Beli Kellenberger 1000 U-175 bekas (49.218)

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. Ncodpfov Dxxzsx Adiow The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight approx. 3 t Ncedpfot Ii Rrjx Adiew High-End Kellenberger 1500U Ideal for spindle manufacturers or spindle overhaul specialists - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when in position A quantum leap in safety technology - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of spindle speeds - Swivel angle display – upper table - Swivel angle display – wheel head - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine has already been delivered. An identical machine can be assembled with additional options. At present, the machine does not comply with the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The determination of the necessary minimum protective measures must be established through a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. Nsdpfx Asvq R Uzsdiocw The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Ncedpfx Aded Ih D Ejisw Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left grinding wheel 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR control system and BEMA cylindrical grinding interface. Nedpfx Ast Ii Rfodijcw Fitted with a new, maintenance-friendly enclosure. Completely overhauled according to Kellenberger inspection protocol.

Kondisi: baru, Tahun pembuatan: 2025, Diatomit-Brecher und Reinigungsmaschine Nodjq Nx E Sspfx Adijcw Nach dem Reinigungsprozess beträgt der Reinheitsgrad weißer Diatomit mit einem SiO2-Gehalt von über 90 %, Al2O3 unter 0,04 % und Fe2O3 unter 0,4 %.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Data Teknis – Informasi Umum 1. Pabrikan: ENGEL 2. Model: DUO 7050 / 1000 3. Kontrol: CC200 4. Tahun pembuatan: 2007 5. Jam operasional: 100.145 jam Unit Penahan 1. Gaya penjepit: 10.000 kN (1.000 ton) 2. Jarak antar batang pengikat (H × V): 1.400 × 1.150 mm 3. Ukuran pelat (H × V): 1.850 × 1.810 mm 4. Tinggi cetakan (min./maks.): 578 – 1.678 mm 5. Langkah pembukaan: 2.100 mm 6. Jarak bebas (EBH): 1.000 mm 7. Sentrisasi (pelat tetap/bergerak): Ø 250 mm Perlengkapan Unit Penahan 1. Core pull: 2. Pelat tetap: 3 3. Pelat bergerak: 3 4. Katup udara: 5. Pelat tetap: 1 6. Pelat bergerak: 1 7. Sistem penjepit cetakan magnetis: Ya Berat Maksimal Cetakan 1. Berat total maksimal cetakan: 21.000 kg 2. Berat maksimal cetakan pada pelat bergerak: 14.000 kg Unit Injeksi 1. Diameter ulir: 105 mm 2. Volume injeksi: 4.160 cm³ 3. Tekanan injeksi spesifik maksimal: 2.090 bar 4. Kapasitas plastifikasi (PS): 112 g/s 5. Kecepatan maksimum ulir: 150 rpm 6. Penggerak ulir: elektrik 7. Permukaan ulir: diperkuat dan dinitridasi 8. Silinder: Bimetal M3 Nozzle 1. Diameter bukaan nozzle: 8,0 mm 2. Radius nozzle: R35 mm Ncedpfxey Ukfmj Adisw 3. Kedalaman masuk nozzle: 50 mm 4. Diameter luar maksimal nozzle: 60 mm KUKA robot dengan 6 sumbu

Kondisi: siap digunakan (bekas), Spindle bore: 60 mm Swing over bed: 500 mm Ncsdpfxeiqtzke Adisw Centre distance: 1000 mm Dimensions: 3100 x 1400 x 1600 mm

Kondisi: sangat baik (bekas), Setelah perbaikan pada tahun 2022. Ayunan: mm 400 Jarak antara senter: mm 1000 Ncsdjyzpycopfx Adiew Batu gerinda (diameter x lubang x lebar): mm 500 x 80 x 203 Tirus pada spindle: Morse 5 Berat maksimal benda kerja di antara senter: kg 300 Putaran spindle gerinda: rpm 1720, 1980 Gerakan melintang spindle gerinda: mm 415 Daya motor: kW 9,5 Daya total yang dibutuhkan: kVA 16 Dimensi mesin: Panjang: mm 4890 Lebar: mm 2320 Berat mesin: kg 5150

Kondisi: baru, Tahun pembuatan: 2026, Essential filter kit for oil change in CORMAK screw compressors – suitable for the following models: LUFT 1000 / LUFT 1000 COMPACT / THEOR 10-10 Oil Filter: Crucial for maintaining the cleanliness of the lubricating oil circulating within the system. It removes impurities and metal particles generated by normal wear. Clean oil ensures proper lubrication and cooling of moving components, and extends the lifespan of the oil separator. Purpose: Removal of contaminants from lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, extended oil life. Air Filter: The first line of defense for your compressor. Efficiently traps solid particles, dust, and environmental contaminants before they enter the screw block. A clean air filter prevents wear on compression components and minimizes the risk of contamination of the oil and finished compressed air. Purpose: Protection of the screw block and the rest of the system from environmental contaminants. Benefits: Increased compressor service life, maintained efficiency, lower energy consumption. Oil Separator Filter (Separator): A key component of an oil-injected compressor, its job is to separate oil droplets from compressed air. A high-quality separator ensures minimal oil carryover in outgoing air, which is critical for the protection of pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieving high-quality compressed air by effectively removing oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable operating pressure. Ncjdpfx Asycf Hmodiew Why Choose Our Filters? Full Compatibility: These filters are precisely matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Utilization of filter media with high surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to OEM parts. Take care of your CORMAK compressor today!

Kondisi: baru, Tahun pembuatan: 2026, Complete set including LUFT 1000 rotary screw compressor with inverter, vertical compressed air tank with accessories (capacity 270 L), and IZBERG N10S dryer. The LUFT series rotary screw compressor by the Polish brand CORMAK features state-of-the-art solutions in pneumatics, utilizing high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. LUFT 1000 INVERTER Technical Specifications: - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Air delivery 0–6 bar: 990 L/min - Air delivery at 6 bar: 950 L/min - Air delivery at 8 bar: 950 L/min - Air delivery at 10 bar: 930 L/min - Outlet connection diameter (G): 1/2'' - Dimensions: 810 x 610 x 850 mm - Weight: 160 kg IZBERG N10S Air Dryer Technical Specifications: - Inlet/outlet pipe diameter (BSP): 1'' - Max operating pressure: 10 bar - Max inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Capacity: 1500 L/min - Power: 0.58 kW - Supply voltage: 230 V - Dimensions (L x W x H): 380 x 600 x 625 mm - Weight: 31 kg - Refrigerant type and quantity: R134a, 400 g CORMAK vertical air receiver, 270 L, 11 bar working pressure – a reliable solution for compressed air storage in industrial facilities, workshops, and pneumatic installations. The robust steel construction, full compliance with EU directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimized design and high pressure resistance, the receiver can function as both a storage buffer and a stabilizing element for compressor operation. Key advantages of the CORMAK 270 L air receiver: - Professional pressure vessel design – manufactured from premium-grade, 4 mm thick steel, resistant to pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - 11 bar working pressure – suitable for most pneumatic systems, including those with increased demands. - High capacity – 270 liters – ensures stable supply to pneumatic installations and reduces compressor start frequency. - Multi-connection system – five connection points in 1.1/4'', 2'', and 1/2'' diameters enable flexible integration with different setups. Nodjxazlrepfx Adiscw - High quality finish – durable anti-corrosive coating inside and outside the tank. - Universal installation position – vertical design allows space-saving installation in your facility.

Kondisi: baru, Tahun pembuatan: 2026, LUFT 1000 COMPACT Screw Compressor with integrated refrigerated compressed air dryer. The CORMAK LUFT series rotary screw compressor, manufactured in Poland, features the latest advancements in pneumatics combined with high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust design, and high device efficiency ensure reliable and trouble-free performance. Innovative design: Our compressors are built on advanced engineering and European precision craftsmanship. The sturdy construction, enhanced with modern components, guarantees long-lasting, trouble-free operation in any working conditions. Integrated refrigerated dryer: The COMPACT version incorporates a space-saving, all-in-one solution. The built-in refrigerated dryer ensures dry, clean air, protecting your system against corrosion and damage. Silent operation & comfort: Designed with attention to detail, our compressors stand out for their exceptionally low noise levels. Effective soundproofing systems and vibration reduction provide a comfortable work environment, enhancing operator concentration and well-being. Intelligent control: The intuitive MAM electronic control panel serves as your compressor’s command center. It enables precise monitoring of parameters, maintenance scheduling, and rapid diagnostics, ensuring stability and protection of key components. Adaptable to your needs: We understand every application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect match to the specific requirements of your sector. Dynamic working pressure: Automatic pressure adjustment ensures the compressor supplies exactly the needed amount of compressed air, maximizing energy efficiency and minimizing losses. Sustainability: We prioritize environmentally friendly solutions. The energy-saving technologies in our compressors reduce your costs and environmental impact, and the optional heat recovery system optimizes energy use. Integrated Refrigerated Dryer – Top-tier Air Quality Two-stage drying system: Ensures effective moisture removal and protects the pneumatic installation. Variable speed fan: Automatically adjusts cooling performance to suit working conditions, saving energy. Dual filtration system: Pre-filter with 3.0 µm precision removes larger solid contaminants; the fine filter with 0.1 µm accuracy traps oil aerosols and fine particulates, guaranteeing the highest level of air purity. Technical specifications: Motor power: 7.5 kW Ncedpfx Adoxmg A Ajiew Voltage: 400V/50Hz Free Air Delivery at 0-6 bar: 990 L/min F.A.D. at 6 bar: 950 L/min F.A.D. at 8 bar: 950 L/min F.A.D. at 10 bar: 930 L/min Outlet port diameter (G): 3/4" Dimensions: 1320 x 650 x 945 mm Weight: 320 kg

Kondisi: baru, Tahun pembuatan: 2026, The LUFT screw compressor features cutting-edge solutions for pneumatic applications, coupled with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, as well as high performance, guarantee efficient and trouble-free operation. The LUFT 1000 stands out thanks to its direct drive system, which ensures significantly better efficiency and reduced power loss compared to belt-driven models. This innovative approach allows optimal utilization of motor power, resulting in increased output with lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by an intuitive MAM series electronic control panel, giving you access to key compressor information for greater flexibility and process control. Technical specifications: Motor power: 7.5 kW Voltage: 400V/50Hz Capacity at 0-6 bar: 990 L/min Capacity at 6 bar: 950 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 930 L/min Discharge port diameter (G): 1/2" Dimensions: 810 x 610 x 850 mm Weight: 160 kg Nsdpfjy E Hpcsx Adiscw

Kondisi: baru, Tahun pembuatan: 2026, LUFT 1000 Screw Compressor with Inverter is a state-of-the-art solution in pneumatics, combining the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, and high performance guarantee efficient and trouble-free operation. Key Advantages of the 7.5 kW Induction Motor with Inverter - Significant Energy Savings: The inverter enables smooth and precise regulation of the induction motor's rotational speed. The compressor adjusts its output exactly to the current demand for compressed air. This means no idling (when the motor runs without producing air), no frequent start/stop cycles, and no energy losses from venting excess air. Depending on the air consumption profile at a given facility, electric energy savings can range from 25% up to 50%. The more variable the air demand, the greater the savings. - Stable System Pressure: Thanks to continuous speed adjustment, the inverter maintains an almost perfectly constant pressure in the compressed air network, regardless of fluctuations in demand. This is crucial for the proper functioning of pneumatic tools and machines, prevents pressure spikes, and increases process precision. - Reduced Starting Currents and Network Load: The induction motor started by the inverter accelerates gradually and smoothly, eliminating high inrush currents that could strain the electrical network and cause voltage drops. This protects electrical infrastructure and reduces the risk of disturbances. Ncedomqlhvepfx Adiew - Prolonged Component Lifespan: Smooth operation without abrupt starts and stops significantly reduces mechanical stress on the screw block, bearings, coupling, and motor itself. This translates to longer compressor life and lower costs for maintenance and spare parts. - Quieter Operation: When running at lower speeds (with reduced demand), the compressor generates less noise. This enhances acoustic comfort in the workplace, important for operators and the environment. - Greater Flexibility and Demand Matching: A compressor with an inverter can efficiently handle a wide range of air demands. It is ideal for companies where air consumption fluctuates throughout the day, week, or month. - Advanced Control and Diagnostics: The inverter integrates with modern control panels, offering extensive monitoring, fault diagnostics, remote control, and maintenance scheduling features. This gives the user full control and optimization of the compressed air system. Technical Specifications Motor Power: 7.5 kW Voltage: 400V/50Hz Capacity 0-6 bar: 990 L/min Capacity at 6 bar: 950 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 930 L/min Outlet Diameter (G): 1/2" Dimensions: 810 x 610 x 850 mm Weight: 160 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: • LUFT 1000 VSD+PM COMPACT screw compressor with integrated dryer. • 500L horizontal compressed air receiver. Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series use Permanent Magnet (PM) motors. Unlike standard induction motors: • They offer efficiency levels at IE4 or even IE5 class. • They maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range). • They are smaller, lighter, and produce less heat. 2. Advanced Variable Speed Drive Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). • Demand-based operation: The compressor does not operate in a simple “all or nothing” (load/unload) mode. If your machine only needs 30% output, the compressor reduces speed, consuming proportionally less energy. • Elimination of idle running: Conventional compressors often keep running for several minutes after the tank is filled, using around 25-30% of nominal power without producing air. Energy Saver models virtually eliminate these wasteful losses. 3. Smooth Start (Soft Start) Nedpfjycg Ufsx Adiocw Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current spikes at startup, which: • Reduces stress on the facility’s electrical system. • Allows more frequent start/stop cycles without risk of winding overheating. 4. Genuine Energy Savings In practice, using the Energy Saver line can reduce electricity costs by 30% to 50% compared to conventional fixed-speed compressors. The system also maintains highly stable network pressure (accurate to 0.1 bar), which is critical for precision equipment such as laser cutters. Longer lifespan: The absence of sudden pressure and temperature spikes extends the screw stage’s operational life. Technical Specifications Motor power 7.5 kW / 11 HP Voltage 400V/50Hz Free Air Delivery 0–6 bar average 990 L/min FAD @ 6 bar 990 L/min FAD @ 8 bar 950 L/min FAD @ 10 bar 950 L/min Outlet connection diameter (G) 3/4" Dimensions 1495 x 600 x 1600 mm Weight 350 kg

Kondisi: baru, Tahun pembuatan: 2026, A set comprising a LUFT 1000 screw compressor with frequency inverter, a vertical 500 L compressed air receiver with accessories, and an IZBERG N10S dryer. The CORMAK LUFT series screw compressor, produced by the Polish brand, incorporates the latest innovations in pneumatics combined with high-quality materials and components. Low operating costs, user-friendly service, ergonomic yet robust design, and high device efficiency ensure reliable and trouble-free operation. Technical specifications – LUFT1000 INVERTER: - Motor power: 7.5 kW - Voltage: 400V/50Hz - Capacity at 0–6 bar: 990 L/min - Capacity at 6 bar: 950 L/min - Capacity at 8 bar: 950 L/min - Capacity at 10 bar: 930 L/min - Outlet port diameter (G): 1/2" - Dimensions: 810 x 610 x 850 mm Ncodpfx Aexa Ah Uediow - Weight: 160 kg Technical specifications – IZBERG N10S air dryer: - Inlet/outlet pipe diameter (BSP): 1" - Maximum working pressure: 10 bar - Maximum inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Capacity: 1500 L/min - Power: 0.58 kW - Supply voltage: 230V - Dimensions (L x W x H): 380 x 600 x 625 mm - Weight: 31 kg - Refrigerant type/quantity: R134a, 400 g Technical specifications – 500L air receiver: - Weight: 145 kg - Connections: 6 - Connection size: 1.1/4", 2", 1/2" - Dimensions: 209.8 x 60 cm - Tank capacity: 500 L - Working pressure: 11 bar - Wall thickness: 4 mm - Diameter: Ø 600 mm - Height: 2098 mm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 14.669 h, Trumpf TruPunch 1000 2019 X Area kerja maks.: 2500 mm Y Area kerja maks.: 1250 mm Jam operasi: 14.669 jam Mesin - Rangka C - Panduan koordinat - Majalah linier dengan 20 slot untuk penjepit dan alat - Penjepit hidraulik (2 buah + 1 opsi) - Penggerak dengan motor arus bolak-balik yang tidak memerlukan perawatan - Perangkat penekan lanjutan dengan penekan yang dapat diprogram - 1. Pin penghenti (kanan, bagian dalam) - Rel pemisah Kepala penekan - Kepala penekan elektro-hidraulik - Dudukan alat monoblok yang dapat diputar - Posisi penekan yang dapat diprogram - Kompensasi panjang alat - Pelumasan semprot pada plunger - Penyedot serpihan penekan - Fungsi pembentukan Pengendali - Pengendali TRUMPF berbasis Rexroth IndraMotion MTX - Panel operator dengan layar warna TFT 15" - Data teknologi terintegrasi - Antarmuka teleservis melalui internet - Pemutus otomatis - Manajemen program - Rencana produksi Nedpfxjzmgi Ne Adijcw Transfer data - Antarmuka USB - Koneksi jaringan RJ45 Keamanan - Tanda CE - Penghalang cahaya multi-berkas - Pemutusan cepat penggerak Perlengkapan standar yang ditingkatkan - Meja sikat - Konveyor serpihan + wadah serpihan - Penjepit tambahan - Deteksi pembengkakan - Pemasangan peredam getaran - Meja penopang yang dapat diprogram - Sensor rel pemisah - Titik operasi nirkabel Teknologi penekan yang ditingkatkan: Multitool Pembentukan ulir

