Beli Easy Tap Mesin Penguliran Internal bekas (85.612)

Kondisi: bekas, Table drilling and thread cutting machine IXION type BT 15 GL Machine No. Year of manufacture: approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper mount B 16 Thread cutting: from M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Rjdpfxswk Nxqe An Ijcf Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320 - 1600 rpm, 4 steps Motor power: 0.55 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed adjustable via 4-step V-belt drive - Equipped with FAHRION GH 10 tapping chuck - Includes lead cartridge for thread pitch; operation without lead cartridge is also possible - Height adjustment of drill head via hand crank - Column extends downward from the table for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Rjdpfxjh A S Hts An Iocf Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Rodpjuz If Nsfx An Iscf Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, panjang pembubutan: 3.000 mm, kecepatan spindel (maks.): 1.800 rpm, berat keseluruhan: 8.000 kg, diameter chuck tiga rahang: 310 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Setiap penawaran mengikat untuk pengambilan tepat waktu, yaitu antara 11.05.2026 dan 13.05.2026 atau antara 18.05.2026 dan 21.05.2026! SPESIFIKASI TEKNIS Panjang pembubutan: 3.000 mm Tinggi center di atas ranjang: 300 mm Diameter pembubutan di atas ranjang: 600 mm Tinggi center di atas dudukan: 200 mm Diameter pembubutan di atas dudukan: 400 mm Kecepatan spindle: 9 hingga 1.800 rpm Lubang spindle: 110 mm Diameter chuck tiga rahang: 310 mm Diameter steady rest: 200 mm DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 6.000 x 1.400 x 2.000 mm Berat: 8.000 kg PERLENGKAPAN Ekor tetap Holder pahat Multifix Chuck tiga rahang Display digital dua sumbu (SONY) Steady rest Referensi eksternal: Pieper - Lot 57 Redpfx Asym Dcujn Ijcf

Kondisi: bekas, Tahun pembuatan: 1952, de-001 Rsdsyn R Nwspfx An Ijcf

Kondisi: baik (bekas), Made in Germany Minimum economically grindable bore: 6 mm Maximum grindable bore: 50 mm Maximum grinding length: 80 mm Maximum clamping diameter: 235 mm Distance from workpiece spindle axis to table center: 145 mm Workpiece spindle speeds: 640 and 1000 rpm Swivel angle of workpiece spindle box (to one side): 10 degrees Rcodeda A Eiepfx An Ief Maximum table speed, hydraulically steplessly adjustable: 12 m/min Maximum distance between workpiece spindle flange and grinding support: 550 mm Power requirement: approx. 8 kW Net weight of the machine: 2000 kg

Kondisi: sangat baik (bekas), de-001 Rcodpfx Ajylbhxen Ief

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, model controller: SIEMENS SINUMERIK 810, panjang benda kerja (maks.): 830 mm, kecepatan minimum spindel milling: 100 rpm, kecepatan spindle milling (maks.): 4.500 rpm, diameter pemasangan: 78 mm, technical-details-milling-lathe Redpfxsyl U Tuj An Ijcf

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 32 kg, tegangan masuk: 230 V, Automatic internal lubrication – coolant is delivered directly to the core drill, which increases tool life and work quality. STEPPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined. Morse taper MT4 allows installation of various tools such as twist drills, countersinks, reamers, tapping attachments, or hole saws. Powerful high-torque motor with soft start and overload protection ensures reliable operation. Powerful electromagnet securely holds the machine in place during operation. Ergonomic control panel allows quick and intuitive setup of operating parameters. Robust machine construction increases stability and minimizes vibration during machining. Wide range of applications – ideal for industrial, workshop, and service use. Technical Specifications Drilling diameter (core drill): 100 mm Drilling depth (core drill): 100 mm Drilling diameter (twist drill): 38 mm Height adjustment of drill head: 275 mm Max tapping capacity: M32 Spindle speed min.: 50 rpm Rodpeyt I Uujfx An Iecf Spindle speed max.: 800 rpm Speed range – number of steps / stepless: 1. 50 – 110 / 2. 20 – 200 / 3. 200 – 500 / 4. 320–800 Spindle taper: MT4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. base plate: 165 mm Magnetic holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2580 W Voltage: 230 V Width: 330 mm Depth: 430 mm Height: 830 mm Weight approx.: 31.5 kg

Kondisi: siap digunakan (bekas), Mesin bubut L & Z / WEILER CONDOR VS 2 dengan tampilan digital 3-sumbu baru dari bengkel pelatihan - Tampilan digital 3-sumbu "BARU" - Tinggi pusat 165 mm - Diameter putar di atas alas 330 mm - Jarak antara pusat 800 mm - Rentang kecepatan putar 28 - 2800 rpm - Gerak otomatis membujur/ratakan - Lubang spindle - Ekor tetap dengan senter Redjy Ral Ispfx An Iscf - Collet / sistem penjepit cepat termasuk 25 collet - Chuck 3 rahang - Röhm 200 mm dengan rahang balik - Multifix / baru dengan sisipan - Lampu kerja - Tombol darurat / mati - Penghenti alas - Kaki mesin - Dokumentasi Dimensi: P x L x T 2 x 0,8 x 1,6 meter / Berat 900 Kg Kesalahan dan kekeliruan reservasi hak.

