Beli Vötsch Vcs 7033 bekas (185)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Borken
11.254 km
1
VötschVT 7012 S2
Hubungi
Tahun pembuatan: 2000, jam operasional: 104.382 h, Kondisi: sangat baik (bekas), Vötsch Shock Test Chamber VT 7012 S2
System for Extreme Temperature Changes
The temperature shock test determines the resilience of components, devices, and other products against rapid fluctuations in ambient temperature. Test specimens are subjected to rapid temperature changes in air, with alternating upper and lower thermal loads. These cyclic stress conditions and accelerated aging caused by temperature shifts can reveal weaknesses in the specimens.
Vertical Arrangement of Test Chambers
• Ball screw drive for stable guidance of the specimen basket
• Basket load capacity: 50 kg (VT3 7012 S2)
• Specimens secured by all-round mesh in the basket
• High air recirculation rate ensures short temperature changeover times and uniform temperature distribution within the test chamber
• Warm chamber can be used as a temperature storage unit; cold chamber serves as a temperature cycling unit
• Minimal energy consumption
• No compressed air required
Manufacturer: Vötsch
Model: VT 7012 S2
Type: Temperature Shock Test Chamber
Test Chamber Volume: 120 l
Rated Voltage: 400 V
Rated Power: 10 kW
Rated Current: 25 A
Refrigerant: R452A
Cooling System: Water-cooled
Shock Cooling (Nitrogen cooling) via customer-supplied nitrogen feed
External Dimensions
Width: 930 mm
Depth: 2,115 mm
Height: 1,970 mm
Test Chamber Dimensions
Width: 470 mm
Depth: 650 mm
Height: 410 mm
Degree of Protection
Unit: IP 42
Control Panel: IP 20
Switch Cabinet: IP 54
Performance Data for Temperature Testing in Single-Chamber Operation |
Temperature Range
Warm Chamber: +50°C to +220°C
Cold Chamber: -70°C to +70°C
Temporal Temperature Deviation: ±2 K (at steady state)
Spatial Temperature Deviation: ±2 K (at steady state in basket)
Warm Chamber Heating Rate: 11 K/min
Cold Chamber Cooling Rate: K/min
Cold Chamber Heating Rate: 2 K/min
Warm Chamber Cooling Rate: K/min
Ledpfxjx Exmte Aptjhh
Observation Window: 355 x 355 mm
Tube Feedthrough: 67 mm
Year of Manufacture: 2000
Operating Hours: 104,382
Weight: 1,000 kg
Financing through our bank is available.
komplett-konzept.leasingo.de
More items—new and used—can be found in our shop! International shipping costs available on request!
Iklan kecil
Borken
11.254 km
Ruang uji iklim Ruang uji suhu
Heraeus VötschHC 4055
Hubungi
Kondisi: baik (bekas), Heraeus-voetsch-hu
Lhedpouuilvsfx Aptjh
Iklan kecil
Borken
11.254 km
Ruang uji iklim Ruang uji suhu
VötschVTSR 7034/S
Hubungi
Tahun pembuatan: 2002, Kondisi: baik (bekas), votsch-vtsr-7034s-klimapruefschrank-translation
Lsdpeuuif Nsfx Aptohh

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Borken
11.254 km
Ruang uji iklim yang dapat dilalui, ruang iklim
VötschVSKZ 04/120/S
Hubungi
Tahun pembuatan: 1996, Kondisi: sangat baik (bekas), votsch-vskz-04120s-begehbare-klimaprfkammer
Lhodpfeuuigyex Aptoh
Iklan kecil
Borken
11.254 km
Ruang uji iklim Ruang uji suhu
VötschVC 0150
Hubungi
Kondisi: sangat baik (bekas), votsch-vc-0150-translate-1
Lhedpfx Apsuuikfetoh
Iklan kecil
Dietfurt an der Altmühl
10.982 km
Ruang suhu
VötschVT 7004
Hubungi
Tahun pembuatan: 2003, Kondisi: bekas, 2 unit tersedia
Dimensi (dalam): 320 x 270 x 400 (t) mm
Dimensi (luar): 920 x 800 x 600 (t) mm
Lhsdpfx Ajxyzvdeptjh
Kapasitas ruang suhu: sekitar 35 liter
Rentang suhu: -70°C hingga +180°C
