Beli Herbold Sml 30/50 C bekas (86.691)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 7.672 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0040000281C, panjang pembubutan: 500 mm, kecepatan spindel (maks.): 6.000 rpm, berat keseluruhan: 4.300 kg, model controller: Heidenhain Plus IT DinPlus/TurnPlus V7, Catatan: Penjual dapat menawarkan pembongkaran dan pemuatan dengan biaya tambahan. RINCIAN TEKNIS Panjang putaran: 500 mm Langkah sumbu Y untuk meja silang: ±40 mm Jenis spindel: Motor spindel terintegrasi ISM 52 Plus Daya penggerak: 20/27 kW pada 100/40% ED Kecepatan spindel: 6.000 RPM Pemegang revolver: Revolver disk 12 posisi Sauter Penyangga perkakas: VDI 30, DIN 69880-30 Penggerak perkakas: Sambungan/penggerak sesuai DIN 5480 RINCIAN MESIN Pengendali: Heidenhain Plus IT DinPlus/TurnPlus V7 Sistem penjepit: Perangkat penjepit hidrolik sebagian berongga Diameter dalam tabung penarik: 52 mm Sistem pengukuran: Sistem pengukuran langsung Penggaris kaca: Sumbu X Daya sambungan: 25 kVA Arus nominal: maks. 40 A Sekering: 44 A Tegangan jaringan: 400 V Frekuensi jaringan: 50/60 Hz Tegangan input: 230 V Tegangan output: 24 V Berat: 4.300 kg Jam operasional (sesuai dengan meter) Jam spindel: 7.672 jam Meter ke-2: 22.936 jam PERLENGKAPAN Sumbu C Rem spindel hidrolik Penyangga ekor Konveyor serpihan dengan sistem pendingin Sambungan untuk pemisah kabut oli termasuk sambungan listrik Pistol semprot pendingin Isdpfx Apeztb Adjastk Perangkat pembatas kecepatan terpisah untuk spindel utama untuk chuck dengan kecepatan referensi di bawah kecepatan mesin maksimum Dokumentasi Kotak perkakas untuk revolver disk Ø 30

Kondisi: baik (bekas), Tahun pembuatan: 1994, Ref.-No.: 17540 Manufacturer: ARBURG Model: 270 C 500-100 RUNHOUR Only 100 Year of manufacture: 1994 Clamping Unit Clamping force: 50 tons Opening stroke: 350 mm Tie bar spacing (h x v): 270 x 270 mm Minimum mould installation height: 200 mm Platen size (h x v): 405 x 405 mm Injection Unit Screw diameter: 25 mm Ijdpfoyiz U Tjx Apaotk Injection volume: 67 cm³ Shot weight (PS): 61 g Injection pressure: 2,500 bar Dimensions and Weight Dimensions (L x W x H): 3.3 x 1.5 x 2.0 m Machine weight: 2,400 kg Additional Information: Laboratory machine with exceptionally low operating hours The offered ARBURG 270 C 500-100 was built in 1994 and comes from a university’s training and laboratory department. The machine was not used for serial production, but mainly for training and testing purposes. The control system records only approx. 100 operating hours and merely 867 cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. Additionally, it features an integrated crane system to facilitate tool and component changes. The delivery includes an unused replacement screw with a 15 mm diameter as well as a complete additional plasticizing unit, providing extra flexibility for various applications. Thanks to the extremely low usage, traceable origin, and extensive additional equipment, this machine represents a rare opportunity on the used machinery market.

