Beli Tws Automation Pencetak Stensil bekas (18.486)

Tahun pembuatan: 2020, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tinggi konstruksi: 2.200 mm, jumlah spindel: 3, persyaratan ruang panjang: 5.000 mm, lebar yang dibutuhkan: 5.500 mm, nomor mesin/kendaraan: 50844458, tingkat otomatisasi: otomatis, kapasitas produksi: 3.000 unit/jam, We are offering this used PIA Automation production line for surgical disposable masks, year of manufacture 2020. The line operated for only 2.5 years in single-shift mode and its condition can be described as “very good”. The production system is additionally equipped with a connected compressed air supply as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials for the production of approximately 300,000 surgical disposable masks. Nedjy Ddnmspfx Aa Uowg Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Main fuse: 25 A Short-circuit rating: < 10 kA Concept: The line consists of a total of three units, interconnected by conveyor belts. In the first section, the individual consumables are fed via rollers, folded, the nose wire is integrated, welded, and then cut to the correct length. The finished, cut masks are transported via an indexing belt and conveyor systems to the next units, which are set up in parallel. In these, the ear loops are fed in and welded to the mask. If you have any questions or require further information, please feel free to send us a message or give us a call.

Kondisi: belum diuji (bekas), Tahun pembuatan: 2019, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 10387A, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), Baru saja diperoleh melalui pembelian di lokasi. Mesin pengemas buah otomatis dengan robot. Menggunakan tiga lengan robot Staubli TS60. Lihat gambar untuk detailnya. Pembeli harus mengatur pengambilan. Mesin saat ini belum terhubung ke fasilitas. Nwedpfx Aoxcndgsa Ujg

Kondisi: bekas, TECHNISCHE DATEN Njdjyzi U Hopfx Aa Ujwg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, jam operasional: 240 h, jenis kontrol: Kontrol CNC, produsen pengendali: Hypertherm, model controller: Edge Connect TC, ketebalan pelat baja (maks.): 40 mm, panjang kerja: 3.000 mm, lebar kerja: 1.500 mm, akurasi pemposisian: 0,05 mm, akurasi pengulangan: 0,05 mm, berat benda kerja (maks.): 5.000 kg, masa garansi: 12 bulan, de Nwjdpoyzuw Tsfx Aa Ueg

Tahun pembuatan: 2023, jam operasional: 10 h, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, We are offering a machine specifically developed for securing loose or cracked knots. The knots are automatically detected as they pass through and are fixed in place with hot-melt adhesive. This significantly reduces waste caused by defective knots. For surfaces finished with opaque coatings, the knot becomes almost invisible. Net Automation sets new technological standards in the diagnosis and correction of wood features with the AELA XKI. Njdjpiufwopfx Aa Uewg • Significantly reduced processing times • Immediate further processing possible • Visual enhancement • Extremely easy operation DIAGNOSIS AND CORRECTION • Decayed knots • Cracked knots • Resin pockets • Encased knots, etc. ADVANTAGES • No tear-outs during planing • Detection of dirt and batten marks • Artificial intelligence (AI)-driven diagnostics • Automated fixing process The system can be inspected and tested at our location in 77866 Rheinau by prior arrangement.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, AMADA LKI MP 300 OTOMATISASI MUAT DAN BONGKAR Tahun 2007 Nodpfx Aaoyylqbe Ujwg LKI MP 300M pemuat / manipulator lembar otomatis dengan kapasitas lembar 3000mm x 1500mm.

Tahun pembuatan: 2011, Kondisi: bekas, PA182 Automatischer Traysealer aus Edelstahl, zweistufiger Rundtakttisch, bis zu 40 Packungen pro Minute, mobil, derzeitiges Format 210 mm x 165 mm Tray. Nwodpfx Aedbqtqea Uog

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, nomor mesin/kendaraan: KST-02N-DC24V, Lot besar aktuator katup elektrik – Kangsaite Automation KST-02N. Nwsdpfx Asx N A Nyja Ujg • Jumlah tersedia: 50+ unit • Tipe: Aktuator katup quarter-turn elektrik (on/off) • Tegangan: 24V DC • Torsi terukur: 20 Nm • Perlindungan: IP67 • Standar pemasangan: ISO5211 F03 / F04 / F05 • Rotasi: 90° • Aplikasi: Katup bola / katup kupu-kupu • Kondisi: Stok lama baru (tidak pernah digunakan, belum pernah dipasang) Cocok untuk otomasi industri, makanan & minuman, sistem air, HVAC, dan kontrol proses. Dijual hanya aktuator (tanpa katup). Lokasi: Rehovot, Israel EXW Harga grosir tersedia. Diskon untuk pembelian jumlah besar (10+, 25+, 50+ unit).

Kondisi: baik (bekas), de-G Webb Automation MiniFill Schneckenförder-Dosierer, der auf eine Wägeplattform dosiert. Perfekt zum Abpacken von Pulvern, Granulaten, Kaffee usw. in Beutel. Nwsdpfxom Sg Hcj Aa Ueg

Kondisi: bekas, Tahun pembuatan: 1996, Garvens Automation Inline Checkweigher 1600-1150-950 RA1975 The inline checkweigher, including conveyor belt and SEW gear motor with frequency inverter, is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Model: SL 100 ID1 Year of manufacture: 1996 Machine type: Inline checkweigher Overall dimensions: approx. 1600 x 1150 x 550 mm (W x D x H) Electrical connection Njdsk Abn Sspfx Aa Uswg Rated voltage: 380V and 220V, equipped with plug and distribution box (Plug and Play) Rated frequency: 50Hz / 60Hz (+/-2%) Weighing technology: Weighing scale dimensions: approx. 1600 x 1150 x 550 mm (W x D x H) Measurement type: Electromagnetic force compensation Weighing range: 0 – 60000 g Conveyor 1600-1150-950 and SEW gear motor with frequency inverter Conveyor length (FL): 1600 mm Total width: 1150 mm Belt width (GuB): 950 mm Motor type: SEW geared motor with MoviMot Motor power: 0.55/0.55 kW Speed: 0.02–1.2 m/s For individual, professional advice, simply contact us. You can reach us by phone or by email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Dijual Automation dari Zeroclamp Zerobot 100P. Beroperasi sejak 2015. (Sangat cocok untuk Haas UMC 750, tetapi juga dapat digunakan pada tipe mesin lain) Otomatisasi ini memungkinkan penanganan ragum atau penanganan material mentah. Fleksibilitas penuh dalam desain. Penyimpanan benda kerja yang besar untuk banyak material mentah (dapat dikonfigurasi bebas). Hemat ruang. Perlengkapan: * Beragam plat penahan untuk penanganan material mentah * Gripper untuk material mentah * Rak kedua untuk meningkatkan kapasitas komponen * dan lainnya. Sistem ini memungkinkan penanganan material mentah maupun alat penjepit. Tersedia banyak kemungkinan aplikasi, kami siap memberikan konsultasi. Nwedpfxeyk D Dyj Aa Usg

Kondisi: baik (bekas), Tahun pembuatan: 2003, Plasma cutting device, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, geared motor Nsdpfewkqmiox Aa Ujwg -Manufacturer: CR Electronic S.R.L / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation Type PAT3B-S4-SRM50 -Individual components: see photos -Quantity: 2x drive units available -Offer/Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/unit

Kondisi: baik (bekas), CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, control unit Nwsdpfx Aajwt R Ire Ueg -Type: Exchange unit ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

Kondisi: baik (bekas), Tahun pembuatan: 2008, CNC control, control rack, electronic module - Manufacturer: Power Automation / Innovance Technology, CNC control system - Model: PA8000 LW - Dimensions: 330/250/H130 mm - Weight: 5.7 kg Nodjwubtnepfx Aa Uewg

Kondisi: baik (bekas), WSM stationary screwdriving unit, screwdriving station Assembly of components for car radios and navigation systems, as well as testing of the same. The assembly station is surrounded by a safety enclosure. The service doors are equipped with safety interlock switches. In automatic mode, the doors are locked and can only be opened after an automatic stop or in manual mode by pressing the 'Doors' button on the control panel. When a door is open, automatic operation cannot be started. Process sequence: The station is loaded with the pre-assembled module via the transfer belt. The following are the work steps of the automatic station during one WT cycle. Under normal operation, all three stations work in parallel. Njdpfxoibichj Aa Uewg - Positioning of the WT with the pre-assembled module in station 2.1 - Lowering the carrier with scanner and vision sensor - Scanning of the three codes (front panel, front PCB, SD PCB), comparison with database - Checking the correct engagement of the FFC in the connector - Raising the carrier and lowering the WT onto the belt - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the belt - Positioning the WT with the pre-assembled module in station 2.3 - Lowering the light protection cover and contacting, moving in the carrier with the test sensors from below - Type-specific testing of the illumination of SD + CD slots and push buttons - Functional test of CD eject button - Lowering the WT onto the belt > process continues If errors occur during testing, these are displayed and can be corrected if possible. For this, switch to manual mode and open the doors. After the repair, restart the automatic mode; the WT will be retested in the station. If repair is not possible (e.g., screwdriving error), the WT will be marked as NIO (not OK) in the control system and will not be further processed. Manual NIO marking and removal are also possible. Financing through our partner bank is also possible. komplett-konzept.leasingo.de More assembly stations, both new and used, can be found in our shop! International shipping costs available upon request!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 68086, de Nwodoxpq T Rjpfx Aa Ueg

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Suitable for testing steel drums for tightness, drum diameter: 574-598 mm, max. drum weight: 30 kg, drum temperature: 10-50°C, with documentation. Nwsdpfx Aom H Uqkea Usg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, With documentation, an on-site inspection is possible. Nedef Ddrlopfx Aa Ujwg

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), A+F Contiflex bottle packer with integrated A+F Multiformer tray erector available. Maximum output capacity: 220 bottles/min, connected load: 14 kW, length: 7,789 mm, width: 1,977 mm, height: 3,284 mm, operating hours: approx. 600 h. Complete documentation included. Inspection is possible. Nwedpfx Aajm Nckfo Ueg

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Max. weighing range: 1000g, equipped with a Mettler Toledo TF10-L-P load cell, display of weight values, weight classification, and automatic sorting of weighed goods. Njdpfxotqtw Us Aa Uswg

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A complete SIC-Marking laser processing and marking system is available. Stations: 3. Table type: Vacuum clamping table. Processing area per station X/Y: 1000mm/1600mm. Laser wavelengths: 10600nm / 1064nm. Processes: vaporization / cleaning / structuring / surface processing. Overall system dimensions X/Y/Z: approx. 25000mm / 3000mm / 3000mm. Operating hours: approx. 2000h. Station 1: Laser type: Synrad CO2 laser. Number of lasers: 6. Laser power: 100W. Pulse frequency range: 0kHz–100kHz. Power density: 250kW/cm². Processed materials: Polyamide / PVB / PET. Processes: melting / vaporization. Station 2: Laser type: IPG fiber laser. Number of lasers: 6. Laser power: 250W. Pulse frequency range: 20kHz–500kHz. Power density: 250MW/cm². Processed materials: copper / aluminum / tin / lead / iron. Processes: structuring / melting / vaporization. Station 3: Laser type: IPG fiber laser. Number of lasers: 3. Laser power: 300W. Pulse frequency range: 2kHz–200kHz. Power density: 3MW/cm². Processed materials: copper / aluminum / tin / lead / iron. Process: surface processing. The coating of the F-theta lenses at Station 2 is slightly deformed. Documentation available. On-site inspection possible. Nwjdpfx Aeyfv I Hea Ujg

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), de-1 Nwedpfoydd Acox Aa Uog

Kondisi: baik (bekas), PA Eclipse SL6 Hochleistungs-Schalensiegler aus Fertiggerichtefabrik. Nwedepg Er Nepfx Aa Uog

Kondisi: baru, Tahun pembuatan: 2025, Wir produzieren und installieren komplette Anlagen für Wasser und Säfte, egal ob still oder kohlensäurehaltig. Die komplette Linie besteht aus einer Flaschenblasmaschine, einem automatischen PET-Zuführsystem, einer kompakten Wasch-, Füll- und Verschließmaschine. Jede Verschließmaschine verfügt über einen automatischen Verschlusszuführer und eine Sterilisationsstation für die Verschlüsse. Wir liefern Hochleistungsfilter sowie eine automatisierte CIP-Hygienisierungsstation. Optional kann eine Karbonisierstation inklusive Kühler und Wärmetauschereinheit ergänzt werden. Nwsdpfxou Nad To Aa Usg Nach dem Befüllen der Flaschen installieren wir eine Röntgenkontrollmaschine zur Inspektion, einen Ofen zur Erhöhung der Flüssigkeitstemperatur, eine Wasserblasmaschine zur Reinigung der Flaschen, eine Etikettiermaschine, eine Datums- und Chargenkennzeichnungsmaschine, eine Flaschenkartoniermaschine, eine Palettierstation sowie eine Stretchfolienwickelmaschine zur Fixierung der Paletten.

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, Vollautomatische Roboterzellen für verschiedene Branchen, bestehend aus den Hauptkomponenten: Produktvorbereitungs- bzw. Ausrichtungsband, Fanuc-Roboter (je nach Anforderungsprofil unterschiedlicher Typ), Roboterständer, Roboter-Greifer, Rollen- bzw. Gurtförderer für das Endprodukt. Die Maschinen werden über eine HMI-Schnittstelle bedient, es sind keine Roboter-Programmierkenntnisse zur Bedienung erforderlich. Wir entwickeln Anwendungen für das Stapeln, Transportieren, Palettieren, Sortieren, Pick-and-Place, Gruppieren und Einlegen in Kartonagen für Säcke, Eimer, Flaschen, Boxen, Dosen usw. Nwsdouvg Ahepfx Aa Ueg Jede Roboterzelle kann mit industriellen Bildverarbeitungssystemen, Etikettier- und Markiersystemen sowie Software zur Produktionsüberwachung erweitert werden.