Saluran pipa: 85 mm
Tegangan listrik: 230V +6/-10% 1/N 50Hz
Arus nominal: 10A
Daya nominal: 2 kW
RS232
Tipe: VT 7004
Iklan kecil
Schweinfurt
11.062 km
Ruang uji emisi
VötschVCE 200
Hubungi
Kondisi: bekas, Designation: Emission Test Chamber
Manufacturer: Vötsch
Model: VCE 200
Test Chamber Volume: 200 litres
Temperature Range: +20°C to +130°C
Humidity Range: 30 to 95% RH
Temperature Deviation: temporal ± 0.3 K
Temperature Deviation: spatial ± 0.5 K
Average Temperature Change Rate: cooling approx. 0.3 K/min, heating approx. 0.4 K/min
Dew Point Range: +5°C to 60°C
Humidity Deviation: temporal ± 1 to 3% RH
Voltage: 3/N/PE AC 400V±10% 50Hz
Rated Power / Rated Current: 21 kW / 41 A
Refrigerant: R404A
Internal Chamber Dimensions: 610 x 610 x 560 mm (W/D/H)
Overall Dimensions: 1250 x 1700 x 2350 mm (W/D/H)
Weight: approx. 750 kg
Lhodpoxg Hrqefx Aptsh
Item Condition:
Used item as shown in the photos.
Please contact us if you have any questions.
Shipping:
Quoted shipping costs apply to deliveries within Germany.
Worldwide shipping (please inquire for shipping costs outside Germany)
Sale to commercial customers only, without warranty or guarantee.
Technical data may differ; errors in the description reserved.
Iklan kecil
Wald
11.178 km
Oven pemanas, oven, oven pemanasan awal
VötschVAW 60/100
Hubungi
Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), Vötsch VAW 60/100 Heat Oven Heating Cabinet Furnace
Internal dimensions: 600mm x 1000mm x 600mm (W x D x H)
External dimensions: 1800mm x 1800mm x 2200mm (W x D x H)
Nominal temperature: 650 °C
Year of manufacture: 2017
Nominal power: 20 kW
You are welcome to arrange a viewing.
We are happy to organize cost-effective shipping for you.
Lhjdpfx Apewykz Sotjh
You will receive a proper invoice.
For foreign customers, a net invoice can also be issued, provided a valid VAT ID number is supplied.
Subject to prior sale.
Visit our shop and take a look at our other offers.
The given company names and trademarks are the property of their respective owners and are used only for identification and description of the products.
Deviations from technical data and errors in the item description may occur and are subject to change.
Iklan kecil
Zofingen
11.282 km
Pabrik pengeringan
Vötsch Industrietechnik Vakuum TrocknerVHT 125/170 WW Vacuum Tray Dryer 2.47 m3
Hubungi
Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, 2 units GMP-compliant vacuum drying ovens, Vötsch Industrietechnik (also available separately). Product-contacting material: Stainless steel 1.4435. Heating type: externally heated hollow inserts, top cover also heated, double-walled with internal meander baffles, pressure-tight up to 3 bar. Heating via a separate heating/cooling circuit (indirect heating with hot water) using a separate hot water thermostat.
Lhjdpfx Apjucdqnotjh
Operating temperature: max. 95°C, operating pressure inner chamber: 0 to 1 bar abs.
External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth
Tray dimensions: 1200 mm width x 950 mm depth
Number of trays: 13 pcs
Usable area: 14.8 m²
Weight: approx. 2900 kg per dryer
Connections: hot water supply (flow and return), vacuum connection
Heating of the vacuum drying ovens with a heat transfer medium (e.g. water), connections at the rear. Heating medium temperature controlled by temperature control unit type 95-36-E, rated voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating power can be reduced to 18 kW in a defined temperature range.
Iklan kecil
Jerman
11.248 km
VOORTMAN VCS Thermo
VOORTMANVCS Thermo
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.000 mm, jumlah sumbu: 4, Mesin pemotong plasma 4-sumbu tipe VOORTMAN VCS Thermo ini diproduksi pada tahun 2013. Mesin ini dilengkapi dengan kepala potong chamfer/miring otomatis multi-sumbu dan sumber plasma Hypertherm HPR260XD dengan teknologi Truehole. Mesin ini memiliki konsol kontrol Beckhoff terintegrasi dan perangkat lunak nesting Beckhoff. Jika Anda mencari kapasitas pemotongan plasma berkualitas tinggi, pertimbangkan mesin pemotong plasma VOORTMAN VCS Thermo yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut.
- Konfigurasi kepala potong: Kepala potong chamfer/miring otomatis multi-sumbu
- Sumber plasma: Hypertherm HPR260XD dengan teknologi Truehole
- Kontrol CNC: Konsol kontrol Beckhoff terintegrasi
- Perangkat lunak: Perangkat lunak nesting Beckhoff termasuk dongle keamanan
- Sistem ekstraksi: Sistem filter TEKA Cube
Lhjdpfxezd Abpj Aptsh
- Kondisi filter: Terdapat sedikit kerusakan; akan diperbaiki dan dijual dalam kondisi sepenuhnya berfungsi
- Perlengkapan tambahan: Nozel pemotongan dan dua kepala potong
Iklan kecil
Wiefelstede
11.134 km
Pendingin udara 70 KW
GoedhartVCS-145610
Hubungi
Kondisi: baik (bekas), Pending terjemahan
Lsdpfx Apjb Nx Hmjtohh
Iklan kecil
Przemyśl
10.168 km
MESIN PEMBUAT TAS PLASTIK VAMA VC 600
VAMAVC 600
Hubungi
Tahun pembuatan: 2015, Kondisi: sangat baik (bekas),
Iklan kecil
Jerman
11.248 km
Citizen MIYANO VC-03
CitizenMIYANO VC-03
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 3.888 h, kecepatan spindel (maks.): 8.000 rpm, jarak pergerakan sumbu X: 180 mm, jarak gerak sumbu Z: 200 mm, daya motor spindle: 3.700 W, tinggi total: 1.705 mm, lebar total: 700 mm, berat keseluruhan: 1.500 kg, produsen pengendali: MITSUBISHI, model controller: FCA 70 LPC-V (M70V series), panjang produk (maks.): 1.683 mm, jumlah sumbu: 2, Horizontal lathe from 2017. This Citizen MIYANO VC-03 offers a maximum turning diameter of 45 mm and a turning length of 50 mm. It features rapid traverse speeds of 20 m/min for the X-axis and 30 m/min for the Z-axis, along with a robust spindle speed of up to 8000 rpm. If you are looking for a high-quality lathe, consider the Citizen MIYANO VC-03 machine we are offering for sale. Please contact us for further details.
- Operating hours (Power ON): 8,494 h
- Cutting time / Operating time: 3,888 h
- Number of machined parts: 8,536
- Input voltage: AC 200 V, 3 phases, 50/60 Hz
- Rated power: 11 kVA
- Full load current: 32 A
- Short-circuit interrupt rating: 2.5 kA
- Max. turning diameter: φ45 mm (high-precision air chuck) / φ40 mm (collet chuck)
- Max. turning length: 50 mm
- Max. turning length with loader: 40 mm (fixed: 35 mm)
- Spindle head shape: Ultra-flat
- Max. spindle speed: 8000 rpm (standard: 60 - 6000 rpm)
- Spindle drawtube ID / bar capacity: Ø10 mm
- Number of tool slides: 1
- Slide type: Gang tool, horizontal
- Number of controlled axes: 2 axes (X and Z axes simultaneous control)
- X-axis feed motor: 2.7 kW
- Z-axis feed motor: 5.8 kW
- Rapid traverse speed (X-axis): 20 m/min
- Rapid traverse speed (Z-axis): 30 m/min
- Tool size / Shank size: 20 mm (options: 10, 12, 16)
- Number of tools (standard): 5
- Tool bore diameter: φ20 mm
- Coolant tank capacity: 90 liters
- Coolant pump flow rate: 110 / 145 L/min (50/60 Hz)
- Coolant pump power: 0.18 kW
- Pneumatic air supply pressure: 0.5 MPa
- Lubricant tank capacity: 0.8 liters
- Lubrication pump type: MLZ (delivery volume per stroke: 1.5 – 2.5 ccm)
- Spindle center height: 875 mm
- Loader type: Gantry loader (Type R) – 2 controlled axes, 1 slide, 2 grippers
- Loader max. workpiece size: φ40 x 40 mm
- Loader max. workpiece weight: 250 g
- Loader feed rate (left/right): 108 m/min
- Loader feed rate (up/down): 90 m/min
- Loader drive system: Rack-and-pinion drive
- Optional automation technology, not included: Steyer loading system, singulation unit/loading via conveyor, discharge conveyor with finished parts buffer
Lhjdpozb Idlsfx Aptsh
- Included features: Oscillating cutting (LFV), pneumatic power chuck, tool holder, splash guard interlock, machine light, air blower (tool & spindle), CE specification, coolant level switch, automatic power shut-off, LED warning light
Technical Specification:
- Counter spindle: No
- Driven tools: No
Iklan kecil
Italia
11.248 km
DOOSAN VC 3600
DOOSANVC 3600
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jarak pergerakan sumbu X: 520 mm, jarak lintasan sumbu Y: 360 mm, jarak gerak sumbu Z: 465 mm, produsen pengendali: FANUC, model controller: i Series, beban meja: 500 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 7.500 W, jumlah slot dalam magazin alat: 20, jumlah sumbu: 3, This 3-axis DOOSAN VC 3600 was manufactured in 2018. It offers an X-axis travel of 520 mm, a Y-axis travel of 360 mm, and a Z-axis travel of 465 mm. The machine features a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking for high-quality machining capabilities, you should consider the DOOSAN VC 3600 vertical machining center, which we have available for sale. Contact us for further details.
• Table dimensions: 650 × 375 mm
• Spindle power: 5.5 / 7.5 kW
• Total number of parts (Pezzi Totali): 114,937 parts
• Operating time (Tempo Lav): 858 h 41 min 59 sec
• Cutting time (Tempo Taglio): 3,329 h 25 min 12 sec
• Power-on time (Acceso): 13,604 h 41 min
• Cycle time (Tempo Cic): 0 h 1 min 59 sec
• Documentation: Operating manual and CE declaration of conformity included
Additional equipment
• D’Andrea TRM/50 boring head attachment
• Gerardi vise (345 × 120 mm)
• Chip conveyor system
Technical Specification
Taper size BT 40
Lhjdpjy Uwzbofx Aptsh
Iklan kecil
Italia
11.248 km
Mazak VCS 430A
MazakVCS 430A
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 430 mm, jarak gerak sumbu Z: 510 mm, kecepatan spindel (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 30, jumlah sumbu: 3, Mazak VCS 430A 3-sumbu ini diproduksi pada tahun 2014. Mesin ini memiliki kecepatan spindle maksimum 12.000 rpm dan ukuran meja 900 x 430 mm. Mesin ini dilengkapi dengan CNC Mazatrol Smart dan kapasitas alat 30 posisi. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan pusat pemesinan vertikal Mazak VCS 430A yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut.
