Beli Grup Pemangkas Ima Kanan bekas (5.848)

Kondisi: baik (bekas), IMA LED assembly aid Used, in working condition. Approx. 60 LEDs Hodpfx Aobxx Iuoa Isp 15-pin serial connector on both sides Dimensions: 18 x 56.7 x 312 mm (including 10 mm for the connectors) Direct purchase available in our online shop on our homepage.

Tahun pembuatan: 2001, Kondisi: baik (bekas), IMA gluing unit Spare part for e.g. IMA 680 / 480 / 980 Edge banding unit for 4-sided edging and all-round joint gluing, featuring: - Main pressure roller, diameter 100 mm, with pneumatically controlled secondary pressure roller, diameter 35 mm - Glue application for edge material coating, with temperature and level control - Servo drive for edge feed, with automatic adjustment to feed speed - Hot air post-activation unit, 7.5 kW, on the glue application side - IR emitter, 600 watts, on the decorative side for material forming with small radii - Pneumatically driven separating saw - Joint edge detection sensor - NC axis Rotation range up to 740 degrees; pneumatically operated Z-lift 125 mm - Separate NC axis for Y movement (for portal machines in X), operating independently of main axis Manufactured in 2001, removed from machine IMA 680 V No. 2216 Scope of delivery as shown in the picture Please check installation compatibility with your machine. No returns accepted. The unit was in production for approximately two years and is in good condition Hedjbxx Ikjpfx Aa Isp Technical specifications subject to change

Tahun pembuatan: 2007, jam operasional: 138 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 900K707385, Tablet Press PRESSIMA – As New, in Delivery Condition Fully functional machine with complete documentation and software. Includes multi-tip tooling set EU-D (5 × 4mm) (original price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, each in EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital display on the machine panel • Digital display of parameters set via handwheels • Note: no automatic control system present Technical Data • Speed: 10–75 rpm Hedpfsy Hl Aqsx Aa Iep • Main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Feeder shoe: dual-wheel, speed adjustable • Drive motor: frequency-controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total consumption: 1.5 kW • Machine housing and compression area: stainless steel • Compression area paint-free, easy access, hard-nickel-plated surfaces • Central connection for dust extraction • Central manual lubrication of punches via hand pump • Automatic lubricant pump for punches and slide rails • Feeder shoe motor integrated in head section Mechanical Features • Handwheels for tablet thickness, main compression, pre-compression, and fill adjustment • Rotary flap between feed tube and feeder shoe • Solid pre- and main compression stations • Scrapers on upper and lower punches • Brake magnets on lower punches • Standard 12 mm fill cam • Lower punch retraction after dosing • Lower slide rail and lifting cam easily removable • Machine status indicator on operator panel Measurement and Evaluation System • MS2300 for recording and analysis of up to 16 channels • Measurement/evaluation of: o Main upper compression o Main lower compression o Pre-compression upper o Ejection force o Scraper force o Upper and lower punch displacement • Signal amplifiers for main compression, pre-compression, ejection, and scraper force included Equipment / Features • Upper and lower punch shaft bores with 4.8 mm keyways for guided tooling • Chamber filling shoe • Hard-chromed turret • Main compression force measurement including display on operator terminal • Accessory set Type 8 MX: o 4 blind dies EU-B o 4 blind dies EU-D o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP Panel possible.

