Beli Biesse Rover 6.40 Conf.1 Ft bekas (82.427)

Kondisi: bekas, Tahun pembuatan: 2013, Machining center with automatic robot for loading and unloading panels Numerical control Biesse XP600 with graphical interface software Biesse Works ADVANCE – machine and office version WRT technology (Windows Real Time): The machine control logic is processed directly on the PC and not on a dedicated special device Working area in X-axis: 6200 mm Working area in Y-axis: 1552 mm Working range in Z-axis: 180 mm Z-axis travel: 235 mm No. 2 working fields in X-axis Bar worktable / Console No. 10 EPS electronically adjustable bars for suction pad holders 8 pneumatic Bakelite rods for panel lifting – loading/unloading aid No. 4 electronically adjustable EPS suction pads per bar with vacuum seal for panel clamping during machining No. 1 vertical electrospindle with automatic tool changer, motor 12 kW – 12000 rpm – flange for aggregates – C-axis vector ready Automatic tool change system with 12 places – mounted on machine head Drilling head BH35L with spindle arrangement as follows: - No. 14 vertical in X-axis - No. 10 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Independent saw blade for grooving in X-axis – diameter 120 mm Carpet front protection and safety system Perimeter safety fence Automatic lubrication system Ksdpokvrxuefx Aa Djdp Machine-controlled cooling and cleaning system with air conditioner Vacuum pump mc/h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning Independent operating panel Panel alignment table Barcode reader on robot arm Panel feed system via: * 1 motorized roller conveyor for preloading panel stacks * 1 translating motorized roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical data: * Type: KR210-2 * Number of axes: 6 * Permissible rated load: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min/max length: 300/3000 mm * Panel dimensions – min/max width: 180/1500 mm * Panel dimensions – min/max thickness: 8/60 mm * Max. panel weight: 90 kg

Kondisi: bekas, Tahun pembuatan: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office control Working area X-axis: 3,228 mm Working area Y-axis: 1,580 mm Working area Z-axis: 200 mm with suction cups H74 mm Working area Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support rails Pneumatic clamping installation, divided into two Y zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for rails Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK cone connection, 20,000 rpm Automatic tool changer with 16 positions on the X-axis carriage Independent Tesa drilling spindles BH17 are arranged as follows: No. 5 independent spindles for vertical drilling in the X direction No. 5 independent spindles for vertical drilling in the Y direction No. 4 spindles for horizontal drilling in the X direction No. 2 spindles for horizontal drilling in the Y direction No. 1 blade integrated into the drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with premelter – edge pressure system with double rubberized roller for spokes, max. inner diameter 30 mm and sensor for edge joint – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – option for manual edge insertion Plastic edge thickness: 0.4 to 3 mm Wood edge thickness: 0.4 to 2 mm Laminate edge thickness: 0.4 to 1.2 mm Maximum edge width: 65 mm Workpiece thickness: 10 to 60 mm Minimum machinable internal radius with edging: 30 mm Maximum external radius for edges (proportional to edge thickness and stiffness): * 10 mm with up to 1 mm edge thickness * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum size of edged panel: 300 x 300 mm Minimum internal diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Edge magazine with 2 positions in the safety enclosure for edges up to max. thickness 65 mm Finish additive cleaning station with automatic dispensing of special cleaning fluids and cleaning cycle Kedpfx Aougpwnja Dodp No. 1 unit for rounding/contouring edges No. 1 EF60A combination unit trimmer/scraper Perimeter safety fence Chip extraction system with motorized conveyor Liquid cooling system Automatic lubrication system No. 1 vacuum pump, 250 m³/h TECHNICAL DATA TO BE CONFIRMED

