Beli Almig Gear 132 bekas (8.854)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, New speed-regulated ALMIG screw compressor LENTO 37 LK (air-cooled), oil-free, Control system: Aircontrol Premium Year: 2025 Features: - AIR CONTROL P controller Technical specifications Type: LENTO 37LK Possible operating overpressures of the unit (continuously adjustable): 5 to 10 bar Fsdpeh Unqaefx Ap Hepi Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 6.67 m³/min at 6 bar min/max: 1.40 / 6.41 m³/min at 7 bar min/max: 1.39 / 6.14 m³/min at 8 bar min/max: 1.38 / 5.86 m³/min at 9 bar min/max: 1.37 / 5.60 m³/min at 10 bar min/max: 1.35 / 5.34 m³/min at 11 bar min/max: 1.34 / 5.09 m³/min at 12 bar min/max: 1.33 / 4.85 m³/min Rated drive motor power: 37 kW Drive motor protection rating/class: IE3 Rated fan motor power: 3.0 kW Fan motor protection rating/class: IP 54 / H Operating voltage/frequency: 380 V / 41/148 Hz Residual oil content: 0 mg/m³ Sound pressure level (DIN 45635 T.13): at 50% load: 74 dB(A) at 100% load: 77 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 2,265 mm Weight: 1,650 kg Compressed air connection: G 1 1/2" inch Screw compressors of the oil-free LENTO series ensure maximum efficiency in compressed air preparation, thanks to precise adaptation of the volume flow to actual compressed air demand, low compressed air outlet temperatures, and minimized service and maintenance costs. The demand for high-quality, 100% oil-free compressed air is not only required in pharmaceuticals, food, electronics, and medical sectors but is used everywhere products of the highest quality are manufactured. Therefore, ALMiG’s oil-free LENTO series compressors deliver maximum compressed air quality for the most sensitive applications. Only water—the most natural of all resources—is used during the compression process. The result is: - clean, environmentally-friendly compressed air without oil; aspirated dust particles are washed out by the water - clean condensate – pure water – can be discharged directly into the sewage system - lowest temperatures during compression thanks to optimal heat dissipation via water, resulting in minimal energy consumption for compressed air generation

Tahun pembuatan: 2023, Kondisi: baru, nomor mesin/kendaraan: TR0042_ALM_RD56, ALMIG ALM-RD 56 COMPRESSED AIR DRYER Model: ALM-RD 56 including pre- and after-filter Delivery capacity: 0.88 m³/min* Fjdpfjgy Hbujx Ap Hopi Compressed air connection: 1/2" Dimensions (L x W x H): 372 x 369 x 707 mm Weight: 32 kg * Maximum compressed air flow rate, 35°C inlet temperature, 7 bar, 25°C ambient temperature, pressure dew point 5°C Visit our showroom. We always have a large selection of new and used compressors in stock! Immediately available.

Tahun pembuatan: 2016, jam operasional: 6.210 h, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: MA0084_S0040858, Used frequency-controlled screw compressor ALMIG FLEX 7 Year of manufacture: 2016 Operating hours: 6,210 h (Maintenance was performed at 6,210 h) Technical Data: Type: Flex 7 (Made in Germany) Possible system operating pressures (continuously adjustable): 5–13 bar Free air delivery at min/max speed, measured according to ISO 1217 Annex C: at 5 bar (g): 0.55 / 1.32 m³/min at 6 bar (g): 0.54 / 1.25 m³/min at 7 bar (g): 0.53 / 1.19 m³/min at 8 bar (g): 0.53 / 1.11 m³/min at 9 bar (g): 0.53 / 1.04 m³/min at 10 bar (g): 0.52 / 0.97 m³/min at 11 bar (g): 0.52 / 0.89 m³/min at 12 bar (g): 0.52 / 0.82 m³/min at 13 bar (g): 0.52 / 0.76 m³/min Total unit power consumption at min/max speed, measured according to ISO 1217 Annex C: at 5 bar (g): 3.89 / 8.11 kW at 6 bar (g): 4.26 / 8.30 kW at 7 bar (g): 4.63 / 8.53 kW at 8 bar (g): 5.01 / 8.63 kW at 9 bar (g): 5.38 / 8.73 kW at 10 bar (g): 5.75 / 8.79 kW at 11 bar (g): 6.12 / 8.82 kW at 12 bar (g): 6.50 / 8.81 kW at 13 bar (g): 6.87 / 8.77 kW Drive motor rated power: 7.5 kW Drive motor protection rating/class: IP55 / H Operating voltage / frequency: 400 / 50 / 3 V/Hz/Ph Fpedpfxjglz U Ds Ap Hsi Sound pressure level (DIN 45635 part 13): at 50% load: 57 dB(A) at 100% load: 58 dB(A) Compressed air connection: 3/4” G Dimensions: Length: 870 mm Width: 590 mm Height: 990 mm Weight: 165 kg On over 400 sqm we permanently stock a large selection of compressors from 0.5 to 55.0 kW! All machines are ready for operation (Plug & Play) and can be collected immediately. Visit our showroom in Erlangen.