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), de-to-hu-it-lt-001 Itsdpfxjyddzfe Apaok

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 47.137 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61020607, gaya penjepit: 1.300 kN, jarak antara tiang: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax notice and benefit for used machinery: As of July 1, 2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth booster (Section 7 (2) EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower, 2-color, 2-component machine Control: MC6 Year: 2014 Machine No.: 61020507 Operating hours: 47,137 h Complete service record for the past 7 years / 25,000 h of operation 1st injection unit 750 horizontal Injection unit/screw: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating power: kW Heating zones: 5 Iedpfx Ajyf Uy Uepastk Nozzle stroke: mm Injection pressure: 1892 bar 2nd injection unit 180 vertical Injection unit/screw: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2500 bar Clamping unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. platen spacing: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – Full machine data sheet attached as PDF Nozzle side: needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Water circuit BGS: 6 zones each on nozzle and ejector side BluePower technology – up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripherals shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck, or free delivery to location against reimbursement of freight costs. Information about the company and our machines: - We only sell machines purchased from running production, stored at our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All offered machines come from successful companies where maintenance and care are standard practice - All available machines can be viewed in our warehouse.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, 1 Itodpfx Aezc Nwpspask

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Kami menawarkan mesin pemotong pelat Amada Promecam ITS 50-20 yang kondisinya sangat baik ini, buatan tahun 1989. Ijdpjzp Siaefx Apaotk Produsen: Amada Promecam Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Tahun pembuatan: 2022, Kondisi: bekas, nomor mesin/kendaraan: B2212/041, Wavelengths, marking head aperture and orientation, IP protection classes, laser power, and much more can be configured precisely to your requirements. Flexibility is a core component of these lasers. With marking speeds of up to 2,000 characters per second and line speeds up to 900 meters per minute, the CO2 marking lasers are ideally suited for marking both simple and complex content on a wide range of materials—including paper, cardboard, coated metals, glass, and many plastics. This flexibility makes the C-Series lasers the optimal partner for laser marking applications across various industries: from automotive parts and electronic components to plastic items, cables, and more. Whether you need static or dynamic product marking, with simple date codes or complex graphics, the C-Series provides an economical solution for your part identification needs. Aside from a lower laser output, which is optimized for moderate line speeds or stationary marking, the C.0102 offers all the features and benefits that also distinguish the C.0302. The latter is particularly well-suited for high-speed dynamic marking (of up to 150,000 products per hour) or for demanding materials, such as certain plastics. The FOBA C.0303* delivers high-quality laser marking at an affordable price. Its 30-watt output makes it especially suitable for straightforward identification applications in the electronics and automotive supplier industry. It can accurately mark different materials including plastics, resins, glass, ceramics, wood, paper, and cardboard. Itodpfoym N Ipjx Apajk With its compact one-box design, the C.0303 can be quickly and seamlessly integrated into existing production lines. The intuitive FOBA Go user interface allows for easy operation without extensive training. This makes the laser particularly attractive for companies requiring high-quality markings without compromising on efficiency or cost.

Tahun pembuatan: 1988, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Penawaran ini mencakup: Konveyor masuk merek Herbold Detektor logam merek S&S Itsdpeygv Uijfx Apask Mesin penghancur merek Herbold dengan keranjang saringan 8, 10, dan 12 mm Kipas hisap 7,5 kW dari Hardox Instalasi penghilangan debu dengan siklon dan rotary valve untuk pemisahan partikel halus dari hasil gilingan Kipas konveyor untuk pengisian Big Bag Stasiun Big Bag untuk dua Big Bag dengan pengalihan pneumatik Panel kontrol dengan sistem perlindungan kelebihan beban

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7 / 8939 / 05 / 21, 1 Iedpfx Apew Np Tksajtk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: 319009703, Fungsionalitas: berfungsi sepenuhnya, tersedia dalam waktu singkat, garansi 12 bulan Dilengkapi dengan sistem keamanan untuk bahan yang mengandung pelarut sesuai dengan DIN 1539! 3 laci beban berat dengan kapasitas beban masing-masing 123 kg, laci tarik penuh! -Dimensi internal p x l x t 1000 x 1000 x 1500 mm -Dimensi eksternal p x l x t 1765 x 1425 x 2615 mm -Volume 1500 liter -Tmax 250°C -Pengontrol JUMO Imago 500 -Jumlah pelarut yang diizinkan pada Tmax 250 g: 46 g -Laju aliran udara buang: 6 m³/menit -Peralatan tambahan: 3 rak kisi yang dapat ditarik keluar, beban berat, kapasitas beban maksimum 123 kg per rak 1 lembaran serpihan yang dapat ditarik keluar di bagian bawah, tersedia 1 lubang, misalnya untuk termokopel Itodpfx Apezivlreaok -Daya sambungan 26 KW -Berat sendiri 1250 kg -termasuk dokumentasi, pernyataan CE Kami dengan senang hati menawarkan layanan pemasangan dan pengoperasian. Inspeksi dapat dilakukan di gudang kami dengan perjanjian sebelumnya. Kami menjual tungku industri baru dan bekas. Silakan hubungi kami! Tungku, tungku industri, tungku pengering, tungku pembakaran, tungku pemanas, lemari pemanas, tungku industri, tungku konveksi, pengering ruang konveksi, tungku pemanasan awal, tungku pemanas, tungku penemperan, lemari pengering, tungku ruang, tungku pembakaran, lemari pengering konveksi, tungku konveksi, tungku pelarut, pengering ruang, pengering cat

