Beli Silinder Grinding Machine - Universal bekas (67.327)

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter 250 mm Grinding length 400 mm Centre height 125 mm Control Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table re-ground - New table geometry - New geometry from workpiece headstock to grinding spindles B-axis with 1° Hirth serration Gsdpfjvx Dvujx Aclska Longitudinal positioning HF internal grinding spindle GAP Paper band filter

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight approx. 3 t High-End Kellenberger 1500U Ideal for spindle manufacturers or spindle overhaul specialists - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when in position A quantum leap in safety technology - Infinitely variable grinding spindle speed: 1,000–1,500 rpm Godpfet Ii Rrsx Aclska - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of spindle speeds - Swivel angle display – upper table - Swivel angle display – wheel head - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine has already been delivered. An identical machine can be assembled with additional options. At present, the machine does not comply with the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The determination of the necessary minimum protective measures must be established through a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. Gsdpfsvq R Uzsx Acloka The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180 +/- ° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. fixture Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Gsdsuxftxepfx Acljka As a global leader in Kellenberger overhauls/retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your recently delivered machines with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways on the X-axis flat slide as well as standard air lift on the grinding headstock. - Digital readout on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not meet the basic health and safety requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment Gkedpod Ih D Ejfx Aclsa - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Gedpfx Acsv I Eq Soleka Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ Gkodpfxevdk N Ee Aclea High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software Gkodeuxfucjpfx Aclja - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Gkjdpfouxfupex Aclea Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Gsdpfjt Ii Nbex Acljka Photo shows a recently completed machine with partially different options. Fanuc 21i control system - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment - Fine adjustment upper slide - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Gedjt Ii Nujpfx Acljka Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Swiveling grinding headstock: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: - Encoder with digital display on workpiece spindle headstock - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A Karstens cylindrical grinding machine, originally from 1992 and completely overhauled and modernized in 2014, is available. Centre distance: 1000mm, centre height: 180mm, grinding diameter: 360mm, max. workpiece weight between centers/floating: 250kg/70kg, grinding wheel diameter: 400mm. Spindle taper: MK4, speed: 450rpm, swivel range: 90°, tailstock taper: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, feed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Includes 3 almost new centers and grinding wheels. Documentation available. Inspection on site possible. Gjdsv Suftjpfx Acleka

Kondisi: bekas, de-to-hu-it-lt-2024-06-13-01 Gkodsyqv Udopfx Acloa

Kondisi: bekas, Tahun pembuatan: 1990, Penyetelan cepat dudukan spindle gerinda dengan bantalan udara Gedpfxoxbh Ebe Aclska

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Gsdpsynmpgefx Aclska Accessories available on request.

Kondisi: bekas, Tahun pembuatan: 2004, de23t01 Gkodjywntyspfx Aclsa

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Offered is a CNC-controlled universal cylindrical grinding machine, model EMAG Weiss W 11 CNC. The machine is suitable for external, internal, face, and cylindrical grinding tasks. The W 11 CNC cylindrical grinder is ideally suited for single-part, prototype, and series production. It is also utilized in training and maintenance departments. CONTROL SYSTEM Eckelmann TECHNICAL DATA - Maximum workpiece length: 1,500 mm - Center height: 200 mm | Option: 320 mm - Workpiece weight: 250 kg - Workhead: Morse taper 4 | Option: Morse taper 5 / 6 - Tailstock: Morse taper 4 TOOL CARRIER Single wheel version, angled or straight; dual wheel with B-axis and internal grinding spindle also available as options. Price, delivery time, and machine configuration upon request. Gedpor Ey Husfx Acleka

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 500 kg, 1 Gkedpfx Acsx Uwqpolja

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 81019 01, kedalaman penggilingan: 500 mm, diameter penggilingan: 800 mm, kecepatan spindle penggilingan: 250 rpm, diameter benda kerja (maks.): 800 mm, rentang pivot: 15 °, Mesin dalam konfigurasi khusus dengan diameter putaran yang diperbesar dan pergeseran melintang hidraulik yang diperluas! Direkonstruksi dan dimodernisasi pada tahun 1995 di pabrik Glauchau, dan mulai beroperasi pada tahun 1996. RINCIAN TEKNIS Area kerja dan diameter penggerindaan Diameter penggerindaan internal: 30–630 mm Diameter penggerindaan internal yang diperluas maks.: 800 mm Diameter penggerindaan eksternal maks.: 800 mm Diameter benda kerja maks.: 800 mm Gkedpfx Ajzqcvtsclja Area penggerindaan dan gerakan meja Kedalaman penggerindaan: sekitar 500 mm Langkah meja: 800 mm Diameter putaran dengan pelindung benda kerja maks.: 800 mm Diameter putaran tanpa pelindung benda kerja: sekitar 850 mm Jarak dan pengaturan Jarak antara kepala spindel benda kerja dan penyangga spindel penggerinda: maks. 1.225 mm Pengaturan perlengkapan penggerindaan internal pada meja: maks. 545 mm Pergeseran melintang dudukan spindel benda kerja: maks. 650 mm Kemiringan dudukan spindel benda kerja: maks. 15° Spindel benda kerja Kecepatan putar spindel benda kerja: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 RPM Berat benda kerja: maks. 1.000 kg Kepala spindel: DIN 55021, ukuran 11 RINCIAN MESIN Pengaturan dan tampilan posisi Jenis pengaturan: konvensional Pengaturan melintang: melalui motor roda gigi dan perangkat pemosisian Tampilan posisi digital: HEIDENHAIN, 2 sumbu Sistem pendingin Sistem pendingin: dengan pemisah magnet Dimensi & Berat Mesin: 4100 x 2200 x 2500 mm Palet Eropa dengan aksesori Tangki pendingin: 1700 x 800 x 750 mm pada palet Eropa Berat mesin: sekitar 6,4 ton PERLENGKAPAN Sistem pendingin dengan pemisah magnet Pengunci atau sepatu mesin Berbagai roda penggerinda Pengasah berlian Plat datar besar Perlengkapan penggerindaan internal dan permukaan Lampu mesin halogen Dokumentasi mesin

