Beli Atm Recyclingsystems Gmbh Arnoshred Sse 700 bekas (74.147)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Itsdpfx Afeyhn H Tjisf

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan HÄCKER filter press tipe 01.080 yang telah direkondisi pabrik dengan kontrol otomatis. Elektrohidrolik dengan silinder kerja tunggal Desain tinggi untuk penempatan di bawah kontainer miring Pengontrolan pompa pengisi dengan deteksi penuh secara otomatis. Data teknis: Kondisi: bekas, direkondisi pabrik Ukuran pelat: 800x800mm Iedsyhnyaopfx Afistf Jumlah ruang: 40 Ketebalan kue: 25mm Kapasitas: 500 liter Luas filtrasi: 44 m² Tekanan pengisian: 10 bar Aliran keluar terbuka melalui sudut filtrat, dilengkapi talang filtrat, tersedia pelat tetes. Sebagai pelengkap filter press ini, kami juga dapat menawarkan pompa piston HÄCKER bekas. Untuk detail lebih lanjut dan pertanyaan teknis, silakan hubungi kami melalui nomor telepon atau email yang tertera.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, jam operasional: 5.612 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 550 kg, tinggi total: 2.800 mm, berat keseluruhan: 12.000 kg, tinggi transportasi: 2.800 mm, kapasitas tangki oli: 300 l, daya: 30 kW (40,79 hp), laju aliran volumetrik: 332 m³/jam, Technical Data for the Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of manufacture: 2014 Operating hours: 5,612 hours as of August 2025 Main press force: 48 t Specific pressing force: 58.2 N/cm² Feed hopper dimensions: 1,250 x 1,020 mm Theoretical cycle time: 11.2 seconds Theoretical throughput: 332 m³/hour Bale dimensions: 1,100 x 750 x 600 to 1,200 mm Drive power: 30 kW Total connected load: 32 kW Rated current: 59 A Tying: 4-fold horizontal, fully automatic Throughput rates depending on bulk density: - At 20 kg/m³ up to 6 t/hour (material dependent) - At 50 kg/m³ up to 13 t/hour (material dependent) Bale weight: up to 550 kg (material dependent) PLC control: Siemens SIMATIC S7-200 Operator panel: Siemens HMI Touch Panel Hydraulic tank capacity: 300 L Oil type: HVI 46 Isdpfsvtpq Hox Afietf Machine installation dimensions with bale chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport dimensions of baler: 8,500 x 2,500 x 2,750 mm (L x W x H) Machine weight (baler): approx. 12 t Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire spool boxes for 8 units of 40 kg wire spools, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in pressing direction; the needle unit is located on the right side and can be folded backwards for transport. The baler has been partially overhauled and tested in our workshop, see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Inspection by appointment. We cannot accept liability for technical data or possible errors.

Kondisi: baru, Tahun pembuatan: 2026, en: Machine Description: Gantry Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 Year of Manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit Description: • For the production of various types of pallets and crate components • Inclined machine frame with wooden wall for templates • Divided into two work areas, the operator always works alternately on the left or right side of the machine • The nailing bridge is equipped with up to 6 individually controlled nailing units with jumbo coils (approx. 6,000 nails) • Machine operation and programming of new pallet types via touch display • Existing programs can be recalled from memory at any time • Entered parameters are visualized on the touchscreen—no manual positioning required for teaching nailing points! • NEW – Robot for pallet stacking! Technical Data: • Max. pallet size standard: 3000 x 1700 mm per side • Max. pallet size optional: 4000 x 2000 mm per side • Maximum nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 - 600 pallets/8 h • Operators: 1 – 2 people • Low operating and maintenance costs fr: Désignation de la machine : Cloueuse portique pour l’industrie des palettes et de l’emballage Fabricant : Stoiber GmbH Modèle : StoNail 7000 Année de fabrication : 2026 État : Neuf Prix & Localisation : Prix sur demande 4122 Arnreit Description : • Pour la production de différents types de palettes et pièces de caisses • Châssis incliné avec panneau en bois pour les gabarits • Répartie en deux zones de travail, l’opérateur travaille alternativement à gauche ou à droite de la machine • La traverse de clouage est équipée de jusqu’à 6 unités de clouage commandées individuellement avec des bobines jumbo (env. 6 000 clous) • Commande de la machine et programmation de nouveaux types de palettes via écran tactile • Les programmes existants peuvent être rappelés à tout moment depuis la mémoire • Les paramètres saisis sont visualisés sur l’écran tactile : aucun positionnement manuel nécessaire pour l’apprentissage des points de clouage ! • NOUVEAU – Robot empileur de palettes ! Données techniques : • Taille max. de palette standard : 3 000 x 1 700 mm par côté • Taille max. de palette en option : 4 000 x 2 000 mm par côté • Longueur max. des clous : 130 mm • Bobine jumbo : env. 1 000 clous/bobine • Capacité de production : 400 – 600 palettes / 8 h • Opérateurs : 1 à 2 personnes • Faibles coûts d’exploitation et d’entretien es: Designación de la máquina: Clavadora de pórtico para la industria de palets y embalajes Fabricante: Stoiber GmbH Modelo: StoNail 7000 Año de fabricación: 2026 Condición: Nueva Itsdpsrallnsfx Afief Precio y ubicación: Precio a consultar 4122 Arnreit Descripción: • Para la producción de diferentes tipos de palets y componentes de cajas • Bastidor de máquina inclinado con panel de madera para plantillas • Dividida en dos zonas de trabajo, el operario trabaja alternativamente a la izquierda o derecha de la máquina • El puente de clavos está equipado con hasta 6 unidades de clavado controladas individualmente con bobinas jumbo (aprox. 6.000 clavos) • Manejo de la máquina y programación de nuevos tipos de palets mediante pantalla táctil • Los programas existentes pueden llamarse de la memoria en cualquier momento • Los parámetros introducidos se visualizan en la pantalla táctil: ¡no es necesario recorrer manualmente para enseñar los puntos de clavado! • NUEVO – Robot para apilado de

Kondisi: baru, Tahun pembuatan: 2026, en-GB Itodperallrsfx Afijf

Kondisi: baru, Tahun pembuatan: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1,500 kg Itsdpfx Afei Ar Rueief

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after prior configuration. In addition, the software can read variable data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. Use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral arms for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064nm • Marking field size: 150x150mm (optional larger) • EZCAD marking software in German/English • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measurement system • Optional: Autofocus system – automatic determination of focus distance • Optional: Extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower to indicate machine status • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system Iodeu Smd Espfx Afiotf • Height-adjustable monitor and keyboard shelf • Frame made of aluminum profile • Air cooled • Door width approx. 700mm / Door pass-through height: 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, en-001 Itsdpfx Asunh H Ssfief

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: siap digunakan (bekas), 6230 - ITALPRESS Band Saw Motor power: 3 kW Table length: 103 cm Table width: 71 cm Maximum cutting height: 3200 mm Maximum cutting width: 6700 mm Itsdpfx Afju Up S Usief Wheel diameter: 700 mm Manual brake Maximum blade length: 5020 mm Minimum blade length: 4920 mm Star-delta starter Manually adjustable fence Voltage: 380 V Dimensions (W x L x H): 1400 mm x 800 mm x 2200 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Electrical connected load: 19.1kW Control voltage: 24V DC Air pressure: 6bar Production capacity: 20 x 2m modules/hour Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (width x height x depth) Stations: Decoiler: This station receives the coil and unwinds the product component. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Itodpjxzug Sefx Afisf Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product component using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings via laser on the rear module edge of the product component, as well as inspection of the correct opening of the contacts using pneumatic Ignum contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO2 Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test materials. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product component using an applicator. Contact busbar applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact busbar to the rear module edge of the product component using an applicator. Soldering station: Establishing electrical contacts by soldering the preforms (solder pads) to the contact busbar. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product component by flashing and simultaneous contacting using pneumatic Ignum contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: No processing of the product component currently. Recoiler: This station receives the coil and recoils the product component. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Tahun pembuatan: 1989, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: K 1283, A used bending machine from manufacturer HMK. Pressing force up to 500 t Year of manufacture: 1989 Iodjd Eg R Tjpfx Afijtf Machine number: 1283

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0640, berat kosong: 2.200 kg, berat muatan maksimum: 20.000 kg, berat keseluruhan: 22.200 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 01/2025, inspeksi berikutnya (TÜV): 01/2026, panjang ruang muatan: 5.000 mm, lebar ruang muat: 2.200 mm, ukuran ban: 23x10-12 SE, warna: oranye, Tahun pembuatan: 2025, berat operasi: 22.200 kg, TPW 206 AL - AS SE Payload 16,000 kg on the loading area at 6 km/h. Dimensions: 5,000 mm long, 2,200 mm wide, and 680 mm high. Transport deck made from spruce wood, 40 mm tongue and groove. Tyres: Superelastic profile 23x10-12 with steel rims, double-cone bearings sealed with Nilos ring. Towing bar with drop protection and height adjustment, towing eye 40 mm. Steering: all-wheel stub axle steering. Safety: Welded lashing brackets, five per longitudinal side (see load securing), and double-acting wheel chock mounted to the frame. Paint: Yellow Orange RAL 2000. Ijdpfx Aorcf H Uofiotf

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, panjang kontainer: 12 kaki, Due to a change in the heating concept at our biogas plant, we are selling this fully functional dryer. It can be inspected while in operation. Dismantling, transport, and reinstallation can be arranged upon request. Iodpfxsvg Nwao Afiotf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Briquette diameter: 40 mm Connected load: 4.1 kW Pressing force/capacity per hour: up to 30 kg/h, depending on material Container height: 900 mm Hopper opening: round, 800 mm diameter PLC controlled Hydraulic tank capacity: 50 l Rotary encoder automatic ON/OFF with level sensor Itjdpfxjw Ewpge Afiof Oil temperature monitor Conveyor pipes Fully functional used machine

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system provides solutions for complex geometries with standard radii of 2xD for tube dimensions ranging from 20 to 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD can also be reliably achieved in serial production. With a tool height of 120 mm, there is ample capacity for special profiles as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid design of the mandrel support and bending arm, contribute to the desired bending results. The plug-in bending tools enable quick changeovers to other tube sizes. The clamping force for tube fixation is fully adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angle, length, and twisting angle for up to 50 bend sequences per tube length. A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In "Simple Bending", the length and angle of the bends are automatically displayed relative to each other. In the "Controlled Bending" mode, the data is stored beforehand and a permanent target/actual comparison is conducted during the bending process. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal fabrication • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control; bend angle adjustment (0.1°) • Mandrel support lengths: 3000/4500/6000 mm • Maximum 180º bend result • Weight: 1600–3200 kg (depending on version) • Ergonomic operation via safety foot switch Itjdpfxonh R Sus Afisf OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and twist positioning via automatic braking function or manual stops using foot switch • Semi-automatic length and twist positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information session at your location • Advice and acquisition via leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Tahun pembuatan: 2024, Kondisi: baru, Eroded punching knives made from solid steel Our punching knives are manufactured from selected steel grades and are available in a wide range of geometries and standards such as ISO, DIN, JIS, ASTM, and IEC. Key features include: - Expert selection of steel - Material-specific cutting geometry Itsdpjkkhkujfx Afijf - Optional configuration with various sample ejectors and clamping pins - Custom production in different heights possible - Also available as multi-cutter - Excellent cutting finish - Optimal cutting results - Suitable for all types of presses, e.g. manual toggle presses, pneumatic and hydropneumatic presses

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: STHP 80KN, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 8 t, lebar meja: 300 mm, panjang total: 200 mm, lebar total: 510 mm, tinggi total: 1.320 mm, berat keseluruhan: 110 kg,

Tahun pembuatan: 2024, Kondisi: baru, Super Dumbbell – the ultimate cutting die with interchangeable precision blades The Dumbbell cutting die, equipped with an integrated spring ejector and 5 sets of replacement precision blades, forms a set of 6 cutting dies and is perfectly suited for both manual and pneumatic presses. Outstanding value for money “6 blades for the price of one” Interchangeable precision blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum edge retention • Easy replacement Itjdpfski Tqcex Afiof • No regrinding necessary • No downtime • Ultra-thin symmetrical blades minimize concave specimen cross-sections (fig. 1) • No more premature tearing of specimen strips • Up to 10% higher tensile strength and elongation at break values • Extremely smooth cut surfaces (fig. 2) • Available individually at any time Guarantees: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • Elastomers, plastics, and others • All types of standards such as ISO, DIN, JIS, ASTM, IEC

Kondisi: baik (bekas), Radial fan, chip extraction blower, fan, extraction unit, chip blower Isdpfxob Iqf Nj Afiotf - Motor power: 37 kW - Speed: 1,470 rpm - Volume flow: unfortunately not specified - Total pressure: - Pa - Inlet connection: Ø 700 mm - Outlet connection: Ø 700 mm - Dimensions: 1,750/1,700/H2,460 mm - Weight: 900 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 705 mm, diameter pembubutan: 356 mm, lubang spindel: 81 mm, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 795 mm, gerak cepat sumbu X: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, tinggi total: 2.220 mm, panjang total: 3.100 mm, lebar total: 1.920 mm, berat keseluruhan: 6.200 kg, saluran batang: 80 mm, Langkah pena ekor: 734 mm, Perlengkapan: dokumentasi / manual, CNC Lathe Mori Seiki NL2500Y/700 – with Y-Axis – Used & Fully Refurbished, Immediately Ready for Operation Machine in excellent condition, fully overhauled by qualified technicians and fully functional. Suitable for high-precision machining with Y-axis and driven tools. Main specifications: - Year of manufacture: 2005 - CNC: Mori Seiki MSX-850 - Max. swing diameter: 755 mm - Max. turning diameter: 356 mm - Max. turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4000 rpm - 12-station turret - Driven tools up to 6000 rpm - Supplied with: 4 driven toolholders and 7 static toolholders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Other features: - Tailstock (734 mm travel, MT3 mount) - Belt-type chip conveyor - Tool presetter - Parts catcher Dimensions and weight: - Machine footprint: 3100 x 1920 x H 2220 mm - Weight: 6200 kg Itodpjvw Acksfx Afisf Machine supplied with: - 2x radial driven toolholders - 1x axial driven toolholder - 8x static toolholders (boring bar holders and turning toolholders) Machine available for testing and demonstrations at our showroom or via video call and is immediately ready for use.

Kondisi: bekas, completely stainless steel suitable for thermal oil heating conveyor length: 7,000 mm track width: 700 mm variable speed control infeed conveyor outfeed conveyor Ijdpfsy D Ixijx Afiotf dirt removal filter mechanical lifting device external dimensions (L x W x H): approx. 12,500 x 2,400 x 3,900 mm thermal heating capacity: 254 kW

Kondisi: bekas, kapasitas tangki: 700 l, UMUM Perlengkapan: katup cakram Desain: berdiri Keterangan: Rangka: besi; Diameter manhole: sekitar 380 mm; katup keluaran baru (katup cakram) tersedia opsional seharga €295; Diameter luar: 940 mm Lebar total: 1.050 mm Tinggi total: 1.750 mm Panjang total: 1.050 mm Tekanan lebih maksimal: 0,5 bar Lokasi: gudang luar Volume: 700 liter Material bersentuhan produk: V4A 1.4401/04 (AISI316) Kondisi: bekas Tinggi silinder: 940 mm TANGKI Dasar bawah: dasar kerucut Tipe penyangga: rangka PERLENGKAPAN Manhole/dome: di bagian atas Outlet: 51 mm Catatan: kontaminasi ringan Itjdeyckzpepfx Afief

Kondisi: bekas, volume: 700 L usable volume: 80–500 L internal diameter: 1,100 mm suitable for vacuum: -1 bar Itedpfx Aeyf D E Tofijf double-walled: +3 bar power: 18.5 kW with frequency converter speed: approx. 3,000 rpm (at 50 Hz) IP54 suitable for heating and cooling stainless steel 316L + homogenizer

Tahun pembuatan: 2026, Kondisi: baru, MSP 700 Belt Filter Press The entire system can be dismantled down to the base frame in just a few minutes! Fully automatic fruit and vegetable press with a closed work chamber to minimize oxidation. Two high-pressure nozzles are mounted under the machine and rotate continuously to ensure optimal performance. The minimal distance between the press rollers and the juice collection tray eliminates foaming issues. Most machine components can be dismantled without tools, making cleaning easy. Equipped with heavy-duty, vibration-damping machine feet. Requires only minimal maintenance. Technical Specifications: - Capacity: 700 kg/hour Itsdjrz I Dkspfx Afief - Power requirement: 1.5 kW, 400 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 2200x1300x1200 mm - Filling height: 1200 mm - Wastewater connection: 40 mm - Dry residue discharge height: 470/770 mm - Weight: 890 kg - Integrated juice pump, collection tank, and level switch - Touchscreen control - IP65 rated electronics - Extra high juice yield: 75% (depending on freshness and quality of produce) - Air requirement: 50 l/hour at 6 bar - High-pressure water requirement: 360 l/h - Frequency converter: Speed control for even more professional processing - High-strength, food-grade polyester press belt, fiber thickness: 2 mm, fabric density 6×16 fibers/cm², ½ twill weave (suitable for juicing without coarse fibers) - Easy to clean - Requires minimal maintenance - Adjustable, with vibration-damping machine feet - Rotating brush roller for belt cleaning A high-pressure cleaner and air compressor are required for operation.