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of manufacture: 2008 Gravimetric dosing and mixing unit, designed for direct mounting on the inlet flange of a plastics processing machine. The unit enables dosing and mixing of up to 4 granular components. Actual, measured, and weighed quantities are continuously compared with set values using a modern microprocessor-based control system, ensuring very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: - 2 feeding hoppers for virgin material or regranulate/virgin material - 2 feeding hoppers for premixes or additives - 2 pneumatically controlled conical dosing heads - 2 precision motor-driven dosing screws - Material hoppers – capacity approx. 7 liters - Weighing hopper – capacity approx. 0.8 liters - Mixing hopper – capacity approx. 3.0 liters - Manually operated slide valve - GRAVInet controller with color touch panel, allowing recipe, regrind, and process data management, vibration compensation, and continuous self-optimization; built-in Ethernet port and standard reporting/printing functions Technical specifications: Average throughput: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Ijdpfxswm Ii Tj Apastk Compressed air: 6–8 bar, oil and water free Weight: approx. 60 kg ✅ Material loaders from Piovan, as shown in the photos, are included in the sale.

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Here we offer you a Heraeus Vötsch temperature test chest. Vötsch Temperature Test Chest / Test Chamber VLM 3068/S, air-cooled (top-loading material testing chambers) Control Panel: The control panel is mounted on a console on the temperature test chest. All control and operation commands can be triggered by simply touching the function symbols. The operating manual for the control panel is included. Main Switch: The main switch is located at the front of the temperature test chest. Air Handling Compartment: The air handling compartment is located inside the test chamber and contains the modules required for temperature regulation. In this compartment, the air is conditioned (cooled/heated) and circulated by the test chamber fan. Air is drawn in at the center of the side wall and, through the air baffles, re-enters the test chamber along the longitudinal sides. Feedthroughs: The temperature test chest can optionally be equipped with feedthroughs, allowing cables and testing devices to be routed into the test chamber. Feedthroughs: front 2 x 82 mm ∅, rear 1 x 85 mm ∅ Internal dimensions: Width 2,000 mm, Depth 570 mm, Height 600 mm External dimensions: Width 3,000 mm, Depth 870 mm, Height 1,060 mm Ijdpfxszgbmie Apastk Technical data: Mechanical load capacity: Max. load with test material (evenly distributed across chamber floor): 600 kg Point load: 50 kg Data for temperature tests: Temperature range: -30 °C to +125 °C Temperature deviation over time at chamber center: ±1 K Rate of temperature change: Heating approx. 1 K/min Cooling approx. 2 K/min Operating data: Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 3 kW, Rated current: 9 A Customer-side fuse: 16A slow-blow Temperature test chest VLM 3068/S Test chamber volume: approx. 680 l Weight: approx. 700 kg Refrigerant: R-404A Noise measurement: Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (see picture) ( Changes and errors in technical data 및 information reserved!) If you have further questions, we will be happy to answer them for you by phone.

Kondisi: bekas, Tahun pembuatan: 2009, Perjalanan sumbu-X: 2.360/2 x 930 mm Perjalanan sumbu-Y: 600 mm Perjalanan sumbu-Z: 600 mm Luas permukaan meja: 2.750 x 600 mm Pengendali: Siemens 840 D Kecepatan spindel: 30 - 6.000 RPM Dudukan perkakas: SK 50 Jumlah posisi perkakas: 26 Jam operasi: sekitar 50.884 jam Daya terhubung: 69 KVA Berat mesin: sekitar 20 ton Menurut perkiraan kami, mesin ini dalam kondisi bekas yang baik dan dapat diperiksa saat beroperasi setelah perjanjian dibuat. Fitur teknis & aksesori: - Roda tangan, Heidenhain HR 410 - Konveyor serpihan - Sistem filter sabuk eksternal Aksesori, perkakas yang ditampilkan, dan alat penjepit hanya termasuk dalam cakupan pengiriman jika disebutkan dalam informasi tambahan. Itjdjzqgh Hepfx Apaek Perubahan dan kesalahan dalam data dan spesifikasi teknis dicadangkan!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, VIDEO TERSEDIA JIKA DIMINTA MESIN BOR DAN FRAIS HORIZONTAL TIPE MEJA CNC UNION CBFK 130/2 Produsen: UNION Gera (VEB Werkzeugmaschinenfabrik UNION Gera) Model: CBFK 130/2 Pengendali: Heidenhain CNC Jenis mesin: Mesin Bor dan Frais Horizontal Tipe Meja CNC Rentang Pergerakan Sumbu X: 3.000 mm Sumbu Y: 1.600 mm Sumbu Z: 1.275 mm Sumbu W (spindle quill): 400 mm Sumbu B (meja putar): 360° Meja Itedpfxjzqbg De Apaok Ukuran meja: 1.600 × 2.000 mm Berat benda kerja maksimum: 7.000 kg Penggerak Utama Motor spindle utama: 32,4 kW Data Kelistrikan Beban terhubung: 80 kW Tegangan suplai: 380 V Frekuensi: 50 Hz Tegangan kontrol: 220/24 V Tegangan tambahan: 220/15 V Arus mesin terukur: 150 A Sekering yang direkomendasikan: 200 A Suhu pengoperasian: 15–35 °C Berat Mesin Perkiraan berat mesin: 28,3 ton Tahun Awalnya diproduksi: (tidak tertera pada pelat) Perbaikan umum: 2007 Identifikasi Mesin Model: CBFK 130/2 Nomor seri: 12266 Jam Pengoperasian (Heidenhain) Pengendali aktif: 112.694 jam Mesin aktif: 100.869 jam Waktu program berjalan: 22.209 jam Waktu spindle berjalan: 18.280 jam

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 5.379 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: E08Y50039, diameter putar di atas sled silang: 300 mm, panjang pembubutan: 500 mm, diameter pembubutan: 480 mm, kecepatan spindel (maks.): 4.500 rpm, tinggi total: 1.700 mm, panjang total: 2.800 mm, lebar total: 1.400 mm, berat keseluruhan: 3.100 kg, Diameter batang (maks.): 52 mm, Perlengkapan: dokumentasi / manual, Monforts TNC 300 CNC Turning Machine | Year: 2009 | Fanuc 0i-TC | 4,500 rpm | VDI 30 Power-on Hours: 15,030 Feed Rate Time: 5,379 For sale is a Monforts TNC 300 CNC turning machine, year of manufacture 2009, equipped with a Fanuc 0i-TC control system. The machine comes from ongoing production and was replaced due to a new investment. It is in a well-maintained, fully operational condition. Original documentation is available. Technical Data Manufacturer: Monforts Werkzeugmaschinen Model: TNC 300 Year of Manufacture: 2009 Control: Fanuc 0i-TC Spindle Mount: ASA A2-6 Spindle Bore: 52 mm Max. Spindle Speed: 4,500 rpm Main Spindle Power: 11 kW (15 kW peak power) Main Spindle Torque: up to 124 Nm Direct drive spindle Tool turret: VDI 30 10 tool stations (optionally 12) Kitagawa 8" power chuck Includes both hard and soft top jaws Manual tailstock Quill diameter: 65 mm Quill stroke: 50 mm Quill taper: MT4 Rapid traverse X/Z: 30 m/min Hydraulic tank: approx. 50 l Coolant tank: approx. 140 l Working Area Max. turning diameter over bed: approx. 480 mm Itedpfx Apozd Dyyjajk Max. turning diameter over carriage: approx. 300 mm Max. turning length: approx. 500 mm Bar capacity: 52 mm Machine Dimensions Length: approx. 2,800 mm Width: approx. 1,400 mm Height: approx. 1,700 mm Weight: approx. 3,100 kg Equipment Fanuc 0i-TC CNC control Kitagawa power chuck Tailstock VDI 30 tool turret Hydraulic unit Coolant system Operating Manual and Technical Documentation The Monforts TNC 300 is a compact and robust CNC turning machine with the proven Fanuc control system. Thanks to the high spindle speed of 4,500 rpm, VDI-30 turret, and tailstock, it is suitable for both single-part and series production. Inspection and functional test can be arranged by appointment.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 39.000 h, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 420 mm, jarak gerak sumbu Z: 380 mm, tinggi total: 5.600 mm, panjang total: 9.000 mm, berat keseluruhan: 6.000 kg, model controller: Heidenhain Mill Plus IT, For sale is a 5-axis machining centre of the DMU brand, model 50 eVolution. Of particular note is the GMN high-frequency spindle HCS 30,000/15 and the 92-position tool changer. The machine is in good condition and fully operational. Technical data: Year of manufacture: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx. 500 mm diameter Travel range: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360° Tool holder: HSK 50 Spindle speed: max. 30,000 rpm Frequency: 500 Hz Power: 15 kW Tool positions: 92 NO chip conveyor Space requirement as per drawing: 9,000 x 5,600 mm Transport dimensions: 2,800 x 3,700 x 2,800 mm Weight: 6,000 kg Upon request, transport and loading can be organised throughout Europe for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Fzho0bc Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Iedpstyit Eefx Apastk For further information or to contact us, please visit our website.

Tahun pembuatan: 1991, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 520 kg, The pump was operated on a test bench and has only very few operating hours. Flow rate: 400 m³/h (111 litres/second) Delivery head / Pressure: 19 m / 1.9 bar Pump speed: 1450 rpm Required NPSH: 3.83 m Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced to 264.5 mm (maximum Ø 269 mm) Shaft seal: single-acting mechanical seal Seal manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: rolling bearing Lubrication: grease Materials Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: cast iron EN-GJL-250 Isdpfx Ajrfdttopastk Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 200 Discharge nozzle nominal diameter: DN 150 Nominal suction pressure: PN 16 Nominal discharge pressure: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Base plate: painted cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 rpm Frequency: 50 Hz Rated voltage: 380 / 660 V Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Power factor (cos phi): 0.82 Dimensions: Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de-1 Itsdpfx Ajy I A Rnjpajk

Tahun pembuatan: 2005, Kondisi: bekas, as new from stock clearance, appears unused Machine No.: RC 08 05 4402 Rated Power: 75 kVA at 20% duty cycle Primary: 500 V Frequency: 1000 Hz Secondary: 8.4 V Secondary short-circuit current: 23.7 kA Ijdpfx Aodq E Hxopajtk Weight: 86 kg

