram bore: 25 x 65 mm Table height above floor: 775 mm Required air pressure: 5.5 – 6 bar Bsdpfou Nfliex Am Tswn Total power requirement: 3.5 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 1.3 x 1.1 x 1.95 m High-performance press Central lubrication with light barrier (monitored) Linuflex Stroke counter Additionally, a steel plate 315 x 400 x 50 mm with center hole Ø 63 mm

Kondisi: bekas, Tahun pembuatan: 1985, Technical details: Pressure: 100 t Strokes: 35-100 strokes/min Bwsdju Nfh Djpfx Am Ten Throat depth: 360 mm Ram adjustment: 20-130 mm Ram surface: 750x550 mm Clamping plate on table: 1000x640 mm Stroke adjustment: 90 mm Passage between uprights lengthwise/crosswise: 610x500 / 440x550 mm Installation height, table/ram bottom: 300 mm Total power requirement: 17.5 kW Machine weight approx.: approx. 7.0 t Machine dimensions (LxWxH): approx. 1.9x1.4x2.7 m - The ram plate features 5 longitudinal T-slots - Center hole = 50 mm This press is currently for sale without a control system. Optional completion can be provided upon customer request. Subject to prior sale.

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Bwedpfxju N A Uuj Am Ten Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) - As is

Kondisi: bekas, Tahun pembuatan: 1980, fi Bodpfxeu N A U Is Am Tewn

Kondisi: bekas, Detail Teknis: Tekanan: 90 t Jangkauan: 320 mm Jumlah langkah: 90 langkah/menit Tinggi pemasangan: Meja/ram atas: sekitar 380 mm Penyetelan ram: maks. 65 mm Permukaan ram: 600x55 mm Pelat clamping pada meja: 800x640x80 mm Jalur lewat: 260x160 mm Pengaturan langkah: 60 mm tetap Kebutuhan daya total: 5,5 kW Berat mesin sekitar: 4500 kg Bsdpfou Nfg Hox Am Town Kebutuhan ruang sekitar: P:1,8xL:0,82xT:2,42 m - Langkah tunggal/berkesinambungan - Pemeriksaan rutin dilakukan, direkondisi tahun 2010 - Saat ini tanpa panel kontrol, tanpa sistem kendali, tanpa tangki udara tekan

Kondisi: bekas, Tahun pembuatan: 1964, en-GB_Technical_details_01 Bsdpfx Asu Nfibom Tswn

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressure: 100 t Stroke: 20 mm fixed Strokes per minute: 55 spm Table surface: 900x640 mm Throat depth: 355 mm Bedpou Nfi Usfx Am Town Ram adjustment: 150 mm Ram bore diameter: Ø 36 mm Ram clamping surface: 500x415 mm Height above floor level: 800 mm Max. distance between table and ram: 390 mm Passage hole in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without a machine control system/control cabinet. (Optional installation possible) Complete electric single drive for 3x 380 Volt, 50 Hz Belt and ram guard PRESSMATIC friction clutch and brake unit

Kondisi: bekas, en-001 Bwedpfx Aeu N A D Aom Ton

Tahun pembuatan: 1997, Kondisi: bekas, Rincian teknis: Tekanan: 250 t Langkah: sekitar 400 mm Lebar celah: 640 mm Tinggi meja dari lantai: 900 mm Kecepatan ram: dapat diatur Celah pada penyangga samping: 470 mm Area penjepit meja (P x L): 570x550 mm Area penjepit ram: 570x550 mm Kebutuhan daya total: 56 kW Berat mesin sekitar: 9,0 t Dimensi mesin (P x L x T): 2,5x1,8x3,8 m Dimensi transportasi (P x L x T): 2,6x1,8x3,1 m - Kontrol manual dan otomatis melalui PLC Allen Bradley Bjdpfeu Nfn Rex Am Tswn - Pengoperasian satu tangan dan dua tangan - Panduan ram empat-kolom, bebas kelonggaran - Pengaturan dan mode otomatis dikendalikan PLC (saat ini tidak berfungsi) - Tirai cahaya tipe Sick dan tirai pengaman terpasang - Tidak ada penandaan CE termasuk.

Kondisi: bekas, Technical Details: Pressure: 200 t Stroke: approx. 200 mm Table size: L:1200 x H:450 mm Jaw width: 1000 x 200 mm Total power requirement: 18 kW Machine weight approx.: 15 t Machine dimensions (LxWxH): 4.5 x 1.5 x 2.2 m Carrier Straightening Press, Eccentric-type Bending Machine - Jaw holder (LxW): 1200 x 220 mm - Jaw adjustment: 200 mm travel Bwodpfxju Nfrps Am Ten - Jaw opening width: 300 mm - Manual operation - Electrical cabinet (LxWxH: 0.85 x 0.8 x 2.7 m) Accessories: - Various stops, inserts, stop angles, and scribers as per inventory.

Kondisi: bekas, Tahun pembuatan: 1969, Technische_Details_DE_001 Bodpfexu Dwmox Am Tjwn

Kondisi: bekas, Tahun pembuatan: 2022, Technical details: Pressure: 30 t Stroke: 142.5 mm Table surface: 500 x 180 mm Bwsdpfx Amju N A Eao Ton Clear opening in table: 500 x 160 mm Frame width: 1000 mm Installation height, table/ram at top: 120 - 1020 mm Machine weight approx.: 176 kg Machine dimensions (LxWxH): approx. 0.8 x 0.8 x 1.8 m (D) Simple hydraulic double-column press – special construction, welded from 20 mm steel plate. Table support with V-block: 260 x 205 mm Lower bolster installation height max./min.: 1031 / 151 mm Table height above floor max./min.: 1290 / 300 mm Lower bolster vertically adjustable manually, 10 steps, step spacing 100 mm Ram carriage with stroke cylinder Ø 63 mm and punch mount pin bore Ø 25 x 25 mm *

Kondisi: bekas, Detail teknis: Bwjdpfx Aou Nfhqsm Tjn Tekanan: 160 t Overhang: 760 mm Langkah ram: 32...140 mm Jarak meja/ram: 400 mm Penyesuaian ram: 100 mm Jumlah langkah: 50 langkah/menit Meja: 760x1000x95 mm Lubang tembus di meja: 400x350 mm Luas permukaan pemasangan ram: 630x850 mm Pelat pemasangan: 760x1010x92 mm Kebutuhan daya total: 15 kW Berat mesin kurang lebih: 6,2 t Dimensi mesin (PxLxT): 2,9x1,2x3,4 m Dimensi panel kontrol (PxLxT): 0,8x0,45x2,1 m Pengoperasian dengan kendali dua tangan Mesin dapat didemonstrasikan sesuai permintaan. i.D. *

Kondisi: bekas, Technical details: Mounting diameter: 310 mm Weight: 216 kg Dimensions (L x W x H): 0.5 x 0.2 x 0.9 m Bwodpfou Nurxjx Am Ten Connecting rod for mechanical press PEE 250 Trapezoidal thread Ø 146 x 14 mm

Kondisi: bekas, Tahun pembuatan: 2023, used condition year of manufacture 2023 stock number 7280 delivery time immediate, subject to prior sale country of origin Turkey price €15,700 Bwjdpfjynm Nmjx Am Tjn in stock 1 pressing force 100 t cylinder fixed or movable fixed bending length 1020 mm stroke 300 mm clearance between uprights 1020 mm distance between table and tool holder 680 mm rapid traverse 9 mm/s working speed 5 mm/s return speed 10 mm/s max. bending capacity (mild steel) 6 mm table 500x1020 mm drop-through hole in table 100 mm hole spacing 190 mm length 2110 mm width 1000 mm height 2275 mm weight 2082 kg demonstrator / as-new condition net price (new price €19,550) 2 guides large ram plate and large support table with T-slots upper and lower tools for edge bending manometer rapid approach with automatic changeover to working speed infinitely adjustable piston stop in any position two-hand operation AND FOOT PEDAL table height adjustable CE compliant equipment operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detailed photos & function videos of the current condition • ONSITE LIVE CHECK Live demonstration at our facility • DIGITAL DEMO Individual live demonstration via video call • RISK-FREE PURCHASE 14-day right of return Details:

Kondisi: baik (bekas), Tahun pembuatan: 1991, Hydraulic horizontal straightening and bending press Maximum pressing force: 160 t Manufacturer: MAE, Model: HY RI 160 RH, Year of manufacture: 1991. Bedpfx Aecffzajm Tewn For further technical data, see data sheets.

Kondisi: bekas, Tahun pembuatan: 1991, de-hu-it-lt-001 Bsdpfx Ajv Az T Ssm Tewn

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Pressing force: 320 t Sheet thickness: 0 mm Strokes per minute: 80 spm Total pressing force: 320 t Stroke: 30 - 80 mm Clamping area (lower table): 630 x 740 mm Clamping area (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in as-new condition with new CE marking. MAIN RAM Total force (nominal): 320 t Minimum stroke: 30 mm Stroke: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table - width: 630 mm Lower table - depth: 740 mm Upper table - width: 630 mm Upper table - depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Bwjdpfx Aovwgl Nom Ten Total power consumption: 60 kW

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 22,06 kW (29,99 hp), gaya punching: 250 t, Excenter press EBU suitable for insertion work, UV tested Bedpfx Aov T Dapsm Town Stroke adjustment from 10 to 140 mm Ram adjustment 80 mm Stroke rate 50 /min.

Kondisi: baik (bekas), jarak tempuh: 361.917 km, daya: 103 kW (140,04 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, konfigurasi gandar: 4x2, pendaftaran pertama: 01/2015, kelas emisi: Euro 5, warna: lain, kabin pengemudi: kabin harian, suspensi: baja, ukuran ban: 235/65R16, jumlah tempat duduk: 9, Tahun pembuatan: 2015, Perlengkapan: ABS, kontrol traksi, kunci sentral, pendingin udara,