Kondisi: diremaj di bengkel (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in laths/strips (min/max) mm: 0.4 / 1 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open (Windows XP) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 7 - 35 Cam spacing (mm): 270 FORMAT PROCESSING (per side): - Spraying device (for liquid anti-adhesive) - Jointing milling unit - 08.379 (2 x 4 kW) EDGE PROCESSING (per side): Hjdpfx Aoyyya Dja Iop - Gluing unit (hot melt adhesive + premelter) VTG + 283.205 - Pressure zone (CNC controlled) + edge magazine for rolls (No. 6 fold) - End trimming unit 08.42/30/B (2 x 0.66 kW) Max 30 m/min - Milling unit 08.055 (1 x 2 kW) 0°-30° - Contour milling unit (for fine finishing) CNC controlled KFA 30 (1 x approx. 0.5 kW) 30 m/min - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Spraying units (for polishing fluid) - Buffing unit 08.617-2 (2 x 0.18 kW)

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Hoded Nt Rqspfx Aa Isp Working width (min/max) mm 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Kondisi: diremajakan ulang (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3.0 - 12.0 Panel thickness (min/max) mm 8 - 60 Control unit: ICOS Feed speed m/min: 16 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3.0 kW) Lamps to heat the lateral sides of workpieces Gluing station (Hot Melt Glue) 283.1513 Edge pressure zone Hodsdfgfpepfx Aa Iep Edge magazine for rolls (compartment No.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) - 30° Multi-functional unit (radius milling and contour milling unit) 08.346 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing liquid) Buffing unit 08.612 (2 x 0.25 kW) Free position

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Hedjdh Tfgspfx Aa Iop Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Veneer edging limited up to max. 1.0 mm Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC-controlled – panel insertion system 63.152 (mm 500 x 500) Jointing unit with CNC control 08.379 (4.0 kW x 2) – edge pressure zone (CNC controlled) Gluing unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (No. 1 + 6-fold) Pre-milling unit 08.055.0.1680 (1.85 kW x 1) End trimming unit 08.42/30/B (0.66 kW x 2) 20 + 30 m/min (0°–25°) Milling unit 08.0587 (1.0 kW x 2) multi-profile (1 + 3 profiles) Sprayer units (for slip agent) Contour milling unit (for fine milling) CNC-controlled KFA 20 (0.18 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-2 (0.18 kW x 2) Hjdpjxp E R Djfx Aa Isp Standard milling unit for grooving/rebating 08.190 (4.5 kW x 1) 90°/180°/270° (CNC controlled)

Kondisi: sangat baik (bekas), de_hu_001 Hjdpfxoxggthe Aa Iep

Kondisi: diremajakan ulang (bekas), Single-sided FORMAT PROCESSING and EDGE BANDING MACHINE (LEFT SIDE) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Edging thickness in battens/strips (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/software: IMATRONIC 121 /01 Feed speed (adjustable) m/min: 6 - 30 FORMAT PROCESSING: Jointing cutter unit with CN control 08.376 (2 x 4.5 kW) Spraying unit (for liquid anti-stick agent) EDGE BANDING SECTION: Lamps for heating workpiece edges Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for rolls (compartment No. 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0–25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°–30° + spraying unit (for sliding fluid) Hedpfx Aaocr T N Dj Iop Contour milling unit (for fine milling), CN-controlled 08.348 (2 x 0.66 kW) Multi-profile scraper unit (CN-controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edge WI (4 x 0.75 kW)

Kondisi: sangat baik (bekas), KOMPLETTE_DOPPELSEITIGE_FORMAT-UND_KANTENANLEIMMASCHINEN Hedpfxoxftt Ej Aa Iep

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats included. PC control system type ICOS OPEN CNC with IMAWOP software. Work tables configured as console tables (No. 8 consoles, table width 1400 mm). Console table with LED/strip lighting. Automatic tool change system (magazine capacity – 18 slots). Useful working area (X-Y-Z): 4000 x 2100 x 300 mm. Useful working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. 2 working areas. Vacuum pump / capacity: 140 m³/h. Chip conveyor. With separate electrical and control cabinet. Total connected load: 32 kW. Hodpfx Aaehu U Nxs Iep Working units (Upper): - No. 21 independent vertical drilling spindles (4 x 1.2 kW) - No. 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edgebanding unit, edge banding aggregate (hot melt glue) VT 100 - Edgebanding material (rolls), thickness (min/max): 0.4 / 3 mm - Edgeband magazine for rolls (No. 2 compartments) OPTIONS: - Saw unit, max diameter 200 mm - Combination unit (flush milling and profile scraper) - Drilling head (with No. 4 horizontal drilling spindles)