Kondisi: baik (bekas), Various standard and driven tool holders in different versions for VDI 20 + 30 + 40 + 50 + 60 Itsdpobql T Esfx Apaek Please state the required VDI size in your enquiry! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TS 62, S.P.D. meja magnet sinus 300 x 150 mm, elektro permanen 400V Itodsw T Rkfepfx Apajk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: 34368, Fungsionalitas: berfungsi sepenuhnya, daya: 15 kW (20,39 hp), tegangan masuk: 400 V, arus masuk: 40 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, gaya penekanan: 170 t, panjang langkah: 200 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 100 mm/dtk, panjang meja: 3.050 mm, tinggi meja: 950 mm, kedalaman tenggorokan: 400 mm, panjang pelat penekan: 3.050 mm, tabel jarak ke piston: 400 mm, jarak antara tiang: 2.600 mm, kapasitas tangki oli: 350 l, Perlengkapan: Penandaan CE, penghadang cahaya keselamatan, Mesin pelipat hidrolik LVD PPEC-5 170/30 Touch Tahun pembuatan: 2008 Nomor seri: 34638 Spesifikasi teknis Gaya: 1700kN Panjang kerja: 3050mm Jarak antar tiang penyangga: 2600mm Langkah: 200mm Jarak antara meja dan ram: 400mm Celah: 400mm Lebar meja: 150mm Kecepatan pendekatan: 100mm/s Kecepatan kerja: 10mm/s Kecepatan kembali: 100mm/s Berat: 11000 kg Motor: 15kW Sistem kontrol CNC COMMAND CONTROL CNC TOUCH LITE, 5 sumbu Y1 Y2 X R V • Sumbu V pada meja PP8170 • Jangkauan sumbu X: 600mm • Tanda CE “PP3580” Isdpezl Uchofx Apaetk • Sistem penjepit Toptool Eurotstyle, 15 buah • Pengukur belakang X-R duo PP8098 • 2 penyangga depan • 2 penjepit pada pengukur belakang

Kondisi: bekas, Tahun pembuatan: 2021, model controller: , _____ Deskripsi: TruBend Center 5030 :- Rangka mesin yang kokoh :- Penggerak langsung sudut :- Sistem pembengkokan (Crowning) :- Kontrol mesin dengan antarmuka sentuh :- Pemrograman TecZone Fold – Lisensi mengambang :- Manipulator 2 sumbu dengan modul vakum :- Penahan belakang 5 sumbu :- Asisten sudut optik :- ToolMaster :- Alat penekan :- Alat pembengkok OBW90 dan UBW90 Data Teknis Kedalaman pembengkokan minimum (alat standar): 145 mm Kedalaman pembengkokan minimum (dengan alat penekan tambahan): 40 mm Panjang pembengkokan maksimum: 3.123 mm Panjang pembengkokan minimum: 80 mm Gaya penekan: 101 ton Tinggi kotak maksimum: 220 mm Ketebalan material minimum: 0,4 mm Ketebalan material maksimum (baja): 3 mm Ketebalan material maksimum (baja tahan karat): 2,2 mm Ketebalan material maksimum (aluminium): 4 mm Kecepatan cepat sumbu Y (balok penekan): 250 mm/s Penahan belakang 5 sumbu: 1.700 mm/s ToolMaster Bend: 2.400 mm/s Dimensi dan berat: 6.500 x 3.150 x 2.995 / 26.000 kg Perlengkapan :- ACB Laser :- Pemindai kode 2D DMC Bluetooth Ijdpezt Ez Rofx Apaotk :- Set modul vakum 3 sisi (12 buah) :- Konsol penyangga (2 buah) :- Fungsi alat penekan tambahan (ENW) :- Fungsi alat pembengkok tambahan (ZBW) :- ENW110-50 – Panjang 3.123 mm :- ZBW400 – Panjang 940 mm

Kondisi: bekas, Tahun pembuatan: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Itodpfjw Hwthox Apajk

Kondisi: baru, Tahun pembuatan: 2025, Combination metal detector and checkweigher. Equipped with two rejection modules to determine whether the product contains metallic contaminants and/or meets the target weight. Stainless steel frame. - Specifications: Detection speed: 0.2-0.75mm/sec; Detection sensitivity: FE from Ø 1.0mm, SUS from Ø 2.0mm; Target weight accuracy: ±0.5g; Tunnel size (WxH): 330x150mm; Max. product size (WxH): 280x110mm; Max. product weight: 5-990g; Power: 220V/0.35kW; 50Hz/60Hz; Dimensions and weight: L1700xW600xH900mm, 160/260kg. Isdpov Nm Hwofx Apaotk Please note that our new prices are often lower than typical used equipment prices. Feel free to inquire and tell us your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at around 3 weeks. – All machines are sold with a full warranty.