Beli Perangkat Uji, Mesin Penguji bekas (80.983)

Kondisi: bekas, SincoTec Type: Exciting Mot Resonance Test Bench POWER SWINGLY 20 kN Isdpfjvx Su Ssx Am Rjau The POWER SWINGLY BigTable resonance test bench is designed as a two-mass oscillator. It consists of an oscillation head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillation head is located in the upper part of the machine and generates the dynamic amplitude. The oscillation head is supported by preloaded compression springs on the upper crossbar and is guided centrally. The middle load drive is located in the lower part of the machine and applies the static preload via a geared motor and spindle drive. The specimen chamber is situated above the clamping table and is bounded at the top by the adjustable crosshead. Control of the test bench is handled by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and complies with protection class IP 50 according to EN 60529. Technical Data: General test bench data: Total height test bench: 1840 to 2240 mm Height of machine table: 1030 mm Width of test bench: 800 mm Depth of test bench: 1500 mm Specimen chamber height: max. 600 mm (without force transducer) Clear column passage: 550 mm Maximum force amplitude: 10,000 N Maximum total force: ±20,000 N Maximum oscillation amplitude: ±5 mm Test frequency: 30 to 110 Hz Transducer accuracy: at least Class 1 (according to DIN EN 10002-3) Test bench weight: approx. 1,880 kg Max. fixture weight: 150 kg General control cabinet data: Total height control cabinet: 1,900 mm Height of table top: 1,080 mm Control cabinet width: 650 mm Control cabinet depth: 700 mm Weight of control cabinet: 152 kg Color: RAL 9006 (White Aluminium), table top Midnight Site requirements: Space requirement: 2.5 x 2.5 m Required ceiling height: 2.8 m Floor load capacity: 170 N/cm² Power supply: 400 V / 50 Hz (clockwise rotation field) Connection plug: CEE connector, 5-pole, 16 A Fuse protection: 16 A Connection and environmental conditions Network conditions: Voltage: 400 V three-phase with neutral conductor and protective earth, clockwise rotation Voltage fluctuations: < ±10% Short-term voltage dips: < 20 ms Limits for continuous interference emission: Radio interference level A according to VDE0871 Frequency: 50 Hz ±1% Protective earth: earth resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data; details are subject to confirmation!) Further questions are welcome by phone.

Kondisi: sangat baik (bekas), Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 Isdew Uifdopfx Am Roau For sale is a high-quality materials testing machine, Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), offered with comprehensive equipment. This system is ideal for performing tensile, compression, flexural, and component tests and comes with original Zwick software, accessories, and a safety screen. Complete System - Includes safety screen (CE-compliant, with electric interlock) - Extensive accessories and software included Technical specifications of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Working area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Includes connection card for load cell (additional slot for upgrades available) Expandable with options and modules Safety – Safety Screen (included): - Suitable for ProLine Z005TN, Z010TN, Z020TN - With electrical interlock and additional manual locking - 6 mm thick Makrolon screen, pivoting (hinged left) - CE-compliant - Mandatory for applications with risk of injury to the operator Load Cell: Xforce HP load cell, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely high linearity

Kondisi: sangat baik (bekas), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This device is used to test for water ingress into enclosures. When used with a timer switch, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Compliant with DIN VDE 0470 Part 1 and EN 60529 for testing according to protection classes IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle Iasdpsxg Hrksfx Am Rou - Interchangeable oscillating tubes - Swiveling and replaceable nozzle holders - Adjustable and measurable water flow rate - Test duration control Specifications for Mechanical Load Maximum load with test specimens (evenly distributed): - Permissible test specimen weight for tray (total): 25 kg - Spray radius: 200 mm / 400 mm Specifications for IP Protection Degree Testing - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ± 60° - Oscillation angle IPX4: approx. ± 180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the specifications!) If you have further questions, we will be happy to answer them by phone.

Kondisi: bekas, Zwick Tipe: HA 50 Dimensi: T 2685 mm x L 1040 mm x D 750 mm Luas area penempatan: 1600 cm² Data teknis: Fmax: 50 kN Vmax: 1500 mm/s Ruang kerja tinggi max 1370 mm Ruang kerja lebar 565 mm Aksesori: Iodox A Aaispfx Am Reau Sensor gaya Kistler 50 kN via NI-Labview Unit hidrolik 280 bar Luas area penempatan: 415 cm² Alat penjepit / penahan sampel tersedia (Flensa universal, rahang ekstra kuat untuk penahan sampel) Komputer + perangkat lunak testXpert R V6.0.0 Kondisi: bekas Ruang lingkup pengiriman: (lihat gambar) Berat sekitar 1200 kg tanpa rangka dll. (Perubahan dan kesalahan data teknis dimungkinkan, spesifikasi dapat berubah!) Untuk pertanyaan lebih lanjut, silakan hubungi kami melalui telepon.

Kondisi: bekas, 1 Iasdpfx Amjx A Aa Aj Rju

Kondisi: bekas, Zwick Tipe: Z30 Iajdpfex Az Sksx Am Rou Data teknis: Tinggi total: 2114 mm, lebar: 748 mm, kedalaman: 580 mm Fmax: 30 kN Vmax: 125 mm/dtk Aksesori: Ekstensometer ClipOn 13,5 mm Ekstensometer ClipOn 40 mm Komputer + perangkat lunak testXpert II V3.5 Berat total: sekitar 500 kg Kondisi: bekas Ruang lingkup pengiriman: (lihat gambar) (Perubahan dan kesalahan dalam data teknis dan spesifikasi dapat terjadi!) Untuk pertanyaan lebih lanjut, silakan hubungi kami melalui telepon.

Kondisi: sangat baik (bekas), en-Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Chamber This unit is used to test the ingress of water into enclosures. In conjunction with a time switch, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Compliant with DIN VDE 0470 T1 and EN 60529 for protection class tests to IPX3 and IPX4. Integrated recirculation system minimizes water consumption. Features: Iajdpfx Amexxuyts Rsu - Glass door with wiper - Pneumatic drive for oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swiveling and exchangeable nozzle holders - Adjustable and measurable water flow rate - Programmable test duration Mechanical load specifications: Maximum test load (evenly distributed): - Permissible test sample weight for carrier (total): 25 kg - Spray radius: 200 mm / 400 mm Specifications for IP protection class testing: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ± 60° - Oscillation angle IPX4: approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm External dimensions (D x W x H): approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see images) (Subject to technical modifications and errors. All information without guarantee!) For further questions, please contact us by phone.

Kondisi: bekas, Mesin uji sampel beton untuk pengujian beton dan material Uji lentur Penentuan kekuatan tekan Isdpfoxb Nv Ujx Am Rjau

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin uji tipe rotary untuk pengujian transformator dengan 8 stasiun. Stasiun pengujian untuk: tegangan, input/output, arus dalam mA, tegangan tinggi, cetak pad. Adapter pengujian tersedia untuk semua jenis trafo EI standar. Iedjyl Adzjpfx Am Rsau

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 16.844 h, jenis bahan bakar: gas, Perlengkapan: kabin, Hyster H2.0FT Year of manufacture: 2012 Lifting capacity: 2000 kg Duplex mast Mast lifting height: approx. 3300 mm Mast overall height: approx. 2170 mm LPG drive Weight: approx. 3660 kg Engine power: 38 kW Front tyres: 7.00x12/5.0 Rear tyres: 6.00x9/4.00 Full cabin Forks Fork side shift Forklift technical documentation Operating hours: 16,844 h Forklift after service inspection, fully operational and ready for work. Service work performed on the forklift: - Coolant replacement - Engine oil change Iedpfx Ajt Uyzhom Roau - Filter replacement: oil, air, and LPG - Timing system and spark plug replacement - Engine seal replacement - Engine valve replacement.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 6.019 h, tinggi angkat: 3.300 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 2.150 mm, panjang garpu: 1.150 mm, kondisi ban: 100 persen, Perlengkapan: geser samping, Toyota 8FBET 16 Load capacity: 1600 kg Year of manufacture: 2015 Side shift Lifting height: 3300 mm Lowered mast height: 2150 mm Duplex mast Operating hours: 6019 Ijdpfx Aorwx R Ssm Rjau 48V battery from 2019 Charger included 3-wheel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 4.394 h, TOYOTA 8FBE15T forklift Iedpjvx Nitjfx Am Reau Operating hours: 4,394 Year: 2016 Includes charger S015066

Kondisi: sangat baik (bekas), Motor 0.75 Number of spindles: 4 Maximum material thickness: 11 cm Iaedpetrtz Tjfx Am Rju Number of pawls: 3

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Haver & Boecker SWA/MECII-20 Loading System Haver & Boecker SWA/MECII-20 bulk loading system with weighing unit for loading trucks or railcars with free-flowing bulk materials. Suitable for free-flowing, non-dusty bulk goods. Description Manufacturer: Haver & Boecker Model: SWA/MECII-20 Year: 2003 Temperature limits: -10 °C / 40 °C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg Min 10 kg Dimensions: Section I L2.43 x W187 x H310 Ijdpfxog Sfa Te Am Rsau Section II L240 x W240 x H310 Haver net weigher with frame Weighing and evaluation electronics MEC II-20 for controlling weighing and/or machine functions Advantages • High operating comfort • Easy programmability • PTB and OIML approval • 99 product memory slots • Operator guidance via plain text display in 6 selectable languages Operating terminal BT 15 For automatic remote variety adjustment, incl. motorized adjustment of bag length/width parameters. Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Kondisi: baik (bekas), Rehsler TW HL4006D Kälteanlage Ijdexg Hmnopfx Am Rjau

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Zwick-Z2.5-Zwicki-EN Iedpfeykpamsx Am Roau

Jam operasional: 3.888 h, Kondisi: baik (bekas), heraeus-bewitterungspruefgeraet-xenotest-1200-cps Iajdpfxoxal Has Am Rju

Kondisi: bekas, Tahun pembuatan: 1996, Double-spindle contour milling machine by Bacci, model CP CNB, equipped with 4 right-side units and 4 left-side units (2 for milling and 2 for sanding on each side). Iasdpfxorzgppe Am Reu

Kondisi: bekas, Tahun pembuatan: 2001, Wheel diameter - max. 400/500 mm CNC control system: GE FANUC Series 160i-M Pinion diameter - max. 400 mm Ring gear diameter - max. 500 mm Iaodpfxevxwxce Am Rou X-axis travel: +/- 70 mm Y-axis travel: 200 mm Z-axis travel: 200 mm Axis angle: 90 degrees Speed range: R T min Rated current: 30 kVA Machine weight: approx. 6.2 t Space requirement: approx. 3.2 x 2.5 x 2.3 m

Kondisi: bekas, Used, excellent condition, low hours Manufacturer: Hettich Model: Blue Max mini PM Pneumatic feed Location: 97447 Gerolzhofen, ex stock, unloaded, unpacked Delivery in as-is condition as inspected, without warranty or guarantee. Iaedpfx Aovwf Dqom Reu

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Iodpfx Amjv Npw Ej Rsau air connection 6 bar fully automatic pneumatic control with foot pedal additional switch for chip removal program T-drilling head with 7+2 drilling spindles, 32 mm pitch shank diameter of drill bits 10 mm 90° swiveling with locking mechanism undercarriage/mobile base

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.600 mm, tinggi total: 1.250 mm, Daya motor: 0,75 kW dengan kepala bor untuk pengeboran bantalan sudut dan olive deteksi ketinggian otomatis Iedpsx Ez Uaofx Am Rsau

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 0032703, Aksesori: - Pelat pembanding 63,3 HRC Iaedpfxex E U U Hj Am Rju - Pelat pembanding 58,5 HR30N - Bobot uji 150, 100, 60, 45, 30 kgf - Bobot gaya pramuat - Landasan-V - Waterpas - Penusuk berlian - Penusuk bola baja 1/8" - Bola baja pengganti 1/8" - Penutup pelindung debu - Manual pengoperasian Penusuk berlian sedikit rusak di bawah ujungnya (pecah kecil – lihat foto).

Kondisi: baik (bekas), Bosch diffusion welding machine This system was designed for the following application: Diffusion welding machine for producing the connection between armature lead and commutator for starter armatures by means of diffusion welding. Iajdpfxsg Icfpj Am Rsu Diffusion welding machine (also known as polymer diffusion welding unit, diffusion welder, copper soft welding unit, copper strip welding unit), consisting of main machine and control unit, "PLC control, touchscreen operation." Process description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the carrier and aligns it in the welding position. The loading gripper takes over the armature and places it in the welding chuck. The welding chuck moves the armature into the welding position. Contact and welding cylinders come together and the first weld is performed. This process repeats until the armature is fully welded. The welding chuck moves the armature to the transfer position, where the unloading gripper picks up the armature and places it back on the raised carrier. The workpiece carrier is lowered. Workpiece carriers with OK armatures continue along the conveyor system; NOK armatures are transferred to the removal conveyor. On one welding machine, the OK armatures are marked with a color stamp on the face side of the commutators to identify from which welding machine they were produced during the final inspection. Technical Data: Diffusion Welding Machine Power Data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Main fuse: 35A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet: Depth: 1,800 mm Width: 3,100 mm Height: 2,700 mm Weight: 3,000 kg Year of manufacture: 2016 Financing is also possible through our bank. komplett-konzept.leasingo.de You will find more items - new and used - in our shop! International shipping costs on request!

Tahun pembuatan: 2025, Kondisi: baru, Pull / Universal Testing Machine Testing Force 5 kN, excellent WINDOWS software (freely programmable test sequences), over 600 ready-made test results. GALDABINI: over 30,000 machines delivered worldwide / more than 1,000 in Germany Important note before buying used universal / tensile testing machines: WIN XP / WIN 7 are "obsolete"; these expensively purchased machines "must" be modernized (electronics, software for WIN10/11, DC disc-armature motor + motor controller). The total cost for purchase, transport, retrofit, commissioning, and subsequent adjustments can turn into an expensive dead end. And a year later, the gearbox may fail, which can no longer be procured (...?). New GALDABINI universal testing machine with 2-year warranty, BECKHOFF electronics / premium testing software are often more cost-effective, comply with ALL standards, and are universally suitable for: * Tensile tests, compression tests, bending tests, cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screws * Load cells from 1/100 error 0.5% | 1/500 error 1% * and more. Iasdpfsdb Nfpex Am Rju Machine price WITHOUT clamping fixture – this must be selected according to your testing application. Price includes: - Machine fully operational with 2-year warranty - Force accuracy: 0.05 to 5 kN