Beli Kraussmaffei Krauss Maffei Sr 500 Rechnerkarte Zu Mc3F / 5089300 bekas (19.203)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, berat injeksi: 1.464 g, tinggi total: 2.500 mm, berat keseluruhan: 25.500 kg, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, panjang produk (maks.): 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection moulding machine from Germany features a clamping force of 4,200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1,464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1,200 cycles/h, it is ideally suited for high-volume production. Contact us for more information about this machine. • Electrical Data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycle (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine colour: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm Lodpfsydnp Hox Anuohg • Force of moving platen (open/close): 124.7 / 102.4 kN • Platen dimensions: 1,270 × 1,200 mm • Mold opening stroke: 1,020 mm • Minimum mould height: 380 mm • Ejector stroke: 250 mm • Moving platen travel: 1,400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle aperture diameter: 6 mm • Injection pressure: 1,856 bar • Injection volume: 1,608 cm³ • Injection capacity: 478 cm³/s

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine Clamping force (kN): 6500 Distance between tie bars (h x v) (mm): 1110 x 960 Mold opening stroke (mm): 1450 Min. mold height (mm): 450 Max. mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (HPS-M mixing) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Control version: MC5 Screen language: German Condition: Tested, fully operational Features: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner Lodey Apdqjpfx Anushg - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend graphics - PV regulation - Production data interface consisting of 5 potential-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei LRX 350 Linear Robot: - Fully integrated control system - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Tie bar distance (H x V) [mm]: 1,570 x 1,270 Platen dimensions (H x V) [mm]: 2,210 x 1,910 Min./Max. mould height [mm]: 700–1,400 Max. daylight opening [mm]: 3,050 Max. ejector stroke [mm]: 350 Injection unit: Lhedoy Hqwyspfx Anusg Screw diameter [mm]: 105 Injection volume [cm³]: 5,195 Shot weight PS [g]: 4,728 Injection pressure [bar]: 2,296 Max. injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Pump motor rated power [kW]: 132 Screw drive motor rated power [kW]: 145 Heater capacity [kW]: 71 Dimensions and weight: Net weight incl. control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on the moving platen, 1 on the fixed platen) Pneumatics: 2 air valves (blow-off) + 1 valve for hot runner shut-off nozzle Hydraulic accumulator Cooling: 20 rotameter cooling circuits (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mould installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mould weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 ccm • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s Lsdpfx Anoyhby Heuohg • Plasticising throughput: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armoured injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Tool sensors: Priamus (p=2 / t=0)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 44.678 h, gaya penjepit: 2.500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Dimensions of clamping plate: 995 x 1050 mm • Minimum mould installation height: 330 mm • Distance between platen plates: 1,150 mm • Max. mould weight: 3,430 kg total (fixed side: 1,715 kg / moving side: 2,286 kg) • Core pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm Ledpeyhbq Eofx Anuohg • Injection pressure: 1,904 bar • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Armoured unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: LRX 150 linear robot with B/C axis combination (KM LRX 150 linear robot included) • Hot runner control: 12 zones • Cooling: 4 x HB 100

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: Screw diameter: 105 mm Shot weight in polystyrene: 4727 g/PS Clamping force: 2300 kN Platen size: 2830 x 2400 mm Opening stroke: 3700 mm Mould installation height: 1100-1800 mm Injection volume: 5195 cc Max. injection pressure: 2296 bar Dimensions: 14.2 x 4.15 x 2.84 m Total weight: 143 t Tie bar spacing: 2000 x 1600 mm Robot system, core pulls, hot runner controller -    The machine is in very good condition. -    Additionally, complete cutting units available. -    Includes a conveyor belt and robot systems (model year 2012). Lhjdpfxstrbcbe Anueg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 57.752 h, gaya penjepit: 13.000 kN, diameter sekrup: 105 mm, berat keseluruhan: 83.000 kg, Hydraulic injection moulding machine from 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It is equipped with a hydraulic-mechanical two-platen clamping system and a robust motor current of 261 A. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei 1300-12000 MC, which we are offering for sale. Contact us for further details. • International specification: 12000 MC / 1300 • Operating hours: 57,752 h • Mains voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Total motor current: 245 A • Motor circuit breaker: 315 A • Heater circuit breaker: 250 A • Main switch: 6-pole, heating and power separately switched • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil-cooled pump motor: IP54 • Housing cooling fan Control System and HMI • MC4 32-bit microprocessor control • TFT colour display • 3.5-inch floppy disk drive Clamping Unit • Hydraulic-mechanical two-platen clamping system • 4 pressure pads integrated into the moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety gate on operating side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mm Injection and Plasticising • PV-controlled injection unit • Thermoplastic plasticising unit, wear-resistant design • Screw diameter: 105 mm • Integrated check valve • Open nozzle design • Nozzle radius: 15 mm; nozzle bore diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticising possible • Plasticising unit: SP12000 • Maximum processing temperature: 450°C • Injection compression control adjustable via display • Injection stroke control • Hold pressure control • Injection speed control Hydraulics, Lubrication, Cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max. 31°C • Cooling water pressure: 4-6 bar Temperature Control • 8 temperature control zones for hot runners Ljdjyx Ez Rspfx Anujhg • Adaptive temperature controllers • Maximum controller power: 2 kW • Controller supply: 230 V Monitoring and Software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data saving for up to 20,000 cycles • Event log • Alarm history • Graphical process curves • Trend graphics for 12 parameters Interfaces and Connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • Interface for external temperature measuring device 20 mA • Central computer interface • PDA interface with 5 contacts • Volt-free contact for dosing unit

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, jam operasional: 35.000 h, Fungsionalitas: berfungsi sepenuhnya, Krauss-Maffei KM 1150/4300 MX Mesin Injeksi Horizontal dari Krauss-Maffei dengan gaya penutupan 1150 ton. Tahun pembuatan 2014. Jam kerja: 35.640. Kontrol MC6. Fitur tambahan: Robot ABB 6 sumbu, 24 zona Hot Runner, sekuensial 10 pneumatik + 10 hidrolik. Dapat diperlihatkan dalam produksi. Rincian Teknis Lhodpfsy Efkrex Anuog GAYA PENUTUPAN: 11500 kN JAM KERJA: 35.600 DIAMETER SEKRUP: 90 mm TEKANAN INJEKSI: 1839 BAR VOLUME INJEKSI: 2290 cm3 BERAT INJEKSI: 2084 gr LANGKAH PEMBUKAAN: 2000 mm DIMENSI PLATEN: 2210 x 1910 mm KETEBALAN CETAKAN MINIMUM: 600/1200 mm TAHUN PEMBUATAN: 2014

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jam operasional: 111.569 h, gaya penjepit: 10.000 kN, This 6-axis hydraulic injection moulding machine Krauss Maffei 1000-8000 M was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine has an injection pressure limit of 185 bar and a dosing stroke of approximately 465 mm. If you are looking for a high-quality injection moulding machine, consider the Krauss Maffei 1000-8000 M we are offering for sale. Contact us for further details. Lhodpfxeywlvre Anuog • Injection unit • Screw rotation speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection stroke: 200 mm forward movement actually used for shot injection • Dosing stroke: approx. 465 mm max. screw stroke during plasticising • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Clamping pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Sample values for cylinder heater capacities: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. -1 K to +2 K • Condition / maintenance-relevant data • Machine alignment tolerance:

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), diameter sekrup: 40 mm, Krauss Maffei 150-520 C2 ini diproduksi pada tahun 2002. Mesin ini memiliki diameter sekrup 40 mm dan dilengkapi dengan robot Sepro serta konveyor penyimpanan dari tahun 2014. Mesin dalam kondisi siap pakai, dengan 50.327 jam operasi pompa dan 36.908 jam operasi otomatis. Manfaatkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 150-520 C2 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Ledsx D Hxlopfx Anuohg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Lsdpfxoyv E Nve Anujhg Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Mesin injection Krauss Maffei KM 160–1000 CX 🔹 Informasi utama Produsen: Krauss Maffei Model: KM 160–1000 CX Tahun produksi: 2012 Jam kerja: 57.654 jam Kategori: Mesin injection hidrolik 🔧 Unit penutup Gaya penekanan: 1.600 kN (160 ton) Ukuran pelat: 820 × 845 mm Jarak antar kolom: 520 × 520 mm Tinggi minimum cetakan: 300 mm Maks. langkah pembukaan: 950 mm 💉 Unit injeksi Diameter screw: 50 mm Volume injeksi: 432 cm³ Berat injeksi: 393 g Lhsdoyv E E Djpfx Anusg Tekanan injeksi: 2.304 bar ⚡ Sistem elektro-hidrolik Daya motor pompa: 37 kW Daya elemen pemanas: 18,7 kW 👉 Dapat dipasang sistem penghemat energi (ESS) – penghematan energi nyata hingga 30–60% 📐 Dimensi & berat Berat mesin: 9 ton Dimensi (P × L × T): 5,54 × 2,06 × 2,18 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and a state-of-the-art MC6 control system. Plasticising Unit Complete plasticising unit dedicated to thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / return): 95 / 49 kN Injection Unit Ledpfoyugkwjx Anuohg Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw speed: 285 rpm Plasticising capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical and Hydraulic Equipment Rated pump motor power: 75 kW Installed heater capacity: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions and Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (length × width × height): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed according to the current demand during the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% - Servo drive technology for hydraulic pump - World-class quality and proven industrial technology - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of hydraulic components - Can be installed on existing hydraulic injection moulding machines

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Injection Moulding Machine KRAUSS MAFFEI KM 1100-12000 MX Basic Specifications Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: colour screen integrated with the operator console Interfaces: 3 USB ports Lhjdpfx Anjyugfzsusg The machine is equipped with a fully hydraulic clamping system and a complete plasticising unit for thermoplastics processing with abrasion protection. Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (horizontal × vertical): 2210 × 1910 mm Tie bar spacing (horizontal × vertical): 1550 × 1250 mm Mould opening stroke: 2000 mm Minimum mould height: 600 mm Maximum mould height: 1200 mm Platen stroke: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1758 bar Injection volume: 6786 cm³ Shot weight (PS): 6175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1118 cm³/s Injection rate (with accumulator): 1696 cm³/s Electrical and Hydraulic Equipment Rated pump motor power: 132 kW Installed heating power: 82 kW Number of barrel heating zones: 7 Dry cycle time (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2440 l Machine Dimensions and Weight Net weight (incl. control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to current demand throughout the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% - Hydraulic pump servo drive technology - Globally recognized, proven technology applied in plastics processing industry - Decreased energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system enables significant reduction of operating costs while maintaining full production performance parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en001 Lodpfx Ansyrrwkeujhg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Year of manufacture: 2011, Arm reach: 1717 mm, Ledotxymmepfx Anujhg Weight: 20 kg, Controller: DX100

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, diameter sekrup: 85 mm, Complete extrusion line. Individual components can also be offered upon request. The line has been used for the production of pipes made from PP filled with chalk and barium sulfate. Components: - 4-Component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws replaced in 2019) - Side feeder - Complete control system for dosing units and extruder - Single oil temperature control unit - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) - Battenfeld V250VA vacuum tank - Battenfeld K250 VA spray bath Lhodju Rda Ijpfx Anusg - Sica C250-4 haul-off unit - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table

Kondisi: bekas, CNC control, control cards, MC3 controller, plug-in cards, printed circuit boards, electronic housings - Manufacturer: Krauss Maffei, control module from injection molding machine - Electronic module: HU 100 5089750 3AO63 - Electronic housing: Phoenix Contact type UEGM - Quantity: 14 modules available - Dimensions: 90/25/H85 mm Lsdench Iiopfx Anushg - Weight: 0.1 kg/unit.

Tahun pembuatan: 1998, Kondisi: baik (bekas), Bagian dari lini ekstrusi langsung lama untuk pipa (yang juga masih tersedia). Lodpfxex S Rims Anuohg Mesin ini dilengkapi dengan komponen berikut: - Dosing Colortronic 4 Komponen (kontrol baru pada tahun 2017) - Berstorff KMC 85/2 (sekrup diperbarui tahun 2019) - Sidefeeder - Kontrol lengkap untuk dosing dan extruder - Tempering oli tunggal - Pompa leleh Maag

Kondisi: baik (bekas), Hydraulikpumpe-de Lhjdpsg Avqcsfx Anuog

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, KraussMaffei KM 320-2000 PA CN Injection Moulding Machine Year of manufacture: 2025 Machine equipped with a five-point, double toggle clamp system (three-plate design) with a servo-electric drive for the clamping unit. Injection unit fitted with servo-electric drives for injection, plasticizing, and unit movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing system Complete system for thermoplastics Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Lhedoyft Nzepfx Anusg Clamping force: 3,200 kN Mould opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar clearance (H × V): 820 × 770 mm Mould opening stroke: 650 mm Mould height (min.–max.): 300–700 mm Daylight: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Injection volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection rate: 616 cm³/s Screw rotation speed: 191 rpm Plasticizing capacity: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater power: 29.2 kW Number of heating zones (cylinder): 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight with control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in a modern servo-electric configuration, ensuring high precision, energy efficiency, and process repeatability.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar spacing (h x v): 900 x 800 mm Platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Max. daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Injection volume: 1608 cm³ Injection weight (PS): 1464 g Injection flow rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Lsdpfx Aneydbbvjuehg Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Dosing unit colourant control 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating capacity: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Kondisi: bekas, Tahun pembuatan: 2005, Injection moulding machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Ledpfxoxu Uvao Anuohg Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Movable platen stroke force: - opening: 105 kN - closing: 95 kN Mounting platen (H x V): 1,060 x 1,095 mm Clear width (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heater capacity: 30 kW Cylinder heating control zones: 6 Dry cycling rate: 1,550 1/h Oil filling: 720 l Dimensions and Weight: Net weight incl. control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Injection unit: Shot capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard/option: 285/349 rpm Screw shaft power standard or Stage 1: 95 PS Screw shaft power option or Stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT colour display and 3.5” floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 120 mm, lintasan ejektor: 300 mm, langkah pembukaan: 1.900 mm, DETAIL TEKNIS Gaya penutup: 9.500 kN Gaya buka: 665 kN Jarak antar pilar: 1.400 x 1.150 mm Pelat penjepit: 1.960 x 1.710 mm Stroke pembukaan: 1.900 mm Tinggi cetakan minimum: 500 mm Tinggi cetakan maksimum: 1.200 mm Lebar pembukaan maksimum: 2.400 mm Stroke ejector: 300 mm Sekrup berkapasitas tinggi HPS-UN, diameter: 120 mm Radius nosel: 30 mm Bukaan nosel: 12 mm Diameter sekrup: 120 mm Berat tembakan (HDPE): 5.420 g Volume tembakan: 7.634 cm³ Tekanan injeksi spesifik: 2.257 bar Ljdoy T H A Eepfx Anujhg DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 12.770 x 3.420 x 2.750 mm Berat mesin: 61,5 t