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: TR0071_ALM-RD 325, Compressed Air Refrigeration Dryer ALMIG ALM-RD325 (available immediately!) Including pre- and after-filter Model: ALM-RD 325 Capacity: 5.08 m³/min* Reliable and energy-efficient air-cooled refrigeration dryer ALM-RD 325 Compact design requires minimal installation space Low operating costs Equipped with two integrated filters (pre-filter and microfilter) Energy-efficient refrigerant R134a State-of-the-art heat exchanger for maximum energy savings Max. operating pressure: 16 bar Max. inlet temperature: 60°C Min./max. ambient temperature: 5/50°C Voltage/Frequency: 230V/50Hz Compressed air connection: 1 1/2" Dimensions (L x W x H): 555 x 506 x 874 mm Weight: 83 kg * Maximum compressed air flow rate at 35°C inlet temperature, 7 bar, 25°C ambient temperature, pressure dew point 3°C Water in compressed air can cause significant damage to pneumatic tools, expensive machinery (CNC), or similar applications. Therefore, we recommend one of our cost-effective ALM-RD series compressed air dryers. Attractive leasing options for new machines available through our partner bank. Visit our showroom. Fedpfx Apshu Sb Re Hspi We always have a wide selection of new and used compressors in stock!

Tahun pembuatan: 2020, jam operasional: 14.099 h, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: S0055742, Used screw compressor ALMIG BELT XP 22 - 8 bar with Aircontrol Premium controller with integrated heat recovery for heating water Year of manufacture: 2020 Operating hours: 14,099 h Technical data Model: BELT XP 22 Operating overpressure: 8 bar (g) Free air delivery, according to ISO 1217 Annex C: 3.70 m³/min Protection type / Insulation class of drive motor: IP 55 / ISO F Rated power of drive motor: 22 kW Fpjdpfsix Aiyex Ap Hei Operating voltage / Frequency: 400/50 V/Hz Sound pressure level (DIN 45635 Part 13): 74 dB(A) Length: 1,250 mm Width: 880 mm Height: 1,515 mm Weight: 681 kg Compressed air connection: G 1" Visit our showroom in Erlangen. We always have a large selection of new and used compressors in stock. For new machines, we offer leasing through our house bank with a truly simple processing procedure.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Exhibition piece: Screw Compressor ALMIG BELT XP 8 – 10 bar (air-cooled) Year: 2022 / IMMEDIATELY AVAILABLE! MA0168 Technical Data Model: BELT XP 8 Operating Overpressure: 10 bar (g) Free Air Delivery, according to ISO 1217 Annex C: 0.99 m³/min Degree of Protection / Insulation Class Drive Motor: IP 55 / ISO F Drive Motor Rated Power: 7.5 kW Operating Voltage / Frequency: 400/50 V/Hz Fpsdpfx Apew Aanyo Hsi Sound Pressure Level (DIN 45635 Part 13): 63 dB(A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 275 kg Compressed Air Connection: G 3/4" Visit our showroom in Erlangen. We always have a large selection of new and used compressors in stock. For new machines, we offer leasing through our partner bank with a truly simple process.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, translation-001 Fsdpfx Aeyay Itsp Hjpi

