Beli Schimpke Dk34-V/So bekas (39.347)

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 7.593 h, kapasitas angkut: 4.500 kg, tinggi angkat: 3.180 mm, tipe tiang: dupleks, panjang garpu: 2.200 mm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Kapasitas angkut: 4.500 kg Ketinggian angkat: 3.180 mm Panjang garpu: 2.200 mm RINCIAN MESIN Jenis tiang: Duplex Jenis penggerak: Diesel Dimensi & Berat Dimensi (P x L x T): 5.600 x 1.500 x 2.400 mm Berat sendiri: 6.413 kg Sertifikat UVV berlaku hingga: 04/2027 Servis berikutnya jatuh tempo dalam: 564 jam Pjdpszz Hmksfx Aqvsgt Jam operasi: 7.593 jam PERLENGKAPAN Katup ke-3 dan ke-4 Tiang dengan pandangan yang jelas tanpa silinder hidrolik tengah Sebelumnya merupakan unit Still Full-Service Pengatur garpu hidrolik Penggeser samping Kabin tertutup Pemanas Wiper Ban putih, tidak meninggalkan bekas Lampu kerja LED di bagian depan Lampu kerja LED di bagian belakang Pencahayaan StVZO dengan lampu sein untuk penggunaan di jalan Kursi yang nyaman dengan penyangga lumbar Pemanas kursi Semua ukuran adalah nilai yang dibulatkan. Tidak ada jaminan untuk kesalahan penulisan dan pengukuran. Syarat pengambilan: Pemuatan samping hingga 6 ton dapat dilakukan dengan forklift besar di lokasi. Pemuatan dilakukan dengan risiko Anda sendiri. Pemuatan dari belakang melalui ramp pada ketinggian truk 100–150 cm, hingga 15 ton dan lebar hingga 230 cm dapat dilakukan. Pengambilan hanya dimungkinkan setelah menerima konfirmasi pembayaran melalui email. Pengambilan tanpa pemberitahuan sebelumnya dari hari Senin hingga Jumat antara pukul 07:00 dan 16:00. Jika pengambilan tidak dilakukan tepat waktu, akan dikenakan biaya penyimpanan sebesar 20 € per mesin per hari. Biaya penyimpanan yang belum dibayar harus dilunasi sepenuhnya sebelum pengambilan. Nomor lot: 32

Kondisi: baru, Tahun pembuatan: 2025, Holzbearbeitungsmaschinen Table Router Minimax twf55 es Item No.: 5502261 Robust steel and cast iron construction Anodized aluminum sliding table carriage Large-dimensioned milling unit made of cast iron, tiltable backwards up to -45° Four spindle speeds from 3,500 to 10,000 rpm Right/left rotation standard Height and tilt indication accurate to 1/10 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-relieved and annealed for long-term accuracy Powerful 5.0 kW industrial motor Curved milling guard included Made in Italy Dimensions and Weights Product length approx. 1200 mm Product width/depth approx. 2000 mm Net weight approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1200 mm Table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Installation Information Required floor space (length): 2800 mm Required floor space (width/depth): 2910 mm Floor space explanation: The dimensions consider maximum travel or working lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working Area Working area length: 1600 mm Working area width/depth: 2300 mm Working area explanation: Please add the given dimensions to the required floor space to obtain the recommended free installation area for the machine. Electrical Data Connection voltage: 400V Mains frequency: 50Hz Drive motor power: 5.0 kW Spindle Spindle tilt: 0 to -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle speed display: LED on machine front Spindle arbor diameter: 30 mm Maximum Milling Tool Diameters Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. profile milling diameter: 240 mm Max. tenoning diameter: 320 mm EQUIPMENT Equipment Aluminum sliding table carriage: ✔ Milling fence: Heavy-duty professional version with hold-down clamp, protective cover, and aluminum fence jaws Telescopic miter gauge: With two flip stops Extension table: ✔ Curved milling guard: ✔ Eccentric clamp: ✔ Handle on sliding table carriage: ✔ Spindle height adjustment: Manual Spindle tilt adjustment: Manual Pgsdpfx Aoi Dphtoqvet Control: Manual height and tilting adjustment of the milling unit Control element position: On machine body Location: Available from stock, 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, en-001 Pgjdpfx Aqjh Hnp Djvjt

Kondisi: bekas, jarak tempuh: 107.301 km, daya: 115 kW (156,36 hp), pendaftaran pertama: 03/2022, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis,

