Beli Double Akhir Tenoner bekas (13.268)

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. Lredpfx Asxnlgcepton STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.813 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 07/2021, panjang total: 14.040 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2021, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.813 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 11/2020, panjang total: 14.040 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2020, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.927 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 11/2020, panjang total: 14.040 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2020, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: baru, Ungebräuchter Twin-Dolav-Washer, noch in seiner Schutzverpackung. Lrsdpfx Ajqxvwnoptsn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Mesin portal milling dan bor dengan portal bergerak (struktur gantry) Merek: FOREST-LINE ALBERT / Tipe: MODUMILL 300G / Tahun pembuatan: 1999 Modernisasi besar dilakukan pada tahun 2008 dan 2021! Mesin dilengkapi dengan kepala frais vertikal dan horizontal yang dapat diganti dengan indeksasi otomatis. Mesin dapat dilihat berdasarkan jadwal janji temu. Kondisi sangat terawat, perawatan rutin dilakukan! SPESIFIKASI TEKNIS: - Kontrol CNC: SINUMERIK 840D - Sumbu perjalanan X/Y/Z: 11.450 / 3.500 / 1.250 mm Penampang slider sumbu Z: 360 x 360 mm - Bukaan portal: 3.000 mm - Tinggi di bawah spindle vertikal: 1.400 mm - Lebar kerja yang dapat dijepit: 2.500 mm - Dimensi meja tetap: 5.000 x 2.500 mm - Sistem palet longitudinal Lredpfxozfbi Is Aptsn FASILITAS: - Penukar alat otomatis (magazin rantai): 80 slot - Pendinginan internal alat (IKZ) - 2 unit konveyor serpihan - Penutup portal - Probe pengukur, merek: RENISHAW - Handwheel elektronik - Diagnostik jarak jauh - Manajemen alat & manajemen aus - Tanda CE - Kebutuhan daya total: 130 kVA Dimensi keseluruhan mesin: 22,6 x 8,0 x 6,3 m Tanpa jaminan atas kelengkapan dan keakuratan data teknis dan perlengkapan. Penjualan sementara dapat terjadi. Lembar data teknis detail dan informasi fasilitas tersedia atas permintaan.

Kondisi: sangat baik (bekas), Gerinda duduk ganda dengan selang pendingin dan bak penampung air Diameter maksimum batu gerinda 200 mm Kecepatan 3.000 rpm Daya penggerak 0,55 kW Ledpjzfii Ajfx Aptjrn Tangki pendingin, pompa, dan selang tidak ada Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Jerman

Kondisi: bekas, Tahun pembuatan: 1950, de2hu-it-lt-lv-nb-nl-pl Lrjdpfjx Sr Evjx Aptjn

Kondisi: bekas, Tahun pembuatan: 1998, de-001 Lrsdpfxsxuv Udo Aptsn

Tahun pembuatan: 2022, Kondisi: baru, Angle: 0° - 90° Maximum cutting length: 1370 mm Lrjdpfxjzdzawe Apton

Kondisi: bekas, Type ICS/C 1.6-838-2x8/115 Model: Nord - West Spiral with 2 x 8 tiers Track width: approx. 830 mm Max. product height: approx. 150 mm Lrjdpfx Apszfga Sjton Capacity: approx. 1,000 kg/h at 90 min Siemens control system Dimensions (L x W x H): approx. 10,300 x 4,660 x 2,780 mm Belt washing and drying system Additional infeed and discharge conveyors Conveyor belt: 2-track Year of manufacture: 2011 3 x 400V, 50 Hz, 160A

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Double-table CNC machining center X-axis working range: 2,590 mm Y-axis working range: 2,260 mm Z-axis working range: 400 mm Number of milling spindles: 2 Spindle with liquid cooling Main motor power: 19.2 kW Max spindle speed: 24,000 rpm Aggregate heads 4th axis (C-axis) HSK-F63 tool holder system Central tool changer with 24 positions Tool changer on each head with 12 positions Vertical drilling heads: 20 (per head) Horizontal drilling units X: 8 Horizontal drilling units Y: 8 Grooving saw for X and Y direction 2 worktables Number of vacuum pumps: 4 x 360 m³/h T Jet chip blowing system Nesting functionality Manual labeling Barcode reader Tool length measurement Software: BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Ledpfouqw E Njx Aptsrn Weight: 17,900 kg

Kondisi: sangat baik (bekas), NOMOR KATALOG 7554 Data teknis: - Lebar rol : 1350 mm - Tinggi maksimum material : 70 mm - Aplikasi lem satu atau dua sisi - Model 2 rol - Diameter rol aplikasi lem atas/bawah: 160 mm - Motor utama: 0,75 kW - Dimensi (P/L/T): 2000 x 750 x 1550 mm - Berat: sekitar 534 kg Ljdpfxezc Nmws Aptjrn KEUNGGULAN – Buatan Jerman – Mesin coater lem bekas – Kondisi sangat baik Harga netto: 13.900 PLN Harga netto: 3.300 EUR (mengacu kurs 4,2 EUR) (Harga dapat berubah seiring fluktuasi yang lebih tinggi)

Kondisi: sangat baik (bekas), 6607 Ledpfx Ajzc I Tpeptsrn

Kondisi: baik (bekas), Tahun pembuatan: 2007, Dijual mesin edge bander dua sisi HOMAG KFL 526 dalam kondisi baik. Lrodpfszgr Absx Aptjn

Kondisi: sangat baik (bekas), k_6969 Lsdpfxozc Iv Ds Aptsrn

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Detail Teknis Diameter pelat muka: 2950 mm Diameter putaran: 3200 mm Tinggi pembubutan: 3500 mm Beban meja: 20 t Rentang feeding: 3000 mm/menit Motor penggerak utama: 70 kW Penggerak milling: 16,1 kW Kontrol: Lrjdpfxezdrc Ae Apton Kebutuhan daya total: kW Berat mesin sekitar: t Kebutuhan ruang sekitar: m Informasi tambahan * Kontrol CNC FAGOR 8070 * Sumbu C dengan 360.000 posisi * Kepala milling Mesin masih dapat dilihat dalam kondisi teraliri listrik di pabrik di Spanyol.

Kondisi: bekas, Tahun pembuatan: 1978, Zulässige Hubzahl in Relation zum Mat.-vorschub bei 300 mm = 40-60 Hübe 150 mm= 120 Hübe Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Type AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, ohne Grube). Blechband führt über die Abrollhaspel hinweg zum einseitigen Zangenvorschubapparat und dann in die Maschine. • HEILBRONN Coilabwickelgerät Type HAEMH 4000/500 S #204753 mit Coilablage- Platz, in welchem das Coil aufgegriffen und gespannt wird und dann wieder in Zurück in Position fährt, max. Coilgewicht 4000 kg, Coil-Ø max. 1500 mm, max. Bandbreite 500 mm, • angebauter Richtapparat für maximale Blechbreite 400 mm, die Blechführung ist In der Breite verstellbar, Blechstärke verstellbar 1-3 mm • automatische Öl-Umlaufschmierung mit Überwachung, Lrjdpfxjt Hwz No Aptjn • hydr. Überlastsicherung, motorische Stößelverstellung 125 mm • Förderband für die fertigen Pressteile, separater Schaltschrank -1990 modernisiert- Admissible number of strokes in relation to material feed: 300 mm = 40–60 strokes, 150 mm = 120 strokes. Accessories/Special Equipment: • FREI / WEINGARTEN straightening unit, type AMR 04 So, with subsequent overhead loop control (space-saving, no pit required). The strip runs over the decoiler to a single-sided gripper feed unit and then into the machine. • HEILBRONN coil unwinder, type HAEMH 4000/500 S #204753, with coil storage station, where the coil is picked up, clamped, and then moved back into position. Max. coil weight 4,000 kg; max. coil diameter 1,500 mm; max. strip width 500 mm. • Integrated straightening device for max. sheet width 400 mm, adjustable sheet guide width, thickness adjustable 1–3 mm • Automatic oil circulation lubrication with monitoring • Hydraulic overload protection, motorized ram adjustment 125 mm • Conveyor belt for finished pressed parts, separate control cabinet – modernized 1990.

Kondisi: bekas, Tahun pembuatan: 1985, Pressing force: 63 t Passage width: 1350 mm Stroke: 300 mm Total power requirement: 16 kW Machine weight approx.: 10 t Space requirement approx.: 2.0 x 1.8 x 3.4 m HYDRAP Hydraulic double-column press (embossing press with sliding table) Type: HPDb 63 Year of manufacture: 1985 Serial no.: H 40/5273 Pressing capacity of upper ram: 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Ram plate: 1200 x 500 mm Max. installation height (without tool changer): approx. 400 mm Stroke speeds up/down / full load: 400/400 or 16 mm/sec Clearance between uprights (front): 1350 mm Clearance between uprights (side): 350 mm Ejector in ram pressure/stroke: 1.2 t / 19 mm Pump drive: 11 kW Total drive approx. 16 kW - 380 V - 50 Hz Weight approx.: 10,000 kg Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ shuttle table) Accessories / Special equipment Stable double-column frame press with adjustable quadruple prism guides, equipped with: • Hydropneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces, which accommodate the pressed parts and the lower tool, position them under the ram, and after the pressing operation transport them to the rear onto a stacking device. The table then returns to the starting position. This system can be easily removed or modified. • CNC press controller (Siemens S5) with monitor for input of all relevant process data or for saving tooling data, allowing for easier and faster machine setup and for monitoring part transport. Shuttle table holder. • SICK light barriers fitted at the front press area/ loading station. • The ram is equipped with an electromechanical depth stop (300 mm stroke) and hydraulic tool clamping device, as well as integrated hydraulic ejector. • Displays for pressure and oil temperature, part counter, foot switch, two-hand release, central lubrication, hydraulic oil flow cooling, free-standing electrical cabinet, etc. The machine was used for pressing edge trims on cylinder head gaskets. Condition: Good to very good – demonstration ready, under power Delivery: Ex stock – as inspected Lsdpot Hwxuefx Aptern Payment: Net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1987, Pressure 125 t Upright distance 1050 mm Stroke 250 mm Total power requirement 40 kW Machine weight approx. 8.5 t Space requirement approx. m DUNKES CNC control system type CNC 1000, controlled drawing cushion, 4-fold prism guide, SICK light curtain, contact pressure gauge, Lredpst Hwuiefx Apten Cutting impact damping

Kondisi: bekas, Tahun pembuatan: 1969, Translation of technical listing for export platforms: Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: -- mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Required space approx.: -- m D I S K U S Vertical double-sided surface grinding machine in C-frame design with rotary workpiece feed system Model: DDS 600 CRA Year of manufacture: 1969 Serial No.: 6672 _____ Grinding wheel diameter x bore (each): 600 x 150 mm Grinding wheel width approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x width: approx. 60 x 120 mm Vertical quill adjustment (each): approx. 150 mm Hydraulic infeed impulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Feed rate for rotary device, steplessly adjustable: 14 – 145 mm/s Grinding wheel speed (each): (24 m/s) / 765 rpm Grinding spindle drive (each): 22 kW Total drive: approx. 50 kW / 380 V / 50 Hz Total weight: approx. 7,000 kg Accessories / Special Features • Rotary workpiece fixture for round transport discs with equipment slots for part placement and automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height, including (if needed) automatic hydraulic grinding wheel advance • Stepless speed regulation of rotary feed device dependent on grinding requirement and workpiece dimensions • Manual infeed of grinding wheels via push buttons • Hydraulically swiveling dressing device (RA) between the two wheels for simultaneous dressing of both grinding wheels, with appropriate compensation and automatic repositioning to effective workpiece thickness after dressing = significant time savings; can be activated manually or via timer • Ammeters for both grinding spindle drives • Central lubrication • Mechanical workpiece height control with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, large separate belt filter system, various grinding wheels, several transport wheels, etc. This machine is particularly suited to simultaneous, parallel-surface grinding of workpieces in large-scale production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Lrsdpot Hw N Hofx Aptjn Condition: good – ready for demonstration shortly Delivery: ex-stock, as inspected Payment: strictly net, after receipt of invoice.

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force: 3 t Reach: 0 mm Stroke: 200 mm Total power requirement: 15 kW Machine weight approx.: 4 t Space requirement approx.: m JENNY – Switzerland, automatic double-column straightening press Type RZ-205/3-600, Year of manufacture 1990, Serial no. 86 596 Upper ram pressing force 3 t Ram stroke approx. 200 mm Maximum installation height: 500 mm Maximum clamping length of workpiece: 600 mm Height of center above table approx.: 210 mm Ram speed up: 0.17 mm/sec Ram speed down: 0.02 – 0.17 mm/sec Pump drive: 15 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight approx.: 4,000 kg Lodpfx Apjt Hw Amjtern Accessories / Special equipment: Machine without automatic workpiece feed, the parts (shaft-shaped) are inserted manually, in front of the working area there is a Plexiglas sliding cover, manually operated Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but connection options for up to 7 measuring points. These are longitudinally adjustable on the lower press table over a range of approx. 500 mm, the straightening punch is adjustable on the upper ram in a prism guide 2 tailstocks adjustable on the press table up to a maximum clamping length of 600 mm, left side motor-driven with clamping quill, right side with indexing disc Workpiece rotation via stepper motor from 10 to 100 rpm 2 workpiece supports (prisms) left and right, for supporting the workpiece The workpiece is measured at predetermined points and straightened accordingly, the straightening process is monitored and controlled with the measuring device Straightening stroke control for preset ram stroke Left tailstock motorized Original JENNY cycle control (FMS) in separate control cabinet with monitor and keyboard, parameter input,

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force: 10 t Throat width: 500 mm Stroke: 200 mm Ljdpfxot Hwwdj Aptjrn Total power requirement: 10 kW Machine weight: approx. 4,500 kg Space requirement: approx. m M A E Automatic double-column straightening press with microprocessor control Model: ADS F 10 RH Year of construction: 1984 Serial No.: 5 002 84 00 Straightening force - Upper ram pressing capacity: 10 t Return force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Distance between table and ram (max.): 160 mm Workpiece clamping length, approx.: 600 mm Max. installation height: 600 mm Pump drive: 5.5 kW Total drive approx.: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special Features: • FEINPRÜF measuring and sequence control MILLITRON P 2070 with display screen for fully automatic straightening process: load workpiece, measure the “bend,” position the workpiece at “maximum bend at the top,” straightening process, control measurement (and if necessary re-straightening), eject workpiece. • Machine equipped with a short workpiece feed using a lift beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points for one workpiece; 2 workpiece supports on the left and right, as well as 1 pneumatically adjustable straightening anvil. • The straightening punches are individually pneumatically controlled. • Gripper for scrap parts that are no longer straightenable, mounted at the rear. Condition: good to very good – will be available for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Further straightening presses in stock – please contact us for details.

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force 500 t Clear width 750 mm Stroke 120 mm Total power requirement 57 kW Machine weight approx. 16 t Space requirement approx. ... m HYDRAP CNC press control and Siemens Simatic S5 control, continuously adjustable workpiece transport unit around the right column, table size 400 x 740 mm, max. installation height 200 mm Ljdst Hwpyopfx Aptern

Kondisi: sangat baik (bekas), NOMOR KATALOG 6024 DATA TEKNIS - Motor utama: 2,9 kW - Motor spindle: 0,75 kW - Motor penggerak meja: 0,75 kW - Daya listrik: 380V - Dimensi (P/L/T): 1600x1100x1200 mm - Berat: 891 kg Mesin dilengkapi dengan: – 2 meja berukuran 300x340 mm – Penjepit pneumatis – Meja dapat diatur sudutnya pada dua bidang – Di meja dapat dibuat pasak memanjang dan bulat – Kecepatan meja dan putaran spindle diatur secara mekanis – Ketinggian meja dapat diatur naik/turun – Pengaturan lebar pasak Harga netto: 16.900 PLN Harga netto: 4.020 EUR Harga netto dihitung berdasarkan kurs 4,2 PLN/EUR (jika terjadi fluktuasi kurs yang signifikan harga dapat berubah) Ljdezcu U Tepfx Aptorn