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 7.637 h, berat keseluruhan: 1.970 kg, en-ALMiG Direct 75 Screw Compressor Fpedpsttucgefx Ap Hji The DIRECT 37 - 315 series is designed to be extremely economical in operation across all kW classes, thanks to its unique construction concept, allowing for highly versatile applications. These fixed-speed compressors are particularly suitable for use as base-load compressors. Separator system – maximum compressed air quality thanks to proven multi-stage separation Air Control P – the intelligence of the compressor; monitors, documents, and thinks ahead. With internet connectivity, communication options are virtually limitless. Drive system – highly efficient, reliable direct drive Compressor – high performance, excellent efficiency Cooling unit – large-surface coolers for lowest compressed air outlet temperatures and optimal coolant temperatures System fan – powerful, efficient, and high-performing Drive motor – robust, oversized drive motor for reserve capacity ALMiG Direct 75 Year of manufacture: 2010 Final pressure: 11 bar Motor power: 75 kW Free air delivery in accordance with ISO 1217 (Annex C-1996): 11.58 m³/min Length: 2300 mm Width: 1400 mm Height: 1860 mm Weight: 1,970 kg Operating hours: 7,637 h Load hours: 6,317 h Idle hours: 167,714 h Total air delivery: 4,506,000 m³ Financing through our partner bank is also possible. komplett-konzept.leasingo.de More ALMiG compressors, both new and used, can be found in our shop! International shipping costs upon request!

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 804, Kami menawarkan mesin gerinda roda gigi Sumitomo NPG-2×1000 bekas ini, tahun pembuatan 1996. Model: NPG-2×1000 Nomor seri: 804 Tahun pembuatan: 1996 Fedozgqzcspfx Ap Hopi Bulan pembuatan: bulan ke-7 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirim pesan atau menghubungi kami.

Kondisi: seperti baru (mesin pameran), Motor Listrik dengan Gir, SEW-EURODRIVE 0,55 kW, Mesin Bekas Produsen: SEW-EURODRIVE, Bruchsal, Jerman Tipe: S77 R37 DRS71M4BE1 Nomor Bagian: 01.1951560301.0001.14 Daya: 0,55 kW Kecepatan Motor: 1360 rpm Kecepatan Output: Sangat rendah, hanya 3,5 rpm! Torsi Maksimum: 1100 Nm Fedpjzk Aupofx Ap Hspi Frekuensi: 50 Hz Tegangan: 220–242 V Δ / 380–420 V Y Arus: 2,80 / 1,62 A Tambahan: Dilengkapi dengan rem pengaman yang dipasang di pabrik (BE1). Diameter Poros Output: 45 mm Dimensi Keseluruhan: Lebar: 740 mm Kedalaman: 390 mm Tinggi: 320 mm Berat: 70 kg

Kondisi: seperti baru (mesin pameran), SEW-EURODRIVE KAZ37 Motor Penggerak Gigi Heliks-Bevel dengan Rem – 3 kW, 319 RPM, Baru (2018), Mesin Bekas Produsen Fsdpfozka T Nox Ap Hepi SEW-EURODRIVE (Wina, Austria) Kode Lengkap Tipe KAZ37 DRS100M2BE2/TF/Z/LN Dimensi Keseluruhan Lebar: 640 mm Kedalaman: 200 mm Tinggi: 260 mm Spesifikasi Teknis Tahun Pembuatan: 2018 Daya Motor: 3 kW Kecepatan Motor: 2840 RPM Kecepatan Output Kotak Gigi: 319 RPM Rasio Gigi (i): 8,91 Torsi Output: 90 Nm Tegangan Operasi: 230/400 V (Δ/Y) – Tiga Fase Konsumsi Arus: 10,00 A (230 V) / 5,80 A (400 V) Rem Terintegrasi: Vbr 400 AC Torsi Rem: 7 Nm Kelas Efisiensi: IE1 (82,5% pada beban penuh) Berat Bersih: 47 kg

Kondisi: siap digunakan (bekas), Motor Dietz FDR 132 M/4q SN:3070557 dengan FD 71/25q, bekas, tanda pemakaian normal, 100% berfungsi, isi pengiriman sesuai foto. PERHATIAN: Biaya pengepakan dan pengiriman mohon ditanyakan secara terpisah! Fpodpji D Hpyofx Ap Hsi

