Beli Mesin Bor Kolom Oradea 6Gma1 bekas (78.315)

Kondisi: bekas, Tahun pembuatan: 2017, Kapasitas pengeboran pada baja (diameter) 40 mm Panjang lengan 285 mm Langkah pengeboran 160 mm Kecepatan spindel 150-2.000 putaran/menit Dudukan spindel MK4 Diameter kolom 115 mm Total kebutuhan daya 1,5/2,2 kW Berat mesin sekitar 275 kg Ruang yang dibutuhkan sekitar 1000x700x1900 mm Nwedpszpzdaefx Akasi

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter pemasangan: 10 mm, kecepatan spindel (min.): 6.000 rpm, kecepatan spindel (maks.): 12.000 rpm, panjang meja: 1.130 mm, lebar meja: 250 mm, pl-hu-001 Nwodpfx Aox Npimskasi

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland Njdpfxeq Ii Dls Akaewi TECHNICAL SPECIFICATIONS: - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Drilling head (face drilling): - Spindles: 4 - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Control system The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: baik (bekas), Alat dan mata bor akan dikirim tanpa lemari alat. Troli alat dengan dudukan alat akan disertakan. Nwedpjzd D N Iofx Akaei

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin bor untuk komponen yang diputar, TRIADE FR3 S Jumlah unit pengeboran: 3 1. Bagian bawah: 3 kW 2. Bagian atas: 1,5 kW 3. Bagian bawah: 1,1 kW (dapat digunakan untuk memasang mur/sekrup) Penjepit material pneumatik Nwedsznmlyjpfx Akaei Aplikasi: pengeboran kaki, komponen yang diputar, komponen rangka Berat: 1200 kg Dimensi: 115x128x180 cm (T)

Kondisi: baik (bekas), Tahun pembuatan: 2006, panjang pemakanan sumbu X: 1.650 mm, panjang umpan sumbu Y: 1.000 mm, Deep Hole Drilling Machine Imsa - MF 1200 BBL MACH-ID 9176 Manufacturer: Imsa Model: MF 1200 BBL Control: SELCA S4045 Year of manufacture: 2006 Nsdewyup Tspfx Akaewi Max. drilling diameter in steel: 5 - 40 mm X-axis travel: 1650 mm Y-axis travel: 1000 mm W-axis travel: 500 mm Table dimensions / L x W or Ø: 1200 x 1500 mm Spindle taper: SK40Mk Spindle speed: 4200 rpm Length: 6500 mm Width: 3800 mm Height: 3400 mm Weight: 6500 kg

Kondisi: bekas, Tahun pembuatan: 2000, Kondisi: Bekas Tahun Pembuatan: 2000 Nomor Gudang: 070165A Waktu Pengiriman: Segera, dengan catatan kemungkinan penjualan terlebih dahulu Negara Asal: Italia Harga: 19.800 € Tersedia di gudang: 1 unit Gaya Tekan: 40 ton Gaya tekan nominal pada 2,6 mm Panjang meja: 650 mm Lebar meja: 380 mm Lubang tengah pada meja: 120 mm Langkah: 8 - 78 mm Jumlah langkah: 145 1/min Panduan plunger: 6 Pengaturan plunger: 60 mm Lubang pin pada plunger: 40 mm Jangkauan: 195 mm Tinggi pemasangan: 297 mm Tinggi meja: 800 mm Motor: 3 kW Panjang: 1450 mm Lebar: 1150 mm Tinggi: 2150 mm Berat: 2200 kg Panel kontrol 2 tangan dan pedal kaki Nwodsyrhpvopfx Akasi Enklosur ruang kerja dengan sakelar pengaman Pelat penjepit Pelumasan terpusat Penghitung langkah Instruksi pengoperasian dengan pernyataan kesesuaian CE MEMBELI MESIN BEKAS ADALAH URUSAN KEPERCAYAAN - JANJI TRANSPARANSI KAMI Kami menawarkan keamanan maksimal dan transparansi penuh. • INFORMASI JELAS: Foto detail & video fungsi yang menunjukkan kondisi saat ini • PEMERIKSAAN LANGSUNG DI TEMPAT: Uji coba langsung di tempat kami • DEMO DIGITAL: Demo langsung individual melalui panggilan video • PEMBELIAN TANPA RISIKO: Hak pengembalian selama 14 hari Detail:

