Beli Fusei Fmtm250-7Hs-32P bekas (392)

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 1993, nomor mesin/kendaraan: 208712, Fungsionalitas: tidak berfungsi, gaya penekanan: 150 t, panjang meja: 3.550 mm, kapasitas tangki oli: 390 l, EHT EHPS 15-35 Press Brake 150 t | 3,550 mm | Year of manufacture: 1993 | Cybelec DNC 880 | incl. Tool package For sale is a robust hydraulic EHT press brake, model EHPS 15-35 from the year 1993. The press brake features a working length of 3,550 mm and a pressing force of 1,500 kN, which corresponds to approx. 150 t. It is equipped with a Cybelec DNC 880 controller. The scope of delivery includes a comprehensive package of upper and lower tools as well as special tooling. Important note on current condition: The machine can be started. However, an error occurs during the initialization of the back gauges, so it is currently not possible to bend. The fault must either be bypassed or professionally repaired. After rectification of this issue, the machine should be operational again. Therefore, it is expressly sold as a used, repair-needing industrial machine for refurbishment. The machine is in used condition, consistent with its age. Signs of use, paint damage and contamination are present, see pictures. Technical data: • Manufacturer: EHT Werkzeugmaschinen GmbH • Model / Type: EHPS 15-35 • Machine number: 208712 • Year of manufacture: 1993 • Pressing force: 1,500 kN / approx. 150 t • Working length: 3,550 mm • Controller: Cybelec DNC 880 • Oil volume: 390 l • Power supply: 3~ • Frequency: 50 Hz • Operating voltage: 380 V • Control voltage: 220 / 24 V • Rated current: 50 A • Main fuse: 80 A • E-circuit diagram no.: 111002 Safety system: • System: Press safety system Starkstrom Gummersbach • Overrun time: 66 ms • Overrun distance: 9 mm • Safety distance: 105 mm Inspection / Pickup: The machine is located in an industrial hall and can be inspected by appointment. Dismantling, loading and transport to be clarified by agreement or by the buyer. Assistance with organization may be offered if needed. Sales notice: No warranty, no guarantee, no returns. Subject to prior sale and errors excepted. All technical information has been provided to the best of our knowledge based on nameplates and available information. Klsdpszd Sc Asfx Ah Tju

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 3.550 h, daya laser: 500 W, panjang meja: 3.048 mm, lebar meja: 1.524 mm, jarak pergerakan sumbu X: 1.524 mm, jarak gerak sumbu Z: 3.048 mm, berat keseluruhan: 2.495 kg, lebar total: 2.083 mm, tinggi total: 1.346 mm, panjang produk (maks.): 3.988 mm, beban meja: 1.000 kg, jumlah sumbu: 3, CO₂ laser cutting machine from 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It is equipped with a powerful 500 W CO₂ laser and offers a variety of cutting tables for different materials. If you are looking for a high-quality cutting machine, you should consider the KERN KER60120-KT500 OPF, which we have available for sale. Please contact us for further details about this machine. Device – JustLaser 15.30L-C500-MC • Machine Type: CO₂ laser cutting and engraving system • Configuration: Open flatbed gantry laser system • Maximum workpiece height: 50 mm • Maximum engraving speed: 3.8 m/s • Max engraving speed (metal cutting option): 3.2 m/s • Max engraving speed (Z12 option): 1.5 m/s • Maximum cutting speed: 0.5 m/s • Motors: Brushless DC servo motors • Encoder system: Incremental measuring system • Optics: Air-purged telescope, lenses, and mirrors • Standard lens: 2.5" • Optional lens: 5.0" • Software: KCAM laser software • Interface: G-Code, HPGL, AD-Logic system • Control board: KLCM control board • Operator controls: Key switch, emergency stop, mouse, keyboard, monitor and PC included • Power supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table extraction requirement: 3000 m³/h • Axis extraction requirement: 1500 m³/h • Max air pressure: 10 bar • Max suction pressure: 12 bar • Max air flow: 240 l/min • Connection size: 6 mm • Noise level: 55 dB • Certification: CE • Operating temperature: +15 °C to +25 °C • Humidity: 40-70% non-condensing • Environment: Dust-free • Active laser protective shielding • Pressure sensors • Light curtain • Safety system with interlock • Includes metal cutting option • Capacitive height sensing • Metal cutting bed • Copper nozzle • 2.5" lens kit • k-vision print and cut camera system • JustAIR high-performance turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser type: Shielded CO₂ laser • Laser power: 500 W (0.5 kW) • Laser wavelength: 10.6 µm • Supply voltage: 380-415 VAC • Phase: 3-phase (4 wire + ground) • Frequency: 50/60 Hz • Maximum fuse size: 40 A • Full load current: 32.3 A • Disconnect rating: 40 A • Short-circuit current rating: 5000 A • Interrupt capacity: 35000 A • Maximum amp load: 16 A • Laser class: Class 4 • Country of manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling type: Water cooling • Cooling capacity: 5 kW • Refrigerant: R410A Ksdpfx Ahezbub Dj Tjlu • Refrigerant fill: 1.5 kg • Weight: 136 kg • Power supply: 3~ 380-415 V, 50/60 Hz

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 10.020 h, gaya penekanan: 173 t, produsen pengendali: TRUMPF, model controller: TASC 6000, Press brake from 2017. This TRUMPF TRUBEND CELL 5000, featuring a TRUMPF TruBend 5170 press brake, offers a maximum pressing force of 1700 kN and a stroke length of 445 mm. It is equipped with the BendMaster 60 robot for automated material handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking for high-quality bending performance, consider the TRUMPF TRUBEND CELL 5000 press brake we have available for sale. Please contact us for further details. - Press brake model: TruBend 5170 (extended version) - Maximum pressing force: 1700 kN - Maximum operating pressure: 340 bar Ksdoza U Nfepfx Ah Telu - Stroke length: 445 mm - Voltage / frequency: 400 V / 50 Hz - Connected load: 29 kVA - Control voltage: 24 V - Robot model: BendMaster 60 - Robot connected load: 17 kVA - Robot weight: 2600 kg - Robot voltage / frequency: 400 V / 50 Hz - Control system: TRUMPF TASC 6000 (graphic shop floor programming, network capable) - Included equipment: Extended version press brake, BendMaster 60, automated material handling/gripper, fencing and protective enclosure TRUMPF BENDMASTER 60 - Operating hours: 56,582 h (as of 14.05.2025) - Load capacity: 60 kg (sheet metal part plus gripper) - Sheet load capacity: up to 40 kg - Supply voltage: 400 V (3~ phase) - Frequency: 50 Hz - Connected load: 14 kVA - Control voltage: 24 V - Max. fuse protection: 32 A - Manipulator axis system: 6-axis backgauge sensor system - Floor rail: Rail length extended to 10 m - Control unit: PC-based TRUMPF control with terminal (monitor, mouse, keyboard) - Material handling features: Contour-detection sheet sensor, double sheet detection sensor, rotary feedthrough for quick, tool-free gripper changes, gripper coupling on BendMaster - Supplied vacuum/gripper tooling: 3 modular vacuum grippers without singulating unit, 1 mechanical clamp gripper with rotary axis (incl. 3 sets of additional jaws) - Loading station: 1 sheet removal station with linear axis - Peripheral accessories: 1 gripper change console (max. 4), 1 mobile fanning magnet, safety fencing with access door Technical Specification Bending length 4250 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 45.541 h, daya laser: 3.200 W, jarak pergerakan sumbu X: 3.000 mm, jumlah sumbu: 3, This 3-axis TRUMPF TruLaser 3030 L20 was manufactured in 2015. It is equipped with a powerful TruFlow 3200 CO2 laser, offering a laser output of 3200 W, making it suitable for a wide range of cutting applications. The machine has a total operating time of 82,247 hours, ensuring reliability and performance. If you are looking for a high-quality laser cutting system, consider the TRUMPF TruLaser 3030 L20 we are offering for sale. Contact us for further details. - Laser type: TruFlow 3200 (CO2) - Laser power: 3200 W - Operating hours (NC): 82,247 h (as of 04/05/2026) - Operating hours (Laser On): 80,633 h (as of 04/05/2026) - Working hours (Beam On): 45,541 h (as of 04/05/2026) - Rated voltage: 400 V - Phases: 3~ - Frequency: 50 Hz - Connected load: 73 kVA - Control voltage: 24 V - Main fuse: 125 A - Nitrogen connection (N2): 30 bar - Oxygen connection (O2): 20 bar - Compressed air connection: 7-10 bar - Documented maintenance issues (07/05/2026): White connectors are degrading due to plasticizer loss; laser output does not reach the nominal value; oil spray unit non-functional (not in use); cooling fan operating limit reached (extended by +500h); filter mats worn/replacement required. - Control system (software version): SINUMERIK 840D SL - Configuration: Standard configuration - CoolLine (option): Not included Klodoza Uuhepfx Ah Tou - Cross conveyor (option): Not included - Fire extinguishing system (option): Not included - Integrated leak test (option): Not included