Tahun pembuatan: 2025, Kondisi: bekas, de-1 Pgsdpfxoyz Skde Aqvjt

Kondisi: bekas, jarak tempuh: 60.785 km, daya: 115 kW (156,36 hp), pendaftaran pertama: 03/2022, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis,

Kondisi: baik (bekas), Kontinuierlicher Heißluftofen, Proteinkocher. Wurde zur Zubereitung von Geflügelstücken, Burgern usw. verwendet. Guter Zustand und bis April 2024 in Produktion. Pjdpfsw Rn T Sex Aqvsgt

Tahun pembuatan: 2016, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 45129, Sistem Pembersih Cetakan Ultrasonik FISA 3 VST 1200/P-INSON+Z1, Tahun Pembuatan 2016 Produsen: FISA Ultraschall GmbH / FISA Manufacturing Srl Tipe: Spesial 3 VST 1200/P-INSON+Z1 Tahun Pembuatan: 2016 Nomor Seri: 45129 Dimensi Internal Tangki: sekitar 1.600 × 600 × 1.250 mm Berat Cetakan Maksimum: 2.200 kg Deskripsi Ditawarkan adalah sistem pembersih ultrasonik industri FISA untuk membersihkan dan merawat cetakan injeksi, cetakan die-cast, dan cetakan lainnya yang besar, serta komponen berat. Sistem ini terdiri dari tiga stasiun yang disusun berurutan untuk pembersihan ultrasonik, pembilasan dingin, serta pengeringan dan pelapisan pengawet. Desainnya diperuntukkan bagi benda kerja atau cetakan dengan berat hingga 2.200 kg. Podpfx Aqozx Eftovjgt Stasiun pembersihan VST 1200 dirancang sebagai versi INSON yang terisolasi suara. Dilengkapi dengan penutup lipat yang dioperasikan secara pneumatik, suplai air otomatis, sakelar pelampung pengaman, penyedot uap dengan kipas, dan pengatur waktu otomatis yang dapat disesuaikan. Pembangkitan ultrasonik dilakukan melalui dua generator FISA USM 28/R dan empat transduser MAGNASONIC FB 550 PLAN. Setelah stasiun pembersihan, terdapat stasiun pembilasan dingin VST 1200 dan stasiun pengeringan dan pelapisan pengawet VST 1200/P dengan opsi D. Stasiun pelapisan pengawet juga memiliki penutup lipat yang digerakkan secara pneumatik, penyedot uap, dan kaca pandang untuk kontrol cairan. Untuk meniup cetakan yang telah dibersihkan, terdapat stasiun tetes dan tiup di atas bak pelapisan pengawet dengan pintu samping, pelindung percikan, penyedot, dan selang fleksibel. Lingkup Pengiriman - Stasiun pembersihan VST 1200 - Stasiun pembilasan dingin VST 1200 - Stasiun pengeringan dan pelapisan pengawet VST 1200/P - dua generator ultrasonik USM 28/R - empat transduser MAGNASONIC FB 550 PLAN - penutup lipat yang digerakkan secara pneumatik - penyedot uap termasuk kipas - stasiun tetes dan tiup - baki penahan tetesan baja tahan karat di bawah seluruh sistem - dua batang penyangga cetakan khusus untuk total beban 2,2 ton - rak penurun VST 350 INOX dengan dua rak - indikator alarm optik - indikator sisa waktu - pengatur waktu mingguan - galeri dengan tangga dan pagar pengaman - lemari kontrol dan panel kontrol - dokumentasi teknis yang ada Data Teknis - dimensi internal yang dapat digunakan: sekitar 1.600 × 600 × 1.250 mm - beban benda kerja maksimum: 2.200 kg - jumlah stasiun proses: tiga - tingkat daya suara menurut protokol pengukuran: 78 dB(A) - desain: baja tahan karat - pernyataan kesesuaian CE tersedia - serah terima dan pelatihan awal pada tahun 2016 didokumentasikan - baki penahan tetesan: sekitar 6.500 × 1.800 mm - luas area pemasangan termasuk galeri dan area kontrol sesuai dengan gambar Kondisi Sistem industri bekas. Sistem ini ditampilkan dalam gambar dalam keadaan terpasang dan terhubung secara lengkap. Serah terima dan pelatihan yang berhasil didokumentasikan pada tahun 2016. Kondisi fungsi saat ini, kekedapan tangki, kinerja generator ultrasonik, serta fungsi pemanas, pompa, pneumatik, penyedot, dan kontrol harus diperiksa kembali sebelum penjualan atau selama inspeksi. Inspeksi dan pengujian fungsi dapat dilakukan setelah perjanjian. Penjualan dalam kondisi dan lingkup pengiriman yang ada sesuai dengan gambar dan dokumentasi. Pembongkaran, pemuatan, dan transportasi harus dikoordinasikan sebelumnya karena ukurannya dan beratnya.

Kondisi: baru, Tahun pembuatan: 2026, Weima single-shaft shredder type WL 6 Power: 18.5 kW Our Machine Concept WL 6 The high-performance Weima shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving enormous volume reduction of bulky materials. Functionality: The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. The hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feeding without the need for manual assistance. Technical Specification WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of rotor: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pcs Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Pjdjh Eiw Iepfx Aqvogt Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connected load: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta start - Rubber vibration dampers - V-rotor (patented) with profile-milled knife pockets - Gear end switch - Pressure strip - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second knife row Available from stock in 54634 Bitburg - Immediately available - Request more information

Kondisi: bekas, jarak tempuh: 247.000 km, daya: 279 kW (379,33 hp), pendaftaran pertama: 10/2004, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, bahan bakar: diesel, warna: lain, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, Tahun pembuatan: 2004, Perlengkapan: ABS, pengaturan jendela elektrik, spion elektrik,

Kondisi: bekas, konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 07/2015, panjang ruang muatan: 13.410 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.640 mm, panjang total: 14.040 mm, lebar total: 2.600 mm, tinggi total: 4.000 mm, suspensi: udara, ukuran ban: 385 / 55 / R22.5, jarak roda: 8.860 mm, warna: oranye, Tahun pembuatan: 2015, Perlengkapan: tail lift,

Kondisi: bekas, konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 07/2015, panjang total: 14.040 mm, lebar total: 2.600 mm, tinggi total: 4.000 mm, suspensi: udara, ukuran ban: 385 / 55 / R22.5, jarak roda: 8.860 mm, warna: oranye, Tahun pembuatan: 2015, Perlengkapan: tail lift,

Kondisi: baru, Tahun pembuatan: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material thickness: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Pgodpeu I R Utefx Aqvet Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers, suitable for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives for various types of materials such as MDF, multiplex, particle board, composites, and gypsum plasterboard. This type of gluing machine enables precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be appropriate for the type of production. The heavy-duty frame and core of the rollers, manufactured with greater wall thickness compared to earlier models, allow for high production throughput without any particular problems and enable bonding of materials up to 2,200 mm in width. Roller removal for maintenance is a simple process, as the supports can be separated into two halves using a simple bayonet coupling. The gluing machine can also be equipped with various optional features such as an electronic speed controller, automatic roller washing system, and automatic upper roller lift with position indicator on the display. The S4R/P glue machine is used for a variety of manufacturing applications, including in the construction sector and for the production of foam panels and mattresses. Equipment: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm. Disc rollers D: 122 mm, stainless steel Location: ex stock 54634 Bitburg - immediately available -

Kondisi: bekas, konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 07/2015, panjang ruang muatan: 13.400 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.640 mm, panjang total: 14.040 mm, lebar total: 2.600 mm, tinggi total: 4.000 mm, suspensi: udara, ukuran ban: 385 / 55 / R22.5, jarak roda: 8.860 mm, warna: oranye, Tahun pembuatan: 2015, Perlengkapan: tail lift,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: WEB62851313129613, jarak tempuh: 697.505 km, daya: 95 kW (129,16 hp), pendaftaran pertama: 05/2015, jenis bahan bakar: diesel, jumlah tempat duduk: 41, jumlah tempat berdiri: 53, tipe perpindahan gigi: otomatis, konfigurasi gandar: 4x2, berat kosong: 11.575 kg, berat muatan maksimum: 6.425 kg, berat keseluruhan: 18.000 kg, kelas emisi: Euro 6, warna: merah, rem: retarder, suspensi: udara, ukuran ban: 275/70 R 22.5, Tahun pembuatan: 2015, Perlengkapan: ABS, filter jelaga, kendali jelajah, komputer bawaan, lampu kabut, pemanas parkir, pendingin udara,