Kondisi: bekas, Tahun pembuatan: 1989, de-001 Redpfoxzuzcjx An Iscf

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Clamping diameter for broaching heads: 3 x Ø ___ mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Rcodpfst Dwb Dex An Iof Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a work table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge as well as the feeder. The machine has an integrated coolant system. Comments: The machine is designed for use in series production; for optimal use, a foundation (pit) or optionally a platform is recommended. Broaching heads and push-out devices are available on request. The machine can be inspected at our warehouse.

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1024JT05VL, diameter ulir metrik (min.): 3 mm, diameter ulir metrik (maks.): 16 mm, jangkauan kerja: 2.000 mm, berat keseluruhan: 19 kg, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 500 rpm, kedalaman tenggorokan: 2.000 mm, tinggi meja: 870 mm, lebar meja: 800 mm, panjang meja: 600 mm, Perlengkapan: dokumentasi / manual, VOLUMEC JoyTap 3150 - Tapping Unit M3 - M16 / 50-500 RPM incl. automatic tool lubrication incl. VASTC control for JoyTap – Assisted control for tapping operations 1. NEW ALUMINIUM FRAME with EXCLUSIVE Volumec profile designed for greater rigidity and precision compared to other models 2. Improved articulated arm mechanics for smoother movement and increased power 3. NEW-GENERATION (G2) BRUSHLESS MOTOR offering unmatched performance and reliability 4. INTEGRATED CABLING that does not restrict movement 5. VASTC TOUCH PANEL, the most advanced device on the market for screwing and tapping tasks, updated with new features and programmable torque (Nm) 6. MULTI-DIRECTIONAL HEAD with automatic locking 0-90° for workpiece alignment 7. QUICK-CHANGE COUPLING SPINDLE TAPPING: • AUTOMATIC TAPPING (adjustment of pitch – depth – speed – torque Nm for tool protection) Rodpfx Ansvr U Uno Ijcf • TAPPING with PROGRAMMABLE chip breaking • MANUAL TAPPING (preset speed – torque (Nm) for tool protection) • THREAD COUNTING capability • PROGRAM MEMORY with password protection • Easy PROGRAMMING via INTEGRATED INTERFACE • PROGRAM MEMORY for recurring operations • CONSTANT SPEED AND TORQUE during tapping thanks to rotary encoder WORK TABLE: Size: 800x600 Height: 870 30 mm base made from machined steel, T-slots in the inner compartment

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Profile Thread and Gear Hobbing Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Maximum workpiece diameter over saddle: 250mm Maximum workpiece diameter over bed slideway: 500mm Rsdpfx Ajw Hquxen Ijcf Spindle bore: 102mm Tailstock quill adjustment: 100mm Main motor: 4.0 kW Cross axis (x) feed motor: 4.3 kW Longitudinal axis (z) feed motor: 3.8 kW Electrical Equipment Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic controller for predefined machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard Accessories: • Standard thread milling attachment ApG • Maximum milling diameter: 150 mm • Milling spindle internal taper: Morse 3 • Maximum module for gear hobbing: Module 3 • Smallest to largest tooth count for gear hobbing: 4–50 Options: • Gear hobbing attachment ApFW For hobbing axis-parallel and helical profiles up to module 7 Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4 • Heavy-duty thread milling attachment ApGS For hobbing axis-parallel and helical profiles up to module 5 Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4

Kondisi: baik (bekas), Nomor gudang: 2852 Produsen: Polandia Tahun pembuatan: 1974 Nomor mesin: 33891 Tipe / Model: TUD 50 Jarak antara senter: 2.000 mm Bore spindle: 56 mm Tinggi senter: 250 mm Diameter putar di atas ranjang: 500 mm di atas eretan: 300 mm Rentang putaran: 18 hingga 1.800 rpm Feed memanjang: 0,08 hingga 3,26 mm/putaran melintang: 0,04 hingga 1,63 mm/putaran Daya terpasang: 7,5 kW Aksesori/perlengkapan: Chuck rahang tiga Kondisi: baik Redpfx Aox Uykxen Ijcf Berat: sekitar 3,5 ton Dimensi: 3.500 x 1.150 x 1.600 mm

Tahun pembuatan: 1981, Kondisi: baik (bekas), Manufacturer: National Broach Model: GHC 12" Year of manufacture: 1981 Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Max. face width: 63.5 mm Min./max. module: 1.25–6.35 mm Rcjdpfehad Avjx An Ief Weight: 3.4 t Operation: Internal gear honing

Tahun pembuatan: 1960, Kondisi: bekas, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching stations: 2 units Rjdeui Sbopfx An Iocf The machine is equipped with a 2-station rotary indexing table. The machine has an automatic tool feeder and is designed for manual series production. Tool locking within the pulling bridge and in the tool feeder is carried out via a spring-actuated mechanism (pulling head according to DIN 1417).

Tahun pembuatan: 1959, Kondisi: bekas, Max. Zugkraft: 16 t Max. Hub: 1250 mm Rjdo Rwa Uspfx An Iocf Schnittgeschwindigkeit: 5.6 m/min Rücklaufgeschwindigkeit: 30 m/min

Tahun pembuatan: 1980, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 27 m/min Maximum workpiece diameter: 320 mm Broaching stations: 3 units Weight: 4.8 t Rcsdpfxecdtple An Ief automatic tool feeder hydraulic pull head and end piece holder locking automatic loading device for workpieces up to 100 mm diameter magnetic chip conveyor

Tahun pembuatan: 1956, Kondisi: bekas, nomor mesin/kendaraan: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3,450 kg Machine No.: 1413 General Information / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching positions, in operational condition. Pulling force: 13,000 kg (maximum) Broaching length: 1,200 mm Number of broaching positions: 3 Distance between broaching positions: 100 mm Clamping diameter of pull head: Ø 85 mm Clear width between cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Machine footprint (W x D x H): approx. 1,150 x 1,500 x 3,725 mm (with tool feeder extended) Power supply / Connected load: 380V 50Hz / 7.5 kW Accessories / Special features: The machine's crossbeam is equipped with 3 broaching tool holders; the workpiece table has 1 broaching position (modifiable). The tool clamping system and tool feeder are designed for spring-mechanical locking (DIN 1415). The machine is fitted with an automatic tool feeder; the existing feeder can currently accommodate only 1 tool (central broaching position). Integrated coolant system suitable for cutting oil. Rcedpfx Anedbmgmo Ijf Notes: The machine is in age-appropriate good condition and ready for immediate use. Designed for manual operation in medium batch production. It features an automatic process cycle. For optimal use, a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools available upon request. The machine can be inspected under power at our warehouse.

Tahun pembuatan: 1951, Kondisi: baik (bekas), nomor mesin/kendaraan: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine No.: 1133 General information / technical data: Hydraulic horizontal broaching machine in good operational condition Broaching stroke: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm wide Through bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: Hydraulically stepless adjustable from 2 m/min to 7 m/min Return speed: Hydraulically stepless adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Rjdpfx Ansdcdrpe Ijcf Hydraulic motor: 7.5 kW Accessories / special features: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant/lubricant system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is clean in the areas of the guides and the cylinder. Broaching tools and arbors can be supplied on request. The machine is available for inspection and demonstration under power in our warehouse.

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 25,000 kg Rcsdpfx Asdffzfsn Ijf Broaching length: 2,000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Chuck diameter for broaching heads: 3 x Ø 100 mm Clear width between cylinders (nominal size): 500 mm Clear width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine dimensions (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Currently, the machine is without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously installed (the workpiece sliding table is modifiable). The tool clamping system is equipped with hydraulic locking both in the pull bridge and the feed unit. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still retains its original paintwork. It is designed for use in series production and, for optimal operation, a foundation (pit) is ideally required. Broaching heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1958, Kondisi: bekas, nomor mesin/kendaraan: 1545, en-001 Rcjdpfxeda Ugio An Ijf

Tahun pembuatan: 1964, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2016, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between stations: 380 mm Rcodpfx Ajt Dv I Aen Iof Draw head mounting diameter: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tooling clamping system is designed for spring-actuated locking in the pull bridge and hydraulic-mechanical clamping in the feed unit. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Remarks: The machine is designed for series production use; for optimum utilization, a foundation (pit) is ideally required or optionally a raised platform. Draw heads and extractor needles are available upon request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1960, Kondisi: belum diuji (bekas), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. drawing force: 20 t Max. stroke: 2000 mm Max. cutting speed: 5.6 m/min Max. return speed: 30 m/min Rcodpfx Anshu E Egs Isf Max. workpiece diameter: Ø 300 mm Max. tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray