Beli Technidrill Mesin Bor Lubang Dalam bekas (78.547)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 106882-11, panjang total: 4.400 mm, lebar total: 1.700 mm, tinggi total: 2.700 mm, berat keseluruhan: 7.000 kg, The drilling process used by the deep hole drilling machine is the single-lip drilling method. Drilling Unit Specifications: - Drilling depth: 200 mm - Drilling diameter min/max: 1–12 mm (based on ST 60) - Number of spindles: 2 - Spindle spacing: 200 mm - Spindle drive: 2 x 2.4 / 4.2 kW - Spindle speed, infinitely variable: 1,000 – 20,000 rpm - Feed rate, infinitely variable: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - Slide travel X-axis: 200 mm, rapid traverse: 25,000 mm/min - Slide travel Y-axis: 200 mm, rapid traverse: 25,000 mm/min Fluid System: - Coolant supply: deep hole drilling oil - Tank capacity: 500 litres - 1x automatic filter, filtration capacity: 50 l/min - 1x pre-filter - 2x ELB deep hole oil supply units - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic equipment - 1x sump pump - 3x submersible pump - 1x radial piston pump with remote adjustment: - Delivery rate: 1–38 l/min - Pump drive: 7.5 kW Spindle Unit: - Motor spindles with frequency-controlled, stepless speed adjustment - Spindle head prepared for tool holder connection - 2 x tool holders for setting sleeve as per VDI 3208 SE10x60, bolted directly to the motor spindle spindle head Drill Bush Carrier: - Drill bush carrier can be positioned via the NC axis - Cast version mounted on linear guideways - W-axis drive via AC servo motor and ball screw with indirect absolute position measuring system Workpiece Slide: - The workpiece slide is designed as a cross slide for vertical and horizontal positioning of the workpiece and for mounting clamping plates or special fixtures - Main body in cast iron, with linear roller guides - X and Y axis driven by AC servo motors and ball screws - Direct, absolute position measuring systems - Table plate with T-slot for clamping or alignment Nsdpfx Afowh Rp Eevewk Clamping Table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping for rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Centre height: 25 ± 0.02 - Spindle spacing: 200 ± 0.005 - Indexing accuracy: Rotary axis ± 15'' / Swivel axis ± 30'' Electrical Equipment: - 1x drilling process monitoring - 1x CNC control unit 840D (Solution Line) Connections: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Additional Equipment: - 2 x mounting points for floating drill bushing holders, arranged on the drill bush carrier - For drilling diameters up to max. 18 mm.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M01.16.21.51.02, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 500 mm, kecepatan spindel (maks.): 10.000 rpm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Jarak gerakan sumbu X: 1.600 mm Jarak gerakan sumbu Y: 1.200 mm Jarak gerakan sumbu Z: 500 mm Jarak gerakan sumbu W: 1.200 mm Jarak gerakan sumbu B: 360° Kecepatan spindel: 10.000 RPM Nsdpfx Afjznkpvsvowk Daya motor spindel: 30kW Penggerak umpan: Motor servo AC tanpa sikat Kecepatan umpan: 0–20.000 mm/menit Kecepatan cepat sumbu X: 20.000 mm/menit Kecepatan cepat sumbu Y dan Z: 20.000 mm/menit Mode manual: 20.000 mm/menit Mode pengaturan: 0–2.000 mm/menit Ukuran meja: 1.500 × 1.500 mm Alur-T: 5 × DIN 650-22 H12 Jarak alur-T: 150 mm RINCIAN MESIN Penyangga perkakas: Hidraulik Koneksi listrik: 400 V Frekuensi: 50 Hz Tekanan kerja udara bertekanan: 6 bar Laju aliran nominal: 7.000 RPM

Kondisi: baru, Tahun pembuatan: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard configuration according to price list 01/19/D with: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor, 1400/2800 rpm, 1.5 kW - Line laser with holder - Boring unit, continuously rotatable from the front (65°-0°-65°) - Positioning adjustment via digital counter - Pneumatic two-level positioning adjustment (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm division, with central detent and cross adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for extra wide frames 1 stop bar approx. 850 mm, reversible from left to right 2 flip stops - Drop-down mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dust extraction funnel, dust-tested, Ø 80 mm Nwodpfx Aoxdttpefvjk Double mitre stop, adjustable 0°-60° Pneumatic X-axis clamping with on/off switch on the indexing lever Pair of auxiliary workpiece supports, swiveling (left and right) Clamping column adjustable to the front Undercarriage with 4 wheels for easy movement of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Stair baluster drill bit Ø 25 mm made of chrome steel with centering point Available: at short notice