Kondisi: bekas, Mesin bekas Mesin bor lubang deret bekas merek Ganner tipe RB 107 No. mesin: 121627 Daya motor: 1,5 kW Kecepatan motor: 2800 rpm 1 balok bor dengan 26 spindel, jarak sumbu 32 mm 3 penahan benda kerja 1 saklar kaki Nedpfxow I Unwo Akajwi Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 1993, Mesin bekas Tahun pembuatan: 1993 Perlengkapan dan data teknis: Chuck bor 2-rahang hingga Ø tangkai 20 mm Penyesuaian posisi pneumatik pada 2 level 0-100 mm Nwedpfx Aow I Uy Tjkaei Kedalaman bor maksimum 150 mm Rel raster presisi 12 mm Kunci tengah dan penyesuaian melintang 2 silinder penjepit pengaman pneumatik Motor 1,5 kW Kecepatan 2800 rpm Perangkat bor lubang panjang dapat diturunkan dengan 2 cam program Berat mesin sekitar 310 kg Ukuran mesin (P x L x T) 1100 x 1100 x 1500 mm (tanpa penyangga) Ketersediaan: segera Lokasi: Röllbach

Kondisi: perlu perbaikan (bekas), Drilling capacity in steel / diameter: [mm] Throat depth: 1000 mm Workpiece height, max: [mm] - Max. throat depth: 1000 mm - Quill stroke: 250 mm Milling spindle / head: Nwedpfxjvmtlhj Akaei - Spindle speed range from: 47.5 rpm - Spindle speed range up to: 2120 rpm - Spindle diameter: 60 mm - Space requirement (left/right): 2000 mm - Space requirement (front/back): 750 mm - Overall height: 2160 mm - Total weight approx.: 2500 kg The machine is partially overhauled. - Vertical and cross adjustment have been renewed.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, X-axis travel: 6,000 mm Y-axis travel: 2,100 mm Z-axis travel: 1,500 mm Control system: HEIDENHAIN iTNC 530 Feed rate: 2–20 m/min Spindle speeds: 20–4,000 rpm Table dimensions (longitudinal): 7,000 mm Table dimensions (cross): 2,000 mm Total power requirement: 79 kW Machine weight approx.: 55 t Space requirements approx.: 15 x 7 x 4.6 m The SORALUCE FP6000 is in very good condition. Optional accessories: # Clamping angle plate: €5,000 # Clamping cube: €2,000 # Various tools & workbench: €2,000 Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal Milling Head: • Tool holder: ISO 50, DIN69871 AD Nwsdpfx Aevwgl Ajkaei • Automatic tool clamping: Clamping force 20,000 N • Indexing accuracy / repeatability: ± 3 sec. = ± 0.002 mm • Pull stud: DIN 69872 Form A • Number of swivel positions: 1 x 1° milling head (360 positions rear plane, 270 positions front plane) • Spindle bearing diameter: 90 mm • Sealing air: 0.7 bar Main drive: • Drive type: three-phase motor • Drive power: 32 kW at 100% duty cycle (S1) Spindle: • Spindle speed: 20–4,000 rpm • Full power available from: 340 rpm • Torque at 32 kW/S1: 910 Nm • Speed control: 2 infinitely variable ranges via star/delta switch Rapid traverse: max. 35,000 mm/min

Kondisi: baik (bekas), nagel-citoborma-290ab-paper-drill-de Nsdpezmu E Ejfx Akaewi

Kondisi: baik (bekas), Nagel Citoborma 480AB Mesin Bor Kertas Mesin ini dalam kondisi sangat baik. Memiliki empat kepala bor. Nsdezmu Erjpfx Akajwi Spesifikasi teknis: Jarak antar mata bor: 45-285 mm Diameter bor: 2-20 mm Tinggi tumpukan: 60 mm Berat: 275 kg Siklus pengeboran otomatis, dikendalikan dengan pedal kaki dan tombol manual. Konstruksi kokoh di atas pedestal. Meja bor dapat disetel di semua bidang. Ini adalah salah satu model Citoborma terbaru. Termasuk alat kerja, instruksi, serta stik pemotong dan mata bor baru.

Kondisi: baik (bekas), Nagel Citoborma 490 Mesin Bor Kertas Ini adalah mesin bor Citoborma terbesar yang saat ini diproduksi. Kondisi sangat baik, siap untuk produksi. Mesin dilengkapi dengan 4 kepala bor. Limbah hasil pengeboran dibuang ke dalam keranjang di bagian belakang mesin. Mesin dioperasikan menggunakan pedal kaki atau tombol dua tangan. Setiap kepala memiliki pengaturan naik/turun terpisah, sehingga dapat menggunakan mata bor dengan panjang berbeda. Paket termasuk mata bor cadangan, alat, dan buku manual. Spesifikasi teknis: Jumlah kepala bor: 4 (masing-masing kepala mudah dilepas) Tinggi tumpukan maksimum: 60 mm Ukuran mata bor: 2-10 mm Nwjdpfezmu Efsx Akaoi Jarak antar bor dapat diatur: 45 – 425 mm Dua kecepatan pengeboran Daya listrik: 380V Berat: 365 kg Dibuat di Jerman.

Kondisi: baru, Tahun pembuatan: 2023, New machine Nwodpelk R Epsfx Akaei Year of manufacture: 2023 Multi-spindle universal dowel boring machine with 3 numerically controlled axes (+/- 0.1 mm) with horizontal and vertical drilling capabilities electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen, memory for up to 1000 programs with parallel stops with numeric adjustment with 21 drilling spindles (10 left, 11 right) Spindle pitch: 32 mm Max. drilling distance: 640 mm Max. tool diameter: 40 mm Max. drilling depth: 65 mm Max. horizontal drilling height: 35 mm Working height: 860 mm Max. panel thickness: 60 mm Max. panel size: 900 x 3000 mm Motor: 1.5 kW – 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction nozzle: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short notice Location: Flörsheim

Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Mesin bor untuk komponen yang diputar TRIADE FIR-6 Nedpezmxf Aefx Akaswi Rusak, tidak ada pengontrol PLC.

Kondisi: bekas, Tahun pembuatan: 1988, Mesin bor radial Produsen: Tai Pin Tipe: TPR 1230 Tahun pembuatan: 1988 Kapasitas pengeboran pada baja: Ø 42 mm Kapasitas pengeboran pada besi cor: Ø 55 mm Pembuatan ulir (baja/besi cor): M25 / M38 Jangkauan (dari kolom hingga tengah spindel): 330 – 1.230 mm Langkah pergerakan kepala spindel: 880 mm Diameter kolom: 300 mm Pemasangan alat: MK 4 (Tirus Morse 4) Langkah pin (langkah spindel): 270 mm Kecepatan spindel: 12 tingkat, 37 – 1.253 RPM (pada 50 Hz) Pengumpanan otomatis: 3 tingkat (0,05 / 0,09 / 0,15 mm/putaran) Jarak spindel – pelat dasar: 467 – 1.360 mm Nwodpfx Asznvibekaji Penyesuaian ketinggian lengan: 620 mm 23726

Kondisi: bekas, Type BF 63 Spindle taper: 4MT Nedpswrpy Rofx Akaowi Spindle diameter: 63 mm Spindle speed: 8–1400 rpm Table size: 900 x 710 mm Drilling stroke: 560 mm Table load capacity: 2,000 kg Rotary table: 360 degrees

Kondisi: baik (bekas), Table size: 1100 x 1300 mm Travel range: 1300 x 1300 mm Nwjdpfxoh T T Aqo Akasi Spindle travel: 500 mm

Kondisi: baik (bekas), Manufacturer: MAS Type: VR 4 Outreach: 1000 mm without table! Nwedpfoh Eigbjx Akaji

Kondisi: baik (bekas), 12-head drilling machine for sale, Nwsdspy D Dwjpfx Akaoi Table size: 400 x 360 mm

Kondisi: baik (bekas), Outreach: 915 mm Spindle taper: MK 3 Length: 1700 mm Njdpfsd Ixy Isx Akajwi Width: 1,000 mm Height: 2000 mm Weight: 1000 kg

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) - Surcharge for machine bed length 1800 mm (working length 1800 mm) - Surcharge for: * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm Nwjdpfx Ajxwaz Hekaji - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K

Kondisi: bekas, Tahun pembuatan: 2024, MESIN PEMBOR LUBANG DOWEL GANNOMAT "DB 21400V, 3Ph, 50Hz / 1,5 kW, lengkap dalam desain standar dengan: - Kontrol elektronik otomatis penuh dengan operasi pulsa melalui katup kaki, menjepit-memb Nodpfx Akexnlflsaswi

Kondisi: bekas, Tahun pembuatan: 1997, gebrauchtmaschine-1997 Nwsdezn Ah Ropfx Akaoi