Lhedpoy Ncyfefx Aptoh
• Ukuran meja: 900 x 430 mm
Perlengkapan tambahan
• Alat presetting bawaan
• Pendingin melalui spindle (pendingin di dalam spindle)
Iklan kecil
Kraków
10.371 km
Pompa Vakum Gardner Denver V-VC 75
Gardner DenverV-VC 75
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Technical data:
Product number: V-VC 75
Year of manufacture: 2012
Motor power: 2.2 kW
Capacity: 84 m³/h
Maximum vacuum: 0.2 mbar
Noise level: 74 dB
Rotational speed: 1500 rpm
Weight: 90 kg
Dimensions [H x L x W]: 6011 x 281 x 310 mm
The pump achieves a vacuum of 0.2 mbar, as confirmed by the measurement on the sensor in the video attached below.
"2.8 -1" displayed on the sensor means a vacuum of 2.8 x 10⁻¹, which equals 0.28 mbar.
After a major overhaul
Pump in excellent condition
Lodpoy H Swnsfx Aptohh
New oil
New exhaust separators
Oil-lubricated rotary vane vacuum pump—a device used in industrial technology to remove gases (create a vacuum) in a sealed space. Vacuum pumps can be classified by their operating principle as: positive displacement, momentum transfer, ion sorption, ion-getter, molecular, condensation, adsorption, and ion pumps.
The key parameters of vacuum pumps are:
– Ultimate pressure (the lowest pressure achievable by the pump)
– Pumping speed and its dependency on pressure
– Capacity (usually measured in m³ of pumped gas per unit of time)
Iklan kecil
Polandia
11.248 km
TBI VC 1060 HH
TBIVC 1060 HH
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: SIEMENS, model controller: SINUMERIK 828D, tinggi total: 2.800 mm, lebar total: 2.100 mm, beban meja: 1.000 kg, berat keseluruhan: 6.800 kg, kecepatan spindel (maks.): 10.000 rpm, berat alat: 7.000 g, panjang produk (maks.): 2.900 mm, jumlah sumbu: 3, This TBI VC 1060 HH 3-axis vertical machining center was manufactured in 2020. It features an X-axis travel of 1000 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 650 mm. The machine is equipped with a robust table measuring 1100 x 500 mm, with a maximum table load of 1000 kg. If you are looking for high-quality machining capabilities, you should consider the TBI VC 1060 HH vertical machining center we are offering for sale. Contact us for further details.
• Rigid tapping (no compensating holder required)
• Manual handwheel
• Table size: 1100 × 500 mm
• Table load capacity: 1000 kg
• Spindle-to-table distance: 150–800 mm
• Coolant through spindle: 20 bar
• Coolant tank capacity: 330 liters; flow rate: 200 l/min
• Rapid traverse (X/Y/Z): 36 / 36 / 36 m/min
• Positioning accuracy: ±0.005 mm
• Repeatability: ±0.003 mm
• Linear guides X/Y/Z (roller type)
• Telescopic covers for X/Y/Z axes
• Pneumatic counterbalance on Z-axis
• Digital axis drives
• Tool magazine: 24 positions (SK40), double arm
• Max. tool diameter: 80 mm; Max. tool length: 300 mm
• Tool change time: 1.5 s (high-speed double-arm tool changer)
• Spindle temperature stabilization
• Spindle air purge system
• Tool cooling: air and coolant
Ledpfxsyyxqhs Aptshh
• Central lubrication system
• Electrical cabinet air conditioning
• Data interface: V.24 / RS232-C / USB
• Chip flushing system (bottom)
• Total power requirement: 35 kVA
Additional equipment:
• Integrated chip conveyor with container
• Oil separator
Technical specification
Taper size SK40
Iklan kecil
Espelkamp
11.118 km
Pusat pemesinan vertikal
MazakVCS 530C
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 530 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 42 m/menit, pergeseran cepat sumbu Y: 42 m/menit, pergerakan cepat sumbu Z: 42 m/menit, daya nominal (semu): 41 kVA, tinggi total: 2.808 mm, panjang total: 2.880 mm, lebar total: 2.929 mm, lebar meja: 550 mm, panjang meja: 1.300 mm, beban meja: 1.200 kg, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 6.800 kg, jam operasional spindle: 9.271 h, hidung spindel: 150-660, panjang alat: 350 mm, diameter alat: 80 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: konveyor serpihan, Mazak Vertical Machining Center VCS 530C – well-maintained, inspected & ready for operation
For sale is a Mazak VCS 530C vertical machining center in excellent, well-maintained technical and visual condition. The machine has been serviced regularly and is both visually and mechanically in top shape. It is fully functional, inspected, and immediately ready for use.
The Mazak 530C impresses with its premium features, including the 4th axis, which enables precise and efficient machining of complex workpieces for increased flexibility. The automatic door adds convenience and ensures faster setup times and safe operation. Furthermore, the coolant lubrication system (KSS unit) ensures optimal chip removal, resulting in longer tool life and excellent surface finish. Taken together, these features form a comprehensive package aimed at productivity, precision, and reliability.
With our all-inclusive service package, we handle the entire process for you on request—from delivery to commissioning your new machine. This includes unloading, installation, and alignment of the machining center. Afterwards, our experienced service technicians will professionally commission the machine, carry out all necessary functional tests, and ensure your Mazak VCS 530C runs with maximum reliability and precision.
Lhodpfxoy E Hhfj Aptsh
Additionally, we offer customized training for your staff, so you can make optimal use of the machine from day one. Even after installation, we continue to support you—whether with maintenance, technical queries, or future upgrades. Our all-inclusive package means you do not have to worry about a thing—we ensure everything runs smoothly so you can focus entirely on your production.
Optionally, you can purchase extraction systems, attachments, and accessories from us—in particular, high-quality Donaldson extraction systems to make your production even more efficient and cleaner.
Our service commitment:
Quality, expertise, and customer satisfaction are our highest priorities. Our team consists of qualified and experienced technicians who specialize in Mazak and other machines. We are committed to personal service and ongoing support after your purchase. You are also welcome to inspect and test the machine under power at our facility at any time—see its condition and performance for yourself.
With us, you are in the best hands—professional, reliable, and passionate about machinery!
PS CNC Service Germany GmbH & Co. KG
All information without guarantee.
Iklan kecil
Jerman
11.248 km
VOORTMAN VACAM VCS Thermo
VOORTMANVACAM VCS Thermo
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 2.000 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jumlah sumbu: 4, This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting system capable of cutting material up to 70 mm thick. The machine offers a cutting speed range of approximately 0 - 5200 mm/min. If you are looking for a high-quality plasma cutting system, you should consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details.
Lhedpfx Apjyu Th Aotjh
• Working area: 3000 mm (length) x 1500 mm (width)
• Machine design: heavy-duty steel frame construction; gantry design
• Material support: sectional support bed
• Plasma cutting system: Kjellberg HiFocus 280i
• Maximum plasma cutting thickness: up to approx. 70 mm
• Cutting capability (steel): 6 / 12 / 20 / 25 / 30 / 40 / 50 / 70 mm
• Cutting speed range: approx. 0-5200 mm/min
• Positioning speed: approx. 12,000 mm/min
• Positioning accuracy: ±0.1 mm
• Control system: VACAM CNC control
• Software: VACAM Machine Edition; VACAD; VANEST
• Industrial PC: Intel Core 2 Duo; 2 GB RAM; SSD storage; Ethernet port; touchscreen monitor; keyboard; USB ports
• Automatic torch height control: HT4000 PCS
• Laser pointer: Yes
• Electrical connection: 230 V, single-phase, 50 Hz
• Compressed air requirement: operating pressure approx. 6 bar
• Noise level (idle): approx. 70 dB
• Safety features: emergency stop button; emergency stop cable; safety guards
• Material types: steel; structural steel; sheet metal
Additional equipment
• TEKA Filtercube 4H extraction unit (filter system)
Iklan kecil
Hungaria
10.417 km
Vertikal mesin pusat
MazakVCS 530C
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Data Umum
Berat mesin: 6.800 kg
Tinggi mesin: 2.808 mm
Dimensi
Panjang mesin: 2.929 mm
Lodpjx E Edxjfx Aptohh
Meja
Beban meja: 1.200 kg
Penggerak Utama
Jumlah sumbu: 3
Kecepatan spindle: 12.000 RPM
Daya motor spindle: 18,5 kW
Pergerakan
Gerak sumbu X: 1.050 mm
Gerak sumbu Z: 510 mm
Gerak sumbu Y: 530 mm
Peralatan
Bobot maksimum alat: 8 kg
Pusat pemesinan vertikal 3-sumbu Mazak VCS 530C ini diproduksi pada tahun 2014. Mesin ini dilengkapi ukuran meja 1.300x550 mm, perjalanan sumbu X/Y/Z sepanjang 1.050/530/510 mm, dan kecepatan spindle maksimum 12.000 rpm. Mesin ini mampu menahan beban meja hingga 1.200 kg dan memiliki majalah alat dengan kapasitas 30 alat serta waktu pergantian alat cepat 2,8 detik. Manfaatkan kesempatan ini untuk membeli Mazak VCS 530C vertical machining centre. Silakan hubungi kami untuk informasi lebih lanjut tentang mesin ini.
