Beli Pengikat Dengan Mesin Pengumpul bekas (77.622)

Kondisi: bekas, Mesin Pengikat Pita Elastis Industri Cyklop EMT-AXRO, Mesin Bekas Pabrikan Cyklop International GmbH (Cologne, Jerman) Model EMT-AXRO Fedpfxozh Uu Nj Ailopi Spesifikasi Teknis Tahun Pembuatan: 2003 Catu Daya: 230 V / 50 Hz Konsumsi Daya: 0,18 kW Dimensi Keseluruhan Lebar: 570 mm Kedalaman: 460 mm Tinggi: 720 mm Berat: 30 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Ketebalan tepi: 0,2 - 12 mm Dimensi benda kerja: Lebar minimal 70 mm Tinggi minimal / maksimal 8 / 42 mm Panjang minimal 160 mm (tepi strip) Panjang minimal 60 mm (dari gulungan) Kecepatan umpan: 12 m/menit Rol pengaplikasi lem Tinggi kerja 880 mm Udara bertekanan 6 bar, 1/4 inci Sambungan saluran pembuangan debu DM 160 mm Dimensi mesin P x L x T = 5600 x 950 x 1300 mm Berat: sekitar 2200 kg Daya yang dibutuhkan: sekitar 11,5 kW, 400 V, 50 Hz Peralatan: - Sistem penekanan ganda dengan pengaturan ketinggian elektrik - Majalah otomatis untuk tepi gulungan hingga 800 mm DM - Gunting pneumatik untuk tepi strip hingga 3 mm - Penggaris masuk otomatis Unit pemotongan awal dengan 2 motor frekuensi tinggi 1,5 kW, 12000 rpm Gergaji pemotong ujung ganda - 2 motor frekuensi tinggi 0,2 kW, 12.000 rpm 2 posisi otomatis = 0 + 3 derajat Unit pemotongan sisi dengan 2 motor frekuensi tinggi 0,7 kW, 12.000 rpm Unit pemotongan radius - dengan 2 motor frekuensi tinggi 0,3 kW, 12.000 rpm Unit pembulatan sudut AR2 - dengan 2 motor frekuensi tinggi, 0,3 kW, 12000 rpm, sistem sentuh dua tahap Pisau penyerut permukaan Catatan untuk mesin bekas: • Kesalahan dalam spesifikasi teknis dan kemungkinan penjualan dapat terjadi. Fedpfx Aiohy Tlrslopi • Harga yang tertera adalah harga pengambilan di lokasi – bebas biaya pemuatan! • Mesin telah dibersihkan dan diuji fungsinya. • Semua mesin dijual sebagaimana adanya setelah diperiksa tanpa jaminan apa pun. • Pembeli berhak untuk memeriksa mesin di lokasi. • Perjanjian khusus hanya mungkin dilakukan secara tertulis. (Permintaan hanya akan kami jawab jika menyertakan alamat dan nomor telepon Anda!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Edge thickness: 0.2 – 12 mm Workpiece thickness: 8 – 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Fjdolc Ewiopfx Ailepi Automatic edge magazine Jointing cutter unit: 2 x 1.5 kW, servo-controlled End trimming unit: 2 x 0.3 kW Flush trimming unit: 2 x 0.7 kW, single-sided tracing Fine trimming unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine radius trimming unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatic feed Surface scraper unit, with fine-adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spray unit (2 x separating agent, 1 x sliding agent, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 – 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Kondisi: bekas, Tahun pembuatan: 2016, Industrial Automatic Edgebanding Machine SOLUTION XD MAIN FEATURES “E TOUCH” CONTROL WITH AUTOMATIC PROGRAMMING: ONE “TOUCH” IS ENOUGH TO OPERATE THE MACHINE Standard pressure unit with drive belt for optimum panel guidance Edgebanding of coil material, strip edges, and solid wood edges GENERAL FEATURES Single-sided edgebander in left-hand configuration for edgebanding coils and strips using all common hot-melt adhesives. The base frame consists of a robust welded steel frame with increased rigidity, providing optimal support for housing the processing units. The top pressure is made of thick-walled steel profile with a double trapezoidal drive belt, which is positioned automatically according to the panel thickness. Height adjustment is displayed both on the top pressure and on the operator’s console. Manual workpiece feed system with generously sized working line and enlarged support surface for easy introduction of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling unit. Machining units mounted on the pressure beam and mechanically linked to guarantee automatic adjustment when changing panel thickness. Lower processing units are fixed to the machine base or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency converters (inverters); each unit has its own inverter for optimal flexibility and improved production times. Protective hood for all units located after the gluing station, with polycarbonate windows providing a clear view of the processing units during operation. Interior lighting of the hood, equipped with sound-absorbing material to reduce noise emissions during operation. Spacer at the infeed fence allows correct panel loading. The spacing is automatically adjusted according to the selected feed speed. Fedpfjxy Tm Iex Ailopi Swiveling control panel positioned at the infeed area, adjustable for ergonomic operation. Electrical system complies with current regulations. Electrical components are housed in a metal cabinet mounted to the machine frame with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide plates made of rubberized nylon, for optimal guidance and high durability. The chain runs on two guides made of hardened and ground steel—one round, one flat—to ensure straight panel feed and to prevent lateral deviation. Automatic lubrication of the chain, with lubricant amount controlled by the system according to panels processed. External roller conveyor running the entire length of the machine, with an extendable opening system (up to 650 mm) for panels with maximum width of 1200 mm. E-TOUCH PC control system for quick and easy handling of main functions including: – Processing programs in Just-in-Time mode – Option to manage via parts lists – Option for management through ...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, - Ketebalan benda kerja hingga 60 mm - Ketebalan tepi hingga 3 mm - Kecepatan maju: 16 - 20 m/menit - Panjang total: 9365 mm - Powercontrol PC23 Unit: - Unit semprot cairan pemisah atas/bawah - Pemotong finishing 2x 3 kW - Unit pengeleman dengan majalah 2 rol - Unit pemotong HL 81 0,8 kW - Unit prapanen FF30 bawah/atas; 4x 0,4 kW - Ruang kosong untuk 2 unit tambahan - Pisau profil PN 10 - Pisau penyerut permukaan Fpodpfx Aiew R T Alslji - Unit semprot cairan pembersih - Unit pemoles

Kondisi: bekas, nomor mesin/kendaraan: 008494, de-001 Fpodpfx Aszbxznjilji

Kondisi: bekas, nomor mesin/kendaraan: 008586, typ_der_angebrachten_kante Fedpfx Asy In A Noilspi

Kondisi: bekas, nomor mesin/kendaraan: 006710, Jenis tepi yang diaplikasikan: tepi tipis, tepi tebal, kayu solid, veneer Fpodpjqy Em Tjfx Ailoi Sistem lem: EVA, udara panas Profil joining: ya Unit multifungsi: ya Kecepatan umpan maksimum: 11 m/menit

Kondisi: bekas, nomor mesin/kendaraan: 008132, Tipe tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA Penyambungan frais: ya Unit multifungsi: ya Fedpfow Idc Rjx Ailspi Kecepatan maju maksimum: 18 m/menit Ketebalan panel maksimum: 60 mm Unit kerja: 7 unit

Kondisi: bekas, nomor mesin/kendaraan: 008587, typ_der_angebrachten_kante Fpjdpfxsy In Dgo Ailoi

Kondisi: bekas, nomor mesin/kendaraan: 008109, Jenis pinggiran yang dipasang: pinggiran tipis, pinggiran tebal, kayu solid Sistem perekat: EVA Milling sambungan: ya Unit multifungsi: ya Ketebalan papan maksimum: 12 mm Fodpfxow Idc De Ailopi Unit kerja: 9 unit

Kondisi: bekas, nomor mesin/kendaraan: 008585, typ_der_angebrachten_kante Fsdpey In A Asfx Ailjpi

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 3750, Fungsionalitas: berfungsi sepenuhnya, The machine applies glue to solid wood up to 18.0 mm thick as well as coil material up to 3.0 mm. It trims coil material (PVC, ABS) up to 3.0 mm thick and real wood edging up to 2.0 mm. Flush trimming of up to 18 mm. Corner rounding and chamfering milling stations. Total length: 3.20 m Power consumption: 7.1 kW Glue pot End trimming shears Fpjdpfxoigad Ee Ailei Stepless feed speed Cross-cut saw for front and rear edges Flush trimming unit Corner rounding unit Chassis/mobile base Extraction port: 100 mm

Tahun pembuatan: 1995, Kondisi: belum diuji (bekas), Connected load 380V 55A PMS control system Pre-milling unit 1961 Magazine 1901 Fedpfxjnxkm Ee Ailopi Gluing station 1906 Pressure unit 1926K End trimming unit 1916 Flush milling unit 1962 Profile milling unit 1966, 3 mm radius up to 15 mm flush Radius scraper 1927 Contour milling unit 1983 Buffing unit 1941 Extraction connections 1x160 mm, 1x125 mm Compressed air connection 6 bar

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 558/0-112, Fungsionalitas: berfungsi sepenuhnya, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Edge feed 1901 Tracing nozzle Pressure unit 1913 MOT End trimming unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for contour milling Scraper 1929 Fsdpfxjh Uyg Eo Ailjpi Profile milling unit 1983 Flat scraper 1964 Buffing unit 1944 Length approx. 5900 mm Connected load 21.4 A

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1993, nomor mesin/kendaraan: 869/9-302, Fungsionalitas: berfungsi sepenuhnya, Connected load 380V 21A Edge magazine Glue station 1906 Pressure unit 1914 Cross-cut saw unit 1976 Rounding milling unit 1943 Rounding profile scraper 1927 Buffing unit 1944 Fsdoiamufjpfx Ailjpi Control panel top Extraction port D=100 mm Operating manual No interchangeable unit for flush milling

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 315/0-110, Fungsionalitas: berfungsi sepenuhnya, Control panel at top Edge feed 1902 Glue application station 1906 Cut-off shear 1902 Pressure unit 1816 Cutting unit 1918 Milling unit 1942M Rounding scraper 1929 Profile milling unit 1983 Fpjdpfxsh Ux Suo Ailoi Flat scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Length approx. 5300 mm

Kondisi: belum diuji (bekas), Tahun pembuatan: 1991, 400V power supply / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, Length 4425 mm, Height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed speed 13 m/min Edge thickness max. 5 mm, coil material 3 mm Edge magazine 1301 with DAZ 11 Gluing unit 1906 Fpedpfxeiw D Ude Ailoi Pressure section 1914 End trimming unit 1976 Flush trimming unit 1942 Radius trimming unit R2 1943 Scraper unit 1927 Buffing unit 1944

Tahun pembuatan: 1990, Kondisi: bekas, Power connection 400 V 3 kW Glue roller Milling unit 2x flush Roll material up to 0.4 mm Dimensions (LxWxH): 3150 x 680 x 1250 mm Weight approx. 400 kg Conversion to 2 mm PVC edging possible = Surcharge €1,000.00 Fpsdpfx Aijkkfk Njlei

Kondisi: baru, Tahun pembuatan: 2025, Edgebanding unit: Yes Edge thickness: up to 3mm Workpiece thickness: from 8mm to 50mm Minimum workpiece width: 110mm Glue pot: Granulate, quick-change container End trimming saw: yes End trimming / flush cutting: yes Milling station: Chamfer / radius Corner copying: yes Fjdpfxsk Eai Us Ailopi Flat scraper: yes Radius scraper: yes Buffing unit: yes Anti-adhesive spray unit: yes Manual infeed fence adjustment Manual workpiece thickness adjustment Connected load: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Kondisi: bekas, Lokasi gudang: Sonnefeld Fpsdpfxeway Dce Ailji

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Fpedjvvkd Tspfx Ailoi

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Fodpfxjvvkfdj Ailspi Chip removal max.

Kondisi: bekas, Tahun pembuatan: 2001, Laitteen reunalistan ja kappaleen mitta- ja varustetiedot, varastopaikalla Nattheim. Fsdpfovvkfqsx Ailjpi

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Fsdpfovvkfwjx Ailjpi