Beli Spindel Elektro Berkecepat Tinggi bekas (21.431)

Kondisi: baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Drilling capacity (solid material): 32 mm Thread cutting capacity (solid material): M 32 mm Motor power: 1.5 / 3 kW Tool holder: MT 4 Quill stroke: 170 mm Stroke approx.: 400 mm Nsdpfx Aozfwh Hentocw Spindle speeds: - Range 1, infinitely variable: 38 – 192 rpm - Range 2, infinitely variable: 119 – 596 rpm - Range 3, infinitely variable: 400 – 2000 rpm

Kondisi: diremajakan ulang (bekas), Perbaikan papan kecepatan untuk berbagai model. Hubungi kami jika tingkat transmisi tidak lagi berfungsi sebagaimana mestinya. Nsdpfx Asy Rfzuontscw

Kondisi: sangat baik (bekas), Model Gral 300 Double-walled bowl with bowl trolley Bowl capacity: 300 liters Usable capacity: 1/2 to 2/3 Mixer motor power: 16-24 kW – 2 speeds Mixer arm speed: I speed: 120 rpm | II speed: 185 rpm Chopper motor power: 7-9 kW – 2 speeds Chopper arm speed: I speed: 1297 rpm | II speed: 2524 rpm Hydraulic motor: 1.5 kW Nsdpegn Ehaofx Antocw Double-walled bowl suitable for cooling or heating Dimensions: Height: 2,900 mm Depth: 1,600 mm (without lid) Width: 1,200 mm All product contact surfaces: AISI 316

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 4.000 mm, panjang umpan sumbu Y: 1.050 mm, panjang umpan sumbu Z: 200 mm, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Dimensions and Travel Paths Tool Holder: SK 40 Table Size (mm): 4000 x 800 Number of T-slots: 6 T-slot Pitch (mm): 140 Distance, Spindle Underside (min, mm): 140 Distance, Table Top (max, mm): 740 Drilling Radius (min, mm): 540 Drilling Radius (max, mm): 1590 Travel Range U-Axis (mm): 2600 Travel Range Y-Axis (mm): 1050 Quill Stroke (Z-Axis, mm): 200 Column Stroke (W-Axis, mm): 400 Machining Data Drilling Capacity, Solid (St 60, mm): 40 Drilling Capacity, Solid (GG 22, mm): 50 Tapping Capacity (St 60): M36 Tapping Capacity (GG 22): M42 Main Spindle Drive AC Motor, frequency-controlled (kW): 5.5 at 100% duty cycle Speed Range (rpm): 15 - 2800 Torque (Nm): max. 250 Constant Torque (rpm): 15 – 200 Feed Drives X-Axis - AC Servo Motor (kW): 0.25 Y-Axis - AC Servo Motor (kW): 0.25 Z-Axis - AC Servo Motor (kW): 4.50 W-Axis - AC Servo Motor (kW): 2.50 U-Axis - AC Servo Motor (kW): 2.50 Rapid Traverse Speed (X/Y/Z, m/min): 7.5 / 7.5 / 5 Rapid Traverse Speed (U/W, m/min): 7.5 / 3 Infinitely Variable Feed Rate (mm/min): 5 - 2000 Feed Force (N): 12000 Accuracy Positioning Accuracy X, Y-Axis (over 1200 mm, mm): ±0.075 Repeatability X, Y-Axis (mm): ±0.03 Positioning Accuracy Z-Axis (mm): ±0.05 Repeatability Z-Axis (mm): ±0.03 Positioning Accuracy W-Axis (mm): ±0.05 Repeatability W-Axis (mm): ±0.03 Electrical Data Operating Voltage / Frequency (V / Hz): 400 / 50 Control Voltage (V): 24 Total Connected Load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, easily readable from all angles Position Display: Cartesian or polar, absolute or incremental, mm or inch, and in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool recommendations by machining type, cutting data suggestions based on material Tool Management: Max. 500 tools Subprogram capability: Yes Machining Cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; user-programmable cycle for special tools; dwell time possible in every cycle Chip Breaking / Chip Removal: Possible during drilling cycles Drilling Patterns: Line, circle, matrix Ncjdpsy Ttrtefx Antjw Basic Software: Conversational programming, 38 zero point settings, rotation and mirroring, teach-in for X, Y, Z; program restart with selectable entry functions Zero Point Determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely clamped rectangular parts - Freely clamped round parts - Alignment of cast and flame-cut parts - Angular position detection on round parts by probing reference edges or surfaces Data Interfaces Paintwork with Signs of Use Standard paint, two-component textured finish Machine Upper Section: Light grey RAL 7035 Machine Lower Section: Light blue, blue RAL 5012 Documentation Operating and Programming Instructions Electrical Circuit Diagram Spare Parts Drawings Inspection Report for Mechanics, Electrical, and Safety Devices

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 6.431 h, Jungheinrich ESE 20 High-Speed Electric Pallet Stacker Ref: RA2396 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90079958 Battery replaced: 2016 Ncodpfx Anjwb I Hbotew Inspection (TÜV): valid until 2023 Operating hours: 6431 h Fork length: 1150 mm Outside fork width: 540 mm Maximum load capacity: 2000 kg Lift height: 125 mm Travel speed: 8.5–12.5 km/h Included: • Combi instrument and information/service display • Fast charger 380V Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, just get in touch with us. Contact us by phone or email. We are happy to support you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 4.267 h, Jungheinrich ESE 20 High-Speed Electric Pallet Stacker RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery replacement: 2016 Safety inspection (TÜV): valid until 2023 Operating hours: 4,267 h Fork length: 1,930 mm Outer fork width: 540 mm Maximum lifting capacity: 2,000 kg Lifting height: 125 mm Travel speed: 8.5–12.5 km/h Included: Nedpfx Aowcqg Hentjcw - Combination instrument and information/service display - 380V rapid charger Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For personalized and professional advice, feel free to contact us. Get in touch by phone or email. We are happy to support you with the planning and realization of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2007, Drilling capacity in steel (diameter): 40 mm Arm reach: 1,050 mm Spindle speed: 15 – 2,800 rpm Feed range: 0.075 – 0.45 mm/min Dimensions (L x W x H): 2,450 x 1,300 x 2,300 mm Weight: 1,500 kg Ncedpfx Anjy Nd T Hotsw Equipment: • Machine in top condition • Serviced and overhauled by factory customer service in 2026 Machine Features: • Worktable 1,800 x 600 mm with 4 T-slots • Arm travel: 1,050 mm • Drill spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of machine base • 2 x 18 mm T-slots on the left side of machine base • Thread cutting device • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 410 mm Distance spindle nose – min./max. (to table): 70 / 680 mm Distance spindle nose – min./max. (to floor): 970 / 1,580 mm Drilling radius: 540 – 1,590 mm Worktable height: 900 mm Machining Values Drilling capacity (solid material): - St 60: Ø 40 mm - GG 22: Ø 50 mm Thread cutting: - St 60: M36 - GG 22: M42 Main Spindle Drive AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2,800 rpm Max. torque: 250 Nm, constant from 15 – 2,000 rpm Feed Drives X-axis: AC servo motor 0.25 kW Y-axis: AC servo motor 0.25 kW Z-axis: AC servo motor 4.5 kW W-axis: AC servo motor 2.5 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feed: 5 – 2,000 mm/min Accuracy Positioning accuracy X, Y axis over 1,200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1,800 x 600 mm table): 2,800 kg CNC Control Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: Backlit TFT flat screen, easily readable from all angles, 215 x 160 mm Position displays: Cartesian or polar, values absolute or incremental, units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data proposals Tool management: max. 500 tools Subprogram technology: yes Standard software options: dialog programming, 38 zero point offsets, rotate and mirror, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point determination: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Kapasitas pengeboran St 60/GG 22: 40/50 mm Pengeboran berulir St 60/GG 22: M 36/M 45 Luas meja penjepitan: 600 x 1800 mm Penyesuaian tinggi lengan: 450 mm Radius pengeboran kecil/besar: 305/1305 mm Pemasangan spindel: SK 40 Ncsdpfx Anjy I Ua Iotow Langkah pinol: 200 mm Kecepatan spindel tanpa langkah: 15 - 2800 rpm Feed tanpa langkah: 5 - 2000 mm/menit Penggerak spindel, dikontrol frekuensi: 5,5 kW Koneksi listrik: 400 V, 14 kVA Berat: 3400 kg Kebutuhan tempat: 3800 x 2000 x 2500 mm

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), radialdrill-2018-cnc Ncedpfxsy Tn Ntj Antjw

