Beli Lechner Mesin Press Hidrolik / Hydraulic Press bekas (85.120)

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: Punching force: 25 t (250 kN) Pass-through width: 1800 mm (1660 mm usable) Clear opening between uprights max./min.: 155 / 25 mm Stroke: Punching stroke: 130 mm Total power requirement: 5.0 kW Machine weight approx.: 2.0 t Dimensions LxWxH: 2.3 x 1.0 x 2.2 m Hydraulic rail punching machine Hydraulic pressure: 250 bar Nsdpfou Szfusx Aa Uslb Punch table area = 1830 x 500 mm Punch carriage/plate = 500 x 500 mm; Travel speed = 800 mm/sec; Punch stroke = 63 mm/s, Forward/reverse travel 125/125 mm/sec. Operation via control panel with pressure switch/control lever Equipment: 2x pneumatic feed rollers Ø 120 x 1630 mm, pneumatically operated open/close

Kondisi: bekas, tecdet-press Nledpfx Ajw Smukja Ueb

Kondisi: bekas, Technical Details: Pressure: 6 t Column gap: - mm Stroke: 130 mm Table area: 1200x550x30 mm Throat depth: 500 mm Total power requirement: 1.1 kW Machine weight approx.: 1000 kg Space requirement approx.: L:1.8 x W:0.9 x H:0.9 m HORIZONTALE SSE - Operation via keypad Nsdpfxju Nfm Ts Aa Uolb - Operating pressure steplessly adjustable from 10 to 600 bar - The clamping range for the workpiece is set by manually adjusting the ram counter-holder plate with screws. - Ram counter-holder plate dimensions L:500 x W:300 x H:35 mm - Stroke of ram plate: 130 mm - Ram mounting plate: 550 x 300 x 35 mm Machine is available for demonstration.

Kondisi: bekas, en-001 Nedpfx Aju Nfnkja Uslb

Kondisi: bekas, Technical Details: Pressing force: 160 t Table area: 1,260 x 600 mm (vertical) Table plate dimensions: 1,260 x 600 x 70 mm (vertical) Ram surface: 700 x 360 mm Throat depth: 300 mm Machine weight approx.: 9,000 kg Dimensions (L x W x H): 3.7 x 1.5 x 2.2 m Distance bed to ram: 1,000 mm Mounted ram assembly: L: 660 x W: 300 x H: 370 mm Nodeu Nfpuepfx Aa Uslb Pass-through rollers, one each on the right and left, with vertical adjustment of 250 mm (Ø 80 x 300 mm)

Kondisi: bekas, Tahun pembuatan: 1974, Technical details: Pressure: 30 t Ram area: 450 x 250 mm Ram adjustment: max. 50 mm (manual) Njdju Icx Rjpfx Aa Uolb Strokes per minute: 20 - 120 Stroke: approx. 20 mm Stroke adjustment: no Installation height / Working space: 220 - 280 mm Usable table area: 600 x 600 mm Total power requirement: 7.5 kW Approx. machine weight: 5.0 t Dimensions L x W x H (machine): 1.8 x 1.2 x 2.7 m Dimensions L x W x H (control cabinet): 0.92 x 0.46 x 1.4 m Mechanical 4-column stamping press with feed unit with operator panel Clearances: Frame opening front = 350 mm and lateral = 258 mm

Kondisi: bekas, Technical details: Sheet thickness: 1 mm Gap between uprights: 2,255 mm Maximum bending angle: 130 ° Total power requirement: 2.25 kW Machine weight approx.: 1,400 kg Machine dimensions approx. (LxWxH): 2.7 x 1.15 x 1.3 m Machine without foot switch, but pre-wired for one. The previous owner retrofitted the upper beam for 60 mm adjustment; greater heights only possible by reverting the modification. Nodpfx Aaowq I U Rs Uolb Foot control is missing for automatic operation. Manual operation is functional. No back gauge.

Kondisi: bekas, Tahun pembuatan: 1997, en-US:Technical Details: Tube diameter: 4.75 - 8.0 mm Wall thickness: - mm Minimum bending radius: various mm Maximum bending angle: 180° Compressed air: min. 4.5 bar Total power requirement: approx. 10 kW Machine weight: approx. 6.0 t Machine dimensions (LxWxH): 6.3 x 3.7 x 2.0 m Control cabinet dimensions: 1.8 x 0.5 x 2.7 m Operator console dimensions (LxWxH): 0.85 x 0.68 x 1.65 m Fully automatic, numerically controlled system Suitable for bending hydraulic lines and automotive brake pipes of various lengths. - Variable number of bends possible (max. 100 bends per tube) - 2 different, independent bending modules. Each module is equipped with 2 NC axes with functions: "Longitudinal travel" (Axis 1 + Axis 3) Max. travel speed 2.0 m/sec, and "Rotation of the bending head" and "Bending" (Axis 2 + Axis 4), max. bending angle 180° - Program memory for 250 pipe types - The loading unit consists of a manually refillable drum magazine (capacity for pipe Ø=4.75mm to Ø=8.0mm with 500/1000 pieces) Njdpfxeu Ibuko Aa Ujlb - Loading by means of a swing-insertion arm - Operator interface Bundy GHF 60134 Accessories: - Various individual and attachment parts - miscellaneous.

Kondisi: bekas, Tahun pembuatan: 1992, Technical details: Sheet width: 1550 mm Sheet thickness: 2.5 mm Frame opening: 1630 mm Blade length: 1550 mm Stroke adjustment, upper beam: 90 mm manual / 70 mm hydraulic Stroke adjustment, lower beam/bending beam: 105 mm manual Stroke adjustment, bending beam: 40 mm Maximum bending angle: 93° (L-/Z-bending) and 180° (folding) Back gauge: no Total power requirement: 4.5 kW Machine weight approx.: 1.8 t Nljdpfxou Ib Anj Aa Ujb Machine dimensions approx. (LxWxH): 2.6 x 1.1 x 1.7 m Hydraulic unit dimensions: 1400 x 700 x 1480 mm Bending capacity 2.5 mm at approx. 400 N/mm² strength Hydraulic unit OILTECH, approx. 200 liters

Tahun pembuatan: 1997, Kondisi: bekas, Rincian teknis: Tekanan: 250 t Langkah: sekitar 400 mm Nsdpfsu Nfn Rox Aa Uolb Lebar celah: 640 mm Tinggi meja dari lantai: 900 mm Kecepatan ram: dapat diatur Celah pada penyangga samping: 470 mm Area penjepit meja (P x L): 570x550 mm Area penjepit ram: 570x550 mm Kebutuhan daya total: 56 kW Berat mesin sekitar: 9,0 t Dimensi mesin (P x L x T): 2,5x1,8x3,8 m Dimensi transportasi (P x L x T): 2,6x1,8x3,1 m - Kontrol manual dan otomatis melalui PLC Allen Bradley - Pengoperasian satu tangan dan dua tangan - Panduan ram empat-kolom, bebas kelonggaran - Pengaturan dan mode otomatis dikendalikan PLC (saat ini tidak berfungsi) - Tirai cahaya tipe Sick dan tirai pengaman terpasang - Tidak ada penandaan CE termasuk.

Kondisi: bekas, Tahun pembuatan: 1988, de-techdetails-bendingmachine Nsdpfxeu Ib Dfo Aa Uolb

Kondisi: bekas, Tahun pembuatan: 2022, Technical details: Pressure: 30 t Stroke: 142.5 mm Table surface: 500 x 180 mm Clear opening in table: 500 x 160 mm Frame width: 1000 mm Installation height, table/ram at top: 120 - 1020 mm Machine weight approx.: 176 kg Machine dimensions (LxWxH): approx. 0.8 x 0.8 x 1.8 m (D) Simple hydraulic double-column press – special construction, welded from 20 mm steel plate. Table support with V-block: 260 x 205 mm Lower bolster installation height max./min.: 1031 / 151 mm Njdeu N A Eajpfx Aa Uslb Table height above floor max./min.: 1290 / 300 mm Lower bolster vertically adjustable manually, 10 steps, step spacing 100 mm Ram carriage with stroke cylinder Ø 63 mm and punch mount pin bore Ø 25 x 25 mm *

Kondisi: bekas, Technical Details: Pressing force: 25 t Stroke: 500 mm Installation height (table/ram at top position): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 75 mm Passage in table: Ø 180 mm Clamping surface of ram: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Nsdovc Awxepfx Aa Ujlb Approx. machine weight: 2.2 t Approx. dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke operation

Kondisi: bekas, Tahun pembuatan: 1991, Technical details: Press force: 40 t Installation height: table/ram top: 450 mm Throat depth: 375 mm Ram stroke: max. 300 mm Table size: 900 x 500 x 85 mm Table opening: Ø 120 mm Height above floor: 900 mm Total power requirement: 15.0 kW Machine weight approx.: 5.8 t Machine dimensions (LxWxH): 2.3 x 1.45 x 2.40 m The press is constructed with a welded frame, according to structural calculations (manufacturer's specifications). The pump unit consists of three-stage pumps (high-pressure pump, low-pressure pump, and a control pump). Nsdpfx Aou Nfp Ioa Uolb Further technical data: - Ram plate size (W x D): 900 x 500 mm - Pin hole in the ram: Ø 40 x 75 mm - Hydraulics: tank capacity approx. 500 liters; operating pressure 275 bar; pump capacity 22.9 l/min - Overrun distance: 7 mm - Overrun time: 58 ms - Single-stroke and automatic cycle - Light barrier (can be optionally repaired) Two-hand operation and/or control panel *

Kondisi: bekas, Tahun pembuatan: 1960, Technical details: Pressure: 10 t Throat depth: 255 mm Maximum ram stroke: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height (table/ram, top): 630 mm Installation height (table/ram, bottom): 230 mm Table clamping surface: 420 x 400 mm Through-hole in table: 220 mm Ram clamping surface: 200 x 200 x 65 mm Nsdpfou Nfudsx Aa Uelb Total power requirement: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions (LxWxH) approx.: 1.1 x 0.5 x 2.1 m

Kondisi: bekas, Detail teknis: Tekanan: 80 t Jarak antar kolom: 880 mm Ketinggian pemasangan: 200 mm Ukuran meja: 880x300 mm Tinggi di atas lantai: 1000 mm Jarak antar kolom: 800 mm Kebutuhan daya total: sekitar 12 kW Berat mesin kira-kira: 2855 kg Kebutuhan ruang: P:1,4xL:1,65xT:1,9 m PRESS EMBOSSING - PUNCHING - Hot press (press pemanas) Area penggunaan: - misal untuk film, plastik, kertas, hardboard, dll. - Ukuran pelat stempel: 600x310 mm Perlengkapan: - Counter Nlodpfx Aaeu Icwte Uob - k - Catu daya 380/415 V / 50 Hz Aksesori: - Pelat penahan untuk matris (600x300x90mm) tidak dapat dipanaskan. Dijual apa adanya.

Kondisi: bekas, Technical Details: Pressing force: 100 t Installation height (table/ram, top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Nsdpfjvc Ax Nox Aa Ujlb Table size (L x W x H): 750 x 560 x 90 mm Table opening: Ø 26 mm Ram clamping surface (W x D): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor level: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Kondisi: bekas, OTT JU 90 veneer press - used - ----- Technical Data ----- Pressing area: 2,550 x 1,350 mm Nlsdpfxswmmrao Aa Ueb Heating plate output: 9,100 W per plate Number of cylinders: 4 units

Kondisi: sangat baik (bekas), NOMOR KATALOG 8008 SPESIFIKASI TEKNIS - area pemuatan: 2 - penjepit samping yang dapat diatur secara manual: 2x6 buah - penjepit atas pneumatik: 2x2 buah - panjang maksimum elemen yang direkatkan: 3000 mm Njdpfxoy T Rdyj Aa Ujlb - tinggi maksimum elemen yang direkatkan: 1000 mm - ketebalan maksimum elemen yang direkatkan: 100 mm - dimensi (p/l/t): 3000x1300x1650 mm - berat: sekitar 600 kg KEUNGGULAN – dua area kerja – panjang pengeleman 3000 mm – tidak dicat – mobil – dengan roda – mesin press bekas, kondisi sangat baik Harga netto: 12.900 PLN Harga netto: 3.071 EUR (berdasarkan kurs 4,20 PLN/EUR) (Harga dapat berubah tergantung fluktuasi kurs yang lebih besar)

Kondisi: bekas, Tahun pembuatan: 2023, used condition year of manufacture 2023 stock number 7280 delivery time immediate, subject to prior sale country of origin Turkey price €15,700 in stock 1 pressing force 100 t cylinder fixed or movable fixed bending length 1020 mm stroke 300 mm clearance between uprights 1020 mm distance between table and tool holder 680 mm rapid traverse 9 mm/s Njdpfx Aaeynm Nmo Uolb working speed 5 mm/s return speed 10 mm/s max. bending capacity (mild steel) 6 mm table 500x1020 mm drop-through hole in table 100 mm hole spacing 190 mm length 2110 mm width 1000 mm height 2275 mm weight 2082 kg demonstrator / as-new condition net price (new price €19,550) 2 guides large ram plate and large support table with T-slots upper and lower tools for edge bending manometer rapid approach with automatic changeover to working speed infinitely adjustable piston stop in any position two-hand operation AND FOOT PEDAL table height adjustable CE compliant equipment operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detailed photos & function videos of the current condition • ONSITE LIVE CHECK Live demonstration at our facility • DIGITAL DEMO Individual live demonstration via video call • RISK-FREE PURCHASE 14-day right of return Details:

Kondisi: baik (bekas), Tahun pembuatan: 1999, Pneumatic press, manufacturer SCHMIDT, model ZHS-2/22, year of manufacture 1999. Equipped with two-hand operation. UVV-certified until 2023. Nlsdpfx Aoiduvcja Ujb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Mesin injeksi NEGRI BOSSI V1250 1.250 ton Tahun: 2004 Jumlah jam kerja: 32.000 Nedjw Uaw Djpfx Aa Uelb Sekrup dan barrel baru

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1988, lebar kerja: 3.000 mm, jenis mahkota: manual, ketebalan lembaran (maks.): 6 mm, panjang total: 2.500 mm, lebar total: 4.500 mm, tinggi total: 2.500 mm, Perlengkapan: dokumentasi / manual, henti darurat, Hydraulische Schwenkbiegemaschine_FabKRAMER_AMautVIIhy3000_de Njdpsy T R Swsfx Aa Uslb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, daya: 17 kW (23,11 hp), gaya penekanan: 220 t, panjang langkah: 180 mm, kedalaman tenggorokan: 420 mm, lebar total: 3.650 mm, tinggi total: 2.900 mm, berat keseluruhan: 17.900 kg, hydraulische-abkantpresse-amada-hfb-220-30-h Njdpey T R Ryofx Aa Uolb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Dimensions: 2650 x 2100 x 2100 mm Clamping force: 635 kN Operating pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight opening: 150/180 mm Nledsy T I Ipepfx Aa Ujb Heated platen dimensions: 250 x 300 mm Max. weight of heated platens: 70 kg Oil tank: 100 l Nominal power: 19.66 kW Heating power: 9.6 kW Vacuum motor power: 2.6 kW Light curtain, distance to tool area: 270 mm Vacuum cover stroke: 140 mm The vulcanizing press manufactured by PAN STONE, model S-V-65-2RT-PCD, was previously used by a renowned German company specializing in sealing technology and electromobility. This company is recognized for its high quality and innovations in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It has been continuously maintained and serviced professionally, which accounts for its excellent condition. This press offers you the opportunity to invest in proven technology previously operated by a leading company in Germany.