Jenis Aplikasi: Milling
Iklan kecil
Rumania
11.248 km
SPINNER VC 560
SPINNERVC 560
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 410 mm, jarak gerak sumbu Z: 410 mm, tinggi total: 2.500 mm, lebar total: 1.800 mm, beban meja: 250 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 12.000 rpm, berat alat: 5.000 g, panjang produk (maks.): 2.400 mm, This 3-axis SPINNER VC 560s was manufactured in 2007. It is a CNC milling machine with a 3-axis configuration, prepared for a 4th axis (included in the delivery, but not installed). The machine is operational and comes complete with all tools and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, you should take the opportunity to purchase this SPINNER VC 560 vertical machining center. Contact us for further details.
• Condition: Operational; reportedly very low usage
• Control: To be confirmed
• Power supply: 3 x 400 V / 50 Hz
• Total power: 20 kVA
• Compressed air: 6 bar
• Table: 650 x 410 mm; 3 T-slots (14 mm)
• Rapid traverse: 48 m/min
Lodpfsykt T Dox Aptehh
• Tool magazine: 24 positions; max. tool Ø 77 mm (125 mm with adjacent stations free); max. tool length 200 mm; tool change time 1.3 s
• Coolant system: 250 l
• Spindle hours: Unknown (reported as very low)
Additional Equipment
• New 4th axis (included, never installed, unused, still in box)
• Complete tool set included (as shown in the pictures)
• Tool cabinet (as shown in the pictures)
Technical Specification
Taper Size SK 40
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Contamine-sur-Arve
11.428 km
Pusat pemesinan vertikal
MAZAKVCS 530C
Hubungi
Kondisi: bekas, TECHNICAL DATA
- Number of axes: 3
MILLING SPINDLE
- Tool holder: ISO40
- Spindle speed: 12,000 rpm
- Spindle drive power: 18.5 kW
LINEAR AXES
- Travel X/Y/Z axes: 1050 / 530 / 510 mm
- Rapid traverse rate (X/Y/Z): 42 m/min
- Feed rate (X/Y/Z): 1 - 8000 mm/min
TOOL CHANGER
- Tool changer type: Bras chargeur
- Number of tools in magazine: 30
TABLE
- Table size: 1300 x 550 mm
- Max. table load: 1,200 kg
- Distance from table to spindle nose: 150 - 650 mm
ELECTRICAL SUPPLY
- Supply voltage: 400 V
- Total connected load: 41.15 kVA
WEIGHT AND DIMENSIONS
- Required space: 2,880 x 2,950 mm
- Machine height: 2,808 mm
- Machine weight: 6,800 kg
MACHINE HOURS
- Power-on hours: 16,317 h
- Operating hours: 3,904 h
EQUIPMENT
- Control: MAZATROL MATRIX NEXUS 2
- Interface: PCMCIA / RS232
- Electronic handwheel
- 3-color status lamp
- Coolant tank
* with high-pressure pump
- Internal coolant supply (IKZ)
- Chip conveyor
Lhedpfx Aoycxudjptoh
- Tool measuring probe system
- Workpiece measuring probe system
Iklan kecil
Pollenzo
11.341 km
Tempat lem SCM VC 1000
SCMVC 1000
Hubungi
Kondisi: bekas, Ferwood Code: RU0010598 - Manufacturer Code: G042300060 - Condition: Used - Compatible Machine: SCM Edgebander - If interested, we offer overhaul services. Please contact us.
Lsdpfevazhdsx Aptshh
Iklan kecil
Espelkamp
11.118 km
Pusat permesinan vertikal
MazakVCS 530C
Hubungi
Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 530 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 42 m/menit, pergeseran cepat sumbu Y: 42 m/menit, pergerakan cepat sumbu Z: 42 m/menit, daya nominal (semu): 11 kVA, berat benda kerja (maks.): 8 kg, tinggi total: 2.808 mm, panjang total: 2.880 mm, lebar total: 2.929 mm, lebar meja: 550 mm, panjang meja: 1.300 mm, beban meja: 1.200 kg, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 6.800 kg, jam operasional spindle: 16.024 h, hidung spindel: 150-660, panjang alat: 350 mm, diameter alat: 80 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: konveyor serpihan, Mazak Vertical Machining Center VCS 530C – Well-Maintained, Inspected & Ready for Operation
For sale is a Mazak VCS 530C Vertical Machining Center in well-maintained, technically flawless condition.
The machine has been regularly serviced and is in excellent visual and technical condition. It is fully operational, tested, and immediately ready for use.
With our all-inclusive service package, we personally handle the complete service for you upon request – from delivery to commissioning of your new machine. This includes unloading, placement, and alignment of the machining center. Afterwards, our experienced service engineers will professionally commission the machine, carry out all necessary function tests, and ensure that your Mazak VCS 530C runs reliably and precisely.
Furthermore, we offer customized training for your employees so that you can optimize machine usage from day one. Even after installation, we continue to support you – whether it’s for maintenance, technical inquiries, or future expansions.
With our all-inclusive package, you don’t have to worry about a thing – we ensure everything runs smoothly so you can focus entirely on your production.
Ledpexuqrksfx Aptohh
Optionally, you can also acquire extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units, to make your production even more efficient and clean.
Our Service Commitment:
We put quality, competence, and customer satisfaction first.
Our team is made up of qualified and experienced engineers, specialized in Mazak machines as well as other makes.
We place great value on personal support and are happy to assist you even after purchase at any time.
Additionally, you are welcome to view and test the machine under power at our facility at any time.
You are warmly invited to see the condition and functionality for yourself on site.
With us, you’re in the best hands – professional, reliable, and passionate about machinery!
PS CNC Service Germany GmbH & Co. KG
All information without guarantee.
Iklan kecil
Albias
11.856 km
2002 DAEWOO ACE-VC 320
DAEWOOACE-VC 320
Hubungi
Kondisi: bekas, Tahun pembuatan: 2002, Centro de mecanizado DAEWO ACE-VC 320
Ljdpfjupkilox Aptohh
Kami memudahkan pencarian untuk Anda: "vötsch vcs 7033"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan







































































































































































































































