Kondisi: baru, Tahun pembuatan: 2024, The Uniq series forms the robust foundation of our product range and embodies all the characteristics that have established the Kündig edge sanding machine’s reputation in the market as a durable, versatile precision instrument. A key part of its extremely solid construction is the motor-driven oscillating sanding unit, which features a maximum oscillation range of 90 mm and can be tilted motorized by up to 45°. All standard edge processing tasks can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding unit, which boasts a range of intelligent features. Unlike conventional designs where the sanding belt oscillates by tilting the rollers, our entire sanding unit moves up and down. Both the oscillation stroke and range can be easily set at the push of a button. Thanks to flexible settings and the large oscillation travel, the abrasive belt can be optimally utilized across its full width, without the tedious need to adjust the working table height. The oscillation mechanism is powered by a separate motor. Pgsdpfofig Rwjx Aqvjt Tilting the sanding unit is also conveniently controlled via a rotary switch and a dedicated motor. The unit can be tilted between 90° and 45°. Thanks to the ingenious swivel mechanism, full oscillation is maintained at any angle, allowing double-sided sanding—even simultaneously. The different table heights at the front and rear sanding stations ensure the belt is not used at the same height at both stations. The combination of tilting mechanism and different table heights also keeps the gap between the sanding unit and the worktable to a minimum at any tilt angle. Changing the sanding belt is quick and simple, accomplished in just a few seconds. The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of workpieces and functions like a jointer planer. The infeed fence can be adjusted using a rotary knob for precise, tenth-of-a-millimeter removal. Importantly, the fence is never tilted— infeed fence, sanding pad, and outfeed fence always remain parallel to each other, preventing the rounding of workpieces. Fine adjustment of the sanding pad for grit compensation or zero setting between fences and pad is possible via a handwheel. The solid worktable on this side is equipped with sliding inserts. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Here as well, the entire sanding unit oscillates. The belt runs across the full width on a graphite cooling surface. The solid wood side is also equipped with a mitre fence. Included accessories: - Half-round table - Auxiliary table with sanding rollers Location: In stock at 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2025, Electrically adjustable thicknessing table with two speeds Numerical display for working height Thicknessing table made of cast iron The thicknessing table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Standard with noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical gearing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planer cutterblock Knife change in seconds When starting the machine, centrifugal force automatically tensions the planer knives – self-locking The knife projection is set automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains perfectly stable without locking Helical-toothed steel feed rollers ensure constant and uniform wood infeed Second, rubber-coated outfeed roller Robust anti-kickback devices prevent workpiece kickback A 4-knife cutterblock guarantees optimal planing results Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Extraction port diameter thicknesser 150 mm Drive power Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation The dimensions take into account maximum travel or working lengths. Psdpfoff Efasx Aqvogt Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area Add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknesser table Thicknessing table length 630 mm Thicknessing table width 1000 mm Working height min. 3.5 mm Working height max. 300 mm Working length min. 210 mm Max. cutting depth 8 mm Electrical data Connection voltage 400 V Phase(s) 3 ph Current type AC Network frequency 50 Hz Planer cutterblock Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 4500 rpm Max. planing width 630 mm Feed Speeds 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Dimensions and Weights Length approx.: 2,000 mm Width/Depth approx.: 1,110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1,034 mm Maximum Planing Depth: 5 mm Dust Extraction Connection Extraction Port Diameter, Thicknessing: 2 x 120 mm Thicknessing Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Planing Depth: 5 mm Electrical Data Main Motor Power: 5 kW Supply Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5,200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures exceptionally quiet operation. Helically serrated steel infeed rollers for consistent and even material feed. Material feed with two selectable speeds. Digital height display for thicknessing table. 2,000 mm long jointing tables for easy processing of large workpieces. Work tables made of cast iron, annealed and stress-relieved, making them resistant and permanently flat. Stable, large aluminium jointer fence with round bar guide (1,200 x 160 mm). Height adjustment for thicknessing table via handwheel with digital height display. The high machine weight guarantees maximum precision and smooth operation. Powerful industrial motor. Robust steel and cast iron construction. Equipment Details Jointer Fence - Stable, large aluminium jointer fence (1,200 x 160 mm) - With precise round bar guide Dust Extraction Hose Connection - Extraction ports for jointer and thicknesser face the same direction during both operations. - The extraction hose can thus be connected from the same side for both planing modes. No need for a hose going around the machine. Planer Head - Helically serrated steel infeed rollers for consistent, even material feed - Heavy-duty anti-kickback devices prevent kickback of large workpieces - 4-knife cutterblock for optimal planing results Chain Drive - Rugged chain drive concept - Drive wheels made of steel - Massive cast iron bearing block Two Feed Speeds - Standard with two feed speeds - Conveniently selectable from the operator’s side Material Feed - Helically serrated steel infeed rollers for consistent, even feed without indentations - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Thicknessing Table Adjustment - Adjustment via handwheel - Digital height display accurate to 0.1 mm Tersa Cutterhead - No adjustment or screwing required - Knife changes within seconds - Self-locking - Exceptionally quiet Podpfxshkz E Te Aqvjgt - Perfect planing results Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, panjang total: 6.060 mm, lebar total: 2.440 mm, tinggi total: 2.590 mm,

