Beli Mesin Pencukur Roda Gigi bekas (80.642)

Kondisi: bekas, Tahun pembuatan: 1983, Workpiece diameter 250 mm Centre distance 0 mm Maximum honing length: --- mm Maximum module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Model D - 250 Year of manufacture 1983 * Serial No. 31 205.049.22 _____ Gear diameter: 10 - 250 mm Module: 1 - 5 Gear length / Max. table stroke: 500 mm Centre height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swivel range of the honing head: +/- 35° Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross slide travel: 270 mm Cross slide rapid traverse: 50 mm Bsdpfxjt Hwzpe Am Ijlg Cross slide mechanical infeed: 1 - 8 mm/⌀ Roughing / finishing infeed: 1-29 / 0.2-2.8 μm/sec Table speed hydraulic: 0 - 6 m/min Total drive: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / Special equipment: - Pre-settable machining parameters via counters and control switches for automatic operation, with workpiece counter - All roughing and finishing infeeds adjustable via decade switches, table reversal times adjustable via potentiometer, rapid infeeds adjustable by time (1s = 0.04mm) - Ampere display, etc. - Capability for crowning and taper honing via templates, also possible off-centre; workpiece must be pre-machined accordingly - Stand-alone honing oil system with magnetic separator and fine filter - Mechanical tailstocks for manual loading, oil mist separator - Sliding doors with foot switch, stand-alone hydraulics

Kondisi: bekas, Tahun pembuatan: 1980, Max. wheel diameter - 400 mm Wheel width - n/a mm Module - max. 5 Module - min. Total power requirement - kW Bljdpfx Ajt Hw Ebjm Isg Machine weight approx. t Space requirements approx. m Manual double-flank gear rolling tester

Kondisi: bekas, Tahun pembuatan: 1980, en-01 Blsdpfx Amst Hwnio Iog

Kondisi: bekas, Tahun pembuatan: 1977, Max. grinding diameter: 400 mm Grinding width: 0 mm Module - max.: (not specified) Module - min.: (not specified) Total power requirement: 3 kW Machine weight approx.: 4.2 t Bsdst Hwnvopfx Am Iolg Space requirement approx.: (not specified) Wheel diameter (min./max.): 64 - 320 mm Grindable module size: 1 - 12 module Max. hob width: 40 mm Number of teeth: 13 - 240 Roll radius - Ø: 73 - 320 mm Workpiece table feed rates: 5 - 20 - 30 - 40 teeth/min Grinding wheel speed: 690 rpm Grinding wheel diameter: 762 mm Grinding wheel swivel (engagement angle): 5-21° Grinding slide swivel (helix angle): 2 x 35° Vertical grinding slide adjustment: 240 mm Dressing speed: 1 / 0.5 / 0.25 m/min Grinding spindle drive / Total drive: 1.1 / 3 kW - 380 V - 50 Hz Weight approx.: 4,200 kg Accessories / Special equipment: The machine is suitable for grinding external and internal gear shaper wheels as well as for grinding master gears or cutter wheels for gear shaping machines. Unfortunately, no further accessories are available for the machine—an investment as a secondary machine is recommended if suitable tooling is already available.

