Beli Cincinnati Milcron Mesin Cetak Injeksi bekas (78.426)

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Tersedia mesin cetak injeksi vertikal Arburg yang hampir baru dan dilengkapi penuh, berasal dari laboratorium, di mana unit plastifikasinya tidak pernah digunakan. Gaya penjepit: 500kN, gaya pembuka: 30kN, jarak pembukaan: 250mm, gaya ejektor: 30kN, langkah ejektor: 70mm, diameter sekrup: 25mm/30mm/35mm, gaya penekanan nozzle: 50kN, langkah mundur nozzle: 210mm, daya pemanas: 9kW, zona pemanas: 5, volume hopper granulat: 25l, tingkat teknologi: T2, diameter meja putar: 900mm. Dimensi mesin X/Y/Z: sekitar 3400mm/2050mm/3500mm, berat: sekitar 4200kg, jam operasi: 9201h, siklus mesin: sekitar 120k. Mesin hanya digunakan untuk material komposit seperti karbon dan kevlar. Dokumentasi tersedia. Inspeksi di lokasi memungkinkan. Gusdpfx Aaezd Ehxe Hog

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.200 kN, diameter sekrup: 92 mm, jarak antara tiang: 830 mm, volume langkah: 2.458 cm³, tekanan injeksi: 1.360 batang, berat injeksi: 2.262 g, tinggi cetakan (min.): 260 mm, gaya ejektor: 110 N, lintasan ejektor: 220 mm, lebar pelat: 1.165 mm, tinggi pelat: 1.145 mm, panjang total: 8.750 mm, lebar total: 2.200 mm, tinggi total: 2.200 mm, berat keseluruhan: 20.500 kg, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 248 A, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, Mesin dasar: UN420A5-3330 D=92 Gaya penguncian 420T Jarak antar tiang 830x810 Tinggi pemasangan cetakan 180 hingga 550 Antarmuka robot Euromap 67, Euromap 18 Gujdpfx Aszz Srroa Hjg Robot yang sesuai tersedia berdasarkan permintaan. Perlengkapan standar dasar: Standar CS Pengontrol KEBA 1175 Versi Inggris Sekrup dan unit silinder standar Penutup insulasi ramah lingkungan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection Unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosing volume: 168 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen dimensions: 600x600 mm Ejector: hydraulic Clamping system: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Main motor of the machine - Servo motor driven with inverter - Energy saving Built-in printer Machine has been regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 Gjdpfx Ajzy Imija Houg 5-axis robot: 3 axes driven by servo motors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, protective enclosure Purchase of the robot at extra cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Guodpfx Ajzy I Tpja Heg Injection pressure: 2500 bar Dosage volume: 792 cm³ Clamping Unit: Clamping force: 400 t Tie bar spacing: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, controlled by proportional valve x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on the vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mould height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in system for pressure quality control by Kistler – measurement of mould pressure Original Weber rotary table: very precise, driven electrically by a servomotor controlled by an inverter Rotary table diameter: 1200 mm Purchase of rotary table at extra cost Robot: Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servomotors: X, Y, Z (telescopic) Axis travel (approx.): X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Purchase of robot at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 8.00x2.32x4.21 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 399 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.200 kN, diameter sekrup: 48 mm, jarak antara tiang: 650 mm, volume langkah: 318 cm³, tekanan injeksi: 1.900 batang, tinggi cetakan (min.): 250 mm, gaya ejektor: 35.000 N, lintasan ejektor: 150 mm, langkah pembukaan: 550 mm, panjang pelat: 900 mm, lebar pelat: 900 mm, tinggi total: 2.800 mm, berat keseluruhan: 10.700 kg, Perlengkapan: dokumentasi / manual, FANUC ROBOSHOT Alpha S-220iA – mesin cetak injeksi listrik penuh, tahun pembuatan 2019 Mesin Fanuc lainnya dapat Anda temukan di situs web kami: www.maschinen-handel.eu Mesin cetak injeksi presisi listrik penuh yang hanya digunakan sedikit dengan 399 jam operasi. FANUC ROBOSHOT Alpha S-220iA menggabungkan akurasi pengulangan yang tinggi, gerakan dinamis, dan operasi produksi yang hemat energi. Cocok untuk komponen plastik teknis yang kompleks dan produksi serial yang dapat direproduksi. Data teknis: - Gaya penguncian: 2.200 kN (220 ton) - Mekanisme penguncian: tuas lutut ganda - Jarak tiang secara horizontal × vertikal: 650 × 650 mm - Ukuran pelat: 900 × 900 mm - Tinggi cetakan: 250–750 mm, versi diperluas - Langkah penguncian: 550 mm - Langkah pengeluaran: 150 mm - Gaya pengeluaran maksimum: 35 kN - Diameter sekrup: 48 mm - Volume langkah: 318 cm³ - Kecepatan injeksi maksimum: 200 mm/detik - Tekanan injeksi maksimum: 1.900 bar - Cincin pemusat: Ø 160 mm - Penggerak listrik penuh Pengendali dan peralatan: - Pengendali CNC FANUC 31i-B - Layar sentuh LCD 15 inci - Perlindungan cetakan AI dan perlindungan pengeluaran AI - Fungsi dosis dan profil tekanan yang presisi - Penyesuaian ketinggian cetakan otomatis - Pengukuran konsumsi energi - Antarmuka robot Euromap 67 Gujdpfx Aaoznd Dye Hjg - Tiga katup udara independen - Pengendali kaskade untuk hingga delapan katup - Output USB dan kartu memori - Pengukur aliran empat saluran - Fungsi cetakan dan pembersihan Mesin dalam kondisi seperti baru dan berfungsi penuh. Inspeksi dimungkinkan setelah perjanjian dibuat. Harga, waktu pengiriman, dan informasi lebih lanjut tersedia berdasarkan permintaan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Arburg 470C 1500-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection Unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping Unit: Clamping force: 150 t Tie bar distance: 470x470 mm Platen size: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Injection unit hardened - bimetallic Proportional valve on injection unit – precise injection Wittmann W711 robot Year of manufacture: 2007 4-axis robot: 3 axes driven by servomotors (electric); axis C Axis stroke: X-420, Y-1200, Z-2000 Touch control panel Robot safety package Robot with adapter Purchase of robot at additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4.44x1.63x2.09 m Gsdpfx Aajzy I H Aj Hsug Drive: Pump/motor: 18.5 kW Heating capacity: 9.7 kW Total power: 28.2 kW All machines offered are started and tested by our service technicians prior to sale. A video of the technical inspection of the selected machine can be provided or you can participate in a live technical demonstration at our facility in Łódź. Price: On request

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2003, REP rubber injection moulding press 25 tonnes Year: 2003 The four columns need to be replaced (repair cost: €9,000) Gusdpfxsizi H Hj Aa Heg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, 1 unit used two-component injection moulding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of manufacture: 2004 Guedpoyak A Iofx Aa Hjg Clamping force: 200 tons Tie bar spacing: tie-barless Min. installation height: 500 mm Opening stroke: 750 mm Screw diameter 1: 40 mm Max. shot volume: 251 cm³ Shot weight in PS: 216 g Screw diameter 2: 25 mm Max. shot volume: 69 cm³ Shot weight in PS: 60 g Control system: CC100 Technical features: - Engel robot, type: ERC23/1-E - 4 core pullers - Rotary table control

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping unit: Clamping force: 260 t Tie bar distance: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet 8x air valve on fixed platen side 2x hydraulic core pull on fixed platen side 2x hydraulic core pull on moving platen side 18x hot runner control circuits Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive – for energy savings Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B [rotation]) driven by servo motors (electric), axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel branded safety housing Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg L x W x H: 7.06 x 2.03 x 2.30 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical test of the selected machine or to participate in live technical tests at our facility in Łódź. Godozy Itiopfx Aa Heug Price: Upon request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2,007 bar Metering volume: 679 cc Clamping unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 interface Robot interface Air valve with vacuum monitoring x 1 Hydraulic core pull units x 3 Air core pull units x 3 Hot runner control x 10 Injection unit hardened – bimetallic Energy-efficient machine – equipped with a system with 3 variable-capacity hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Gjdpozy In Hsfx Aa Hsug Machine manufactured in December 2018, delivered to customer in 2019 Robot Krauss Maffei LRX Easy Control 100 Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt subject to surcharge Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 500 kN, tinggi cetakan (min.): 225 mm, gaya ejektor: 300 N, berat keseluruhan: 2.450 kg, tegangan masuk: 380 V, Perlengkapan: dokumentasi / manual, ARBURG 320 S dalam kondisi sangat baik, dengan jumlah jam kerja yang rendah, dan dilengkapi dengan pengering Piovan. Tahun pembuatan 1998. Pengering Piovan TDM604. Tahun pembuatan 2005. Termasuk dokumentasi. Mesin dalam keadaan menyala untuk keperluan inspeksi. Gjdpfx Ajzxg Amoa Heug

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, ENGEL DUO 7050/1100 Advanced Injection Moulding Machine Year of manufacture: 2006 Control system: ENGEL EC100 / CC100 (microprocessor-based) Key Technical Parameters Clamping force: 11,000 kN Godpsw U Tcmefx Aa Hsug Platen dimensions: 1,850 × 1,810 mm (width × height) Tie bar spacing: 1,400 × 1,150 mm (horizontal × vertical) Mould height: 400 – 1,200 mm Variant A: reduced minimum mould height to 400 mm (–200 mm) Maximum opening stroke: 1,800 mm Screw diameter: Ø105 mm L/D ratio: 22 (M3 barrel), optionally L/D = 24 (extended M3 barrel) Injection volume (max): 4,160 cm³ Shot weight (PS, max): 3,830 g Injection pressure (max): 2,090 bar Plasticising rate: 112 g/s (for PE-HD, L/D = 22) Injection nozzle: Herzog, needle shut-off, pneumatically actuated, type HP1.1, orifice Ø12 mm, M30×2 thread, adaptor for ENGEL; standard nozzle not included Injection Unit Two short-design injection cylinders Plasticising unit M3, bimetallic, corrosion and wear resistant, max. allowable temperature up to 350°C Screw S4V Ø105 mm, heat treated, nitrided, chrome plated, with hard-faced flight edges; non-return valve R9 2D mixing head Ø105 mm TMR mixer Ø105 mm Material hopper 300 l with magnetic grid Clamping Unit Hydro-mechanical, two-platen system Four short high-pressure cylinders on the nozzle side Four locking nuts on the ejector side Two rapid traverse cylinders (diagonally mounted) Special platen execution – ejector holes provided in both horizontal and vertical arrangements Mould cooling: 10-fold rotameters per plate (0–30 l/min), 20 circuits in total (10 per platen) Variant A: reduced minimum mould height to 400 mm, maximum daylight (2,400 mm) maintained and increased opening stroke

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Arburg 320C 500-170 e² / Hybrid Machine Year of manufacture: 2014 Injection unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Gedpezy Ifrjfx Aa Houg Dosage volume: 85 cc Clamping unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air valve x 2 Core pull control Hot runner controller x 8 Injection unit hardened - bimetallic Main motor of the machine - Servo motor with inverter drive – energy saving Proportional valve on injection unit – precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: bekas, Tahun pembuatan: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Shot weight: 402.2 g Injection pressure: 1714 bar Dosing volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x470 mm Platen size: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional features: Machine in very good technical condition Electric machine: energy-efficient and very quiet Operating hours: approx. 29,000 in automatic mode Total hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main motor – driven by a servomotor with inverter – energy-saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. Godpszy Ilfefx Aa Houg It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Wittmann Battenfeld EcoPower 110/350 / Electric machine / Operating hours: approx. 15,000 in automatic operation Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 168 ccm Guodpjzy Ilrsfx Aa Heg Clamping unit: Clamping force: 110 t Tie bar spacing: 470x420 mm Platen size: 682x682 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B8 - Touchscreen Additional equipment: Machine in very good technical condition All-electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Control system with hot runner channels Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91x1.42x2.10 m All machines offered are put into operation by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Battenfeld EcoPower SE 300/1330 / Electric Machine Year of manufacture: 2012 Injection Unit: Screw diameter: 50 mm Shot weight: 491.4 g Injection pressure: 2470 bar Dosage volume: 540 ccm Clamping Unit: Clamping force: 300 t Tie bar distance: 770x720 mm Platen size: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control system: UNILOG B6 – Touchscreen Additional Equipment: Electric machine: high-speed, energy-efficient, and very quiet Machine in very good technical condition Euromap 67 Robot interface Godpfxjzy Ii Rj Aa Hsug Air valves x8 Controller with hot runner circuits x6 Injection unit hardened – bimetallic Parallel movements It is possible to change the screw diameter to 45, 55, or 65 mm Dimensions: Weight: 14,100 kg Length/Width/Height: 7.20 x 2.04 x 2.20 m Drive: Pump/Motor: 0 kW Heating capacity: 22 kW Total installed power: 0 kW All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: baik (bekas), Tahun pembuatan: 1993, Netstal 1750/870 HP Gjdpjg U Arxefx Aa Hsug Closing force: 175 tons Year of manufacture: 1993

Kondisi: baik (bekas), Tahun pembuatan: 2002, We are selling this machine, available immediately. For further details, please refer to the images. Gusdpfx Aaozx D Hce Hog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Lini produksi dengan robot, meja putar, dan otomatisasi tambahan Tahun pembuatan: 2011 Unit penutup: Gaya penutupan: 6,25 ton Godpezy H Rgofx Aa Hsug Unit penutup: hidrolik Pengontrol: BABYPLAST - Layar sentuh Peralatan tambahan: Lini produksi dengan robot, meja putar, dan otomatisasi tambahan Mesin cetak injeksi vertikal Katup udara Injeksi untuk pemisahan cetakan Penyesuaian otomatis pengaturan unit injeksi (atas - bawah) Meja putar digerakkan oleh motor servo yang dikendalikan melalui inverter – sangat presisi Umpan otomatis komponen dengan sistem kendali mutu Perlindungan area kerja mesin dengan paket keselamatan Dimensi: Berat: 350 kg Panjang/Lebar/Tinggi: 0,70x1,00x1,65 m Semua mesin yang ditawarkan akan diuji coba oleh teknisi servis kami sebelum dijual. Dimungkinkan untuk mendapatkan video pengujian teknis mesin yang dipilih atau berpartisipasi dalam pengujian teknis langsung di perusahaan kami di Łódź.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Arburg 520H 1500-800 e² / hybrid machine / production line with Arburg Multilift H side-entry robot Year of manufacture: 04.2012 Injection unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1,650 bar Godpezy I Nkjfx Aa Hsug Dosing volume: 474 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen dimensions: 695x695 mm Ejector: electric Clamping system: toggle Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Control with air valve Core pull control Hot runner control x 12 Injection unit hardened – bimetal Main motor: Servo motor with inverter – energy saving Injection unit driven by servo motor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mould height adjustment Kistler sensor – mould pressure control The injection moulding machine was operated in a so-called "cleaning room", and is equipped with additional protective devices against contamination as well as two fume absorbers Arburg Multilift H side-entry robot Year of manufacture: 2012 5-axis robot: Z axis servo-driven (electric); X, Y, and B axes (rotation) pneumatic Safety package for robot Robot with adapter, conveyor belt with electric height adjustment, protective enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: bekas, Tahun pembuatan: 2005, Merek: KRAUSS MAFFEI, Tipe: 1600-8100-1400MX, Tahun Pembuatan: 2005, Nomor Seri: 61007140, Sistem Kontrol Krauss Maffei MC5, Gaya Penutupan 1.600 ton, 2 unit mesin injeksi, Tinggi pemasangan minimum/maksimum 700/1.600 mm, Jarak antar pelat 3.400 mm, Bukaan bersih horizontal/vertikal 1.850/1.400 mm, 12 kaskade, 48 saluran panas, Sistem inti hidrolik 5 (DS) 5 (AS), Diameter sekrup 105/60 mm, Berat injeksi 4.100/600 g, Robot pengambil, Pabrikan: Krauss Maffei, Sabuk konveyor, kira-kira 5.000 x 1.400 mm +++ Perhatian: Mesin ini adalah bagian dari lelang daring! +++ Gsdjzn Aqfspfx Aa Houg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Clamping force: 25 tons Version: with shuttle table Opening force/stroke min.-max.: 100/225 mm Mold height variable min.-max.: 122-222 mm Shuttle table stroke: 500 mm Max. weight on shuttle table: 120 kg Ejector force/stroke max.: 16/40 kN/mm Screw diameter: 22 mm Usable screw length L/D: 20 Max. screw stroke: 90 mm Shot volume: 34 cm³ Shot weight: 31 g Gusdpfx Aaovl Skao Hog Injection pressure: 2000 bar Operating hours: 7397 h

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, INJECTION MOULDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: - Clamping force: 1000 kN – ensures high process stability - Rotary table diameter: 1300 mm – optimizes the production cycle - Usable mould mounting area: 800 × 590 mm - Minimum mould height: 300 mm - Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable barrels): - Barrel Ø 30 mm: 83 cm³ at 2200 bar - Barrel Ø 40 mm: 140 cm³ at 1250 bar - Barrel Ø 20 mm: 36 cm³ at 2500 bar Additional Equipment: - 2 hydraulic core pulls – for operation of complex moulds - 2 pneumatic valves – for additional mould functions Gujdpfxjxzklqe Aa Hjg - GK control – monitoring of 3 heating zones directly from the machine - SELOGICA DIRECT control system – precise process control, custom sequence programming capability Year of manufacture: 08/2023 Pump operating hours: 1,062 h Detailed Description The machine is equipped with a hydraulic system featuring two energy-saving variable-delivery pumps and a servo valve enabling precise control of pressure and movements. The hydraulic power unit is mounted externally to the injection moulding machine, significantly reducing noise levels during operation. Thanks to precise filtration and a low oil volume, the oil change interval is extended up to 20,000 hours. T2 technology with servo regulation includes: - Two variable output, adjustable pumps - Programmable, adjustable and stabilized clamping force - Programmable and manual nozzle contact force adjustment - Capability for parallel movements (nozzle, ejector, cores) The machine also features: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption via smooth pump speed regulation according to machine load (for motors 15–75 kW, 380–480V, 50–60 Hz) Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating Hours: 20,499 h in Automatic Mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 ccm Clamping Unit: Clamping force: 220 t Tie bar distance: 570x570 mm Godpfozy I Rnsx Aa Heug Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA – touchscreen Additional equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull (needle type), controlled by proportional valve x 4 Hot runner control Hardened bi-metallic injection unit Proportional valve on injection unit – precise injection Machine with two accumulators / battery with compressed nitrogen (additional charge for fast operations) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm – 45 g/PS Screw diameter in side injection unit: ⌀25 mm – 45 g/PS Robot Wittmann W823 Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); axis C and A-movement Axis travel: X-550, Y-1400 (telescopic), Z-3500 Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra charge Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 370H 600-100 / Hybrid Machine Year of manufacture: 11.2011 Injection Unit: Screw diameter: 20 mm Shot weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping Unit: Clamping force: 60 t Tie bar distance: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 1 Control system with 12 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter - energy saving The injection unit is powered by a servo motor controlled by an inverter Machine equipped with a cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication system Dimensions: Weight: 3190 kg Length/Width/Height: 3.68x1.45x2.04 m All machines offered are started up by our service technicians before sale. Gusdszy If Sopfx Aa Hog It is possible to receive a video of the technical tests of the selected machine or to participate in technical live tests at our company site in Łódź. Price: Upon request