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a machine line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open (Windows-based) Without transfer rail (master & slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins Hedjum Untspfx Aa Iep "Hopper" (the panels fall directly onto the motorized chain conveyors) Cam interval (mm): 270 FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Protection cutter (pre-milling) 75.186 (1 x kW 4.4) Milling unit (2 x kW 6.6) Free position EDGE PROCESSING (for each side): Edgebanding unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 0.66) 30 m/min Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-2 (2 x kW 0.18) Free position

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edging material (thickness min/max) mm: 0.3 / 3 – Maximum edge thickness in laths/strips mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Safety and soundproof cabins Panel processing (for each side): - Pre-milling unit 75.186 (1 x 4.4 kW) - Multi-blade cutting unit (2 x 6.6 kW) Max. 35 m/min - Jointing cutter unit 75.186 (1 x 4.4 kW) Edgebanding section (for each side): - Gluing unit (PUR glue + pre-melter) VTG 3-24 + 283.203 - Pressure zone + edge magazine for rolls (compartment no. 24) - End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) - Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) - Multifunctional unit (radius milling + profile milling unit) MFA 08.342 (2 x 0.66 kW) SERVO Max. 20 m/min - OPTIONAL: KFA 30 - Profile scraping unit 08.519 - Flat scraping unit 08.521 - Spraying unit (for polishing fluid) - Buffing unit 08.604 (0.25 kW x 4) Hodpoxggzljfx Aa Iop - 2 x standard milling units for grooving/rebating (1 left + 1 right) 08.190 (4.5 kW x 2) 90°/180°/270°

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a processing line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transfer bar (Master & Slave systems) Safety and noise protection enclosure Retractable stops, spacing (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) Hjdpfxsfi Tkve Aa Iep EDGE BANDING SECTION (for each side): Gluing station (P.U.R. adhesive + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°–30° Multifunction unit (radius milling and contour trimming) MFA 08.342 (0.66 kW x 2) max. 25 m/min Contour milling unit (copier) 08.465 (0.18 kW x 4) max. 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free position

Kondisi: sangat baik (bekas), Double-sided edge banding and formatting machines – First (1st) machine in the line Edge thickness in rolls (min/max) mm Edge thickness in strips/bands (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (Master & Slave systems) Top pressure driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and formed edges (softforming) mm 1,050 Edge magazine for rolls (magazine slots) 6 Hsdjfi Tkgopfx Aa Ijp End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Flat scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in roll (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control system: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid release agent) Adjustable fence, CNC controlled Jointing milling unit with CNC-controlled pressure zone 08.379 (4.0 kW x 2) Glue application unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (compartments no.): 6 End trimming unit 08.42/30/B (0.2 kW x 2), max. 30 m/min (0°-25°) Milling unit 08.0587 (1.0 kW x 2), 4 profiles Multi-function unit (corner rounding and profile milling unit) KFA 20 (0.5 kW x 1), max. 25 m/min Profile scraper unit 08.516 (4 profiles) Hodpfsd Scydjx Aa Ijp Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (0.18 kW x 4) Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1) 90°/180°/270° CNC

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING MACHINE Hedpfed Rcigex Aa Isp Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 No transmission bar (Master & Slave systems) Top pressure with V-belt drive Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (KW 4.5 x2) Free slot Gluing unit (hot melt adhesive) 04.1570 Edge pressure zone Edge magazine for rolls (No. of compartments) 2 End trimming unit 08.42 (KW 0.66 x 2) 0°-25° Milling unit 08.055 (KW 1 x 2) 0°-30° Multi-function unit (radius milling and contour milling unit) 08.342 (KW 0.66 x 2) Profiling scraper unit 08.519 Flat scraper unit 08.50 Spraying unit (for polishing fluid) Buffing unit 08.612 Free slot (for groove / rebate unit)

Kondisi: bekas, Complete factory for furniture manufacturing, comprising: Hodpocr U Urefx Aa Iep SZ0M23) Angular panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Mod. GammaDue (3800x2200 mm) SZ0M26) Panel saw (multi-blade) "GABBIANI" (finished panels 4250 x 2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper / veneer / laminated SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper / veneer / laminated SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with second double-sided sizing and edge banding machine "STEFANI" and "TOMASSINI" handling. SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with "NARDELLO" Mod. Elegance splitter. SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining centre "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and rewinding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Honeycomb panel preparation line SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (mm??x mm ??). SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Various other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelving (wall racks), forklift trucks, pallet trucks, and more. The machines are still installed at the user and can be inspected by arrangement.

Kondisi: sangat baik (bekas), Zum Anleimen von Kanten an gerade, runde und profilierte Werkstücke - Manuelle Zuführung der Werkstücke - Mit Leimbecken und Leimauftragswalze - Mit Coil-/Rollenhaltertisch Hodpfehgbfaox Aa Isp - Min./Max. Werkstückdicke: 16 / 40 mm - Kantenbanddicke: 0,4 bis 3 mm - Schwenkbarer Tisch 0°-45° - Gesamtinstallierte Leistung ca. 4 kW

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Upper pressure: driven by V-belt Spraying unit (for liquid release agent) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (no. of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (2 x 0.66 kW) Hodeflc Uhspfx Aa Iop Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: seperti baru (mesin pameran), LEFT-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 - in strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser - max 44) Control ICOS Open Feed speed m/min (adjustable) 16 - 30 Pressure beam driven by V-belt Spraying unit (for liquid release agent) Adjustable fence, CNC-controlled Panel infeed system 700.101 (mm 500 x 500) Jointing unit with CNC-controlled 08.379 (kW 4.0 x 2) edge pressure zone (CNC-controlled) Gluing section (P.U.R. glue + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spraying unit (for separating liquid) Pressure zone + edge magazine for rolls (compartment No.) 6 Linear end trimming unit 08.428 LKA V30/2 (kW 0.2 x 2) speed up to 30 m/min (0°–25°) Hodogbug Nopfx Aa Ijp Multi-profile milling unit (CNC-controlled) 08.0587 (kW 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC-controlled KFA 20 (kW 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617-4 (kW 0.18 x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (kW 4.5 x 2) 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control unit: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Hsdpfxsfbmqte Aa Isp Maximum working area (X - Y - Z) for edgebanding (mm): 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - mm 1200 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity: 140 m3/h) Safety enclosure for the working head, safety foot mats Chip conveyor belt No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool stations No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit - edgebander (hot melt glue) VT 50 Edge magazine for rolls (compartment no. 6) OPTIONALS: No. 1 adapter unit for saw, fixed at 90 degrees, max. diameter 200 mm No. 1 adapter unit for flush trimming and profile scraping No. 1 adapter unit, horizontal drilling and milling head (cross head), 4 horizontal spindles

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Hedped Nuu Hefx Aa Isp Gluing station (hot melt adhesive) 283.1513 Edge pressure zone Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: sangat baik (bekas), Single-sided edge banding machine (left) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips / laths (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Pressure beam: V-belt driven Spraying unit (for liquid release agent) Adjustable fence (CNC controlled) Jointing unit with CNC control 08.378 (2 x 4.5 kW) Workpiece edge heating lamps Gluing unit (hot melt glue + pre-melter) 04.1570 Spraying unit (for separating fluid) Edge pressure zone Hodpfom Udfwox Aa Iop Edge magazine for rolls (compartment number): 16 End trimming unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying unit (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Form copy milling unit 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Smoothing unit 08.53