Kondisi: bekas, Tahun pembuatan: 1975, Wheel diameter – max. 160 – 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Machine weight approx. 3 t Space requirement approx. m K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Lead Inspection Type PFSU 1600 Year of manufacture: 1975, modernized in 1995 #B 2281 Working range: Min./Max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Max. gear width: 250 mm Stroke of measuring slide approx.: 300 mm Max. helix angle: 0 – 90° Max. workpiece length in centers: approx. 1,150 mm Tailstock throat: 450 mm Diagram recording magnification: 50/250/500/1000 x Max. test gear weight: approx. 4,000 kg Weight approx.: 3,000 kg Total drive approx. 1 kW – 380 V – 50 Hz Suitable for inspecting: - Tooth profile (involute) - Tooth lead (helix angle/lead) on internal and external gears, cutting and shaving gears, worms, etc. - Tooth runout, surface roughness - Determining/reconstructing base circle and helix angle, and more Accessories / Special equipment: - Optical base circle setting and optical angle adjustment; no base circle disks required - Designed to accept heavy workpieces; testing cycle can be motorized or manually controlled via handwheels - Rotating auxiliary table, Ø 480 mm, for mounting larger gear bodies, with 2 sets of different-length supports (400 and 470 mm), up to the maximum gear diameter of 1,600 mm - Counter-support AV 17 for maximum workpiece length of 1,150 mm Bledpfxet Hwpte Am Ieg - Separate electrical cabinet for manual movement control - GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally German, program update to latest version V 21.17, ideal for generating modern test reports with graphics, graphic display on monitor, additional subprograms, HP printer, flat screen - Various probe inserts, small parts, adjustable mount for indexing test device (mounted at rear), leveling feet, etc. - Without indexing test device, but mounting provided and installed at rear Condition: very good – demonstration-ready, professionally dismantled and reinstalled.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G0504, diameter benda kerja (maks.): 63 mm, jarak gerak sumbu Z: 105 mm, diameter luar: 275 mm, jarak antara pusat: 350 mm, sudut putar sumbu A (min.): -30 °, sudut putar sumbu A (maks.): 30 °, TECHNICAL DETAILS Workpiece diameter: 63.5 mm Centres distance: 350 mm Clamping surface length: 1,550 mm Number of T-slots: 2 T-slot width: 18 mm T-slot spacing: 180 mm Centre height (tailstocks): 350 mm Fine adjustment head swivel range (U axis): +30 / -30° Centre distance tailstock/fine adjustment: min. 120 mm / max. 225 mm Input increment (all NC axes): 0.001 mm / degree Control: SIEMENS 840D Cross Slide Travel (Z axis): 105 mm Input increment: 0.001 mm Tool Outer diameter: 225 - 275 mm Bore diameter: 160 mm Width: 60 mm Workpiece Details Outer diameter: 40 - 150 mm Module: 1.25 - 4.0 mm Max. tooth width: 45 mm Speeds and Feeds Tool speed: max. 2,000 rpm Feed rate Z-direction: up to 2 m/min Feed rate X-direction: up to 2 m/min Feed rate U-direction: up to 2 m/min Feed rate V-direction: up to 2 m/min C3-direction: max. 12°/s Servo Drives Tool drive C1: 27.0 Nm at 3,000 rpm Workpiece drive C2: 27.0 Nm at 3,000 rpm X axis: 20.0 Nm at 3,000 rpm Z axis: 20.0 Nm at 3,000 rpm U axis: 6.0 Nm at 3,000 rpm Portal vertical (V1 axis): 6.0 Nm at 3,000 rpm Gripper rotary axis C3: 5.0 Nm at 3,000 rpm Loading slide (X1 axis): 5.0 Nm at 3,000 rpm Three-Phase Motors Hydraulic motor: 1.5 kW at 1,410 rpm Central lubrication: 0.07 kW at 2,700 rpm Coolant pump: 4 kW at 2,840 rpm Bedpfx Amswmbmlo Ielg Hydraulic Equipment Flow rate: 21 l/min System pressure: 50 bar Clamping pressure (headstock): max. 35 bar Clamping pressure (tailstock): min. 20 bar / max. 35 bar MACHINE DETAILS Weight: 5,500 kg Space requirement: 2,700 x 2,300 x 2,600 mm Operating Fluids Hydraulic fluid: HLP D 46 Hydraulic fill volume: 100 l Electrical Operating voltage: 400 V Control voltage: 24 V DC Lighting voltage: 230 V AC Frequency: 50 Hz Power requirement: approx. 27 kVA EQUIPMENT - Central lubrication - Coolant pump - Capacitive distance system - Automatic workpiece clamping - Fine adjustment head with U axis - Machine with complete hydraulic equipment - Dialogue-guided operating terminal

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 26.583 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A0248, diameter benda kerja (maks.): 130 mm, TECHNICAL DETAILS Maximum workpiece diameter: 130 mm Number of axes: X, Z, A, B, C (0–3) Electrical specifications Connected load: 47 kVA Voltage: 400 V Frequency: 50 Hz Bsdpfxowmc Ide Am Ielg

Kondisi: sangat baik (bekas), Max. wheel diameter: 1600 mm Min. wheel diameter: 800 mm Gear width: 560 mm Max. module: 16 Min. module: 4 Table diameter: 1350 mm Table load capacity: 7000 kg Machine weight: approx. 18 tons Machine equipped with change gears, arbors, and fixture set Machine is in very good condition Blodpov Igc Nsfx Am Ijg

Kondisi: baik (bekas), Tahun pembuatan: 1987, jam operasional: 2.685 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 240 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 400 mm, panjang total: 5.235 mm, tinggi total: 3.045 mm, lebar total: 3.990 mm, kecepatan spindel (maks.): 640 rpm, kecepatan spindel (min.): 55 rpm, berat keseluruhan: 11.000 kg, Perlengkapan: dokumentasi / manual, Gear hobbing machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which underwent a general overhaul just a few years ago. Investments made: - Overhaul including milling head (2021): approx. €70,000 - All hydraulic hoses replaced (2021): approx. €3,500 - New oil mist separator (2021): approx. €5,000 Many tools and clamping devices available, see pictures and attachments. Blodpfxew Dcx Rs Am Ijg

Kondisi: bekas, Tahun pembuatan: 2008, de-hu-it-lt-01 Blodpfx Amevxww Se Iog

Kondisi: sangat baik (bekas), Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, Dijual mesin hobbing ini. Terpasang, dapat diuji coba. Banyak aksesori. Spesifikasi teknis: Diameter roda maks.: 7100 mm Lebar roda gigi: 1500 mm Modul maks.: 45 Diameter meja: 4000 mm Diameter x lebar cutter: 400 x 500 mm Sudut heliks maks.: 45 derajat Diameter planer: 500 mm Putaran planer: 9–63 rpm Daya total terpasang: 47 kW Berat mesin: 160.000 kg. Bedpfxjxwlthj Am Islg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1974, Dijual mesin ini. Tersambung, bisa dicoba. Modul maksimum 25 mm. Diameter roda gigi maksimum 500 mm. Panjang pemesinan maksimum 3.000 mm. Beban maksimum meja 4.000 kg. Diameter cutter maksimum 250 mm. Panjang cutter maksimum 300 mm. Daya total terpasang 25 kW. Tinggi mesin 2.100 mm. Panjang mesin 7.600 mm. Lebar mesin 2.800 mm. Berat mesin 27,1 ton. Video mesin dapat dikirim melalui aplikasi WhatsApp. Bljdpfx Asv Nqq Tom Isg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter meja: 430 mm, Harga untuk kedua mesin – hanya dijual sebagai satu paket. Merek: STAEHELY SH 500 Bodpexfub Dofx Am Ielg Aksesori: roda gigi pengganti, arbor, dan satu mesin dengan kepala frais tangensial (lihat foto)!!!!! Diameter meja = 430 mm Diameter roda gigi maks. = 500 mm Lebar roda gigi = 240 mm Modul = 6

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Profile Thread and Gear Hobbing Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Maximum workpiece diameter over saddle: 250mm Maximum workpiece diameter over bed slideway: 500mm Spindle bore: 102mm Tailstock quill adjustment: 100mm Main motor: 4.0 kW Cross axis (x) feed motor: 4.3 kW Longitudinal axis (z) feed motor: 3.8 kW Electrical Equipment Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic controller for predefined machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard Accessories: • Standard thread milling attachment ApG • Maximum milling diameter: 150 mm • Milling spindle internal taper: Morse 3 • Maximum module for gear hobbing: Module 3 • Smallest to largest tooth count for gear hobbing: 4–50 Options: • Gear hobbing attachment ApFW For hobbing axis-parallel and helical profiles up to module 7 Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4 • Heavy-duty thread milling attachment ApGS For hobbing axis-parallel and helical profiles up to module 5 Bodpfx Aow Hquxjm Ijlg Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4

Kondisi: bekas, Tahun pembuatan: 2006, Maximum transmission ratio 10:1 Number of teeth – min. 3 Number of teeth – max. 200 Tooth height 20 mm Maximum tooth width 58 mm Infinitely variable grinding spindle speed 6000 rpm Workpiece spindle speed 1200 rpm Maximum tool diameter 230 mm Minimum tool diameter 69.85 mm Bedpsvxwr Ajfx Am Iolg X-axis travel 325 mm Y-axis travel 350 mm Z-axis travel 470 mm B-axis +90.1 / –1° Workpiece table – Ø 212.71 mm Control system: SIN 840 D SIEMENS Total power requirement 75 kW Machine weight approx. 10,000 kg Space requirement approx. 6.10 x 4.40 x 3.30 m Coolant filtration unit: Hoffmann HSF 100 V

Kondisi: bekas, Tahun pembuatan: 2001, Wheel diameter - max. 400/500 mm CNC control system: GE FANUC Series 160i-M Pinion diameter - max. 400 mm Ring gear diameter - max. 500 mm X-axis travel: +/- 70 mm Y-axis travel: 200 mm Z-axis travel: 200 mm Axis angle: 90 degrees Bedpfx Aevxwxcom Ielg Speed range: R T min Rated current: 30 kVA Machine weight: approx. 6.2 t Space requirement: approx. 3.2 x 2.5 x 2.3 m

Kondisi: bekas, Tahun pembuatan: 2008, Maximum transmission ratio 10:1 Number of teeth - min. 3 Number of teeth - max. 200 Tooth height 20 mm Maximum tooth width 58 mm Grinding spindle speeds stepless up to 6000 rpm Workpiece spindle speed 1200 rpm Maximum tool diameter 230 mm Minimum tool diameter 69.85 mm Bodpfx Aevxwmtem Iolg X-axis 325 mm Y-axis 350 mm Z-axis 470 mm B-axis +90.1° / -1° Workpiece table - Ø 212.71 mm Control SIN 840 D SIEMENS Total power requirement 75 kW Machine weight approx. 10,000 kg Space requirements approx. 6.10 x 4.40 x 3.30 m Internal measuring probe Renishaw LP2 (X2; Y2 axis) Hoffmann coolant filtration system HSF 100SE/K (year 2008) Tank capacity 2500 L VT oil mist filtration system

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10034352, Hommel measuring machine in good condition Bledpfx Aeualwkjm Iog

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 3 kg, panjang pemakanan sumbu X: 100 mm, panjang umpan sumbu Y: 100 mm, panjang umpan sumbu Z: 200 mm, diameter benda kerja (maks.): 180 mm, panjang penggilingan: 200 mm, berat keseluruhan: 5.000 kg, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 400 rpm, diameter alat: 80 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, de-en Bsdox Af A Hjpfx Am Iolg

Kondisi: bekas, Mesin Frais Roda Kerucut Modul KF 250 HSC dirancang sebagai mesin universal untuk pemrosesan roda gigi yang fleksibel dan digunakan oleh produsen teknologi roda gigi dan transmisi untuk proses milling roda kerucut. Data teknis: Diameter roda: 300 mm Modul - maks.: 10 Lebar gigi: 60 mm Kebutuhan ruang sekitar: 4,2 x 2,6 x 2,2 m Berat mesin sekitar: 11.000 kg Blodpfexz Eg Aex Am Ijg *Gambar menunjukkan mesin dalam kondisi saat ini sebagai mesin bekas dan atas permintaan dapat ditawarkan sebagai unit yang dimodernisasi sebagian atau sepenuhnya (retrofit) dengan kontrol CNC baru (SIEMENS ONE).

Kondisi: bekas, Mesin frais roda gigi bevel Samputensili S 500 B dirancang sebagai mesin universal untuk pemesinan roda gigi yang fleksibel dan digunakan oleh produsen teknologi roda gigi dan transmisi untuk proses pemotongan roda gigi bevel. Blsdpfexz Ef Ssx Am Ijg Data teknis: Diameter roda: 500 mm Modul - maks.: 5 Lebar gigi: 100 mm Kebutuhan ruang sekitar: 4,5 x 3,2 x 2,4 m Berat mesin sekitar: 13.000 kg *Gambar menunjukkan mesin dalam kondisi sebenarnya sebagai mesin bekas; atas permintaan, mesin dapat ditawarkan dalam kondisi semi-modernisasi atau sepenuhnya dimodernisasi (retrofit) dengan kontrol CNC baru (SIEMENS ONE).

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, The Klingelnberg PKE 300 H (PSKE 900) bevel gear testing machine was designed as a universal machine for flexible gear processing and is used for single-flank rolling inspection of bevel gears with evaluation. The image shows the machine in its current status as a retrofit / modernized version. Specifications: - Gear diameter: 450 (300) mm - Axis angle: 90 degrees - Hypoid offset: +/- 60 mm - Space requirements (approx.): 1.4 x 0.8 x 1.5 m - Machine weight (approx.): 1,100 kg Bljdpotncnhsfx Am Isg For further information on available options and the current purchase price, please inquire. *Information and appointments are subject to change without notice. Prior sale reserved.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, The Gleason-Welter 2000 T bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for single flank rolling tests of bevel gears and crown gears. Technical data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 mm Machine weight: approx. 12,500 kg *Specifications and data are non-binding, subject to prior sale Bjdpfewn D Uhex Am Ielg Special features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles of 0 to 360 degrees, as well as spur, helical and internal gears. Deviations in gear geometry, machining errors caused by defective tools as well as damage to the gears can thus be detected and eliminated prior to assembly. The following parameters can be measured: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviation Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions or further information, please contact us at any time.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, VEB Fritz Heckert ZFWVG 250×2000 Bodpfx Ajw Dvanem Iolg Maximum workpiece length: 2,000 mm Maximum workpiece diameter: 250 mm Accessories: Second milling head, various module hobbing cutters, steadies, clamping devices, etc.

Kondisi: bekas, Gear Hobbing Machine – Horizontal WMW MODUL ZFWZ 1250/3 Year of manufacture: 1982 Control: Conventional Country of origin: Germany Max. gear diameter: 1250 mm Gear width: 600 mm Bjdpfx Aswxxxcom Ielg Module – max.: 16; min.: 2 Cutter diameter: 240 x 280 mm Table clamping surface: 1020 mm Speed range: 28 – 200 rpm Axial feed: 0.28 – 8 mm/min Radial feed: 0.1 – 2 mm/min Tangential feed: 0.16 – 4 mm/min Swiveling range of milling spindle slide (L/R): +/- 45° Rapid traverse motor: 12.5 kW Voltage: 380 V Frequency: 50 Hz Total power requirement: 5 / 19.5 kW