Kondisi: baru, berat muatan maksimum: 27.890 kg, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 13.530 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.730 mm, volume ruang muat: 92 m³, lebar total: 2.550 mm, tinggi total: 4.000 mm, Tahun pembuatan: 2026, Perlengkapan: ABS,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Fully equipped in standard version with: - Fully automatic electronic control system with program selector switch: RINSING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length monitoring with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) Psdpsdwi Rksfx Aqvegt - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with viscosity between 150 and 350 mPas - Stepless electronic glue quantity adjustment with potentiometer by time-preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the glue system, with EasyClean function button (automatic cleaning program for the glue hose and glue nozzle via spray funnel and wastewater collecting tank) - Control lamp for glue level indicator in the glue container - 1 stainless steel container for 5 kg of glue, as well as 1 stainless steel container for 5 l of water for flushing/cleaning - 4 wheels for moving the machine Including 1 gun for dowels Ø 8 mm, dowel length 25–40 mm Driving projection 7–20 mm Air connection: 6 bar Price ex stock 54634 Bitburg - available immediately -

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Vacuum membrane press VPR-3500 is a versatile press designed for woodworking and thermoforming applications. The VPR-3500 press is both tiltable and mobile. Possible applications: Veneering / form gluing / wrapping... Lamination of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Work surface equipped with vacuum channels ensures uniform negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity: 100 l Working area: 3500 x 1500 mm Motor power: 0.75 kW Vacuum pump capacity: 40 m³/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Pjdpfedvldajx Aqvogt Location: ex stock 54634 Bitburg - loaded, free of charge -

Kondisi: baru, Tahun pembuatan: 2024, Martin Dicken Planer T 45 with Tersa Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers smoothly planed surfaces, is fast and simple to operate, and runs extremely quietly. The standard electronic control makes setting the planing height effortless thanks to 99 storable planing dimensions, ensuring the very first workpiece fits perfectly. Of course, the thickness table is electrically adjustable at the push of a button, and can be fine adjusted in steps of 0.1 mm upwards. The feed speed controls are easy to reach and operate ergonomically. The heavy, vibration-damping composite frame combined with the high-quality planing head bearings guarantee outstanding surface results. Thanks to its soundproofed design, even the standard model operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Rotation speed: 5,000 rpm • Operation: Single-axis control for planing dimension, up to 99 values storable, 49 of which usable for a freely programmable planing sequence; pushbuttons for manual rapid and fine thickness adjustment with digital display, pushbutton for cutterhead start/stop, integrated hour meter • Cutterhead: TERSA solid steel cutterhead Z4, Ø 125 mm; including lock for easy knife change • Thickness table: Electrically adjustable with fine adjustment, table movement speed 10 mm/s, securely mounted on 4 supporting spindles, superbly planed table surface Pgsdpfx Aqoqlckpjvst • Feed system: 2 speeds, 6 / 12 m/min, selectable electrically even during planing; large 85 mm diameter rubber feed rollers for compensating varying wood thicknesses, gentle on materials and self-cleaning, easy roller exchange; segmented infeed pressure bar • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable left or right (optionally both sides in special cases); minimum extraction volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication bar for oil-lubricated points; bearing/cutterhead lubrication via nipples • Accessories: 1 grease gun pre-filled with long-term grease 1 oil can 1 open-end wrench 1 tool for knife changes 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emissions: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] No-load (without extraction) P1 65 No-load (with extraction) P1 77 Operation (without extraction) P2 65 Operation (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] No-load (without extraction) 84 Operation (with extraction) 90 Dust emission: low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Kombi 4-way HOLZKRAFT CU 410c F 26 N Tersa -- Technical Specifications -- - Circular Saw - Cutting length: 2,600 mm Max. saw blade Ø: 315 mm Max. cutting height at 90°/45°: 100 / 79 mm Max. crosscut width left of saw blade: 2,310 mm Rip capacity at rip fence: 900 mm Saw blade tilting: 90° - 45° - Jointer - Working width: 410 mm Jointer table length: 1,660 mm Cutterhead Ø / number of knives: 72 mm / 3 pcs. - Thicknesser - Table size: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Pgodpsd Dtc Tjfx Aqvet Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool Ø: 275 mm Max. tool Ø: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle Ø: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port Ø: 4 x 120 mm Extraction port Ø for saw blade guard: 60 mm - Special Offer Price - Location: Ex-stock 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm Pgodpfx Aqog U Uv Rjvet 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -