Beli Weyrauch Mesin Bor Radial Cepat bekas (79.988)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW Knsdpou Dg D Ajfx Ac Hea W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: bekas, Tahun pembuatan: 1991, Meja kerja 600mm x 1200mm Perjalanan lengan 600mm Kodpfx Aoxpfglsc Hena Pegangan alat MK 3 Kapasitas pengeboran 28mm pada baja Alat pembuat ulir Sistem pendingin Dokumentasi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Kedpfx Aexn A Spec Hjna Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: baru, Drilling capacity in steel (diameter) 40.0 mm Thread cutting M30 Workpiece height – max. 380 – 785 mm Arm outreach 985 mm Spindle taper 4 MT Drill head swivels right/left -80 / +80 degrees Table surface 1210 x 520 mm Speed range 50 – 2000 rpm Column diameter 220 mm Table surface 1210 x 510 mm Quill stroke 200 mm Feed range – spindle 0.08 – 0.50 mm/rev Total power requirement 2.2 kW Machine weight approx. 2800 kg Space requirements approx. 2450 x 1200 x 2720 mm Features - Wide range of clamping and machining options due to design - Electrically driven height adjustment of the drill head without shifting the drilling position, ideal for deep hole drilling - Drill head swivels 180°, arm can be moved back and forth and swiveled horizontally - Thread cutting unit and 6 automatic drilling feeds included as standard - Large table surface (1195 x 500 mm) enables simultaneous clamping of multiple workpieces - Digital speed and drilling depth display included - Rapid drill head setup on the workpiece, clamping is hydraulic - Heavily ribbed column ensures high rigidity of the arm - Robust construction guarantees vibration-free operation - Infinitely variable electronic speed regulation as standard Scope of delivery - Electromagnetic spindle feed Knedpjxaadyefx Ac Hoa - Digital speed indicator - Digital drilling depth indicator - Electrically operated drill head adjustment - Initial filling with Shell Tellus 46 - Quick-release drill chuck 1 – 13 mm / B16 - Drill chuck arbor MT 4 / B16 - Reducing sleeves MT 4 / 3, 4 / 2, 3 / 1 - Thread cutting device - LED machine lamp - Coolant system - Height-adjustable safety guard

Kondisi: bekas, bohrleistung-in-stahl-durchmesser-32-mm Knodpfjxfb Hasx Ac Hsa

Kondisi: baik (bekas), Tahun pembuatan: 1985, Spindle speeds - infinitely variable 26 - 1650 rpm Operating voltage 380 V Frequency 50 Hz Rated current 15 A Connected load 6.5 kW Tool holder MK 4 Machine weight approx. 2.3 t Space requirements approx. 1500 x 1200 x 2500 mm Operating voltage: 380 V Kedpfx Asvylh Uoc Hena Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connected load: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column traverse speed: 40 mm/s Column stroke: 450 mm Quill stroke: 200 mm Drilling area: 430 - 1150 mm Spindle height adjustment: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), radialdrill-2018-cnc Kjdey Tn Ntopfx Ac Hsna

Kondisi: bekas, Tahun pembuatan: 2008, Mesin Bor Radial Cepat Alzrapid 32 Dengan dudukan alat MK4 Umpan pinol, Knedszhbl Uopfx Ac Hea Perangkat ulir, Manual pengoperasian,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.800 kg, Spindel: MK4 Luas permukaan penjepitan: 1200 x 500 Alur penjepitan: Jumlah 3, lebar 18, jarak 125 Kodpfxjzuarme Ac Hsna Kapasitas pengeboran maksimum: untuk baja St 60: 32 mm dengan 0,2 mm/putaran untuk besi tuang GG 20: 45 mm dengan 0,2 mm/putaran