Kondisi: bekas, Tahun pembuatan: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment allows for the design of the finished product, process definition, work plan setup, simulation of machining operations on the 3D model of the machine, and generation of the necessary machine programs. bSolid – 3-axis machining bSolid – 5-axis machining module for surface operations using 5-axis units and interpolation movements across all 5 axes (X, Y, Z, C, B). The module includes the following commands: • 3D roughing and finishing operations assigned to surfaces • Extension or projection of toolpaths onto a curved surface • Machining on a plane • Following 2D or 3D curves with any tool type bSolid – 3D engraving bSolid – Import external formats Work areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H = 74 mm Z = 245 mm with modules H = 29 mm Clamping area in Y: * 1650 mm, with a thickness of up to 60 mm on modules with a height of 74 mm * 1600 mm, with a thickness over 60 mm on modules with a height of 74 mm. 10 ATS levels – 40 carriages. The system includes: • 2 aluminium bars (1 left/1 right) on which the lateral stops glide. • 10 aluminium work tables. The tables slide on hardened and ground linear guides with recirculating ball bearings. Locking on both linear guides, front and rear, is achieved by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones along X. Automatic positioning (EPS) for work tables. “EPS” (Electronic Positioning System): Device for automatic NC-controlled positioning of work tables and carriages, including locking mechanisms to exclude possible operator errors. Rear row stop, 140 mm stroke Intermediate row stop, positioned at 405 mm, 140 mm stroke Front row stop, positioned at 1460 mm, 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) per system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check whether the stops are lowered 12 clamps for holding narrow workpieces 6 loading aid bar lifters, for H = 74 mm module 5A configuration, for Rover B. Configuration for high productivity and flexibility thanks to two processing units (4 and 5 axis) and the option for simultaneous tool change. Includes axes and carriages for the movement of the main processing units. Comes with 2 inverters. Second Y-axis. Allows separation of front and rear Y carriages with independent drive. Both Y carriages reach a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 operation • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 operation • Ceramic bearings • Clockwise and counterclockwise operation • Speed programmable by NC from 1,000 to 24,000 rpm • Release via pneumatic actuator using prismatic linear guide and recirculating ball bearings • Cover included for chip extraction with 6 positions Kdjdpfx Aaow D E A Eo Djp ...

Kondisi: bekas, nomor mesin/kendaraan: 008483, de2en-01 Kjdjyxmx Rspfx Aa Djdp

Kondisi: sangat baik (bekas), Double-Sided FORMAT & EDGE BANDING MACHINE (First machine in a production line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Panel Thickness (min/max) mm: 10 - 60 Working Width (min/max) mm: 270 - 1200 Control System / Software: SINITRA Feed Speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Kdedpfx Aaet N Ix Ro Dsp Safety and Noise Protection: Enclosed cabin Side Adjustment of Aggregate Carrier: Manual FORMATTING UNIT (for each side): 2 x DT 10 Pre-milling Units (5.8 kW each) Free space for jointing unit FS Jointing Unit ES30 + ER30 (5 kW each) 0° - 90° Universal Milling Unit Softforming SF 10 (2 x 2.4 kW) 0° - 45° Spraying Unit (for liquid release agent) EDGE BANDING SECTION (for each side): Gluing Unit (Hot Melt Adhesive + Pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating Unit RP 10 Edge Pressure Zone (CNC-controlled) Pressure Roller Track (revolver) for Straight Edges and Softforming (softforming) Soft PF40 (4 Pos.) mm 800 (Guillotine CI10+CS10+RL10) - Edge Magazine for Rolls (6 positions) Milling Unit RS 10 (2 x 1.3 kW) Milling Unit Softforming RF 10/SF (2 x 0.65 kW) Multi-profile Milling Unit RF 30 (2 x 0.65 kW) Universal Milling Unit for Grooving/Rebating and Profiling FB 30 (2 x 4.5 kW) 0° - 90° Multi-profile Scraper Unit RB 30 Flat Scraper Unit RC 05 / Soft Spraying Units (for polishing liquid) + Buffing Unit SZ 30 (2 x 0.37 kW)

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 5.900 mm, jarak lintasan sumbu Y: 1.560 mm, kecepatan pemakanan sumbu X: 80 m/menit, laju pemakanan gandar Y: 60 m/menit, kecepatan rotasi (maks.): 20.000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working range: 5,900 mm Y-axis working range: 1,560 mm X-axis traverse speed: 80 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles (X-direction): 6 Horizontal drilling spindles (Y-direction): 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Kjdpfx Aaeyxm Sws Dodp Motor power: 10 kW Speed: 20,000 rpm Tool magazine Number of positions: 10 Tool: positioned on the head MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Worktable with suction pads Number of rails with suction pads: 10 Vacuum pads for securing the workpiece Vacuum pump The machine is sold and delivered in its current technical and legal condition (‘as seen and approved’), based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8173

Kondisi: bekas, nomor mesin/kendaraan: 008184, Ruang kerja sumbu X: 8200 mm Ruang kerja sumbu Y: 1600 mm Bidang kerja: dengan dudukan konsol vakum Daya spindle utama: 13 kW Jumlah sumbu terkontrol: 5 sumbu Jumlah tempat alat: 22 Kdsdpfxoyxmv Ns Aa Dsp

Kondisi: bekas, nomor mesin/kendaraan: 008338, de-01 Kdsdpex A Tkxsfx Aa Dop

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Rover Multi Up M C S CNC Machining Centers Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage*: Y = 1900 mm Axis Travel Paths*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Segmentation of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. The support movement is guided by linear guides with recirculating ball carriages. Clamping is performed on the front and rear linear guide using pneumatic cylinders. Clamping is released via a push button located on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping The vacuum modules can be rotated by 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA Set-Up Assistant Table for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position display. — Sensors on each work table and along the X-axis of the working area. — Indication of the direction and position reached during positioning phase, mounted on each work table The system, according to work table programming, suggests to the operator the moving direction for each work table and carriage, indicating with a green LED and audible signal when the position is reached within a tolerance of ± 1.5 mm. Segmentation of pneumatic system into 2 working zones in X Machining unit with 5 interpolating axes, 13 kW (17.4 HP), with HSK F63 adapter, liquid cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting of aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions on the machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. HSK F63 tool holder, equipped with an extended integrated flange, suitable for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech Tool Kit Complete set of tools for acceptance test Comprising the following 9 parts Replacement of the standard PC with a high-performance PC. Digital devices for measuring tool length for diameters up to 130 mm. bSolid Kdsdpfx Ajy Ehrxsa Djp NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1 license WorkCenter suction cup recommendation 5-axis simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg – Immediately available –

Kondisi: baik (bekas), Tahun pembuatan: 2006, Saya menjual pusat pemesinan CNC 3 sumbu Biesse Rover A3.30 dengan meja lintang. Tahun pembuatan 2006. Konfigurasi: Spindel utama 3 sumbu HSD Majalah perkakas 14 posisi ISO30 di kepala 1x gergaji alur sumbu X Kepala pengeboran 14+4+2 spindel pengeboran Kdodpfx Aszmnzmea Djp Luas permukaan kerja yang dapat digunakan 3130x1250mm. 2 permukaan kerja, 4 zona penjepitan Sistem Uniclamp termasuk Sistem pelumasan pusat otomatis Total daya 17kW Perangkat lunak Biesse Works dengan manual pengoperasian. Pompa Becker 110 m3/jam. 2,4KW Vakum tambahan untuk pekerjaan membuat templat atau perangkat penjepitan tambahan. Kondisi baik. Tersedia segera dari gudang. Perlu perbaikan: Pegangan pada meja lintang, rotasi majalah ISO30 di kepala.

Kondisi: bekas, Ferwood Code: RU0000986 - Condition: Used - Compatible Machine: CNC BIESSE ROVER - If interested, we offer overhaul service, please contact us. Kdsdpfx Aasvazkfj Dop

Kondisi: bekas, Tahun pembuatan: 2010, Rentang kerja X = 4.600 mm Y = 1.535 mm Z = 275 mm Dirancang untuk aplikasi tugas berat, sehingga ideal untuk pemesinan komponen kayu solid besar dan kayu konstruksi. Kepala pemesinan yang dikontrol 5 sumbu memungkinkan produksi benda kerja tiga dimensi yang kompleks. • Sistem pelumasan terpusat • Komputer desktop o CPU Intel Celeron D 2,66 GHz atau lebih tinggi o RAM 512 MB o Hard drive 40 GB o Monitor LCD 15 inci o Keyboard o Mouse o Drive CD-ROM o Port paralel o Port serial RS-232 o Port USB o Kartu Ethernet untuk koneksi ke jaringan kantor • Layanan jarak jauh o Akses modem langsung untuk diagnostik dan layanan jarak jauh • Lemari kontrol listrik • Pendingin udara untuk lemari listrik • Sistem keselamatan o Dua alas keselamatan sensitif tekanan di sisi depan mesin dengan unit kontrol terintegrasi, memastikan operasi bolak-balik yang aman. • Lampu sinyal untuk operasi mesin bolak-balik (pendulum) • Fungsi pemulihan pekerjaan o Memungkinkan pemesinan untuk dilanjutkan setelah pemberhentian darurat. • Sistem perlindungan keselamatan CE Meja kerja dan aksesori • Meja multi zona untuk 10 balok dan 40 pod vakum o Memungkinkan beberapa benda kerja untuk dimuat secara bersamaan, mengurangi pergantian alat dan meningkatkan produktivitas. o Sistem penjepitan vakum o Sistem penjepitan pneumatik Kdedezlz Svopfx Aa Dep • 10 balok ATS, masing-masing dilengkapi dengan 4 pod vakum, L = 1.525 mm • Meja EPS yang diposisikan secara elektronik untuk 10 balok • Baris penghenti belakang untuk 10 balok dengan jarak 115 mm • Baris penghenti tambahan pada 375 mm dengan jarak 140 mm • Baris penghenti tambahan pada 770 mm dengan jarak 140 mm • Baris penghenti depan pada 1.175 mm dengan jarak 140 mm • 4 penghenti samping dengan jarak 140 mm (2 kiri + 2 kanan) lengkap dengan perangkat keras pemasangan • 2 penghenti samping tambahan dengan jarak 140 mm (1 kiri + 1 kanan) lengkap dengan perangkat keras pemasangan • Sensor posisi untuk semua penghenti • 4 perangkat pengangkat untuk memudahkan pemuatan dan pembongkaran benda kerja untuk modul H = 74 mm • Unit vakum 132 × 146 × H74 mm • Unit vakum 132 × 75 × H74 mm • Unit vakum 132 × 54 × H74 mm • Sistem penjepitan benda kerja UNICLAMP • Kit pembuatan jendela H = 74 mm, 40–98 mm • 6 klem penghubung cepat dua arah UNICLAMP • 2 modul UNICLAMP untuk benda kerja pendek • Konveyor serpihan dan limbah • Generator vakum untuk pompa vakum 250 m³/jam o Pompa vakum 250 m³/jam • Spindel dan peralatan pemesinan • Daya motor: o 12 kW pada 12.000 rpm (operasi S1) o 15 kW pada 12.000 rpm (operasi S6) • Kecepatan spindel maksimum: 22.000 rpm • Antarmuka alat: HSK F63 • Sumbu C: berkelanjutan 360° • Sumbu B: ±100° • Unit pendingin dengan kapasitas pendinginan 1.600 W • Majalah alat 15 posisi untuk kepala 5 sumbu • Gerobak Z tambahan untuk unit belakang • Elektrospindel PEAK POWER 8,6 kW dengan antarmuka HSK F63 dan pendinginan udara, dirancang khusus untuk aplikasi yang membutuhkan torsi tinggi pada kecepatan spindel rendah • Unit putar sumbu C yang digerakkan gigi (360°) • Unit pengeboran BH9 o 9 spindel pengeboran yang dikontrol secara independen o Termasuk: o 5 bor vertikal dengan jarak 32 mm o 2 bor horizontal keluaran ganda independen o Motor penggerak 3 kW terpisah • Majalah alat 22 posisi dengan jarak tengah 180 mm • Sistem pelumasan otomatis Dua set alat Leitz tersedia seharga 22.000 EUR + PPN: • Set alat LEITZ IV 68 • Set alat LEITZ IV 90 Mesin ini ditawarkan untuk dijual atas nama pelanggan. Pemeriksaan dapat dilakukan dengan perjanjian seb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Area kerja X: 3640 mm Area kerja Y: 1342 mm Jarak pergerakan benda kerja: 180 mm Spindle elektrik sumbu C dengan daya 12 kW, dudukan ISO30 Jumlah mata bor untuk pengeboran vertikal: 24 Jumlah mata bor untuk pengeboran horizontal X: 6 Jumlah mata bor untuk pengeboran horizontal Y: 4 Mata gergaji untuk pembuatan alur searah X Pengganti alat revolver dengan 12 posisi Meja kerja dengan 6 rel dengan EPS, penempatan rel otomatis menggunakan vakum Sabuk konveyor serpihan 1 Pompa vakum dengan kapasitas 90 m3/jam Kedszmff Njpfx Aa Dedp Alas keselamatan Berat sekitar 4000 Kg. Termasuk 3 unit tambahan (untuk pembukaan pintu, anuba, dll.), vakum, dan beberapa penjepit Uniclamps Hanya 1406 jam penggunaan untuk spindle elektrik 4 sumbu, dan 831 jam untuk mesin bor Tersedia mulai Januari 2027

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 3.200 mm, lebar benda kerja (maks.): 1.200 mm, tinggi benda kerja (maks.): 80 mm, Perlengkapan: dokumentasi / manual, Mesin frais CNC Rover 342 Kedjzl Uayspfx Aa Dedp dengan 1 motor frais dan mata pisau serta kotak bor silang berfungsi penuh tetapi telah dilepas oleh penjual dari sebuah pabrik yang sudah tidak beroperasi.

Kondisi: belum diuji (bekas), Tahun pembuatan: 1999, Fungsionalitas: belum diuji, 24 spindle vertikal, 10 spindle horizontal, penukar alat 7 posisi, 8 meja kerja vakum dengan penunjuk posisi digital, gearbox sudut yang dapat diganti. Panjang meja kerja efektif: 3200 mm, lebar meja kerja: 925 mm. Kedpfex Iulwex Aa Djdp

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2002, Fungsionalitas: fungsi terbatas, Halo, Dijual Mesin CNC Milling Rover 22. Kdodpfjzhl Iaex Aa Dop Perlu perbaikan. Mesin tidak mengambil dan mengembalikan semua alat dari magazin. Dalam periode terakhir, mesin bekerja hanya dengan satu alat. Harga yang tercantum dalam iklan adalah harga netto, belum termasuk PPN. Mesin dapat dilihat di Starachowice, Jl. Kwiatkowskiego 13. Kontak telepon dari jam 7:00 hingga 15:00.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Kdsdpfx Aajx D H Hcs Dep Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Pusat pemrosesan CNC 4-sumbu dengan spindle milling, kepala bor, dan penukar alat Area kerja: Sumbu X: 3.060 mm Sumbu Y: 1.380 mm Stroke sumbu Z: 250 mm Meja penjepit: 6 bantalan benda kerja ATS 3 suction cup per bantalan benda kerja Setiap bantalan benda kerja dilengkapi 1 layar digital untuk menampilkan posisi bantalan dan 3 suction cup Posisi suction cup dapat diprogram 4 rel angkat untuk benda kerja berat Kapasitas pompa vakum 90 m³/jam Perlengkapan unit: Unit milling dengan motor 7,5 kW, Kecepatan putar 1.500 - 20.000 rpm Mounting alat ISO 30 Arah putar kanan/kiri Sumbu C 360 derajat untuk pemasangan unit adaptor Majalah alat 10 slot yang bergerak bersama support dalam arah X Pengeboran vertikal: Sumbu X: 7 spindle, jarak 32 mm Sumbu Y: 7 spindle, jarak 32 mm Pengeboran horizontal: Sumbu X: 2 + 2 spindle Sumbu Y: 1 + 1 spindle Unit gergaji alur tetap dalam arah X Kontrol: NC 1000 dengan perangkat lunak pemrograman NC HOPS Perangkat keselamatan: * Mat pijak di depan mesin * Pagar pelindung kanan dengan pintu akses Daya listrik: Kdjdjzdnykjpfx Aa Dsp 380 V, 50 Hz, 3 fasa Berat sekitar 3.500 kg Mesin tanpa alat potong dan adaptor

Kondisi: bekas, Tahun pembuatan: 2002, Dijual: Mesin CNC router / pusat pemrosesan Junget / Biesse Rover 24 L. Mesin ini dirancang untuk pemrosesan profesional panel mebel, elemen kayu, plastik, serta komponen produksi lainnya. Sangat cocok untuk pabrik pertukangan, perusahaan manufaktur mebel, produsen dapur, front, papan konstruksi, elemen PEHD, serta detail lain yang memerlukan penggilingan dan pengeboran presisi tinggi. Biesse Rover 24 L adalah pusat pemrosesan CNC yang kokoh, dilengkapi dengan meja vacuum, sistem pergantian alat otomatis, dan unit kepala bor. Mesin ini memungkinkan pelaksanaan operasi routing, pengeboran vertikal dan horizontal, serta pembuatan alur secara cepat dan berulang. Spesifikasi teknis: Model: Junget / Biesse Rover 24 L Tipe: CNC router / pusat pemrosesan CNC Dimensi mesin: sekitar 5,8 × 2,45 × 2,5 m Meja kerja: tipe vacuum Pergerakan sumbu X: 4500 mm Pergerakan sumbu Y: 1300 mm Pergerakan sumbu Z: 180 mm Pompa vacuum: 120 m³/jam Kontrol: NC1000 Sistem operasi: Windows XP Pergantian alat otomatis: ya Kepala bor vertikal: 7 unit Kepala bor horizontal: 8 unit Gergaji piringan: untuk pembuatan alur/cuts, misalnya pada panel depan atau elemen mebel Fitur keselamatan: safety grid / safety mat Alat yang terpasang pada mesin: termasuk dalam paket Aplikasi: Mesin ini sangat baik untuk produksi mebel, kabinet dapur, front, badan kabinet, panel dasar, dan elemen yang membutuhkan pengeboran serta penggilingan seri. Konfigurasi kepala bor memungkinkan pengeboran beberapa lubang sekaligus, mempercepat proses produksi dan menjamin konsistensi dimensi. Mesin ini sebelumnya digunakan terutama untuk pemrosesan PEHD1000, menunjukkan fleksibilitas dan kemampuannya menangani tidak hanya material berbasis kayu namun juga plastik teknik. Kondisi teknis: Mesin bekas pakai. Berdasarkan informasi dari pemilik sebelumnya, mesin ini berfungsi dengan baik, dapat dinyalakan, dan tidak diketahui ada kerusakan atau kekurangan. Dijual sebagai barang bekas, dapat diverifikasi oleh pembeli saat pengambilan. Kdjdpszf E E Hjfx Aa Dsp Keunggulan utama: * Konstruksi industri yang kokoh, * Area kerja luas, * Meja kerja vacuum, * Sistem pergantian alat otomatis, * Kepala bor vertikal dan horizontal, * Gergaji piringan untuk alur/cuts, * Dapat memproses panel, kayu, maupun plastik, * Sangat cocok untuk produksi mebel dan komponen seri. Mesin ini siap digunakan lebih lanjut di pabrik, bengkel kayu, atau perusahaan pemrosesan CNC.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, biesse-rover-303-cnc-bearbeitungszentrum Kdodpfx Aajza Edtj Dsp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jarak gerak sumbu Z: 200 mm, jumlah sumbu: 3, daya motor spindle: 9.000 W, kecepatan spindel (maks.): 24.000 rpm, en-001 Kodpfxjy Tycxe Aa Djdp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, lebar meja: 1.520 mm, panjang meja: 6.200 mm, jarak pergerakan sumbu X: 6.821 mm, jarak lintasan sumbu Y: 1.963 mm, jarak gerak sumbu Z: 663 mm, produsen pengendali: BIESSE, model controller: XP600 PC-based control with Windows XP WRT, daya motor spindle: 9.000 W, kecepatan spindel (maks.): 22.000 rpm, jumlah slot dalam magazin alat: 22, jumlah sumbu: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a 22-position tool changer. If you are looking for a high-quality CNC machining center, consider the BIESSE Rover C 9.65, which we offer for sale. Contact us for further details. • X-axis drive system: rack and pinion • Y-axis drive system: ball screw • Z-axis drive system: ball screw • Guidance system: linear guides with ball carriage blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5-axis interpolating machining unit • Spindle power S1: 8 kW at 12,000 rpm • Spindle power S6: 9 kW at 12,000 rpm • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis rotational speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolating) • B-axis rotational speed: 13.5 rpm • Z-axis feed rate: 30 m/min • Vacuum system: multi-zone vacuum with dual-side connections • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Work table: ATS system with modular pads • Number of work supports: 10 • Number of modules: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Uniclamp clamping force: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Boring unit: BH 42 L • Vertical boring spindles: 29 • Horizontal boring spindles: 6 (double power) • Slot saw diameter: 120 mm • Boring spindle speed: up to 6,000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool pitch: 180 mm • Max. tool diameter (full load): 175 mm • Max. tool diameter (single): 250 mm • Max. tool length: 268 mm • Max. tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max. pick-up tool weight: 8 kg Ksdsy Sgmuepfx Aa Dedp • Electrical connection: 380/400/415 V 50/60 Hz • Spindle inverter: up to 14 kW • Cooling system: liquid cooling for electrospindles (1600 W) • Lubrication system: automatic central lubrication • Safety system: CE-compliant with safety mats, guards and emergency stop • Chip removal: integrated chip conveyor In 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.170 mm, jarak lintasan sumbu Y: 1.395 mm, jarak gerak sumbu Z: 180 mm, diameter bor: 35 mm, kecepatan rotasi (maks.): 24.000 rpm, Submitting a bid obligates you to collect the item by the end of May! TECHNICAL DETAILS Travel X-axis: 6,170 mm Travel Y-axis: 1,395 mm Travel Z-axis: 180 mm Spindle Main spindle power: 7.5 kW to 12 kW Max. speed: 24,000 rpm Tool holder: HSK F63 Drilling Head Vertical spindles in X-direction: 10 Vertical spindles in Y-direction: 10 Horizontal spindles in X-direction: 6 Horizontal spindles in Y-direction: 2 Max. drilling diameter: 35 mm Useful length: 45 mm Max. projection: 60 mm Tool Change System Turret tool changer capacity: 18 tools Tool interface: ISO30 / HSK F63 Max. tool diameter: 200 mm Max. tool length: 160 mm Working length: approx. 7,300 mm MACHINE DETAILS Clamping and Vacuum System Vacuum pump capacity: 90 m³/h Uniclamp clamping unit workpiece thickness: 4,098 mm Electrical Connection: 400 V / 50 Hz / 3 phase Power: 22 kW Compressed Air Connection: 3/8" Operating pressure: 6 bar Consumption: approx. 400 NL/min Extraction Connection diameter: 250 mm Air requirement: 5,300 m³/h Air speed: 30 m/s Pressure loss: 1,500 Pa Kdjdpfx Aajy Iwuhj Dep Dimensions & Weight Dimensions (L x W): approx. 8,850 x 4,020 mm Machine weight: approx. 4,750 kg EQUIPMENT Portal design with moving processing unit 10 consoles with adjustable vacuum supports 30 adjustable support elements Multi-zone vacuum system Automatic central lubrication Chip conveyor Spindle air-blast unit Pneumatic prep system Safety equipment according to Directive 98/37/CE CNC control (Biesse system)

Kondisi: baik (bekas), Tahun pembuatan: 1997, MESIN 3-SUMBU UNTUK PENGEBORAN DAN PENGGURAAN BAGIAN PERABOT KORPUS, DENGAN PERGANTIAN OTOMATIS ALAT FRAIS Bidang kerja: 2.893 x 950 mm Tinggi benda kerja maks.: 65 mm Jumlah penyangga benda kerja: 6 Jumlah vakum suction cup per penyangga: 2 1 motor frais, 6,8 kW Ketinggian lewat antara permukaan penopang dudukan alat motor ke tepi atas vakum suction cup sekitar 250 mm 2 pengganti alat: 3 posisi bergerak dan 4 posisi samping Gergaji alur tetap pada sumbu X Jumlah spindle bor vertikal: 10 Jumlah spindle bor horizontal: X 2 + 2, Y 1+1 Pompa vakum 100 cbm/h Kontrol: NC 410 Perlindungan tikar pijak di depan mesin Kodpfx Aey Iaihea Djdp

Kondisi: sangat baik (bekas), Pusat kerja dengan unit pelapis tepi dalam kondisi sangat baik. Data teknis akan segera diperbarui. Kdedpfx Aajylcgpo Dep