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 163190, panjang penggilingan: 600 mm, lebar penggilingan: 300 mm, berat benda kerja (maks.): 270 kg, diameter roda gerinda: 350 mm, jarak meja ke pusat spindel: 565 mm, Mesin penggerinda datar horizontal kondisi baru dengan jam operasional yang sedikit! RINCIAN TEKNIS Area Penggerindaan Panjang penggerindaan: 600 mm Lebar penggerindaan: 300 mm Meja Kerja dan Beban Benda Kerja Dimensi meja: 300 mm × 630 mm Berat benda kerja maks.: 270 kg Jarak sumbu spindel – permukaan meja: 565 mm Rentang Gerakan dan Penyesuaian Rentang gerakan sumbu X: 765 mm Rentang gerakan sumbu Y: 340 mm Pembagian cincin skala sumbu Y: 0,02 mm Pembagian cincin skala sumbu Z: 0,005 mm Penyesuaian melintang otomatis sumbu Z: 0,1–8 mm Kecepatan Maju dan Cepat Kecepatan maju hidraulik sumbu X: 7–23 m/menit Kecepatan cepat sumbu Y: 990 mm/menit Kecepatan cepat sumbu Z: 460 mm/menit Batu Gerinda Dimensi batu gerinda: 350 mm × 40 mm × 127 mm RINCIAN MESIN Jenis kontrol: Konvensional Tampilan posisi 2 sumbu: KNUTH Xpos 3.1 Daya motor spindel penggerinda: 5,5 kW Total kebutuhan daya: 7 kW Gedpfozqcvgjx Aclska Dimensi & Berat Dimensi mesin: 2.800 mm × 2.200 mm × 1.890 mm Berat mesin: sekitar 2,7 t PERLENGKAPAN Tampilan posisi 2 sumbu KNUTH Xpos 3.1 Batu gerinda Flensa batu gerinda Poros penyeimbang Dudukan penyeimbang Lampu kerja halogen Pelat magnet 600 mm × 300 mm Sekrup penyetel Alat pengoperasian Penyesuaian melintang dan memanjang otomatis Gerakan meja memanjang hidraulik Panduan V ganda untuk gerakan memanjang Panduan V dan datar gabungan untuk gerakan melintang Jalur panduan meja yang dikeraskan dan digerinda dengan lapisan PTFE Spindel penggerinda dengan bantalan bola miring presisi yang tahan lama dan diberi tegangan awal Unit hidraulik eksternal Pelumasan pusat otomatis

