Beli Berg-Schmid X-Smart 4 bekas (93.821)

Kondisi: baru, Cutting diameter: 240 mm Saw band length: 2730 mm Cutting width: 270 mm Cutting speed: 37 + 74 m/min Saw blade dimensions: 2730 x 27 x 0.90 mm Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangular: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangular: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight approx.: 0.3 t Space requirement approx.: 1.6 x 1 x 1.7 m High-quality metal band saw with 2 band speeds, mitre cut up to 60°, automatic coolant system, and AutoCut feed system – for cutting solid material and profiles. Design features * High-quality manufactured and equipped metal band saw for top-quality cuts * Suitable for cutting solid material and profiles of steel, stainless steel, and aluminium * Mitre cuts up to 60 degrees to the left * Saw band speed adjustable in 2 steps * Frame and gearbox constructed in one casting, very quiet and low-vibration cutting * Easy and clear mitre adjustment with scale * Quick-release vice with quick-clamping lever for easy handling Ksdpfx Anshhzl Hskjdu * Length stop * Saw band guide made from carbide * Electrical monitoring of band tension, band breakage, and saw band cover. The saw will only run if no fault is detected. * Ergonomic industrial handle * Electric automatic coolant system * AutoCut system with hydraulic cylinder, feed regulation, spring package and end switch * Large machine bed * Base frame in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via hydraulic cylinder with continuously adjustable feed and automatic end-stop at end of cut. * Rapid lowering of the saw frame from rest position to the workpiece, then switching to normal feed (e.g. for marking). * Manual mode: The hydraulic cylinder acts as a brake cylinder (e.g. for notching). The brake cylinder allows the saw to be positioned at any point during return stroke.

Kondisi: baru, Cutting range at 90°: round 305 mm Cutting range at 90°: square 260 mm Cutting range at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 – 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirements approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made in one casting, exceptionally quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cutting! • CNC control for optimized workflows Kdsdpfx Aeupw R Aenkeu Entry of various parameters such as quantities and material lengths, automatic groove calculation • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. 1 sawing program with multiple section lengths • Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm. Includes: - Micro-spray device - Leveling elements

Kondisi: baru, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 110 mm Cutting range at 90° (flat): 200 x 88 mm Cutting range at 45° (round): 115 mm Cutting range at 45° (square): 110 mm Cutting range at 45° (rectangular): 150 x 80 mm Total power requirement: 1.5/1.8 kW Machine weight approx.: 0.22 t Dimensions (L x W x H): 0.7 x 0.9 x 1.9 m ATTENTION: SPECIAL PROMOTIONAL PRICE!!! - Mitre cutting left/right 45° Kdsdpod Iin Dsfx Ankou - Head tilting cuts up to 45° (bevel cuts) - Pneumatic double quick-release vices Vices close automatically when lowered - Ball-bearing table - Machine base - Powerful and high-performance - High-quality construction

Kondisi: baru, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400x250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight: approx. 0.99 t Space requirement: approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC Kdoded Iiprspfx Ankou • Mitre left 45°, automatic operation • Mitre left 60°, semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting • CNC control for workflow optimization Enables input of various parameters such as quantities and material lengths, automatic calculation of the cutting kerf • CNC controller for 10 different sawing programs with 99 sub-programs for different lengths and quantities, e.g. one sawing program with a variety of section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, minimum remaining piece 170 mm.