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, berat keseluruhan: 10.000 kg, tegangan masuk: 380 V, frekuensi input: 50 Hz, panjang pemakanan sumbu X: 120 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 170 mm, GB-A1500 Fully Automatic High-Speed Bending Center Bending length (mm): 1500 Bending height (mm): 4 sides 160 4 sides 170 / 2 sides 350 4 sides 350 Minimum forming dimensions: (Folding all 4 sides) (mm) 4 sides 160: 350×250 4 sides 170 / 2 sides 350: 350×250 4 sides 350: 350×250 Maximum bending dimensions (mm): 1500×1500 X-axis stroke: 120 mm Y-axis stroke: 4 sides 160: 200 mm 4 sides 170 / 2 sides 350: 305 mm 4 sides 350: 305 mm Z-axis stroke: 4 sides 160: 170 mm 4 sides 170 / 2 sides 350: 357 mm 4 sides 350: 357 mm Ncjdsv Ikvgopfx Antsw Clamping knife height: 4 sides 160: 177 mm 4 sides 170 / 2 sides 350: 177 mm 4 sides 350: 357 mm Number of axes: Suction cup: 11 Pressure arm: 14 Machine power (kW): Suction cup: 34.7 Pressure arm: 36.35 Max. bending thickness (aluminum plate) (mm): 3 Max. bending thickness (iron plate) (mm): 2 Max. bending thickness (stainless steel) (mm): 1.5 Max. bending speed (s/knife): 0.2 Overall machine dimensions (mm): Length (front) 4 sides 160: 1890 2–4 sides 350 suction cups: 1890 2–4 sides 350 pressure arm: 1890 Width (side) 4 sides 160: 3300 2–4 sides 350 suction cups: 3536 2–4 sides 350 pressure arm: 4127 Height 4 sides 160: 2666 2–4 sides 350 suction cups: 2946 2–4 sides 350 pressure arm: 2946 Weight (approx. kg): 4 sides 160: 9000 2–4 sides 350 suction cups: 10000 2–4 sides 350 pressure arm: 10000 Features: 1) Machine frame: Robust, heavy-duty welded construction, stress-relieved by annealing for minimized frame deflection. 2) Y-axis full closed-loop control. 3) Proportional hydraulic compensation system prevents deformation during bending. 4) German HEIDENHAIN linear encoder. 5) Taiwan HIWIN ball screw and linear guides, high-performance Japanese Yaskawa AC servo motors and drives. 6) Advanced CYBELEC/DELEM professional CNC controller with extensive functions. 7) Electro-hydraulic servo synchronization module and German BOSCH pressure module. 8) Repeat accuracy: ±0.01 mm 9) Parallelism accuracy: ±0.01 mm

Kondisi: bekas, column-type hydraulic press EXNER Type EEX 20 S . 1615 Year of manufacture 1980 Pressing force 20 tons Throat depth 180 mm Table size 380 x 350 mm Table opening Ø 50 mm Ram area 310 x 250 mm Clamping pin Ø 35 mm Ram stroke 100 mm Max. installation height 250 mm Table height above floor 900 mm Downward speed approx. 480 mm/s Upward speed approx. 480 mm/s Ncedpsyz Dtdjfx Antjw Working speed 20 mm/s Hydraulic tank capacity 110 liters Hydraulic operating pressure at 20 tons: 200 bar Motor power 4 kW Power supply 400 Volt, 50 Hz - Stroke initiation via two-hand control or light curtain - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU with single- and double-stroke and safety function - Rapid approach stroke and working stroke - Stroke limitation, pressure- or stroke-dependent - Mechanically adjustable fixed stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating instructions and electrical circuit diagram included - Stroke counter Required space (L x W x H) 1250 x 750 x 2000 mm Weight 1.4 tons Good condition

Kondisi: siap digunakan (bekas), Otto Müller SR 30 Fast Radial Drill Drill spindle mount (Morse): 40 mm Longitudinal travel of the drilling head (X-axis): 750 mm Vertical travel of the arm (Y-axis): 450 mm Spindle diameter: 70 mm Maximum drilling depth: 150 mm Speed: 2400 rpm Dimensions: 175 x 120 x 235 cm (L x W x H) Power supply: 380 V Without oil skimmer to the left of the machine in the photo. Transport available at additional cost. Call or email for more information. Nedjvilzgjpfx Antjcw Also check our other listings. We are always looking for industrial machinery year-round. If you have surplus machines, please email details and photos. The seller is not liable for typographical or data transmission errors. The machine’s cosmetic, technical, and wear condition is consistent with its age; used machinery is sold without warranty. The price indicated is exclusive of VAT.

Kondisi: siap digunakan (bekas), Otto Müller SR 23 Fast Radial Drill - Drill spindle taper (Morse): 30 mm - Longitudinal travel of drill head (X-axis): 750 mm - Height travel of arm (Y-axis): 350 mm - Spindle diameter: 55 mm - Max. drilling depth: 125 mm - Spindle speed: 2400 rpm Ncedjvilzmspfx Antsw - Dimensions: 175 x 130 x 215 cm (L x W x H) - Power supply: 380 V Completely new control system, ready for immediate use. Transport available at additional cost. Please also see our other listings. We are looking for industrial machinery year-round. If you have surplus machines, please email us with photos and details. The seller is not liable for typographical or data transfer errors. The machine’s appearance, technical condition, and wear are commensurate with its age; used machines are sold without warranty. The price shown is exclusive of VAT.

Kondisi: baik (bekas), Tahun pembuatan: 1985, Spindle speeds - infinitely variable 26 - 1650 rpm Operating voltage 380 V Frequency 50 Hz Rated current 15 A Connected load 6.5 kW Ncodpfx Asvylh Uentow Tool holder MK 4 Machine weight approx. 2.3 t Space requirements approx. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connected load: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column traverse speed: 40 mm/s Column stroke: 450 mm Quill stroke: 200 mm Drilling area: 430 - 1150 mm Spindle height adjustment: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Tahun pembuatan: 1970, Kondisi: baik (bekas), nomor mesin/kendaraan: 1258, Saw blade diameter: 315 mm Cutting range at 90° round: 90 mm Ncsdpfjh I Dvnsx Antow Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed rates: hydropneumatically steplessly adjustable Cut length: 5 - 1580 mm Saw drive: 380 V, 1.8/2.5 kW Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

Kondisi: bekas, Tahun pembuatan: 1987, Kami menawarkan mesin bor radial cepat Donau DR 40-Z bekas ini, tahun produksi 1987. Produsen: Donau Tipe: DR 40-Z Nomor seri: 1146-3 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami. Lokasi mesin berada di Osterode/Harz. Mesin dapat dilihat berdasarkan perjanjian. Nedpfey Dn E Nox Antjcw Ini adalah mesin bekas, oleh karena itu dijual tanpa jaminan apa pun.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Ncjdpfx Asynt Ucsntjw Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive Njdpfx Anoylnpijtecw AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: bekas, Tahun pembuatan: 1989, bohrleistung-maschinendaten Ncedpfx Aney Aa H Njtsw

Tahun pembuatan: 1985, Kondisi: hampir baru (bekas), Wanzke Hydraulic High-Speed Press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press manufactured by Wanzke. This press is in like-new condition! Technical data: Manufacturer: Wanzke Model: SP/F 12 Pressing force: 120 kN Return force: 17.8 kN Overrun time: 0.028 sec Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Mains voltage: 380V 50Hz Ncodehgiyiepfx Antsw Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety clearance: 4 mm Accessories: GM1 Decoiler

Tahun pembuatan: 1985, Kondisi: hampir baru (bekas), Wanzke hydraulic high-speed press SP/F12 double-column press. -WKG 499- Offered here is a hydraulic high-speed press from Wanzke. This press is in like-new condition! There are 2 presses mounted on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Press force: 120 kN Return force: 17.8 kN Overrun time: 0.028 sec Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety distance: 4 mm Strokes/min: Working stroke: 10 mm/sec Rapid advance: 20 mm/sec Max. stroke: 100 mm Table size: 320 x 300 x 280 mm Accessories: Ncodpfxshgiwns Antjw Double decoiler type GMD1 Digital control system "Tronic press" with full upgradeability to CNC control. A total of 2 units are available!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Ncedpfx Anjyhdvkotew Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: bekas, Tahun pembuatan: 1991, penjepit spindle: MK 4, Meja kerja 600mm x 1200mm Ncodpfjx N Iftjx Antow Perjalanan lengan 600mm Pemasangan alat MK 4 Kapasitas bor 40mm pada baja Perangkat pengetapan ulir Perangkat pendingin Dokumentasi

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MT 4) • Infinitely variable speed setting • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left side of machine base • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose to table top min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capabilities Drilling capacity (solid material) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Thread cutting St 60 M 36 Ncjdex Uwpxjpfx Antew GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1980, Meja kerja 500mm x 1200mm Ncodex N Ih Iepfx Antjw Pergerakan lengan 600mm Penjepit alat MK 4 Kapasitas pengeboran 32mm pada baja Perangkat pembuat ulir Perangkat pendingin Pelindung pada bor Direkondisi total pada 2026