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 7.315 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4445, jarak pergerakan sumbu X: 2.320 mm, jarak lintasan sumbu Y: 1.980 mm, jarak gerak sumbu Z: 860 mm, model controller: Siemens Sinumerik 840D sl, kecepatan spindel (maks.): 40.000 rpm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Harga baru mesin adalah €425.000, belum termasuk PPN! Catatan: Penjualan ini adalah mesin saudara dari Hamuel Reichenbacher yang baru-baru ini dilelang, dengan spesifikasi yang sama. DETAIL TEKNIS Jarak pergerakan sumbu X1/X2: 2.320 mm Jarak pergerakan sumbu X3/X4: 2.320 mm Jarak pergerakan sumbu Y1/Y2: 1.980 mm Jarak pergerakan sumbu Z1/Z2: 860 mm Rentang putaran sumbu B1: ±181° Rentang putaran sumbu B2: ±181° Rentang putaran sumbu C1: ±361° Rentang putaran sumbu C2: ±361° Kecepatan spindel: 40.000 RPM Pemasangan alat: HSK-E40 Daya spindel: 7 kW Jumlah spindel: 2 Kecepatan pergerakan pada arah X: 90 m/menit Kecepatan pergerakan pada arah Y: 45 m/menit Kecepatan pergerakan pada arah Z: 90 m/menit Jumlah alat: maks. 6 buah Diameter alat pada 4 alat: maks. 40 mm Diameter alat pada 2 alat: maks. 240 mm Panjang alat dari permukaan datar: maks. 270 mm Berat alat: maks. 2 kg Berat total semua alat: maks. 24 kg DETAIL MESIN Pengontrol: Siemens Sinumerik 840D sl Pasokan udara bertekanan Kualitas udara bertekanan: sesuai dengan DIN ISO 8573-1 Tekanan: min. 7 bar Gsdpfjztxczex Aclska Aliran volume udara: sekitar 1.000 Nl/menit Tegangan: 400 V (±5 %) Frekuensi: 50 Hz Koneksi jaringan: 3 fase, kabel netral, dan kabel pentanahan Ketahanan terhadap arus pendek Ic: 17 kA Dimensi & Berat Dimensi (X x Y x Z): sekitar 5.800 x 3.600 x 3.000 mm Berat mesin: sekitar 15,0 ton Jam Operasi Jam spindel spindel 1: 7.872 jam Jam spindel spindel 2: 7.315 jam PERALATAN Konveyor serpihan Probe pengukuran 3D Hexagon Catatan: Detail teknis lebih lanjut dapat dilihat pada penawaran terlampir. Peralatan penjepit dan alat tidak termasuk dalam penawaran.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 15.662 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 620 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 460 mm, model controller: Heidenhain TNC530i, kecepatan spindel (maks.): 12.000 rpm, DETAIL TEKNIS Perjalanan sumbu X: 620 mm Perjalanan sumbu Y: 520 mm Gkodpfx Aozr Nmboclja Perjalanan sumbu Z: 460 mm Sumbu C: 360° Sumbu B: -50° / +110° Diameter meja putar: 500 mm Kecepatan putar spindle (maks.): 12.000 rpm Tipe spindle: SK40 Jumlah spindle: 1 Jumlah slot di majalah alat: 30 DETAIL MESIN Kontrol: Heidenhain TNC530i Jam operasi (sesuai foto) Jam hidup kontrol: 38.569 jam Jam hidup mesin: 37.263 jam Jam spindle: 15.662 jam PERLENGKAPAN Dokumentasi/manual Kecepatan dapat diatur secara stepless Konveyor serbuk (chip conveyor) Konveyor chip tipe sabuk gesek Probing pengukuran benda kerja Sistem pendingin Udara tiup melalui perintah M Handwheel Heidenhain Siklus optimasi kinematik Catatan: Mesin dijual tanpa alat potong, ragum, dan pelat penjepit.

Kondisi: baru, Mesin penggiling untuk penggiling rol tipe CGJ-100, CGJ-120. Panjang pemotongan: 1030 mm, rangka cor, motor: 180W. Pompa pelumasan manual. Gksdpfx Acezqumkelsa

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: 804, Kami menawarkan mesin penggiling roda gigi Sumitomo NPG-2×1000 bekas, tahun pembuatan 1996. Gedpfozn Em Nox Acljka Model: NPG-2×1000 Nomor seri: 804 Tahun pembuatan: 1996 Ukuran Mesin: 4700(L) x 6000(P) x 3600(T) [mm] Berat: 24.000 kg Jumlah Kontainer: 1) Kontainer rak datar 40 kaki x 1 2) Kontainer kering 20 kaki x 1 Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: bekas, Tahun pembuatan: 2013, x-perjalanan 735 mm y-perjalanan 650 mm z-perjalanan 560 mm Kontrol 840D sl FD operate Siemens Kisaran putaran - Spindel utama maks. 18.000 rpm Daya penggerak - Spindel utama 35 / 24 kW Torsi maksimum 119 Nm Tipe koneksi alat HSK-A63 DIN 69893 Diameter meja 680 mm Beban meja maksimum 600 kg Dimensi benda kerja maksimum 650 x 650 x 500 mm dapat dimiringkan +/- 120° dapat diputar 360° Jumlah tempat alat 30 pos. Tipe koneksi alat HSK-A63 Diameter alat maksimum 80 mm Diameter alat maksimum jika posisi tetangga kosong 160 mm Panjang alat maksimum 315 mm Berat alat maksimum 8,0 kg Waktu pergantian alat (span-to-span) sekitar 4,9 detik Kecepatan gerak makan maksimum 40.000 mm/menit Kecepatan pergerakan cepat 40 m/menit Kebutuhan daya total 65 kVA Berat mesin sekitar 11,6 t Kebutuhan ruang sekitar 4,0 x 3,0 x 2,95 m Pusat pemesinan CNC Universal 5 sumbu DMG - DMU 65 FD monoBLOCK - Meja putar miring - tanpa alat - Hanya 8.444 jam operasi - Hanya 2.246 jam spindel - Pendinginan dengan aliran udara melalui tengah spindel - Paket Deckel Maho MDynamics - Paket keselamatan untuk pemadaman listrik - Nozzle pendingin tengah: 7 nozzle udara, 13 nozzle air - Paket tropis (35° - 50° Celsius) - Unit pendingin (ICS) dua tingkat, 40 dan 80 bar Godpfezipzyox Acloka - Penggunaan alat khusus 18kg / 370mm