Kondisi: sangat baik (bekas), Dijual pompa peristaltik Ponndorf PX 15 yang dilengkapi dengan motor-reduktor Lenze dengan pengaturan kecepatan yang halus. Pompa ini dirancang untuk pemompaan dan pendosisan cairan yang presisi, di mana medium hanya bersentuhan dengan selang kerja yang fleksibel. Solusi ini memastikan pemompaan yang aman untuk zat-zat korosif, zat-zat kental, dan zat-zat yang mengandung partikel padat. Unit ini dipasang pada alas baja yang kokoh dan dijual sebagai satu set lengkap dengan motor-reduktor. Kondisi visual sesuai dengan foto – terdapat tanda-tanda penggunaan normal. Data Teknis Produsen pompa: Ponndorf Handelsgesellschaft mbH Model: PX 15 Nomor seri: 3284 Jenis pompa: peristaltik (selang) Produsen motor-reduktor: Lenze Jenis transmisi: 11 712 02 10 Rasio transmisi: 10:1 Rentang kecepatan keluaran: 30–166 putaran/menit Torsi: 18–32 Nm Produsen motor: Hanning Elektro-Werke Daya motor: 0,37 kW Tegangan suplai: 220/380 V Frekuensi: 50 Hz Tingkat perlindungan: IP54 Negara produksi: Jerman (Jerman Barat) Aplikasi Pompa ini dirancang untuk pemompaan dan pendosisan: perekat, cat dan pernis, resin, bahan kimia, deterjen, sirup, lumpur dan endapan, susu kapur, suspensi, dan cairan yang mengandung partikel padat kecil. Fpjdszi Hc Ispfx Ap Hji Keunggulan Utama medium hanya bersentuhan dengan selang kerja, dapat beroperasi dalam keadaan kering, memiliki kemampuan penyedotan sendiri, pemompaan yang lembut tanpa merusak medium, pengaturan kinerja yang halus berkat penggerak Lenze, konstruksi yang kokoh yang dibuat di Jerman, mudah dioperasikan dan selang kerja mudah diganti.

Kondisi: bekas, Tahun pembuatan: 2006, tr-001 Fpjdpszkvvyjfx Ap Hei

Tahun pembuatan: 1991, Kondisi: baik (bekas), Nomor Referensi: 10656 Produsen: PFAUTER Tipe: PE 150 Tahun Pembuatan: 1991 Jenis Kontrol: CNC Sistem Kontrol: Sinumerik 840 Lokasi Penyimpanan: Halberstadt Negara Asal: Jerman Kecepatan Putaran: 150 - 600 RPM Pemasangan Alat: SK 40 Panjang Mesin: 4700 mm Lebar Mesin: 3600 mm Tinggi Mesin: 2800 mm Berat: 8 ton Diameter Benda Kerja: 150 mm Lebar Gigi Maks.: 150 - 200 mm Diameter Meja: 160 mm Lubang Meja: 63 mm Diameter Mata Bor Maks.: 130 mm Panjang Mata Bor Maks.: 220 mm Sudut Putar: +/- 45° Informasi Tambahan: - Mesin telah sepenuhnya dimodifikasi ke sistem Siemens 840D, yaitu motor dan panel kontrol. - Kepala frais telah direkondisi secara menyeluruh di Pfauter pada tahun 2013. - Sistem tegangan rendah dan sabuk majalah tersedia. Fedpfjzkpx Uox Ap Hopi - Dilengkapi dengan stasiun penghilangan burr. Mesin dapat diperiksa dalam kondisi menyala setelah koordinasi.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Kode Ferwood: RS0002955 - Kode Produsen: 4-070-01-2267 - Kondisi: Seperti baru (barang pameran) - Fungsionalitas: Berfungsi penuh - Mesin Kompatibel: - Jika berminat kami menawarkan layanan rekondisi, silakan hubungi kami. 9KG 46X39X27 Fsdpfx Aoymdvhjp Hspi

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RS0002834 - Kode Produsen: 10680775 - Kondisi: Bekas - Fungsi: Belum diuji - Mesin yang kompatibel: - Jika berminat, kami menawarkan layanan overhaul, silakan hubungi kami. 12KG - 46X39X27 Fedpfx Ajyb Sl Hep Hspi

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RU0010348 - Kode Produsen: JS-EV040 - Kondisi: Bekas - Fungsionalitas: Belum diuji - Mesin Kompatibel: - Jika berminat kami menawarkan layanan perbaikan, silakan hubungi kami. 10KG - 46X39X27 Fodpfx Apoycfhqo Hjpi

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RU0011862 - Kode Produsen: 4-070-01-0901 - Kondisi: Bekas - Fungsi: Belum diuji - Mesin yang kompatibel: - Jika berminat kami menawarkan layanan refurbish, silakan hubungi kami. 9KG 46X39X27 Fpedeylbccjpfx Ap Hoi

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood Code: RU0009426 - Manufacturer Code: - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Fpjdpfsv Hzvuex Ap Hoi

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RS0002835 - Kode Produsen: SF57DRE90L4/TF/Z - Kondisi: Bekas - Fungsionalitas: Belum diuji - Mesin yang Kompatibel: - Jika berminat, kami menawarkan layanan perbaikan, silakan hubungi kami. 42KG - 70X46X34 Fedpoyb Smqofx Ap Hjpi

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood code: RU0009347 - Manufacturer code: 31320008 - Condition: Used - Functionality: Not tested - If interested, we offer overhaul service, please contact us. Fpjdpfx Apsv Hrpfo Hei

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MT 5 Fpedjt Hww Dopfx Ap Hei Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special features: " Hydrostatic linear guide with separate hydraulic unit, " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1980, Rad diameter – max. 2500 mm Rad width 0 mm Fedpfot Hw Aaox Ap Hspi Module – max. 34 Module – min. 1 Total power requirement approx. 15 kW Machine weight approx. 15 t Required floor space approx. 4.20 x 2.00 x 2.90 m K L I N G E L N B E R G (Germany) Universal Involute and Helix Testing Machine Model PFSU 2500 Year approx. 1980 Serial No. B 2918 _____ Min/max. gear diameter: 250 - 2,500 mm Module range: 1 - 34 Maximum base circle diameter: 2,400 mm Measurable gear tooth length: 500 mm Stroke of measuring slide, approx.: 600 mm Helix angle: 0 - 45° Workpiece length between centers min./max.: 430 - 2,500 mm Workpiece diameter in counter bracket: 1,340 mm Workpiece table diameter: 690 mm Diagram magnification: 50/100/200/500/1000/2000 : 1 Max. permissible test weight of gear, approx.: 10,000 kg Total electrical load, approx.: 15 kW - 380 V - 50 Hz Weight of machine, approx.: 15,000 kg The machine is suitable for measuring the tooth profile and tooth flank traces on heavy-duty straight and helical spur gears. Accessories / Special Features: * Digital setting of base circle and digital angle settings, without use of base circle templates. * Length-adjustable support for dividing tester (test unit not included). * Capable of testing heavy workpieces. Motor-driven set-up, alignment, and testing process via push button. * Counter bracket can be swiveled back for loading heavy-duty gears and sprockets; other accessories included. Condition: This measuring machine must be reconditioned and retrofitted with a new CNC control system. However, the basic mechanics of the machine are sound, making it worthwhile for refurbishment. The machine cannot be demonstrated under power. Parts of the control panel are missing.

Kondisi: bekas, Tahun pembuatan: 1996, Workpiece diameter: 240 mm Center distance: 0 mm Max. honing length: 500 mm Max. module: 5 Total power requirement: 12 kW Machine weight approx.: 5,000 kg Space requirement approx.: [missing dimension] REISHAUER (Switzerland) CNC-controlled Gear Honing Machine Model: RZR, Year of manufacture: 1996 # 74 105 Wheel diameter min./max.: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30 ° Workpiece slide travel (Z-axis): 275 mm Honing tool traverse (X-axis): 128 mm X-axis infeed per stroke: 0.001 mm/stroke Crowning approx.: 0.5 ° Workpiece clamping length approx.: 500 mm Max. workpiece oscillation approx.: 3,000 mm Fpjdpfx Apot Hwvms Hoi Honing tool diameter outer/inner x width: 325/308 x 45 mm Honing tool speed: 100 - 1,200 rpm Dressing speed of honing tool: 30 - 1,000 rpm Spindle drive: 4 kW Total drive: approx. 12 kW - 400 V - 50 Hz Total weight approx.: 5,000 kg Accessories / Special Equipment SIEMENS CNC path control type 810 G allows input of all relevant gear data and the setup of the workpiece via conversational interface. With DNC interface RS 232 for data import and export. A-axis = swivel angle / Z-axis = table movement / X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment With integrated device for automatic threading of the honing wheel into the gear gap The tool swivel angle (A-axis) is also moved electronically, quickly, and accurately and hydraulically clamped, allowing for faster setup times. Hydraulic workpiece clamping via foot switch between workpiece spindle and tailstock; both units are movable on the workpiece table according to the workpiece. Fully enclosed working area with sliding doors and safety interlock High-end original REISHAUER honing oil filtration system Type RTO 40.10, with centrifuge and cooling unit for consistent honing oil temperature, oil mist filter, etc. Various diamond dressing tools mounted on arbors. Separate ventilated and cooled electrical and control cabinet, separate hydraulic unit.