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration according to price list 01/22/D with: Nodpfexdttiex Afvowk - Precision collet chuck for ER 40 collets, diameter 3-26 mm. Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 150 mm - Precision indexing rail with 12 mm pitch featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders - Complete stop system consisting of: 1 center stop and 1 stop for oversize frames 1 stop rod approx. 850 mm long (can be mirrored from left to right) 2 flip stops - Lowerable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, tested for dust Central 45° mitre stop Pair of swiveling workpiece support arms (left and right) Drilling head mount 3-spindle drilling head, spacing 32 mm (can be rotated 90°) Chassis with 4 wheels for easy machine movement Available: Short notice - immediately -

Kondisi: bekas, Mesin bekas Perlengkapan dan data teknis: Nodpjzk Nrbefx Afvewk - Mesin bor deret dua sisi - 2 motor bor @ 1,8 kW, dengan silinder rem oli - Stroke maks. 130 mm - dengan katup pengalihan pneumatik - 21 spindle, jarak spindle 32 mm - Jarak pengeboran maks. 640 mm (dengan menggeser benda kerja maks. 2656 mm) - Lebar portal 850 mm - Konsumsi udara pada 5 bar sekitar 11 l per siklus - Sambungan ekstraksi 160 mm Ukuran: kira-kira 3100 x 1100 x 1800 mm Berat: sekitar 350 kg Ketersediaan: langsung Lokasi gudang: 63934 Röllbach

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, mesin pemotong alur otomatis, tahun 1995, kondisi sangat baik Nsdpfx Aezphg Uofvowk Interholz Raimann A 10 adalah mesin pemotong alur otomatis untuk kayu, yang digunakan untuk memotong secara presisi bagian kayu yang cacat dan mengisi kekurangannya dengan sisipan kayu (potongan kayu). Informasi historis dan teknis terperinci dapat ditemukan di basis data Wood Tec Pedia dari Höchsmann, dan dokumentasi serta diagram dapat ditemukan di toko Mar-masz. Data teknis utama: Tujuan: Memotong bagian kayu yang cacat dan menempelkan dowel perbaikan pada kayu solid. Dimensi meja kerja: Sekitar 640 x 470 mm. Diameter mata bor/pemotong alur: Standarnya antara 25–35 mm (tergantung pada perlengkapan yang dipasang). Catu daya: 380V (tiga fase). Aplikasi dalam produksi: Furnitur dan lantai: Memungkinkan perbaikan estetis pada elemen kayu yang terlihat. Daur ulang bahan baku: Meningkatkan nilai material dengan menghilangkan cacat, alih-alih membuang seluruh elemen.

Kondisi: bekas, Used Machine Pre-owned Line Boring Machine Ganner Compact 30 Features and Technical Specifications: - 2 drilling beams, each with 15 spindles - 32 mm pitch - Drilling unit position adjustment: 0 – 650 mm - Minimum distance between rows of drilled holes: 190 mm - Spindle speed: 2,800 rpm - Motor power: 2 x 0.75 kW Nsdszk Nwdspfx Afvewk - Maximum clamping height of workpieces: 70 mm - Working height: 850 mm - Compressed air connection: 6 bar Availability: By arrangement Location: Solingen

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Njdpfxet Hwucs Afvswk Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Kondisi: bekas, Tahun pembuatan: 1985, Core drilling diameter – max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofit and modernization by TBT _____ Drilling – solid drilling approx. 1 – 18 mm Drilling – counterboring approx. 25 mm Drilling depth 320 mm Center height above bed/table 150 mm Travel of drilling slide max. approx. 500 mm Nwjdpfxet Hwvae Afvok Travel of positioning slide (linear guides) 500 mm Spindle center distance 125 mm Drilling feed/rapid traverse stepless approx. 35 – 1,000/7,000 mm/min Center distance between the spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive power of the complete machine approx. 33 kW – 400 V – 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump parts (Ø approx. 25 x 150 mm, hole approx. 5 mm) which are loaded via an inclined conveyor into a dual positioning station for correct orientation check, and then automatically and in pairs via a crosswise to the machine mounted loading portal (2 x double grippers) clamped in the machining zone between drilling bush holder and powered tailstock. After machining, the second pair of grippers takes over the workpieces and transfers them to a blow-off and drill breakage detection station. After successful inspection, the workpieces drop into transport containers. - The process programming and monitoring is handled by a SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated HF spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw spindle - Separate coolant oil system approx. 1,500 liters with various pumps and a sophisticated belt filter purification system - Separate hydraulic system approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate electrical and control cabinets, CE-marked Condition: good to very good – soon ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1996, Maximum core drilling diameter: 25 mm Drilling depth: 1000 mm Swing diameter: mm Total power requirement: 25 kW Machine weight approx.: 12.5 t Space requirements approx.: m T B T CNC-controlled horizontal deep hole drilling machine Type: BWP 250 Year of manufacture: 1996, mechanically and electrically overhauled in 2006 Working area: - X axis = Drill carriage travel: approx. 2,000 mm - Z axis = Drill carriage stroke: approx. 1,200 mm - Drilling depth with 2 steadies: approx. 1,000 mm - Y axis = Drill carriage vertical travel: approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity – solid material: approx. 4 – 25 mm diameter Tool holder: HSK 50 Spindle speed: 1,260 – 15,000 rpm Nwjdst Hw Ayopfx Afvsk Feeds / rapid traverse for Z/X/Y axes continuously variable: 100 – 10,000 / 15,000 mm/min Feed drive power: 27 Nm / 1,000 daN Spindle drive power: 7 kW Total drive approx.: 30 kW – 400 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Equipment: - Ideal machine for complete machining of larger workpieces, moulds, and plates using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, keyway milling up to Ø 30, spiral drilling/enlarging up to Ø 30, countersinking, and thread tapping up to M 24 x 3. - SIEMENS 840 D 4-axis CNC control with process monitoring, etc. - High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds - Pneumatic workpiece-contact drill sleeve carrier (200 mm), dual-swivel - Fixed 12-pocket tool changer by MIKSCH, Type CTM 40 with 800 mm travel, suitable for spiral drills, end mills and tapping tools; changing from ELB deep hole drills to standard tools is manual - The table is stationary, designed for high workpiece weights and accurate drilling - Mounted on the table: FIBRO CNC rotary indexing table Type RTN 400 = 420 x 420 mm as B-Axis - Optional: Hydraulic FIBRO rotary indexing table, Ø 1,000 mm, for division 3–144 or angle degrees 2.5–120° - Large coolant system approx. 11 kW pump with scraper belt chip conveyor and various filters - 2 support steadies for supporting the deep hole drill shafts - Full machine enclosure with side and front access Condition: very good – a truly rare opportunity, can be demonstrated under power soon Delivery: ex stock here Payment: strictly net upon receipt of invoice We look forward to your order. For further information, please do not hesitate to contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, direkondisi sepenuhnya pada tahun 2005 Jumlah spindel: 2 Kapasitas pengeboran/spindel, baja: 1-6 mm Kedalaman pengeboran: maks. 350 mm Jangkauan pergerakan sumbu Z: 350 mm Jangkauan pergerakan sumbu W: 350 mm Daya penggerak/spindel - 100% ED 3,7 kW - 50% ED 5,5 kW Kecepatan spindel: 3.000 - 27.000 1/menit Ukuran dudukan spindel: Ø 10 - 60 mm Tekanan pendingin: maks. 150 bar Aliran pendingin: 48 l/menit Volume pendingin: 1.000 l Filter pita kompak Pompa tekanan tinggi Aksesori termasuk: - 29 buah selongsong bor - Dudukan selongsong bor Nodpfxoy Eykgo Afvewk - Dudukan kerucut penjepit - Kerucut penjepit - Chuck bor Aksesori opsional - € 5.500,- - 137 mata bor - Daftar lengkap, lihat PDF

Kondisi: bekas, Tahun pembuatan: 1975, Jumlah spindel: 20 Jarak bor: 32 mm Nedpfx Afoy E Hfksvjwk Daya terpasang: 1,8 kW

Kondisi: bekas, Tahun pembuatan: 1992, Number of spindles per row: 16 Number of horizontal spindles: 5 Cup hinge boring head: yes Drill spacing: 32 mm Nodjwv Nb Nspfx Afvowk Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swiveling

Kondisi: bekas, Row drilling & fitting boring machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, insertion unit, Nodpfxovtm Ayj Afvswk stop rulers

Kondisi: bekas, Mesin bor lubang memanjang SAMCO AS 16 - bekas - Nwsdpow Nv Nxefx Afvek Motor dapat digerakkan, Perangkat pengeboran dowel ----- Data teknis ----- Ukuran meja kerja: 550 x 285 mm, Lebar pengeboran: 190 mm, Kedalaman pengeboran: 120 mm, Kecepatan: 2.840 rpm, Motor: 1,5 kW, Berat: 220 kg

Kondisi: bekas, Mesin bekas Unit bor dengan 21 spindel Jarak antar bor 32 mm, maks. 640 mm, dengan menggeser benda kerja maks. 2656 mm Nedpfow I Um Hex Afvjwk dengan silinder rem oli Gerak maksimum 130 mm Motor 2,5 HP Dimensi mesin sekitar 1450 x 1100 x 1600 mm Berat sekitar 240 kg Ketersediaan: sekitar 2 minggu setelah pesanan diterima Lokasi: Hochheim

Kondisi: baik (bekas), Tahun pembuatan: 1983, Jarak spindel 32 mm Daya motor 1,8 kW Berat 240 kg Jumlah spindel 21 unit - Ukuran meja 1400 x 630 mm - Jarak pengeboran maks. 640 mm, dengan menggeser benda kerja maks. 2656 mm - Silinder rem oli Nwedpfx Ajzfqk Iofvok

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.150 mm, berat keseluruhan: 12.000 kg, diameter bor: 32 mm, Heidenhain iTNC530 CNC control system 12-position tool changer Technical data / details: Travels: X-axis (table, longitudinal): 1800 mm Z-axis (column, cross): 1700 mm W-axis (drilling unit, cross): 1150 mm Y-axis (drilling unit, vertical): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25 to +15° Deep drilling area (ELB): Nsdewcldajpfx Afvowk Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, see photos.

Kondisi: bekas, Tahun pembuatan: 2000, Jumlah spindle baris lubang: 11 Jumlah spindle horizontal: 3 Kepala bor engsel cangkir: ya, Blum Nwsdpfxoxc Hi Ue Afvok Jarak bor: 32mm Daya listrik: 2,2kW Unit bor: dapat diputar

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.250 mm, panjang pemakanan sumbu X: 1.700 mm, panjang umpan sumbu Y: 800 mm, panjang umpan sumbu Z: 600 mm, berat benda kerja (maks.): 6.000 kg, jarak pergerakan sumbu X: 1.700 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 4.200 rpm, kapasitas pengeboran: 30 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, - Kontrol HEIDENHAIN TNC 620 - Handwheel elektronik - Ukuran meja 1000 x 1000 mm Nwodpfx Afezixyrjvsk - Sistem pergantian meja manual dengan meja TITIK NOL - Rotasi meja sumbu B 360.000 posisi/putaran - Kemiringan meja sumbu A +/- 22,5° - Spindel bor dalam 11 kW / 6000 RPM - Spindel milling ISO 40 / 13 kW / 6000 RPM - Magasin alat ISO 40, 24 tempat - Penyedot asap AR FILTRAZIONI - Sertifikasi CE

Tahun pembuatan: 2013, Kondisi: bekas, produsen pengendali: Siemens, model controller: 840Dsl, 897ab6ec Nsdpjx E Ingsfx Afvjwk

Kondisi: sangat baik (bekas), Bor mesin untuk elemen bubut Triade Nwsdjyabz Ispfx Afvsk Jumlah unit bor: 3 Kedalaman pengeboran: 100 mm per sisi

Kondisi: baru, This is a new machine manufactured in Romania by the company Emsil. Customer specifications can be accommodated depending on technical feasibility and are subject to prior review by the manufacturer's engineering department. Nwodpeu Id H Aefx Afvjk About the spindles: Narwhal is equipped with a boring spindle made of hardened, tempered, and alloyed steel, mounted with preloaded angular contact precision ball bearings. The machine also features a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and is also equipped with angular preloaded precision ball bearings. It operates on bronze guide bushings. The clamping devices for both units, which serve to attach and release the ISO 50 taper tool holder, open and close automatically. Rotary Table: Table rotation is achieved via a double-pinion gear drive, a central supported shaft, and a hydrostatic slide block in the central bearing dimensioned to ensure maximum precision even under heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes are equipped with a direct measuring system. CNC Axis Control: All 9 axes of the machine are continuously monitored. The monitoring system is equipped with a 15'' TFT screen, operator panel, remote diagnostics to alert users in the event of faults, user memory, network connectivity, remote process control, integrated PLC, etc. The machine is compatible with various control systems, including Heidenhain, Fanuc, Siemens, and others. You can select the machining sizes for X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500 mm as per your requirements. Best regards,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1976, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.500 mm, panjang pemakanan sumbu X: 2.030 mm, panjang umpan sumbu Y: 1.800 mm, panjang umpan sumbu Z: 1.700 mm, panjang meja: 2.200 mm, lebar meja: 1.800 mm, beban meja: 12.000 kg, Mesin Bor Lubang Dalam Ixion (Kedalaman Bor 1500mm, X 2030mm, Y 1800mm, Z 1700mm) Mesin dasar adalah mesin bor PEGARD AF 13 (tahun pembuatan 1976, berat mesin sekitar 32 ton) Retrofit dan konversi ke TLB pada tahun 1996 (konversi dilakukan oleh ROTTLER Maschinenbau GmbH - Mudersbach) Perbaikan 2024 (bearing spindle diperbarui, penyangga bushing bor/pasokan pendingin dibongkar dan dibersihkan, hidrolik penjepit alat diperbaiki, unit pendingin dan agregat hidrolik dibersihkan dan diperiksa, dll) Lintasan kerja: - Sumbu X (memanjang) 2030mm Nedpfey Rhzwsx Afvjwk - Sumbu Y (unit bor vertikal) 1800mm - Sumbu Z 1700mm - Kedalaman bor sekali jalan 1500mm - Sumbu B (meja putar) 0-360° Unit pembor: - Spindel utama ISO40 - Kecepatan spindel 60-6000 rpm - Daya penggerak pada 100% duty cycle 7,5kW Meja Putar NC (Sumbu B): - Area meja 2200x1800mm - Sumbu putar 0-360° - Kapasitas beban maksimum 12.000kg - Akurasi posisi +/-15 detik Sistem Pendingin/Conveyor Serpihan: - Kapasitas tangki sekitar 1000l - Tekanan pendingin maksimum 80bar - Debit maksimum 46l/menit - Filter pita kertas - Conveyor scraper/conveyor serpihan Kontrol CNC: - Mitsubishi M325 dengan layar warna 14" - Pemantauan kerusakan alat terintegrasi melalui pembacaan torsi spindle utama - Visualisasi nilai proses torsi secara real-time - Program teknologi deep drilling - Handwheel elektronik portabel

Tahun pembuatan: 2006, Kondisi: bekas, CNC SELCA 4045 Rotary Table: 1200 x 1500 mm X-Axis Travel: 2200 mm Y-Axis Travel (Vertical): 1000 mm V-Axis Travel (Drilling): 1000 mm Z-Axis Travel (Milling): 360 mm W-Axis Travel (Approach): 500 mm B-Axis Rotation (Table): 360.000° Maximum Drilling Capacity: 5 - 40 mm Maximum Tapping Capacity: M30 Tool Holder for Milling: ISO 40 Axis Feed Rates X/Y/V/W: 0 - 10,000 mm/min Spindle Motor Power for Drilling & Milling: 9 kW Weight: 26,000 kg Drilling Spindle Speed: 4,200 rpm Milling Spindle Speed: 4,500 rpm Workpiece Load Capacity (Rotating): 12,000 kg Workpiece Load Capacity (Stationary): 18,000 kg Nwsdpfx Afoq Nni Sevek Maximum Workpiece Diameter (Rotating): 2,700 mm Automatic Tool Changer for Milling Tools: 20 positions Paper Filtration System