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 880 kg, Specification: Degree of protection: IP54 Control voltage: 24V DC Fuse protection: 16A Power: 0.5kW Kledpfswq R Rhjx Ah Tsu The hydropneumatic press with feeder from Tox Pressotechnik is a versatile and efficient solution for precise and reliable processing of various materials. By combining hydraulic power with pneumatic control, it ensures uniform force transmission as well as fast and controlled operation. The integrated feeder enables smooth material flow, enhancing productivity and optimizing the production process.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 4.300 mm, jarak lintasan sumbu Y: 2.250 mm, jarak gerak sumbu Z: 400 mm, daya motor spindle: 10.000 W, kecepatan spindel (maks.): 24.000 rpm, jumlah sumbu: 3, This 3-axis CNC machining center BHP200/VANTAGE714 by HOMAG WEEKE was manufactured in 2013. It features an impressive working area with an X-axis of approx. 4300 mm and a Y-axis of approx. 2250 mm. The machine is equipped with a powerful 10 kW spindle reaching speeds of up to 24,000 rpm, and includes an automatic tool changer with 14 positions. If you are looking for a high-quality CNC milling machine, you should consider the HOMAG WEEKE BHP200/VANTAGE714, which we are offering for sale. Contact us for further details. • Series: Weeke Vantage 200 Platform Electrical Data (from nameplate) • Supply: 415Y / 240 V • Phases: 3-phase • Frequency: 50 Hz • Full load current: 61 A • Recommended fuse: 80 A • Control voltage: 24 V Spindle: • Tool interface: typically HSK-F63 • Tool change: automatic Axes: • Servo-driven gantry system Tool Changer • 14-position Drilling Block • Vertical drills • Horizontal drills • Grooving saw Table type • Flat nesting vacuum table • MATRIX table variants • Zoned vacuum system • Automatic vacuum control Klsdpfszatdbsx Ah Teu Control / Software (typically paired with) • HOMAG performance control / Homatic 2000 IPC • WoodWOP software • MCC production software

Kondisi: bekas, Tahun pembuatan: 2018, lebar total: 1.800 mm, tinggi total: 2.200 mm, panjang total: 1.900 mm, Color: Grey Unladen weight: 1,500 kg Wide Belt Sander Boere Sandrit 1100C Kljdpfeyz U Dmox Ah Teu 380V Maximum sanding width: 1,100 mm Maximum sanding height: 150 mm Sanding unit: COMBI Motor: 11 kW (15 HP) Transport dimensions: 1,800 x 1,300 x 2,100 mm (L x W x H), weight 1,850 kg - Year of manufacture: 2018 - Documentation available: No - CE marking: Yes - CE certificate: No - Serial number: 18.03.7507 - Number of units: 1 - Unit 1: - Position: Top - Unit type: Pad sander - Sanding belt length [mm]: 1,900 - Sanding belt width [mm]: 1,100 - Roller diameter [mm]: 150 - Roller material: Rubber - Motor power [kW]: 15 - Max. working width [mm]: 1,100 - Min. working height [mm]: 3 - Max. working height [mm]: 152 - Feed motor [kW]: 0.55 - Feed speed: Manual - Min. feed speed [m/min]: 2.5 - Max. feed speed [m/min]: 8 - Feed rate adjustment: Stepless - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.6 - Transport dimensions: 1,900 mm x 1,800 mm x 2,200 mm (L x W x H) - Transport weight [kg]: 1,500 kg - Number of transport packages: 1 Financial Information VAT: The indicated price is exclusive of VAT VAT/Margin Scheme: VAT refundable for businesses Delivery and trade-in possible at any time for all items in the industrial sector Yorick Diebels

Kondisi: bekas, Tahun pembuatan: 2007, tinggi total: 2.200 mm, panjang total: 7.500 mm, lebar total: 1.500 mm, Weight: 4,000 kg Price: On request - Year of manufacture: 2007 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs.]: 8 - 1st unit type: Pre-milling unit - Tools included: Yes Klodpfeyzp Akox Ah Tou - 2nd unit type: Glue application unit - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End trimming unit - Tools included: Yes - 5th unit type: Rough trimming unit - Tools included: Yes - 6th unit type: Corner rounding unit - Tools included: No - 7th unit type: Flat scraper unit - Tools included: Yes - 8th unit type: Brushing unit - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 46 - Fuse [A]: 63 - Transport dimensions: 7500mm x 1500mm x 2200mm (L x W x H) - Transport weight [kg]: 4000kg Financial Information VAT: The stated price is net of VAT VAT margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all industrial sector equipment Yorick Diebels

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 50.000 h, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan spindel (maks.): 40.000 rpm, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel paths (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Power supply: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Type: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 👉 Integrated dust / fume extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in tool making 🧩 Features CNC control with operator panel 3-axis machining Compact and robust construction Complete system including extraction unit Made in Germany 📦 Condition Machine from ongoing production Fully functional Well maintained Inspection under power possible 🚛 Delivery Available at short notice Kljdpfxjyxyz Ss Ah Tsu Free loading onto truck 📌 Applications Mould making Electrode machining Precision processing 📞 Note Further pictures, videos and technical details on request. Subject to prior sale.

Kondisi: bekas, - Power consumption: 26 kVA 3P400V /N/PE/50Hz; Fuse protection 63A - Compressed air connection: min. 5 bar, max. 7 bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa min. 20 m/s, overrun time 15s Klsdpfx Ahswpkc Ie Tsu The system has been cleaned, packed by the manufacturer, preserved, and stored. It is complete and ready for operation. The system can be inspected at any time by appointment.

Kondisi: bekas, Tahun pembuatan: 1984, Technical details: X-axis travel: 400 mm Y-axis travel: 100 mm Z-axis travel: 100 mm Electrical configuration - voltage/frequency: 380/50 V/Hz Total power requirement: 0.8 kW Machine weight approx.: 132 kg Space requirement approx.: 1.6 x 0.6 x 1.4 m This milling machine is perfectly suited for window production. Vertical slot mortising machine for aluminium - Pneumatic workpiece clamping Kedju Nc Nxopfx Ah Telu - Feed by manual lever operation - Fuse: 2.2 V

Kondisi: bekas, Tahun pembuatan: 2000, Optima EC Automatic Checkweigher 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical Data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of manufacture: 2000 Machine type: automatic checkweigher Overall dimensions: approx. 1390 x 750 x 1500 mm (W x D x H) Electrical Connection Ksdpfx Ahek Aa Rke Tjlu Nominal voltage: L1/N/PE 230V AC / 115V AC (+6% / -10%) Nominal frequency: 50Hz / 60Hz (+/-2%) Connected load: 1.5 kW Fuse protection: 10 A Protection class: IP 65 acc. to DIN 40050 Weighing technology: Scale dimensions: approx. 600 x 750 x 1500 mm (W x D x H, without conveyor) Measuring principle: electromagnetic force compensation Weighing range: 0 – 60,000 g Verification intervals e: from 1g Accuracy: from +/- 0.5g Temperature: 5°C - 40°C, relative humidity 20 - 80% Noise level: The A-weighted equivalent continuous sound pressure level is below 70 dB(A) Conveyor 1390-700-590 and SEW Gear Motor with Brake Conveyor length (FL): 1390 mm Usable width (NUB): 700 mm Belt width (GB): 590 mm Motor type: SEW gear motor with brake Motor power: 0.55/0.55 kW S1 Hz 50 A 2.80/1.61 Speed: 10-36 m/min Total weight: 190 kg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist with planning and implementing your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Kondisi: bekas, berat muatan maksimum: 30.226 kg, berat keseluruhan: 39.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 06/2013, inspeksi berikutnya (TÜV): 11/2025, panjang ruang muatan: 13.320 mm, lebar ruang muat: 2.500 mm, tinggi ruang muatan: 2.650 mm, Tahun pembuatan: 2013, Perlengkapan: ABS,

Kondisi: bekas, Tahun pembuatan: 2023, New demonstration machine! List price: €86,567 net Base machine, complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the ProTec Type 0571 data sheet. Machining unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1,000-20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm Information: MultiUnit machining head with PowerBlock 21/23 spindles, grooving saw, and optional Profit milling unit Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Power supply TN or TT Pneumatic connection 7 bar (102 psi) On machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory side To machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side Supply line, hose inner diameter min. 12 mm Compressed air consumption: continuous: approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection 3x extraction ports Ø 80 mm Extraction speed 30 m/sec - measured at extraction port Extraction requirement min. approx. 2500 m³/h Machine weight approx. 1650 kg (with options!) Machine installation location: The ProTec can generally be anchored to the floor. A concrete floor (or foundation) is required (at least at the four corners/feet of the machine). Equipment: Protec 571 Profit HSK63F with 3-position magazine Folding roller table 765 mm (Y-axis), for machine front, width 500 mm Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety equipment via slat curtain Precondition for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec, shank Ø 10 mm with clamping surface (JSO) 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R HW grooving cutter Ø 125/30 mm Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and by arrangement Tool holder HSK63 F 3.00 pcs For 462E/OZ25 collet Collet 462E/OZ25 for shank 25 mm, 3.00 pcs. Indexable insert end mill Z1+1 1.00 pc HW with indexable insert spiral drill Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert spiral drill, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (the adapter 0571WAB10 must be ordered separately). Decorative grooving cutter HW indexable inserts Z1 1.00 pc D Ø 17 mm, d Ø 10 mm, L1 Ksdpfx Aow Tfzfoh Telu