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 8.260 h, Perlengkapan: penggerak semua roda,

Kondisi: baru, Bernardo Universal Lathe Smart 410 x 1000 Pro Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range (16): 45 – 1800 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 3.0 / 4.5 kW Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Weight approx.: 1220 kg Features • Prism bed made from grey cast iron, induction hardened and precision ground • Electromechanical foot brake to minimize auxiliary times • Central, user-friendly control for feeds and threads with leadscrew and feed rod • Modern main spindle bearing with precision angular contact ball bearings • Gears are oversized, hardened, and precision ground • Hardened and ground gears and shafts, also in the feed gearbox • Simple, smooth-running, and precise speed and feed adjustment • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge enables machining of large-diameter workpieces Kdjdjxl Dx Espfx Ankju Scope of Delivery • Prism bed made from grey cast iron, induction hardened and precision ground • Electromechanical foot brake to minimize auxiliary times • Central, user-friendly control for feeds and threads with leadscrew and feed rod • Modern main spindle bearing with precision angular contact ball bearings • Gears are oversized, hardened, and precision ground • Hardened and ground gears and shafts, also in the feed gearbox • Simple, smooth-running, and precise speed and feed adjustment • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge enables machining of large-diameter workpieces

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 5.110 h, Perlengkapan: ABS, penggerak semua roda, * Kubota KX 057-4, Mini Ekskavator * 5 unit tersedia * Tahun pembuatan: 2016 * Jam kerja: 5.110 jam * AC * Sistem penggantian cepat Lehnhoff * 1 buah ember penggali * Berat: 5.500 kg * Pemasangan pipa lengkap * Lebih banyak gambar dan video tersedia melalui WhatsApp Ksdjzurg Aspfx Ankodu * Informasi dapat berubah tanpa pemberitahuan dan penjualan dapat dilakukan sewaktu-waktu.

Kondisi: baru, Saw blade diameter 350 mm Cutting capacity at 90°: round 100 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: flat 100 x 195 mm Cutting capacity at 45°: round 100 mm Cutting capacity at 45°: square 100 mm Cutting capacity at 45°: rectangular 100 x 135 mm Saw blade speed 2800 rpm Total power requirement 1.5 kW Machine weight approx. 250 kg Dimensions (L x W x H) 0.7 x 0.7 x 1.4 m ATTENTION: SPECIAL OFFER PRICE - Mitre left/right 45° - Fixed locking points at main mitre angles Ksdpsupxaxofx Ankedu - Pneumatic double clamping device - Safety motor brake - Complete with mist spray unit and machine base

Kondisi: baru, Bernardo universal centre lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-6 Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Tailstock quill diameter: 50 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight approx.: 1325 kg Features • Fitted as standard with a Delta frequency inverter for high torque in the low speed range and nearly constant speed under load • Stepless speed control, with set speed read out on digital display • Prism bed made of grey cast iron, induction hardened and precision ground • Central, user-friendly control for feeds and threads via lead and feed shafts Kdedjxl Ta Sopfx Ankju • Modern precision main spindle bearings with angular contact ball bearings • Supplied as standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including feed gearbox • Feed and speed adjustment is simple, smooth, and precise • Adjustable tailstock for taper turning, handwheel with fine graduation (0.02 mm) • Removable gap bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. passage ø 135 mm • Travelling steady rest – max. passage ø 65 mm • Foot pedal with braking function, CE compliant • Four position toolpost • Safety cover for 4-way toolpost • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reduction sleeve • 2 centres • Chip guard at rear • Operating tools

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal bandsaw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° and right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece, very quiet and low-vibration cutting • Hydraulically operated, laterally adjustable vice • Guided, high-quality industrial bearings • Heavy-duty vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Support roller (entry side) • Ball-bearing turntable Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid downfeed to the workpiece or direct cutting in case of series cuts 4. Saw blade stops Kdedpfofgyh Ujx Ankeu 5. Raise frame just above the material 6. Open vice

Kondisi: baru, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total connected load: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, frequency-controlled hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single unit, ensures extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Robust vice and machine frame, heavy-duty cast construction • Large machine base • Integrated tool compartment and chip drawer in machine substructure • Cutting monitoring via ammeter • Adjustable feed regulator for cutting pressure • Infeed roller • Ball bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or cut straight away for series cutting 4. Switch off saw band 5. Raise frame to just above material Kodpfxjfn Andj Ankjdu 6. Open vice

Kondisi: baru, Sägeblatt diameter 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangular 180x100 mm Working height 925 mm Kdjdpfjd Iin Ijx Ankju Saw blade speeds 15+30 or 30+60 rpm Total power requirement 1.8/2.2 kW Machine weight approx. 0.44 t Space requirement approx. 0.8 x 1.1 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydro-pneumatic semi-automatic. (20185/20188) · Mitre cuts left 60° and right 45° · Vise with double clamping arm · Robust prismatic guide for the saw head, adjustable dovetail guide · Chip brush · Automatic cooling system · Metal tensioning wheel for maximum power transmission · Heavy-duty, solid cast iron table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lowering to material surface or simultaneous cutting in series operation 4. Stop saw blade 5. Raise frame just above material 6. Open vise MPS Control system: · Stores start/end of cut · Displays power consumption, number of pieces, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price 204 EUR)

Kondisi: baru, en001 Kdsdpfx Ajd Iin Rjnkou

Kondisi: bekas, pendaftaran pertama: 06/2018, Tahun pembuatan: 2018,

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1990, - *Merek: FAMAR S.N.C. Officine Meccaniche - ALBIATE (MI) Italia* - *MODEL: A311 - 15/4* - *SERI: No. 571 - TAHUN 1990* - Kesesuaian: MEI 1990 - Pasal R.233-69 dari undang-undang ketenagakerjaan (pelat Prancis) - Jenis: Mesin penggiling asimetris 3 rol *Karakteristik:* - Panjang efektif: *1500 mm* (15 = 15 desimeter) Kdedpfx Aez E R Ausnkeu - Ketebalan: *4 mm maksimum untuk baja* (15/4 = 1500 x 4) - Rol Ø ~ 110-120mm, baja yang dikeraskan - Bermotor: motor belakang berwarna hijau seperti yang Anda lihat, 2,2kW - Kontrol: panel kontrol terpisah *MAJU / MUNDUR + NAIK / TURUN* (rol bawah dapat disesuaikan) - Berat: *~ 1.250 kg*

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Kedpfjfg E Hljx Ankjdu Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre bandsaw K-tech DG 50/33 HA-I • 2-column mitre bandsaw • Robust yet easy to operate • Material height sensor (automatic cut start recognition) • Smooth operation due to inclined cut, feed regulator and cutting pressure regulator • Heavy-duty material inlet roller • Removable chip tray (can be sanitized) • Energy-saving and low-vibration thanks to inclined cut • Ergonomic, safe, and free-standing control panel • Frequency-controlled sawing drive, 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimension drive wheels (520 mm) each • Clear mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Switch saw on 3. Rapid descent to start of material or commence cut immediately for serial cuts 4. Switch off saw band 5. Raise frame slightly above material 6. Open vice

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ketebalan lembaran (maks.): 4 mm, MESIN PEMOTONG PLAT 4050 X 4 Kdedpfx Aszz Siwenkou MODEL: SC 40/4 PENGATUR MOTOR CERUK 500 PENAHAN PLAT HIDRAULIK TERLIHAT MESIN BEKAS, KONDISI BAIK KODE INTERNAL: SVR 439

Kondisi: baru, Tahun pembuatan: 2026, ketinggian potong (maks.): 150 mm, Rentang pemotongan baja bulat pada 45°: 108 mm, Rentang pemotongan baja bulat pada 90°: 108 mm, BERG+SCHMID double-mitre bandsaw GBS 250 Super AutoCut Speed: 18-110 rpm • Mitre cutting left 60° / right 45° Kdsdpfxor Ik Sqe Ankju • Quick-release, movable vice • Solid, heavy-duty vice and machine casting • Ball-bearing rotary table • Hydraulic brake cylinder • Large, robust material support • Automatic coolant system • Worm gear drive running in oil bath • Enclosed saw frame • Adjustable ball bearing guides • Tool compartment – door in base • Cut monitoring via ammeter • Cutting pressure/feedrate regulator • Support roller (material infeed side) • Machine base (supplied as dismantled package) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via hydraulic cylinder, infinitely variable feedrate adjustment, with limit switch at end of cut II. Rapid descent of the saw frame to workpiece, then switch to normal saw feed (e.g., for notching) III. Hydraulic cylinder works as brake cylinder: a) Manual operation (e.g., for coping cuts) or b) Lowering in idle mode Saw blade dimensions: 2765x27x0.9 mm Further accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: ex stock Waiblingen-Beinstein.

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Harga tersebut adalah untuk semua item. Ideal untuk memulai bisnis baru di bidang Sablon. Cocok untuk studio seni dan para seniman. Paket ini berisi: 1. MESIN SABLON KAROSEL TIPE X, 4 MEJA, DAPAT DIATUR PENUH 2. MESIN PENGERING: DAYA 3 FASE 3. MESIN PEMANAS INSTAN: DAYA 3 FASE 4. 2 SET RAK PENGERING SEMUA BARU, MASIH DALAM KEMASAN ASLI. Kodpfx Aexwnw Ajnkedu

Kondisi: bekas, Brand: GEMINIS Model: CNC 4 PLUS 620 x 2000 Control: FAGOR Distance between centers: 2000 mm Center height: 315 mm Maximum turning diameter: 620 mm Swing over cross slide: 370 mm Bar capacity: 80 mm Precision indexable turret: 1st speed range: 0 to 355 rpm 2nd speed range: 0 to 1800 rpm Tailstock: Morse 6 Main motor: 15 kW Kodswznp Nopfx Anksdu Maximum workpiece weight between centers: 2,560 kg Machine dimensions (L x W x H): 4300 x 1900 x 1800 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.310 mm, lebar total: 390 mm, tinggi total: 40 mm, 120 pcs. shelf panels approx. 131 x 39 x 4 cm, SSI Schäfer R3000, second choice (new goods) – shelving units for workshops, warehouse shelving, hand-storage, boltless shelving, small parts storage B40/392/70, ZB341315, ZB9414 Specifications: - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Quantity: 120 shelf panels SSI Schäfer R3000 - Load capacity: max. 100 kg per shelf panel - Finish: Sendzimir galvanized - Second choice (new goods) (This is a second choice product, new and unused. Second choice means there may be dust deposits, minor scratches, or slight soiling.) - Available ex stock Wietmarschen Price: €960.00 net €1,142.40 gross You will receive an invoice with VAT shown separately. Transport: Kjdpfez T H T Tex Ankedu Delivery is available on request via our partner forwarding company; costs depend on the destination postcode. Assembly: Our trained staff will gladly assist you with the professional assembly and disassembly of your company equipment if required. Our recommendation: Let us know your requirements ... We are happy to support you in realizing your projects – from planning to ordering and assembly.

Tahun pembuatan: 1999, Kondisi: baik (bekas), Driver / Plate Brake / Flying Shear for Slitting Line Strip width: 500 – 1,650 mm Kdsdpfogryl Aox Ankou Strip thickness: 0.4 – 4 mm Number of driver rollers: 2

Tahun pembuatan: 1999, Kondisi: baik (bekas), Driver / Plate Brake / Flying Shear for Slitting Line Strip width: 500 – 1,650 mm Kjdpfx Asgm E Rdenkedu Strip thickness: 0.4 – 4 mm Number of driver rollers: 2

Tahun pembuatan: 1999, Kondisi: baik (bekas), Driver / plate brake / flying shear for slitting line Strip width: 500 - 1,650 mm Strip thickness: 0.4 – 4 mm Kedjgm E Rlopfx Ankodu Number of driver rollers: 2

Kondisi: baru, Cutting diameter: 305 mm Bandsaw blade length: 3,375 mm Cutting width: 350 mm Bandsaw blade dimensions: 3,375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangle: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangle: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 0.7 t Space requirements approx.: 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° left and 45° right - Material height sensor Kodpfx Aeu Dbvtenkodu - Ball-bearing mounted turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic cooling system