Beli Fatosa Z Arm Mixer bekas (28.099)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) Redpfsfdkbhsx Aa Iew - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. Rjdpfeguk Dkjx Aa Isw According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Rjdsmidyfspfx Aa Isw Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. Rodeguk Dvjpfx Aa Iow The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times Rsdpfxomhh Dtj Aa Iow - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2002, Die von Hand gezeigten Teile sind nicht enthalten. Redpfx Aek It Utsa Isw

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: N2104796, GEM F470 AUTOMATIC CARTON SEALER WITH AUTOMATIC FLAP CLOSING FOR UNIFORM CARTON SIZES incl. centering unit and Siemens S7 PLC control Rsdsykugxspfx Aa Isw CARTON DIMENSIONS: - Length: min. 150 mm – max. 600 mm - Width: min. 100 mm – max. 520 mm - Height: min. 100 mm – max. 670 mm TECHNICAL DATA: - Siemens S7-1200 PLC control - Centering unit RCC500 infeed - Vertical drive and guide belts - Carton size adjustment manual - Sealing units for bottom and top - Standard version T22 / T23 - Tape width from 50 to 50 mm, depending on the unit used - Adjustable tension - Max. tape roll diameter 360 mm - Tape roll core diameter 76 mm - Power supply 400 V, 3-phase, N, PE – 50/60 Hz - Power consumption 0.25 kW - Protection rating IP54 - Operating temperature +5°C to max. +35°C - Conveyor speed 22 m/min - Average output 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm: 2,470 x 990 x 1,782 H - CE-compliant safety guard: Side sheet metal covers with access door, supplemented with infeed doors (L 850 mm), upper and lower covers. Image may show optional equipment subject to surcharge.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Data: Pusat Pemesinan Ibarmia tipe gantry (3 sumbu) XYZ: 3050 x 600 x 900 mm Putaran: 12.000 rpm Redpsywz H Hjfx Aa Iew Magazin: 60 slot, HSK 63 Tekanan tinggi: 60 bar Pengukuran alat Renishaw Probing Renishaw Sistem pendingin / filter sabuk Konveyor serpihan

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Comec RV516.ASM szelepújraforrasztó gép – új gép Alapfelszereltséggel és változtatható szelepszebesség szabályzóval felszerelve. Műszaki adatok: Szelep szár átmérő: 4-16 mm Szelep szár hossza: 55-230 mm Szelep tányér átmérő: 114 mm Homlok szögek: 0° - 60° Köszörűkorong fordulatszám: 2800 ford/perc Fő köszörűkorong átmérő: 215 mm Feszültség – Hz – fázisok: 400V/50Hz/3 fázis Fő méretek: Sz x H x M: 700 x 600 x 700 mm Tömeg: 142 kg Rjdpfjnbdlmjx Aa Iow Érdeklődés esetén, kérem vegye fel velem a kapcsolatot! További eladó gépeink: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Szelepcsiszoló, hengerfej- és blokk síkköszörű, szelepfészek-maró, nyomáspróba gép, alkatrész mosó gépek

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, de Rodjncd Ecepfx Aa Ijw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 20 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 90L1201, Polar Mohr Die Cutter DC-M – As-new die-cutting machine in top condition! Sale price: €69,000 (plus VAT) Ex works: 2325 Himberg near Vienna, Austria Condition: Barely used – almost as new Availability: Immediately available Description: For sale is a Polar Mohr Die Cutter DC-M in excellent condition – barely used and virtually as new. The machine is ideal for precise die-cutting of labels, tags, and packaging elements, and stands out for its high reliability and efficiency in daily production. The DC-M is renowned for its easy operation, compact design, and seamless integration into existing production processes – a genuine quality product "Made in Germany". Technical features: • Precise die-cutting quality with high productivity • Ideal for label production and small formats • Robust construction for long-term use • Compact footprint – perfect for smaller production facilities • User-friendly interface Redpfjwuq Afox Aa Ijw Viewing by appointment only. Sale is ex works (EXW) 2325 Himberg near Vienna, transport and loading available on request. 👉 Enquire now and secure a nearly new Polar Mohr DC-M at an attractive price!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, b6ae3940 Redpsylbqyjfx Aa Isw

Kondisi: baik (bekas), daya: 0,018 kW (0,02 hp), jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, berat keseluruhan: 15.000 kg, panjang meja: 2.600 mm, lebar meja: 850 mm, kecepatan spindel (maks.): 8.000 rpm, Perlengkapan: konveyor serpihan, FEATURES Table: 2600 x 850 mm X-axis travel: 2200 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Rsdpfor I Aumox Aa Iow Spindle speed: 8,000 RPM Control: Fagor 8055 - MC Motor power: 15/18.5 kW Tool magazine capacity: 40 Tool taper: BT 40 4th axis (IRTS rotary table): 350 mm diameter Electronic handwheel Coolant through spindle Chip conveyor Air cooling Dimensions with chip conveyor (W x L x H): 4029 x 7050 x 3100 mm Weight: 15,000 kg

Kondisi: sangat baik (bekas), 7541 Technical specifications: - Max diameter of main saw blade (without scoring blade): 400 mm - Max diameter of main saw blade (with scoring blade): 350 mm - Blade bore diameter: 30 mm - Max cutting height for 400 mm blade: 90°, 120 mm; 45°, 85 mm - Max cutting height for 350 mm blade: 90°, 95 mm; 45°, 67 mm - Main blade adjustable vertically and for angle Rjdpfxjzhv Abj Aa Isw - Saw blade guard - Including side sliding table - Cutting length on sliding table: 1700 mm - Cutting width on sliding table: 1400 mm - Cutting width at rip fence: 1350 mm - Main motor: 6 kW - Table dimensions: 1190 x 990 mm - With table extension: 1880 mm - With table elongation: 1890 mm - With scoring blade - Max diameter of scoring blade: 120 mm - Scoring spindle diameter: 20 mm - Scoring motor: 0.75 kW - 3 spindle speeds: 3500 / 4500 / 6000 rpm - Brake - Extraction port diameter: 80 / 120 mm - Dimensions (L x W x H): 3050 x 2200 x 1600 mm - Weight: 800 kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Saw blade guard – With scoring unit – With extension and widening – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (exchange rate: 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Kondisi: baru, Mesin yang telah direkondisi secara umum Harga: 6.000 EUR Mixer spiral Kapasitas: 75 kg tepung Kemper Redpfx Aex N Edtea Isw Kapasitas adonan: 120 kg Mangkok stainless steel Tegangan: 380V / 50Hz / 3 N/PE

Kondisi: hampir baru (bekas), Mesin telah direkondisi secara menyeluruh Harga: 4.500 EUR Mixer adonan Dengan pengaduk dayung Rjdsx N Efdspfx Aa Isw Kemper Mesin memiliki 2 kecepatan Mangkok dan pengaduk dari baja tahan karat Unit mobile dengan roda Timer otomatis Kapasitas: 50kg tepung Tegangan: 400V / 50Hz

Kondisi: hampir baru (bekas), Telah direkondisi secara menyeluruh Harga: 5.500 EUR Mixer adonan spiral Kapasitas: 100 kg tepung 160/180 kg adonan Redpfjx N Ed Tsx Aa Iew Diosna Volume wadah: 260 liter Daya listrik: 380V / 50Hz / 3N/PE Dua timer Dua kecepatan Opsi mundur Tutup setengah dengan saklar pengaman Roda dengan rem

Kondisi: baru, HARGA: 1900 EUR Mixer adonan spiral Kapasitas wadah: 60 liter Mixer spiral dirancang untuk penggunaan profesional di bidang roti dan katering. Digunakan untuk persiapan adonan utama, tetapi juga dapat digunakan untuk produk lain, menggantikan pekerjaan manual dengan sistem mekanis. Dengan cara ini, memungkinkan produksi adonan dalam jumlah besar secara berkelanjutan. Terdiri dari mangkuk bahan dan alat pengaduk (spiral). Dilengkapi panel kontrol digital dengan tampilan, dua motor listrik independen dengan dua kecepatan dan arah berlawanan yang menggerakkan wadah dan spiral, serta timer bawaan. Spesifikasi Mixer Spiral satu fasa Redpfxox U Efbj Aa Isw Kapasitas Bowl: 60 liter Daya Listrik: 3kW Ukuran Mesin: 840x480x1000mm

Kondisi: baru, Mesin yang telah direkondisi secara menyeluruh Harga: 5.000 EUR Rjdpfjx N Edmex Aa Iew Mixer spiral Kapasitas: 75 kg tepung Kemper Kapasitas adonan: 120 kg Mangkok stainless steel Tegangan: 380V / 50Hz / 3 N/PE

Kondisi: hampir baru (bekas), Mesin telah direkondisi secara menyeluruh Harga: 3.500 EUR Mixer adonan Pabrikan: Diosna Dilengkapi paddle Mangkok stainless steel Volume: 80 liter Redpox N Eguofx Aa Iew Dimensi: 75x70x100 cm Daya listrik: 2,5 kW Tegangan: 380V 50Hz

Kondisi: hampir baru (bekas), Mesin yang telah direkondisi secara menyeluruh Harga: 4.500 EUR Mixer adonan Dengan paddle Kemper Mesin memiliki 2 kecepatan Bowl dan mixer terbuat dari stainless steel Unit bergerak di atas roda Rodpfx Asx N Efqea Ijw Timer otomatis Kapasitas: 180 liter / 120 kg adonan atau 75 kg tepung

Kondisi: hampir baru (bekas), Mesin yang telah direkondisi secara umum Harga: 4.000 EUR Mixer adonan Produsen: Diosna Dengan paddle Mangkok stainless steel Volume: 180 liter Redsx N Egbspfx Aa Ijw Dimensi: 90x95x135 cm Daya listrik: 3,5 kW Tegangan: 380 V 50 Hz

Kondisi: sangat baik (bekas), Perangkat profesional untuk pengaturan dan pengukuran alat potong DMG Microset ECO 210. Mesin ini digunakan untuk pengukuran presisi panjang, diameter, serta geometri alat sebelum dipasang pada mesin CNC, sehingga secara signifikan mengurangi waktu penggantian alat dan meningkatkan akurasi pemesinan. Perangkat lengkap, dilengkapi dengan komputer kontrol, monitor, keyboard, mouse serta satu set adaptor ukur seperti terlihat pada foto. Spesifikasi teknis * Produsen: DMG Microset GmbH * Model: ECO 210 * Tahun produksi: 2008 * Daya listrik: 230 V * Daya maksimum: 650 VA * Negara produksi: Jerman Perlengkapan Rodpjzgcdijfx Aa Iew * Komputer kontrol * Monitor LCD * Keyboard dan mouse * Lemari alat dan aksesori * Adaptor SK50 / HSK63A * Adaptor SK50 / SK40 * Cincin HSK40 * Standar kalibrasi DMG Microset * Dokumentasi Microvision III (terlihat pada foto) Kondisi teknis * Bekas pakai * Berfungsi normal * Servis terakhir dilakukan oleh HAIMER (stiker servis terlihat pada perangkat) * Kondisi visual baik, terdapat tanda pemakaian normal Aplikasi * Pusat pemesinan CNC * Mesin frais CNC * Bengkel perkakas * Pemeliharaan mesin * Pabrik produksi dan pemrosesan logam presisi Penjualan mencakup persis seperti yang terlihat pada foto. Perangkat dapat diuji sebelum pembelian sesuai perjanjian jadwal.

Kondisi: sangat baik (bekas), pl-hu-001 Rjdexmt Eqopfx Aa Ijw