Kondisi: bekas, Tahun pembuatan: 2025, en: New demonstration machine! List price €7,001 net #93803 High-performance dust extraction unit compliant with DIN 8416 for extracting dust from processing machines, suitable for installation in work areas outside of explosion risk zones. Key design features: - Robust galvanized sheet steel construction - Space-saving, compact design - Delivered ready for operation - Low energy consumption with high performance due to a clean-air side high-performance fan with special impeller - 2 large-volume collection containers with liner bags - Collection volume approx. 350 l - High operational safety and long service life thanks to BG-certified filters - Motorized cleaning device with automatic control and run-time accumulation - PLC control with automatic start (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Designed according to DIN 8416 - Residual dust content in exhaust air below 0.1 mg/m³ - Certified according to GS-HO-14 "GS - H3" Technical data: Suction nozzle position: Left Nominal air flow rate*: 1,450 m³/h Maximum air flow rate: 1,950 m³/h Negative pressure at connection point*: - at nominal air flow rate: 3,200 Pa - at maximum air flow rate: 2,700 Pa Filter area: 10.3 m² Suction nozzle: 160 mm Nozzle height, approx.: 1,500 mm (centered) Fan motor: 2.20 kW, 3x400 V, 50 Hz Shaker motor: 0.12 kW, 3x400 V, 50 Hz Pre-fuse: 16 A (provided by customer) Sound pressure level: 73.0 dB(A) Kodpfjx Hwp Aex Ah Tjlu Weight, approx.: 365 kg Dimensions, L x W x H: 1648 x 1012 x 1990 mm * Mandatory specification according to GS-HO-07 at 20m/s and loaded filter hoses (beech test dust). In delivery condition and under practical conditions with coarser dust, the extraction capacity is significantly higher. Location: Rieth

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 15.869 h, jarak pergerakan sumbu X: 1.035 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530 E, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, a Y-axis travel of 560 mm, and a Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control system and comes with a 30-position tool magazine. If you are looking for high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining center that we are offering for sale. Please contact us for further details. - PLC software number: 4B0000_HEDR_02C - release status: L3 - DSP1: 340514 03.1 - ICTL1: 340517 01 - Operating hours of the control: 40,697 hours - Machine runtime: 38,700 hours - Program runtime: 15,863 hours - Reference point time of axis 1: 14,213 hours / 15,835 hours - Tool change cycle time: 1,585 hours - Spindle taper: SK 40 - Tool magazine capacity: 30 positions (chain type) - Probe: Heidenhain TS640 - Electronic handwheel: Heidenhain - Power capacity: 35 kVA - Maximum rated current (A Jn max): 50 A - Fuse rating / input current: 63 A Kedpfxoy Uvnyo Ah Telu - Mains voltage: 400 V - Frequency: 50/60 Hz - Control voltage: 230 V - DC supply: 24 V - Central lubrication system: Vogel pump unit with Divinol Lithogrease 000 fluid grease - Pneumatic regulation unit: Integrated SMC/Festo air filter and regulator unit.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 850 mm, jarak gerak sumbu Z: 200 mm, daya motor spindle: 39.000 W, kecepatan spindel (maks.): 6.000 rpm, diameter benda kerja (maks.): 200 mm, berat keseluruhan: 12.000 kg, jumlah sumbu: 4, This 4-axis vertical turning machine, EMAG VSC 200 TWIN, was manufactured in 2005. It features a maximum chuck diameter of 200/250 mm and a swing diameter of 260 mm. With independent drives for the X and Z axes, it allows simultaneous machining of two workpieces. If you are seeking high-quality turning capabilities, you should consider the EMAG VSC 200 TWIN machine, which we have for sale. Please contact us for further details. • Operation type: OP 20 • Machine type: EMAG VSC 200 TWIN • Production type: Medium to large series production • Number of spindles: 2 • Simultaneous machining of two workpieces: Yes • Independent X/Z axis drives: Yes • Independent measurement systems: Yes • Driven tools: No • Maximum chuck diameter: 200 / 250 mm • Swing diameter: 260 mm • Maximum workpiece diameter: 200 mm • Loading time: 2-4 s • Spindle flange: DIN 55 026 Size 6 • Front spindle bearing diameter: 100 mm • Maximum spindle speed: 6,000 rpm • Main drive type: Asynchronous motor • Spindle power (40% duty cycle): 39 kW • Spindle power (100% duty cycle): 28 kW • Torque (40% duty cycle): 460 Nm Kljdpfey Uuybex Ah Tju • Torque (100% duty cycle): 340 Nm • Full power available from: 800 rpm • Rapid traverse X-axis: 45 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X/Z: 11 kN • Ball screw diameter X/Z: 50 / 40 mm • Turret type: Disc turret • Tool stations: 2 × 8 • Tool holder standard: DIN 69 880 • Tool shank diameter: 40 mm • Turret index time: 0.3 s • Machine bed material: Polymer concrete MINERALIT® • Automatic pick-up loading system: Yes • Automatic loading and unloading of workpieces: Yes • Vertical workpiece clamping: Yes • Operating voltage: 400 V • Control voltage DC: 24 V • Control voltage AC: 230 V • Frequency: 50 Hz • Connected load: 66 kW • Fuse: 160 A • Electrical standard: VDE 0113 • Approximate machine weight: 12,000 kg • Available controls: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece handling: Conveyor-based pick-up automation The technical data may vary slightly as these are custom-built machines! Technical Specification Driven Tools No

Kondisi: bekas, Tahun pembuatan: 2004, Color: Blue Weight: 8,000 kg Price: On request - Special Features: - Description: Available from 05-2026 (subject to delivery of the new machine) - Year of manufacture: 2004 Kledpfxeyy Nnqs Ah Tsu - Documentation available: Yes - CE marking present: Yes - CE certificate available: Yes - Serial number: 9076 - Main motor power: 15 - Control: Windows 10 - Max. cutting width: 450 - Max. cutting height: 160 - Infeed table length: 8,200 - Outfeed table length: 8,900 - Max. infeed length: 8,000 - Installation length [mm]: 23,000 - Installation width [mm]: 5,200 - Installation height [mm]: 2,700 - Safety features: Safety light curtain, safety fence - Options: Waste conveyor, label printer, marking pen - Fuse [A]: 63 - Power [kW]: 15.0 - Transport weight [kg]: 8,000kg Financial information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets

Kondisi: bekas, Tahun pembuatan: 2010, Used machine Year of manufacture: 2010 Equipment and Technical Data: Right-hand configuration 2 side tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (Double Unit) Max. application width: 2,040 mm (2 × 1,020 mm) Configuration: double unit, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Doctor blade: pneumatically actuated, needle bearing mounted Main bearing lubrication: external, filling via manual grease gun Container seal: can be adjusted and replaced without removing the application unit Application speed control: via frequency inverter Speed range: 3.2 - 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Pressure roller lowering: automatic after drive motor shutdown Height adjustment material clearance: electric motor in manual jog mode Application unit stroke: 0 - 200 mm Transport height: 925 mm (lower edge of material) Pressure roller drive: separate drive Motor: incl. motor bracket, mounting and cover Additional application speed control: via separate frequency inverter Additional speed range: 3.2 - 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pcs, made of anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Heating control: timer (daily and weekly programme) Klodpfsy E Avlsx Ah Tsu Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Rated power: 18.5 kW Control voltage: 24 V Rated frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Application: melting and application of non-reactive hot-melt adhesives Weight: 1560 kg Availability: short notice Location: Rhineland-Palatinate

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), OTEC special machining machine SF 170/270/1000 for camshaft bushings For sale is an OTEC special machining machine designed for processing and surface finishing of camshaft bushings. The system is suitable for machining both short and long camshaft bushings and was developed for industrial series production applications. Technical Data: Manufacturer: OTEC Machine type: SF 170/270/1000 Application: Machining and surface finishing of camshaft bushings Machine dimensions: • Length: approx. 2,586 mm • Width: approx. 798 mm • Height: approx. 1,785 mm • Loading height: approx. 920 mm Weight: • Machine weight: approx. 1,200 kg • Transport weight: approx. 1,400 kg Electrical connection data: • Voltage: 3 x 400 V • Frequency: 50/60 Hz • Fuse protection: 32 A • Connected load: 12.5 kVA • Max. power consumption: 10 kW Compressed air connection: • Operating pressure: 6 bar • Connection: DN 7.2 (R 1/4”) Water connections: • Inlet: 3/4” (Ø 16 mm) Kljdpszb Abxsfx Ah Teu • Outlet: 1 1/4” (Ø 31 mm) Workpiece dimensions: Long camshaft bushing: • Length: approx. 177.5 mm • Inner diameter: approx. 89 mm Short camshaft bushing: • Length: approx. 89 mm • Inner diameter: approx. 89 mm Features: • Sturdy industrial design • Compact footprint • Automated machining process • Suitable for series production • Integrated media connections for compressed air and water Location: Germany Inspection possible by appointment.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, panjang meja: 10.900 mm, panjang pemakanan sumbu X: 10.200 mm, panjang umpan sumbu Y: 1.960 mm, panjang umpan sumbu Z: 1.850 mm, tinggi penyerutan: 1.850 mm, lebar perataan: 1.750 mm, kecepatan spindel (min.): 9.000 rpm, WALDRICH COBURG Hydraulic Double-Column Planing and Grinding Machine Control System: Conventional contactor control Operation: Original Waldrich Coburg main control panel with push buttons, rotary switches, analog indicators, and emergency stop Display / Positioning: 2 x HEIDENHAIN POSITIP digital position displays / positioning aids on the main control panel Additional control units: Siemens SIMATIC HMI KTP700 / KTP400 for grinding support and grinding attachment Partial modernization 2021: approx. EUR 170,000 Continuous modernizations / retrofits up to 2021 Retrofitted grinding attachment Klsdpsy Ubn Sefx Ah Tsu Modernized grinding support Siemens / Lenze drive technology Switch cabinet and modernization documentation available Working Area Maximum planing width / clamping: 1,750 / 1,790 mm Maximum throat height: 1,850 mm Total clamping area: 10,900 x 1,500 mm Additionally documented: 2 x 4,750 x 1,500 mm Usable table/length per specification: approx. 10,200 mm T-slots: 7 units T-slot spacing: 210 mm T-slot width: 28 mm Minimum crossbeam / cross-rail width: 420 mm Crossbeam / Columns / Supports Number of crossbeams: 2 Number of columns: 2 Crossbeam horizontal stroke: 1,960 mm Crossbeam vertical stroke: 250 mm Column horizontal stroke: 550 mm Column vertical stroke: 1,850 mm Support swiveling: +/- 60° Support tiltable: +/- 25° Speeds / Feeds Working speed: 5 - 60 m/min Return speed: 5 - 60 m/min Planing slide vertical: 0.1 - 7.5 mm Planing slide horizontal: 0.1 - 15 mm Column slide vertical: 0.1 - 7.5 mm Column slide horizontal: 0.1 - 7.5 mm Dimensions / Weight / Connection Space requirement: 22.67 x 3.97 m Height: 3.95 m Weight: approx. 51,872 kg Voltage: 500 V Fuse protection: 125 A Current type: three phase Frequency: 50 Hz Grinding Support / Grinding Attachment Grinding support with grinding spindle Guideway system with base body and Z-axis Y-axis grinding support retrofitted to ball screw spindle 40 x 10 Preloaded double nut Single-axis control for feed axis Right angle gear motor 72 Nm Synchronous servo motor 11 Nm with absolute encoder Rittal compact control cabinet Grinding Spindle / Grinding Wheel Drive Siemens asynchronous motor for grinding spindle 9 kW at 1,500 rpm / 57 Nm 10 kW at 1,750 rpm / 55 Nm Max. speed: 9,000 rpm Siemens SINAMICS drive technology Siemens SIMATIC control unit for grinding support / grinding attachment Lenze L-force axis drive for Y-axis grinding support Separate control cabinets for grinding wheel drive and Y-axis grinding support Cooling / Hydraulics Schimpke DK150-V cooling unit Cooling capacity approx. 17.5 kW Cooling medium: oil ISO VG46 Gear pump approx. 135 l/min against 10 bar Pump motor approx. 5.5 kW Transformer 500 V to 400 V Separate hydraulic unit available Mechanics / Overhaul Partial overhaul on bed/table, crossbeam with Y1/Y2 slides, Z1-axis planing support and lubrication system Machine bed hand-scraped Bed geometry established Table hand-scraped Guideways reworked Y1/Y2 slides hand-scraped Rails coated and hand-scraped Steel tape replaced Central lubrication extended Scrapers replaced Crossbeam lifting system repaired Worm shaft, central drive shaft, coupling pieces, and rolling bearings replaced X-axis bellows replaced Condition / Equipment Column area newly painted Table and functional surfaces in very good condition Accessories, components, and spare parts available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, kecepatan spindel (maks.): 6.500 rpm, berat keseluruhan: 6.000 kg, Diameter batang (maks.): 42 mm, jarak pergerakan sumbu X: 50 mm, jarak lintasan sumbu Y: 350 mm, produsen pengendali: MITSUBISHI, model controller: M730UM, jumlah sumbu: 10, This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6,500 rpm and is equipped with a high-pressure coolant system rated at 20 bar. The machine comes with a 3,200 mm long bar feeder and offers advanced capabilities for precision turning. If you are looking for a high-quality lathe, consider the DMG MORI Sprint 42/10 linear model we have available for sale. Please contact us for further information. Kledpfjy T Hzujx Ah Tou • Maximum spindle speed 1: 6,500 rpm • Maximum spindle speed 2: 6,500 rpm • Maximum Z-axis travel: 120 mm • Electrical phases: L1, L2, L3, N, PE • Power consumption: 57 kVA • Maximum input current: 82 A • Main fuse: 100 A • Short-circuit withstand capacity: 5 kA • Maximum voltage: 440 V • Operating voltage: 400 V • Voltage tolerance: ±10% • Frequency: 50 Hz • AC voltage: 230 V • DC voltage: 24 V • Counter spindle flushing: Included • Internal coolant supply to counter spindle: Included • Internal coolant supply to main spindle: Included • Radial driven drilling and milling unit for turret: Included • Axial driven drilling and milling unit for turret: Included • Angle-adjustable drilling and milling unit: Included • High-pressure coolant system: 20 bar • Bar feeder: IEMCA BOSS 552 • Bar feeder length: 3,200 mm Technical Specification Through-spindle coolant: Yes Counter spindle: Yes Driven tools: Yes

Tahun pembuatan: 2017, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17208800, This listing is for a 190-litre rectangular boiling kettle, gas-heated, from premium manufacturer MKN, model Optima 850 (2062832S). Safe and easy emptying is ensured via a safety drain tap. The boiling kettle features a thermostatic temperature controller, automatic operating water monitoring and replenishment, and is always ready for use. The Vapro rapid steam system enables a short heat-up time, while the double-jacket kettle with separate (integrated and maintenance-free) steam generator ensures low energy and water consumption and a high efficiency for fast heating. The unit has undergone a full inspection in our in-house workshop and is fully functional. The kettle is in good used condition. The boiling kettle is available from calendar week 15. You will receive an invoice with VAT shown separately. Our used equipment service for you: • 6-month warranty on all electrical components, limited to replacement of defective parts, excluding labour costs for removal/installation • High-quality branded equipment at fair prices Ksdpfx Ahjyxp Smo Tolu • Professional refurbishment, inspection & expert cleaning • Tested & fully functional • Flexible shipping or self-collection options • Competent advice before and after purchase • Provision of user manuals, wiring diagrams & spare parts • Safety inspection according to DGUV V3 Technical Data: • Dimensions (W x D x H): approx. 1000 x 850 x 700 mm + 150 mm leg height • Inner kettle: 700 x 540 x 535 mm deep; accommodates 4 x GN 1/1 pans, 200 mm deep Gas connection: • DN 20 (3/4") • Model: 2062832S • Serial number: 17208800 • Year of manufacture: 2017 Condition: Used, newly inspected, fully functional Further details: • Electric temperature regulation via rotary knob controls • Usable volume: 180 litres • Nominal volume: 195 litres • Housing made of stainless steel (chromium-nickel) • Double-walled lid • Main switch, power selection switch • Temperature regulator • Safety temperature limiter • Hardwired electrical connection • IPX 5 • Pressure regulator • Pilot heater • Indicator lights • Water solenoid valve / gas solenoid valve • Level regulator with level electrode Heating time: • 34 min (determined according to DIN 18855) • Gas control valve Connection ratings: • 0.04 kW, 1 NPE AC 230 V, fuse: 1 x 16 A • Nominal heat load: 30 kW, set for natural gas 20; 25 mbar • Can be converted to liquid gas (30; 37; 50 mbar) Heat output: • Sensible: 3,000 W, latent: 9,000 W Shipping: • Delivery or self-collection by arrangement • Worldwide shipping available on request • Shipping to islands or mountain stations only by arrangement If you have questions, would like to receive advice, or wish to view the item on site, you can contact us by phone during our business hours: Monday–Friday, 09:00–13:00 and 14:00–17:00. Sale takes place solely according to our general terms and conditions.

Kondisi: bekas, Tahun pembuatan: 1987, panjang total: 2.800 mm, lebar total: 1.700 mm, tinggi total: 1.300 mm, Color: Green Weight: 500 kg - Year of manufacture: 1987 - Documentation available: No - CE certificate available: No - Serial number: 87-7-23 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 145 - Parallel fence travel [mm]: 1100 - Sliding table length [mm]: 2800 - Table width [mm]: 1150 - Max. saw blade diameter [mm]: 450 - Saw blade bore diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Manually adjustable axes: Cutting height, tilting - Spindle speed: Manual - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 4000 - Tilting saw unit: - └ Min. tilting [°]: 0 - └ Max. tilting [°]: 45 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 2800mm x 1700mm x 1300mm (L x W x H) - Transport weight [kg]: 500kg Kledpfx Aey Ttrajh Tou - Number of transport packages: 1 Financial Information VAT: The stated price is net of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, lebar total: 1.800 mm, tinggi total: 2.110 mm, berat keseluruhan: 1.500 kg, panjang produk (maks.): 1.710 mm, Deburring machine from 2007. This Fladder AUT-1000 VAC operates on 3 x 400 V, with a frequency of 50 Hz and a current rating of 50 A. If you are looking for high-quality deburring solutions, you should consider the Fladder AUT-1000 VAC we have for sale. Contact us for further details. • Voltage: 3 x 400V • Frequency: 50 Hz • Current: 50 A • Working height: 850 mm • Vacuum table width: 1000 mm • Max. workpiece height: 100 mm • Max. workpiece width: 1000 mm • Feed speed: 0.3 - 4 m/min • Standard feed speed: 0.3 - 3.6 m/min • Extraction capacity: 2500 m³/h • Extraction port: 1x Ø200 mm • Number of spindles: 6 • Spindle length: 350 mm • Number of abrasive flaps: 168 • Main motor power: 7.5 kW • Rotary motor power: 0.37 kW • Oscillation motor power: 0.55 kW • Feed motor power: 1.5 kW • Vacuum turbine motor power: 7.5 kW • Max. fuse: 63 A Kedpfx Ahoy Tmbhs Telu • Min. fuse: 50 A • Air pressure: 1/4", 6 bar • Through-feed deburring machine for flat sheet metal parts • Deburring of edges and cut-outs • Includes external vacuum turbine • Special paint finish: RAL 7035 • Frequency inverter: VLT 2807 for external infeed conveyor • Max. power of external conveyor: 0.75 kW • Including motorized conveyor • Conveyor belt dimensions: L = 1000 mm, W = 1010 mm • Roller table at workpiece discharge • Roller table dimensions: L = 1500 mm, W = 1000 mm • 6 abrasive rollers • Abrasive cylinder length: 350 mm • The extraction cyclone is present, but rusty. It has still been used in this condition.