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), KOMPLETNA LINIA TETRA PAK TPA21 1000 SQUARE, ZAWIERA: - Nalewarkę TBA21/1000 V50, 15 000 motogodzin, - Aplikator TCA88, - Owijarkę kartonową TCBP70, V110, - Akumulator Easy Ride PRUS, - Transportery. Nedpfofc I H Djx Adiecw Stan bardzo dobry.

Kondisi: baik (bekas), 25 meter panjang rak ban Barang bekas, kondisi sangat baik, lihat gambar Tinggi 2,5 m Kedalaman 50 cm Kapasitas beban per bidang 9000 kg Panjang penyangga 2,1 m Penyangga dengan kapasitas beban/rak 1000 kg Harga yang dapat dinegosiasikan: € 1.950,-- belum termasuk PPN, pengambilan dari gudang Penawaran terdiri dari: + 12 buah rangka, sudah dirakit sebagian, kapasitas beban per bidang 9 ton, kedalaman 50 cm, tinggi 2,5 m + 66 buah penyangga, panjang 2,1 m, kapasitas beban/rak 1000 kg + 132 buah pengaman pengait + 24 buah jangkar beton Pelat keterangan beban Konfigurasi lain tersedia berdasarkan permintaan! Barang tersedia di gudang. Transportasi dan pemasangan dapat dilakukan berdasarkan permintaan. Inspeksi dapat dilakukan kapan saja dengan perjanjian. Informasi lebih lanjut tersedia berdasarkan permintaan. Selalu tersedia lebih dari 5000 meter panjang rak palet dari berbagai produsen di gudang. (Perubahan dan kesalahan dalam data teknis, spesifikasi, dan harga, serta penjualan antara waktu diperbolehkan! Lihat Ketentuan Umum kami, semua harga tidak termasuk PPN, pengambilan dari gudang) Lenox Trading – Penyedia solusi penyimpanan & rak beban berat terbaik, bekas & baru Teks deskripsi: Apakah Anda mencari rak penyimpanan berkualitas tinggi untuk dibeli? Lenox Trading, dengan sekitar 100 karyawan, adalah salah satu pedagang terbesar untuk peralatan penyimpanan baru dan bekas di seluruh wilayah DACH (Austria, Jerman, Swiss). Nsdpfx Ajfdik Ijdiscw ⚡ TERSEDIA SEGERA: • Lebih dari 10.000 meter panjang rak tersedia untuk pengiriman segera • 20.000 m² platform penyimpanan & platform konstruksi baja tersedia segera • 30–50 truk trailer bongkar muat barang setiap minggu untuk pilihan maksimal 📦 RANGKAIAN PRODUK KAMI (BELI SECARA ONLINE DENGAN HARGA TERBAIK): Baik itu rak palet, rak beban berat, rak tinggi, rak rak, rak ban, atau rak untuk wadah IBC – kami mengirimkan dan memasang di seluruh Eropa dengan TIM KAMI SENDIRI! Termasuk perencanaan CAD, transportasi, pembongkaran, dan pemasangan. 🏭 MERK TERBAIK, BEKAS & DARI LIKUIDASI / LELANG: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Tipe MPB, Tipe E, Rak beban berat Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Rak lengan gantung (Rak lengan gantung Elvedi, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 BIDANG BISNIS KAMI YANG KEDUA: LELANG ONLINE & LIKUIDASI Untuk pembongkaran dan pembersihan, kami menawarkan paket lengkap: 1. Pembelian sekaligus: Pembelian barang dagangan, peralatan, & seluruh stok gudang, termasuk pembersihan menyeluruh. 2. Lelang komisi: Pelaksanaan lelang atas nama klien. Layanan lengkap kami oleh karyawan kami sendiri: Katalogisasi, persiapan kantor, inspeksi, penyerahan barang, logistik, pembongkaran, dan penyerahan dengan bersih. Baik Anda menemukan kami melalui rak beban berat atau mencari rak beban berat galvanis / sistem rak beban berat – kami menjamin kondisi terbaik. Hubungi kami untuk penawaran tanpa kewajiban!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, de-fi Ncjdeuf Hx Tjpfx Adiow

Kondisi: bekas, Tahun pembuatan: 2006, Produsen: CFS Model: CM1000 Tahun: 2006 Kondisi: Bekas Nomor Seri: 486 Nomor Inventaris: 3400P Ncodpfszltfbox Adiew Lebar Pita: 1000 mm Daya: 3 x 400V, 50Hz, 3kW Dimensi: 2650 x 1800 x 2400 mm Berat: 1000 kg

Kondisi: sangat baik (bekas), NOMOR KATALOG 7896 DATA TEKNIS - diameter spindle: 30 mm - tinggi kerja spindle: 125 mm - spindle dapat diganti - penguncian spindle - dapat disesuaikan naik/turun + sudut - pemandu dengan pengaturan - 4 pilihan kecepatan putar + kanan/kiri: 1400/3500/6000/8000 rpm - ukuran meja: 1000x550 mm - meja dari besi cor - dengan meja geser: 1150x350 mm - penjepit - siku - motor: 4 kW - rem - diameter pipa hisap: 2x120 mm - dimensi P/L/T: 1320x1550x1200 mm – berat: 400 kg Ncsdpfx Aszkrp Nsdiew KEUNGGULAN – produksi Bulgaria – dengan meja geser – dengan spindle miring – mesin frais bekas – kondisi sangat baik Harga netto: 12.900 PLN Harga netto: 3.070 EUR berdasarkan kurs 4,2 EUR (Harga dapat berubah seiring fluktuasi besar nilai tukar)

Kondisi: bekas, Tahun pembuatan: 1990, Mesin Gerinda Silindris Eksternal/Internal TARDUGNO RIBON tipe MODUL 2A Jarak antar titik: 1000 mm Tinggi tengah: 180 mm Spindel penjepit benda kerja CM4 Diameter gerinda maksimum: Ø 360 mm Putaran penjepit benda kerja: dari 35 hingga 310 RPM Tahun pembuatan: 1990 Meja miring - 9° / + 6° Njdpfx Ajzn Ib Nedijcw Dimensi roda gerinda: Ø 406 mm x tebal 60 mm Skala pada meja X Kecepatan spindel: 1500 - 1730 RPM Motor batu gerinda: 5,5 CV Penyangga ekor hidraulik CM3 Pengumpan roda otomatis Spindel gerinda internal: Kecepatan maksimum 20000 RPM Pembesaran maksimum: dari 14 hingga 75 mm Tangki pelumas + filter kertas Sistem berlian Troli penyangga batu gerinda miring Dilengkapi dengan roda gerinda + penyangga Tegangan: 380 V Dimensi (P x L x T): 3800 x 2000 x 2200 mm Berat: sekitar 3,2 T

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, kapasitas angkut: 1.000 kg, tinggi angkat: 5.000 mm, Pengangkat Rantai Elektrik DEMAG DKUN10-1000 K V1 Kapasitas angkat 1000kg 2/1 Jarak pergerakan kait 5m Tahun pembuatan 2006 tanpa silinder kontrol, selain itu lengkap kondisi sangat baik berbagai pengangkat rantai elektrik tersedia Nodpfov Uvn Iex Adiscw kondisi baik Informasi: 20.000 suku cadang dan komponen DEMAG tersedia! gudang suku cadang Demag

Kondisi: baru, Tahun pembuatan: 2025, Ukuran (Panjang/Lebar/Tinggi) 1500x700x1600 mm Berat 900 kg Total kebutuhan daya 0 kW Mesin pengasah mata pisau serut GRINDER 1000 AUTO MAGNETIC PLC - Lebar kerja maksimum 1000 mm - Proses kerja otomatis pada sumbu X dengan THK - Rel linear dan penyedot debu - Penyesuaian otomatis pada sumbu Z - Meja penjepit magnetik 140 x 1000 mm - Sudut pengasahan +/- 90° Njdpjvz Hgbjfx Adiocw - Kecepatan putar roda pengasah 2840 RPM - Roda mangkuk 150 x 68 x 32 mm - Kecepatan umpan 3-9 m/menit, dapat disesuaikan secara bertahap dengan penggerak frekuensi - Motor 1,5 kW / 400 V - Motor penggerak umpan 60 W - Motor pompa pendingin 40 W - Sistem pendingin mencegah mata pisau menjadi terlalu panas - Lampu halogen dengan dudukan yang dapat disesuaikan - Dimensi P=1500, L=700 mm, T=1600 - Berat 900 kg