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 4.000 mm, panjang umpan sumbu Y: 1.050 mm, panjang umpan sumbu Z: 200 mm, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Dimensions and Travel Paths Tool Holder: SK 40 Table Size (mm): 4000 x 800 Number of T-slots: 6 T-slot Pitch (mm): 140 Distance, Spindle Underside (min, mm): 140 Distance, Table Top (max, mm): 740 Drilling Radius (min, mm): 540 Drilling Radius (max, mm): 1590 Travel Range U-Axis (mm): 2600 Travel Range Y-Axis (mm): 1050 Quill Stroke (Z-Axis, mm): 200 Column Stroke (W-Axis, mm): 400 Machining Data Drilling Capacity, Solid (St 60, mm): 40 Drilling Capacity, Solid (GG 22, mm): 50 Tapping Capacity (St 60): M36 Tapping Capacity (GG 22): M42 Main Spindle Drive AC Motor, frequency-controlled (kW): 5.5 at 100% duty cycle Speed Range (rpm): 15 - 2800 Torque (Nm): max. 250 Constant Torque (rpm): 15 – 200 Feed Drives X-Axis - AC Servo Motor (kW): 0.25 Y-Axis - AC Servo Motor (kW): 0.25 Z-Axis - AC Servo Motor (kW): 4.50 W-Axis - AC Servo Motor (kW): 2.50 U-Axis - AC Servo Motor (kW): 2.50 Rapid Traverse Speed (X/Y/Z, m/min): 7.5 / 7.5 / 5 Rapid Traverse Speed (U/W, m/min): 7.5 / 3 Infinitely Variable Feed Rate (mm/min): 5 - 2000 Feed Force (N): 12000 Accuracy Positioning Accuracy X, Y-Axis (over 1200 mm, mm): ±0.075 Repeatability X, Y-Axis (mm): ±0.03 Positioning Accuracy Z-Axis (mm): ±0.05 Repeatability Z-Axis (mm): ±0.03 Positioning Accuracy W-Axis (mm): ±0.05 Repeatability W-Axis (mm): ±0.03 Electrical Data Operating Voltage / Frequency (V / Hz): 400 / 50 Control Voltage (V): 24 Total Connected Load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, easily readable from all angles Position Display: Cartesian or polar, absolute or incremental, mm or inch, and in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool recommendations by machining type, cutting data suggestions based on material Tool Management: Max. 500 tools Subprogram capability: Yes Machining Cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; user-programmable cycle for special tools; dwell time possible in every cycle Chip Breaking / Chip Removal: Possible during drilling cycles Drilling Patterns: Line, circle, matrix Basic Software: Conversational programming, 38 zero point settings, rotation and mirroring, teach-in for X, Y, Z; program restart with selectable entry functions Zero Point Determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely clamped rectangular parts - Freely clamped round parts - Alignment of cast and flame-cut parts - Angular position detection on round parts by probing reference edges or surfaces Data Interfaces Paintwork with Signs of Use Standard paint, two-component textured finish Machine Upper Section: Light grey RAL 7035 Machine Lower Section: Light blue, blue RAL 5012 Kjdpfoy Ttrtex Ac Hsna Documentation Operating and Programming Instructions Electrical Circuit Diagram Spare Parts Drawings Inspection Report for Mechanics, Electrical, and Safety Devices

Kondisi: siap digunakan (bekas), Donau DR 23 - Mesin bor radial berkecepatan tinggi -Kapasitas pengeboran / baja sekitar 28mm -Jangkauan lengan sekitar 700mm -Cone Morse MK 3 Knjdpfx Aeztdz Aoc Hea -Rentang kecepatan 70-1550 RPM - dengan roda gigi -Rentang umpan 0,075-0,3mm -Kedalaman pengeboran 130mm -Perangkat untuk membuat ulir -Penjepit hidraulik -Dokumentasi Dimensi: P x L x T 2 x 1,7 x 1,9 meter / Berat 1900 kg Kesalahan dan perubahan dapat terjadi.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, COLETT - Gamesa – Mesin bor radial “PORTABEL, dioperasikan dengan derek” -Lengan sekitar 1200 mm -Kepala universal -Kecepatan putaran spindel 95 – 750 RPM -Umpan otomatis -Cone Morse MK 4 -Lengan dapat diatur ketinggiannya sekitar 1400 mm -Panel kontrol / Retrofit Dimensi: PxLxT 2x1x2,1 meter / Berat 1600 kg Kjdpfx Aezpfy Sjc Hena Kesalahan dan perubahan dapat terjadi.

Kondisi: bekas, Tahun pembuatan: 1990, Penyangga MK 3 Nomor seri 4131 Kodpfozkbqvjx Ac Hena Jangkauan 1000 mm Dokumentasi tersedia Penjepit hidraulis kW Berat mesin sekitar 2,6 ton 3 meter kubik muatan di dalam truk

Kondisi: bekas, Tahun pembuatan: 1988, Dalmastroj BRB-3 mesin bor radial cepat konvensional Kondisi: Bekas Tahun pembuatan: 1988 Data teknis: Kapasitas pengeboran pada baja: Ø 30 mm Jarak lengan: 430 - 1000 mm Diameter pilar: 200 mm Tinggi benda kerja: 500 mm Sambungan spindel bor: MK 4 Rentang kecepatan: 100 hingga 1120 rpm (8 langkah) Kepala mesin dapat diputar: 360° Daya motor: 1,4 / 1,8 kW Tegangan: 400 V Berat mesin: sekitar 2100 kg termasuk aksesoris Perlengkapan: Ksdpfx Aszhualoc Hena - Kaki pendingin dengan pompa - Perangkat pemotong ulir - Batas kedalaman bor - Chuck bor

Kondisi: baik (bekas), 1 mesin bor radial cepat bekas Merek: Donau Knsdpfxezl Ufcs Ac Hsa Tipe: DR 28 Z Tahun pembuatan: 1985 Data teknis: - Kapasitas pengeboran pada baja penuh ST 60: 28 mm - Kapasitas pengeboran pada GG 25: 40 mm - Pembuatan ulir pada ST 60: M 30 - Pembuatan ulir pada GG 25: M 40 - Dudukan spindel bor: MK 3 - Diameter spindel: 50 mm - Langkah spindel: 150 mm - 18 kecepatan spindel bor: 45 - 2240 putaran/menit - 4 kecepatan umpan pengeboran: 0,1 - 0,45 mm - Jarak minimum/maksimum antara spindel dan meja: 300 / 700 mm - Radius pengeboran minimum/maksimum: 305 / 1005 mm - Tinggi meja: 820 mm - Ukuran meja: 1200 x 600 mm - Penggerak: 400 V / 6 kW - Luas yang dibutuhkan: sekitar P 1300 x T 2800 x L 2300 mm - Berat: sekitar 1500 kg - Dilengkapi dengan: - Perlengkapan pembuatan ulir - Penjepit kolom dan lengan hidrolik - Perlengkapan pendingin - Alur T vertikal di sisi kiri mesin

Kondisi: hampir baru (bekas), Donau Donauflex 135 Mesin Bor Radial Kecepatan Tinggi Produsen: Donau Tipe: Donauflex 135 Tahun pembuatan: 2020 Kondisi: Sangat baik, bekas namun seperti baru Tersedia segera dari stok. Knjdpjzgvmqsfx Ac Hoa

Kondisi: bekas, Tahun pembuatan: 1980, Penjepit MK 3 Feeder: 4 tingkat Putaran maks.: 2580 Gerak x: 2500 mm Jangkauan: 1000 mm Pelat alur: 1000/2800 mm Kodpszfqmpefx Ac Hsna Berat: 3,7 t 2 kemasan Dibutuhkan 7,5 meter muat untuk transportasi

Tahun pembuatan: 1973, Kondisi: bekas, Drilling capacity in steel (diameter): 32 mm Throat depth: 410 - 1000 mm Workpiece height - max.: 765 mm Coolant system: yes Drill spindle diameter: 38 mm Quill diameter: 70 mm Spindle stroke: 225 mm Drill spindle taper: MK 4 Spindle speeds - stepless: 70 - 2000 rpm Feed range - spindle: 0.04 - 0.32 mm/rev Column diameter: 225 mm Drill radius max./min.: max. 1130 mm Table clamping surface: 630 x 1320 mm Height adjustment: 500 mm Base plate: 1500 x 1000 mm T-slots: 4 pieces T-slot spacing: 18 mm Total power requirement: 2.2 kW Knedpsgmu A Sefx Ac Hea Machine weight approx.: 1.8 t Space requirement approx.: – Support travel: 590 mm Without rotary table, without tools

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, jarak gerak quill: 170 mm, kedalaman tenggorokan: 900 mm, daya: 3 kW (4,08 hp), Schnellradialbohrmaschine_Fab_HKS_34MG_1994 Kjdpfx Acozbr Ibs Hjna

Kondisi: baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Drilling capacity (solid material): 32 mm Thread cutting capacity (solid material): M 32 mm Motor power: 1.5 / 3 kW Tool holder: MT 4 Quill stroke: 170 mm Stroke approx.: 400 mm Spindle speeds: Kodezfwh Hjpfx Ac Hsna - Range 1, infinitely variable: 38 – 192 rpm - Range 2, infinitely variable: 119 – 596 rpm - Range 3, infinitely variable: 400 – 2000 rpm

Kondisi: diremajakan ulang (bekas), Perbaikan papan kecepatan untuk berbagai model. Hubungi kami jika tingkat transmisi tidak lagi berfungsi sebagaimana mestinya. Knsdpfsy Rfzuox Ac Hja

Kondisi: bekas, Tahun pembuatan: 2007, Drilling capacity in steel (diameter): 40 mm Arm reach: 1,050 mm Spindle speed: 15 – 2,800 rpm Feed range: 0.075 – 0.45 mm/min Dimensions (L x W x H): 2,450 x 1,300 x 2,300 mm Weight: 1,500 kg Equipment: • Machine in top condition • Serviced and overhauled by factory customer service in 2026 Machine Features: • Worktable 1,800 x 600 mm with 4 T-slots • Arm travel: 1,050 mm • Drill spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of machine base • 2 x 18 mm T-slots on the left side of machine base • Thread cutting device • Centralized lubrication Ksdsy Nd T Hepfx Ac Hsna • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 410 mm Distance spindle nose – min./max. (to table): 70 / 680 mm Distance spindle nose – min./max. (to floor): 970 / 1,580 mm Drilling radius: 540 – 1,590 mm Worktable height: 900 mm Machining Values Drilling capacity (solid material): - St 60: Ø 40 mm - GG 22: Ø 50 mm Thread cutting: - St 60: M36 - GG 22: M42 Main Spindle Drive AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2,800 rpm Max. torque: 250 Nm, constant from 15 – 2,000 rpm Feed Drives X-axis: AC servo motor 0.25 kW Y-axis: AC servo motor 0.25 kW Z-axis: AC servo motor 4.5 kW W-axis: AC servo motor 2.5 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feed: 5 – 2,000 mm/min Accuracy Positioning accuracy X, Y axis over 1,200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1,800 x 600 mm table): 2,800 kg CNC Control Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: Backlit TFT flat screen, easily readable from all angles, 215 x 160 mm Position displays: Cartesian or polar, values absolute or incremental, units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data proposals Tool management: max. 500 tools Subprogram technology: yes Standard software options: dialog programming, 38 zero point offsets, rotate and mirror, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point determination: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Kapasitas pengeboran St 60/GG 22: 40/50 mm Pengeboran berulir St 60/GG 22: M 36/M 45 Luas meja penjepitan: 600 x 1800 mm Penyesuaian tinggi lengan: 450 mm Radius pengeboran kecil/besar: 305/1305 mm Ksdpfx Ajy I Ua Iec Hona Pemasangan spindel: SK 40 Langkah pinol: 200 mm Kecepatan spindel tanpa langkah: 15 - 2800 rpm Feed tanpa langkah: 5 - 2000 mm/menit Penggerak spindel, dikontrol frekuensi: 5,5 kW Koneksi listrik: 400 V, 14 kVA Berat: 3400 kg Kebutuhan tempat: 3800 x 2000 x 2500 mm

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Knodpfx Ajynt Ucjc Hoa Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Ksdoyhdvkspfx Ac Hsna Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram