Beli Kellenberger Kel-Vision bekas (2.152)

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Iedpfx Ajvq R Uzjlnjtl Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: sangat baik (bekas), Mesin Gerinda Silinder Kellenberger 1000U dengan banyak aksesori dijual murah. Mesin ini dalam kondisi sangat baik dan berfungsi penuh. Dibeli dalam kondisi overhaul total pada tahun 2019. Harga sangat dikurangi! Iedpfxjwkt Euj Alnjtl

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1845/455, en-GB Itsdpfx Aljxt Ilfonjl

Kondisi: bekas, Tahun pembuatan: 2000, de-hu-01 Iodpfjy T E Rzox Alnjtl

Kondisi: baik (bekas), Tahun pembuatan: 2001, 10617 Itjdezc D Dkepfx Alnol

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Untuk dijual: Mesin universal dan pengasah perkakas presisi tinggi Strausak AG tipe 57U. Berkat desain serbaguna dengan meja silang, mesin ini sangat cocok untuk pembuatan perkakas, cetakan, dan jig. Mesin ini mampu melakukan pekerjaan penggerindaan yang menuntut pada benda kerja yang sangat dikeraskan (bahkan pada tingkat kekerasan 60–65 HRC) secara absolut andal. Kecepatan spindle dapat diatur secara fleksibel, dan lintasan maksimum sumbu X adalah 600 mm dengan jarak antara pusat 780 mm. Mesin dalam kondisi baik. Tipe Mesin: 57U Itodpfx Alev E Ivfonel Nomor Seri: 10686 Nomor Pesanan: 44137 Tegangan: 380 V Frekuensi: 50 Hz Spesifikasi Teknis Maks. lintasan meja / sumbu X: 600 mm Jarak antara pusat (panjang benda kerja maks.): 780 mm Tinggi pusat: 125 mm – 175 mm (tergantung pada blok peninggi) Maks. diameter penggerindaan: sekitar 348 mm Dimensi meja: 1.030 mm x 214 mm Rentang putar meja: ± 9° Berat mesin (netto): sekitar 2.500 kg (berat transportasi sekitar 2.700–2.800 kg) Dimensi mesin (P x L x T): sekitar 2,30 m x 1,50 m x 1,50 m Ruangan direkomendasikan (instalasi): minimal 3,50 m x 2,50 m Putaran spindle: variabel tanpa langkah / tingkatan sabuk dari 2.250 hingga 6.000 rpm Feeder meja: pengaturan tanpa langkah dari 0 hingga 16 mm/menit Apakah Anda membutuhkan mesin pengerjaan logam berkualitas tinggi namun terjangkau untuk produksi Anda? Atau ingin menjual mesin Anda? Untuk informasi lebih lanjut atau kontak, kunjungi situs web kami.

Kondisi: baik (bekas), Distance between centers: 760 mm Maximum Z-axis travel: 650 mm Maximum grinding length: 430 mm Maximum grinding diameter: 250 mm Center height: 125 mm Maximum wheel diameter: 500 mm Maximum X-axis travel: 320 mm Itjdpfov Tmtlex Alnel CNC brand: FANUC CNC model: 18TB Main motor power: 7.5 kW Z and X-axis resolution: 0.1 µm Workhead taper: MORSE 5 Workhead through-hole diameter: 38 mm Tailstock taper: MORSE 4 Workhead spindle speed: from 8 to 800 rpm Dimensions (L x W): 2500 x 2000 mm Weight: 4700 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.530 mm, jarak gerak sumbu Z: 750 mm, kecepatan spindel (maks.): 6.000 rpm, produsen pengendali: FANUC, jumlah slot dalam magazin alat: 30, jumlah sumbu: 3, Mesin frais portal 3 sumbu “Vision Wide Vision” ini diproduksi pada tahun 2016. Mesin ini memiliki jarak tempuh yang mengesankan, yaitu 2.000 mm pada sumbu X, 1.530 mm pada sumbu Y, dan 750 mm pada sumbu Z. Berkat dimensi meja yang luas, yaitu 2.000 × 1.530 mm, mesin ini sangat ideal untuk benda kerja yang besar dan datar. Jika Anda mencari kinerja frais berkualitas tinggi, pertimbangkan mesin frais portal “Vision Wide Vision” yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Itedpfxszqc A Tj Alnsl • Fitur Utama: • Mesin modern (tahun pembuatan 2016), dirancang untuk perawatan minimal dan integrasi mudah ke dalam lini produksi • Area kerja yang luas, cocok untuk benda kerja yang besar dan datar (pembuatan cetakan, industri kedirgantaraan, teknik mesin) Spesifikasi Teknis Ukuran Taper BT 50

Kondisi: bekas, Tahun pembuatan: 1997, de-to-hu-it-lt-lv-nb-nl-pl Iedpfx Aey R Ed Njlnotl

Kondisi: sangat baik (bekas), mit-Innenschleifvorrichtung Itjdpfx Asy H Dq Holnjl

Kondisi: siap digunakan (bekas), aussenrundschleifmaschine-kellenberger-angebot Itjdpfx Aexxzi Iolnel

Kondisi: bekas, Tahun pembuatan: 2026, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20-400 rpm Workpiece headstock swiveling 360° Grinding headstock swiveling 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Incremental infeed 0.001-0.030 mm/Ø Continuous infeed 0-0.95 mm/Ø Table swiveling ± 6° Longitudinal table travel 1750 mm Table speed 0.02-6 m/min Workpiece weight between centers 130 kg Max. workpiece weight – cantilevered 130 kg including chucking device Internal spindle mount 80 mm Total power requirement 6.5 kW Machine weight approx. 2.9 t Space requirement approx. 5.6 x 2.0 m Fully overhauled with upgrade to the latest technology. -New control cabinet -Modern hydraulic unit -Modern workpiece headstock Isdjy R Edvopfx Alnjtl -Modern tailstock with fine adjustment -Modern control block, infeed, gearbox -Internal grinding attachment for spindles with 80 mm diameter Swivel angle display for grinding headstock Grinding angle display for upper table Air lifting for upper table Tailstock with fine adjustment Sine bar Continuously variable grinding spindle speed 70-100% Continuously variable internal grinding spindle speed 70-100% Optional conversion to separate internal grinding spindle drive with cooling and adjustable internal grinding spindle speed 0-100% Splash guard doors on Z-axis Options: Swivel angle display for workpiece headstock Swivel angle display for grinding headstock Swivel angle display for upper table Partial enclosure in X as well as special requests

Kondisi: bekas, Technical details: Grinding length: 300 mm Centre height: 175 mm Swing diameter: 315 mm Clamping surface table (L x W): 1,800 x 200 mm Control: Heidenhain Maximum longitudinal adjustment of grinding unit on table: 1,100 mm Workpiece spindle speed: 3 steps / 1,500–2,200 rpm Infinitely variable feed: 0.001–1 mm Maximum travel X-axis: 300 mm Itedszaunzopfx Alnsl Machine weight approx.: 3.1 t Machine dimensions approx. (L x W x H): 2.9 x 1.6 x 1.4 m Swivelling during machining left and right Automatic table reversal Tailstock: MT3 taper Operation: hand control unit/foot switch Coolant: system with supply Measuring device: Heidenhain

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Itjdpfx Alew U Ry Njnsl Grinding Wheel Head Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. Newly painted. Workpiece Headstock Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of belts. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, and overhauled. Hydraulics Disassembly, motor inspection, replacement of hoses, defective and worn parts replaced. Hydraulic block inspected. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, tables ground. Z-Axis Disassembly, tables ground, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical Cabinet Comprehensive inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer’s protocol. Inspection and cleaning of various accessories Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal centres distance: 600 mm Maximum centres distance (with extended headstock): 750 mm Centre height, standard: 125 mm Centre height with interchangeable headstock/follow rest shoes: 175 – 250 mm Maximum workpiece diameter (at 125 mm centre height): 250 mm Maximum workpiece diameter with interchangeable shoes: 350 – 500 mm Table swivel range, each direction: 10° Maximum surface grinding length (max. width = 200 mm): 900 mm Table speed, stepless hydraulic adjustment: 0 – 6 m/min approx. Table reversal delay: 0 – 5 sec Grinding wheel for external grinding, diameter-width-bore: 400 x 50 x 127 mm Grinding wheel for surface grinding: 250 x 13 x 76 mm Grinding spindle speed: 1500/1700/2200/3600 rpm Grinding wheel head swivel range: 270° With index positions every: 90° Vertical movement of grinding wheel head, centre height: 125–350 mm Transversal travel of grinding wheel head: 285 mm Hydraulic rapid feed and retract travel: 40 mm Intermittent infeed of grinding wheel by table reversal: 0.001–0.03 mm/dia Continuous plunge grinding infeed: 0–0.9 mm/dia Micrometer stop for infeed, per increment: 0.001 mm/dia Workhead swivel range: 360° Workhead spindle speed, stepless variable, normal/special speed: 20–400 / 10–400 rpm Workhead / tailstock internal taper: Morse 5 / 3 Grinding wheel head motor, approx.: 4 HP All technical details provided without responsibility for errors or omissions.

Kondisi: diremaj di bengkel (bekas), KELLENBERGER UR 175 x 1500 adalah mesin gerinda silindris yang dirancang untuk presisi, akurasi tinggi, dan keandalan. Kapasitas kerja: tinggi tengah 175 mm, jarak tengah 1500 mm; diameter gerinda 340 mm, panjang gerinda 1500 mm; roda gerinda Ø400×50 mm, lubang 127 mm; kemiringan meja maks. 10°. Data teknis: kecepatan putaran roda gerinda 4 tingkat 1500–3600 putaran/menit, kepala gerinda dapat diputar 270°; spindel benda kerja tanpa tingkat 20–400 putaran/menit, dapat diputar 360°; kecepatan meja tanpa tingkat hingga 6 m/menit; motor spindel gerinda 4,0 CV; sambungan 50 Hz 3x380 V; berat ≈2200 kg; dimensi 3000×1750×1600 mm. Aksesori: kepala tetap dengan penyetelan halus, perlengkapan gerinda internal, kontrol pengukuran, alat penyearah, chuck magnet Ø230 mm, roda gerinda dengan flens, lampu, penopang. Memungkinkan toleransi yang ketat, cocok untuk aplikasi dengan presisi tinggi. Itodpfx Alezv I Ncjnsl

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV. Iodev Dxxzspfx Alnetl

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Iodev I Eq Sepfx Alnjtl Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, en-001 Iedpfsuhbx Tox Alnstl

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Isdeynmpgopfx Alnstl Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180 +/- ° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. fixture Internal spindle mount: 70 mm Total power requirement: 6.5 kW Iodpfjuxftxjx Alnotl Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your recently delivered machines with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways on the X-axis flat slide as well as standard air lift on the grinding headstock. - Digital readout on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not meet the basic health and safety requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Kondisi: siap digunakan (bekas), An older Kellenberger precision cylindrical grinding machine including accessories is available. Centre distance: 200 mm, centre height: 125 mm, maximum workpiece weight: 3 kg, maximum workpiece diameter: 245 mm, maximum workpiece length: 130 mm. On-site inspection is possible. Itsdpfx Aow Edpgjlnel

Kondisi: bekas, EN: Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0–40 mm / Ø Continuous feed: 0–40 mm / Ø Table swivelling range: ±6.5° Table longitudinal travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece max. weight (unsupported): 130 kg incl. clamping Maximum transverse movement: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, state-of-the-art and future-proof CNC control. Photo shows a machine already delivered with special options. - Operation via touchscreen panel is extremely user-friendly. - The icons on the control panel are practically identical to the original control, so no re-training is necessary. - Diagnostic function with display of PLC messages and digital I/O - Infeed dressing function can be extended or modified as per customer requirements. - Optional indexed spindle stop for the workpiece spindle available. - New maximum infeed travel: 40 mm (can be further increased on request). - Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment not possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories on request. Machine is equipped with an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal feed and rapid traverse. Highly versatile for external and internal cylindrical grinding, or for external, face and internal grinding of single parts in a single clamping. Itedeuxftrepfx Alnol Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - In-process measuring control Please note: At present, the machine does not comply with the essential safety and protection requirements as required under BetrSichV 2015 (German Ordinance on Industrial Safety and Health). An increase of the minimum required safety target must be determined through a risk assessment in accordance with BetrSichV.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, schleifmaschine-parameter-01 Ijdpfx Aoyb S Rcolnjtl

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control Itodpfsuxfupjx Alnol At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Itjdst Ii Nuspfx Alnel Swiveling grinding headstock: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: - Encoder with digital display on workpiece spindle headstock - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.