Beli Perangkat Uji, Mesin Penguji bekas (82.005)

Kondisi: baik (bekas), Tahun pembuatan: 1965, Measuring machine, manual Erichsen cupping testing machine, cupping tester, sheet metal testing machine -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm Hedpfsw H N Dlex Aanonl -Weight: 20.5 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, High-Voltage Test Bench Safety Tester - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S electrical safety tester, a new-generation EATON model, is based on ARM Dual Core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of production quality assurance and goods-in inspection. The sequence function facilitates operation of the SEFELEC 506-S testing station when integrated into a test stand or bench. The new SEFELEC series 7” touchscreen provides simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC Hnodpfjxqxt Isx Aanol - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic test sequence selection - Sequence mode for combining multiple successive tests Dielectric strength at 5kVAC 500VA and 6kVDC Detection by current threshold or current fluctuation (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE test at 32A - 8VAC, measurement 0 ... 1Ω Optional: 50A test current Programmable test ramps Ramp-up, hold, ramp-down Multi-ramp mode, up to 7 stages TFT touchscreen 7”, 16 million colors, for programming as well as displaying active test procedures and results Integrated ARM Dual Core Control & 3D NAND technology for optimal accuracy, stability, and repeatability Integrated DSPs enable faster test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for measurement, control, and laboratory electrical equipment — Part 2-034: Particular requirements for measurement equipment used for testing insulation resistance and dielectric strength) Shipping possible on request. #8312-1

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Safety Tester with Scanner for High Voltage Test Bench - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON model of the latest generation, is based on ARM Dual Core technology components and controlled by DSP. This technology provides the operator with optimal stability and repeatability of measurements. High accuracy and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates operation of the SEFELEC 506-S test station when integrated into a test stand or bench. The 7" touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Option: IEEE488-2 Interface - Dual safety circuit SIL2 - Automatic selection of the test series - Sequence mode for combining several consecutive tests Dielectric strength up to 5 kVAC 500 VA and 6 kVDC Detection modes based on current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Option: 2 TΩ range PE (Protective Earth) measurement at 32A - 8 VAC, measurement 0 ... 1 Ω Option: test current 50A Programmable test ramps Hodjxqxw Tjpfx Aansnl Ramp-up, hold, ramp-down Multiple ramp mode, up to 7 stages TFT touchscreen 7”, 16 million colors, for programming and for displaying ongoing tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimum accuracy, stability, and repeatability Integrated DSPs enable higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Particular requirements for testing and measuring circuits) Shipping possible by arrangement. #8312-2

Jam operasional: 3.888 h, Kondisi: baik (bekas), heraeus-bewitterungspruefgeraet-xenotest-1200-cps Hnodpfxoxal Haj Aansl

Tahun pembuatan: 1968, Kondisi: baik (bekas), 1 used thread whirling unit for lathes Manufacturer: Burgsmüller Type: L 2 Hsdpfxspit Afo Aanjnl Serial number: 68/1724

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, jam operasional: 6.533 h, Linde H80T-02/900 LPG Forklift Hnjdovkn Dtopfx Aanel Year of manufacture: 2015 Serial number: H2X396F51535 Load capacity: 8,000 kg Own weight: 16,230 kg Solid rubber tires Duplex mast Lifting height: 3,500 mm Operating hours: 6,533 h Power: 72 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 4.394 h, TOYOTA 8FBE15T forklift Operating hours: 4,394 Year: 2016 Includes charger Hedjvx Nitspfx Aanenl S015066

Kondisi: siap digunakan (bekas), Stasiun Pengujian Saklar - 3x titik pengujian untuk pengujian saklar perangkat - Tegangan: 0-600V AC / DC - Beban arus: maks. 40A - Pengoperasian saklar uji dengan silinder pneumatik Hnodpfxjx I Ef Uj Aanol - Pengujian dengan beban ohmik dan induktif sesuai EN 61058 (VDE 0630) - 1x ruang pemanas (oven) untuk pengujian pada suhu lingkungan hingga 125°C - Pengujian saklar perangkat dengan data nominal 250Vac / 16(4)A / 125°C Pembongkaran mandiri!

Kondisi: bekas, de|hu|1 Hnsdpsw Rkybjfx Aanjl

Kondisi: sangat baik (bekas), Liebisch Type: K1000 M-TR / 4203.6101 USED Liebisch K1000 M-TR Constacon – Manual Chest-Type Unit Corrosion/Condensation Test Chamber (Chamber volume: 1000 l) Item Description: For sale is a used Liebisch K1000 M-TR, a robust and high-quality chest-type unit designed for conducting condensation water tests. Ideally suited for laboratories, quality control, or industrial applications. Technical Data & Features Model Variant: Constacon K 1000 M-TR – Condensation Water Test Chambers without Ventilation Chamber volume: approx. 1000 liters Operating mode: Manual (Type M-TR) External dimensions (W × D × H): 2600 × 1120 × 1210 mm Internal chamber dimensions (W × D × H): 1535–1425 × 800–780 × 660–650 mm Test Standards: For condensation (Constacon): DIN 50958, DIN EN ISO 6270-1/-2 Control: Simple manual control panel – parameters such as temperature and operating mode are set directly on the unit. Temperature Control: PID-regulated, typical setpoints: Condensation tests: approx. 40 °C (up to max. 50 °C) Heating time: approx. 1 hour Weight: approx. 400 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the data and specifications!) For further questions, we will be happy to answer your call. Hedpfx Aaew Tbdpjnsnl

Kondisi: bekas, SincoTec Model: POWER SWING 100 MOT Big Table The POWER SWING 100 MOT by SincoTec is a high-performance resonance testing machine designed for fatigue testing of materials and components. The system enables dynamic load testing with high forces (up to ±100 kN) with precise control. Typical applications include lifetime testing, vibration fatigue testing, and component validation under realistic conditions. Thanks to its robust construction, precise sensors, and a stable granite table, the test bench is ideal for research, development, and quality control in both industry and academia. Notes: This resonance testing machine is ideally suited for dynamic material and component testing. Technical data: General – Test Bench: Total height: 1215 mm (without clamping device) Width: 2005 mm Depth: 1205 mm Maximum force amplitude: 50 kN Maximum total force: ±100 kN Sensor accuracy: at least Class 1 (according to DIN EN 10002-3) Hnedexrlkvspfx Aansl Control Cabinet: Total height: approx. 1800 mm Height of table surface: 1080 mm Width: 650 mm (narrow table) / 1420 mm (wide table) Depth: 700 mm Weight: 180 kg (with granite tabletop approx. 240 kg) Colour: RAL 9006 (white aluminium), tabletop midnight Installation requirements: Required space: 4.3 × 3.0 m Required ceiling height: min. 2.5 m Floor load capacity: 2.0 t/m² Power supply: 400 V / 50 Hz (three-phase current, clockwise rotation) Connection: CEE 5-pin, 16 A Fuse: 16 A Weight: approx. 3.6 t Condition: used Scope of delivery: (See image) (Technical data and specifications subject to change and errors!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), RMS Electrodynamic Vibration Test System We offer you an RMS electrodynamic vibration test system. RMS Vibrations Test System Test Manager SWR 900 Vibration Exciter SW 3006 30V-50A-3434 N Power Amplifier TGA 3000-000.00 Condition: used Untested! Testing was not possible. Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) Hnodegk I I Tspfx Aanel For further questions, we are available by phone. Written orders are possible by email or fax.

Kondisi: sangat baik (bekas), We are offering you a Zwick / Roell universal testing machine (tabletop tensile testing machine). Zwick / Roell materials testing machine Model: BDO-FB0.5TH - Load testing in tensile/compression direction: 500 N - Height: 1565 mm, Width: 292 mm, Depth: 469 mm - Test area width: unlimited - Test area depth: 100 mm - Max travel without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection for operation: COM 1 Hodpfx Aaed Sr S Ienjnl - Power supply: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used - Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Kondisi: baik (bekas), 1 Hjdpfx Asw Ib Uweanonl

Kondisi: bekas, Zwick / Roell Model: LTM10 Max. test frequency: 100 Hz depending on amplitude Dynamic test force in tension/compression: 10 kN Hnodpfsv Ifgtox Aanel Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeatability accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test area height without load cell: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: as per maintenance requirements, partly by Zwick/Roell Accessories: screw grips, software (TestXpert research) Power supply: 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) We would be happy to answer any further questions by phone.

Kondisi: bekas, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer maintenance performed General Information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance regularly performed by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance documentation available - Ideal for research, testing, and development applications Technical Specifications – Test Bench Feature / Value Total height (test bench): 1215 mm (without clamping device) Width (test bench): 2005 mm Depth (test bench): 1205 mm Maximum force amplitude: 10 kN Maximum total force: ±20 kN Transducer accuracy: min. Class 1 (DIN EN 10002-3) Technical Specifications – Control Cabinet Feature / Value Total height (control cabinet): approx. 1800 mm Height of worktop: 1080 mm Width (control cabinet): 650 mm (narrow worktop) / 1450 mm (wide worktop) Depth (control cabinet): 700 mm (narrow worktop) / 800 mm (wide worktop) Weight: 152 kg (small worktop), 187 kg (large worktop), with (granite plate) 247 kg Site Requirements Feature / Value Required footprint: 4.3 × 3.0 m Required ceiling height: 2.5 m Floor load capacity: 234 N/cm² Electrical Requirements Feature / Value Voltage: 400 V three-phase with neutral conductor and protective earth Phase sequence: clockwise Voltage fluctuation: ≤ ±10 % Short term interruptions: < 20 ms EMC limit: Interference level A according to VDE 0871 Frequency: 50 Hz ± 1 % Protective earth / grounding resistance: < 0.3 Ω Connection and Protection Hnedpfx Aaexrffajnel Feature / Value Power supply: 400 V / 50 Hz (clockwise phase sequence) Connection plug: CEE socket, 5-pin, 16 A Protection: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to change and errors in technical data. All information is subject to confirmation!) If you have any further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Zwick Type: BZ2.5/TN1S Zwick Tabletop Testing Machine for Tensile Strength Measurement Application Range: Wide range of applications, from the testing of plastics and elastomers, to paper, textiles, foam, wire, and component testing. Load Frame: Maximum test force FN in tension/compression: 2.5 kN Height (h1): approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Workspace height h min ... h max: Crosshead bracket mounted facing upwards: 227 ... 573 mm Crosshead bracket mounted rotated by 180°: 57 ... 403 mm (each without connecting bolts) Connections: Electrical connection: 115/230 V 4/2A-1PH/PE/N Hedpfx Aaefnm Dqononl Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change; errors and omissions excepted!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), zwick-bt1-fr050th-a1k-50kn-material-testing-machine-used Hnedpfsw S Hvzjx Aanjl

Kondisi: bekas, SincoTec Type: Exciting Mot Resonance Test Bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a two-mass oscillator. It consists of an oscillation head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillation head is located in the upper part of the machine and generates the dynamic amplitude. The oscillation head is supported by preloaded compression springs on the upper crossbar and is guided centrally. The middle load drive is located in the lower part of the machine and applies the static preload via a geared motor and spindle drive. The specimen chamber is situated above the clamping table and is bounded at the top by the adjustable crosshead. Control of the test bench is handled by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and complies with protection class IP 50 according to EN 60529. Technical Data: General test bench data: Total height test bench: 1840 to 2240 mm Height of machine table: 1030 mm Width of test bench: 800 mm Depth of test bench: 1500 mm Specimen chamber height: max. 600 mm (without force transducer) Clear column passage: 550 mm Maximum force amplitude: 10,000 N Maximum total force: ±20,000 N Maximum oscillation amplitude: ±5 mm Test frequency: 30 to 110 Hz Transducer accuracy: at least Class 1 (according to DIN EN 10002-3) Test bench weight: approx. 1,880 kg Max. fixture weight: 150 kg General control cabinet data: Total height control cabinet: 1,900 mm Height of table top: 1,080 mm Control cabinet width: 650 mm Control cabinet depth: 700 mm Weight of control cabinet: 152 kg Color: RAL 9006 (White Aluminium), table top Midnight Site requirements: Space requirement: 2.5 x 2.5 m Required ceiling height: 2.8 m Floor load capacity: 170 N/cm² Power supply: 400 V / 50 Hz (clockwise rotation field) Connection plug: CEE connector, 5-pole, 16 A Fuse protection: 16 A Connection and environmental conditions Network conditions: Voltage: 400 V three-phase with neutral conductor and protective earth, clockwise rotation Voltage fluctuations: < ±10% Short-term voltage dips: < 20 ms Limits for continuous interference emission: Radio interference level A according to VDE0871 Frequency: 50 Hz ±1% Protective earth: earth resistance < 0.3 Ω Hodpfjvx Su Ssx Aanjnl Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data; details are subject to confirmation!) Further questions are welcome by phone.

Kondisi: sangat baik (bekas), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This device is used to test for water ingress into enclosures. When used with a timer switch, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Compliant with DIN VDE 0470 Part 1 and EN 60529 for testing according to protection classes IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swiveling and replaceable nozzle holders - Adjustable and measurable water flow rate - Test duration control Specifications for Mechanical Load Maximum load with test specimens (evenly distributed): - Permissible test specimen weight for tray (total): 25 kg - Spray radius: 200 mm / 400 mm Specifications for IP Protection Degree Testing - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ± 60° - Oscillation angle IPX4: approx. ± 180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data Hnedpfxoxg Hrke Aanel - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the specifications!) If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Haida Model: HD-B604-S Sensor: TECSIS load cell Max. capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Hodpfx Aasr Ixq Rensnl Max. stroke: 700 mm (without device) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping range: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) We will be happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), offered with comprehensive equipment. This system is ideal for performing tensile, compression, flexural, and component tests and comes with original Zwick software, accessories, and a safety screen. Complete System - Includes safety screen (CE-compliant, with electric interlock) - Extensive accessories and software included Technical specifications of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Working area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Includes connection card for load cell (additional slot for upgrades available) Expandable with options and modules Safety – Safety Screen (included): - Suitable for ProLine Z005TN, Z010TN, Z020TN - With electrical interlock and additional manual locking Hjdpsw Uifdefx Aansnl - 6 mm thick Makrolon screen, pivoting (hinged left) - CE-compliant - Mandatory for applications with risk of injury to the operator Load Cell: Xforce HP load cell, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely high linearity

Kondisi: baik (bekas), Bosch diffusion welding machine This system was designed for the following application: Diffusion welding machine for producing the connection between armature lead and commutator for starter armatures by means of diffusion welding. Diffusion welding machine (also known as polymer diffusion welding unit, diffusion welder, copper soft welding unit, copper strip welding unit), consisting of main machine and control unit, "PLC control, touchscreen operation." Process description The workpiece carrier enters the station and is lifted. Hnjdpfog Icfpsx Aansl The alignment gripper picks up the armature from the carrier and aligns it in the welding position. The loading gripper takes over the armature and places it in the welding chuck. The welding chuck moves the armature into the welding position. Contact and welding cylinders come together and the first weld is performed. This process repeats until the armature is fully welded. The welding chuck moves the armature to the transfer position, where the unloading gripper picks up the armature and places it back on the raised carrier. The workpiece carrier is lowered. Workpiece carriers with OK armatures continue along the conveyor system; NOK armatures are transferred to the removal conveyor. On one welding machine, the OK armatures are marked with a color stamp on the face side of the commutators to identify from which welding machine they were produced during the final inspection. Technical Data: Diffusion Welding Machine Power Data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Main fuse: 35A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet: Depth: 1,800 mm Width: 3,100 mm Height: 2,700 mm Weight: 3,000 kg Year of manufacture: 2016 Financing is also possible through our bank. komplett-konzept.leasingo.de You will find more items - new and used - in our shop! International shipping costs on request!

Kondisi: bekas, Used, excellent condition, low hours Manufacturer: Hettich Model: Blue Max mini PM Pneumatic feed Location: 97447 Gerolzhofen, ex stock, unloaded, unpacked Hjdpfxevwf Dqo Aanenl Delivery in as-is condition as inspected, without warranty or guarantee.

Kondisi: bekas, 1 Hnsdpox A Aa Asfx Aansl