Beli Ard Mesin Mati Tenggelam bekas (84.500)

Kondisi: bekas, Thread Cutting Machine HAGEN & GOEBEL Type HG 10 Thread Cutting Machine, Vertical Tapping Machine Machine No. 4462 Year of manufacture: approx. 1980 Thread cutting capacity in steel: M3 to M10 Lrsdpfjupbf Dsx Aa Uol Thread cutting capacity in cast iron: M3 to M16 Thread cutting capacity in brass: M3 to M18 mm Throat depth: 250 mm Quill stroke: 80 mm Table size: 340 x 240 mm Spindle speed: 200-1000 rpm, 6 steps Motor power: 0.55 and 0.75 kW Power supply: 380 Volt, 50 Hz - 6 speed settings thanks to 2 motor speeds and 3 belt stages - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle taper: Ø 14.8 to 16 mm with 4 mm keyway - Table height adjustment with rack and handwheel on round column - Quick-change tap chuck, size 1, Ø 19 mm Required space (L x W x H): 850 x 550 x 1800 mm Weight: 255 kg Good condition

Kondisi: bekas, Oscillating Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary Table, Indexing Table with SIEMENS Control Machine No. P 81 - 5458 Year of Manufacture: 1982 / 2009 Maximum Rivet Shank Diameter: 12 mm Tool Shank Diameter: 16 mm Throat Depth: 190 mm Rivet Head Stroke per Riveting Unit: approx. 60 mm Lrodpfx Aodzp T Nja Uol Rivet Spindle Speed: approx. 1400 rpm Installation Height Tool - Counter Tool: max. 80 mm Compressed Air Requirement: 6 bar Motor Power per Riveting Unit: 1.1 kW Power Supply: 380 Volt, 50 Hz - Rotary Table, Indexing Table with Servo Drive, step size programmable via Siemens PLC control - Double riveting unit adjustable within the machine frame relative to the rotary table - Table diameter Ø 295 mm for accepting round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with leadscrew, positioning by adjustable microswitch - Control system modernized and conversion to servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel – year 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the counter-rotating riveting units: 0-60 mm Space requirement (L x W x H): 3200 x 1250 x 2400 mm Weight: approx. 2500 kg Good condition The machine was used for riveting segmental saw blades from Ø 400 to Ø 2000 mm. The segments were manually positioned onto the carrier disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table rotates automatically to the next working position. Ideal for saw blade manufacturers and repair shops. Also suitable as a basis for constructing a special-purpose machine.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 450 kg, Perlengkapan: dokumentasi / manual, HSM VK 4812 P Ledjy Udzhepfx Aa Uorl Year of manufacture: 2017 Fully automatic baler. The machine has undergone service and maintenance by an authorized HSM Service Center with a branch in Germany. Baler operation after extensive maintenance work – details available upon direct contact. The baler is supplied complete with a ramp for discharging finished bales and stands for binding wire. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Pressed materials: Film, mixed paper, cardboard, punching waste Bale tying: 4-fold with wire We also have other balers in stock. Transport costs depend on weight, volume, and especially distance; for inquiries, the following information is important: delivery address (postal code and city name). For further details, telephone contact is required, so please inquire about transport costs and shipping options by phone. Our contact details can be found in the seller's legal notice. We sell and export worldwide and, thanks to our large storage capacity, can deliver larger quantities flexibly and quickly. We issue intra-community invoices – VAT exempt. Business hours: Mon-Fri: 8:00 am – 4:00 pm Sat: closed

Kondisi: bekas, Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 119, daya motor spindle: 5 W, panjang pembubutan: 160 mm, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 99 rpm, diameter pembubutan: 16 mm, berat keseluruhan: 2.300 kg, jenis arus masuk: tiga fasa, saluran batang: 16 mm, lebar total: 1.340 mm, panjang total: 1.850 mm, tinggi total: 1.685 mm, tegangan masuk: 380 V, Jumlah stasiun alat bermotor di turret alat 1: 6, Jumlah stasiun alat bertenaga di turret alat 2: 6, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Dijual mesin bubut panjang saya, beserta aksesoris yang terlihat di gambar. Dilengkapi dengan penyedia batang dan konveyor serpihan. Kontroler mesin merek Yasnac. Mesin ini memiliki dua kepala revolver, sehingga mampu melakukan kontrol Multi-axis dan Multi-group. Lrjdpfxsy Udcfo Aa Uol

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mesin dalam kondisi teraliri listrik dan dapat diperiksa Lrjdpfxoy Eb Rhe Aa Uel

Kondisi: baik (bekas), Tahun pembuatan: 2002, Mesin dalam kondisi baik dengan kontrol Fanuc Series 16i-T, dilengkapi dengan feeder batang otomatis FMB Turbo 5-42. Lrjdpfxoy Eb N De Aa Ujl

Kondisi: siap digunakan (bekas), vertical press with four columns. The press platen is electrically driven, and the lower platen—together with the tool—can be pulled out. - Dimensions: 2100 x 1600 x 3000 mm Lrsdpfjtty Nkjx Aa Uol - Platen size: 950 x 1120 mm - Electrical data: 380 V; 43 A; 22 kW

Kondisi: sangat baik (bekas), NOMOR KATALOG: 7992 DATA TEKNIS - area pemuatan: 2 - penekan samping yang dapat diatur manual: 2x6 pcs - penekan vertikal pneumatik: 2x6 pcs - panjang maksimum elemen yang direkatkan: 3600 mm - tinggi maksimum elemen yang direkatkan: 1500 mm - ketebalan maksimum elemen yang direkatkan: 130 mm - panduan untuk perekat elemen tipis - dimensi (P/L/T): 4300x1570x2110 mm - berat: 1400 kg KEUNGGULAN – dua area kerja – panjang pengeleman 3600 mm – silinder pneumatik – panduan untuk perekat elemen tipis – belum dicat – mobil – dilengkapi roda – mesin press bekas, kondisi sangat baik Ledpfey Rq Uysx Aa Uorl Harga netto: 14.900 PLN Harga netto: 3.550 EUR Harga netto dihitung berdasarkan kurs 4,2 PLN/EUR (jika terjadi fluktuasi nilai tukar yang signifikan harga dapat berubah)

Kondisi: sangat baik (bekas), NOMOR KATALOG 7993 DATA TEKNIS - bidang muat: 2 Lrjdoy Rq Imjpfx Aa Ujl - penekan samping yang dapat disetel manual: 2x4 unit - penekan vertikal pneumatik: 2x4 unit - panjang maksimum elemen yang direkatkan: 2500 mm - tinggi maksimum elemen yang direkatkan: 1330 mm - ketebalan maksimum elemen yang direkatkan: 110 mm - panduan untuk merekatkan elemen tipis - dimensi (P/L/T): 3000x1350x2000 mm - berat: 900 kg KEUNGGULAN – dua area kerja – panjang perekat 2500 mm – silinder pneumatik – panduan untuk merekatkan elemen tipis – tidak dicat – mobil – dilengkapi roda – press bekas, kondisi sangat baik Harga netto: 13.900 PLN Harga netto: 3.300 EUR Harga netto dihitung dengan kurs 4,2 PLN/EUR (dalam hal fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: sangat baik (bekas), Pemotong Kepala Otomatis Sormac WOA-3, tahun produksi 2013. Mesin ini dirancang untuk memproses wortel dengan diameter 35 hingga 45 mm dan panjang 175-350 mm. Mesin memotong bagian atas dan ujung wortel. Mesin juga dapat memotong wortel menjadi potongan sepanjang 100 atau 50 mm. Berat mesin 2.500 kg. Dimensi: panjang 4.250 mm x lebar 2.400 mm x tinggi 1.710 mm. Udara tekan: 6 bar. Motor penggerak: 1,1 kW. Motor spindel: 2 x 0,55 kW. Konveyor pengangkut: 2 x 0,55 kW. Harga yang tertera adalah per unit, tersedia 3 unit untuk dijual. Ljdpfjynum Tex Aa Ujrl

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Diameter batang (maks.): 32 mm, INDEX MS32P CNC Multi-Spindle Tahun Pembuatan: 2001 Nomor Seri: 150127 Bar Feeder: IEMCA SIR-MS32/33/P (3 Meter) Kontrol: Siemens 840D Konveyor Serpihan Knoll Terintegrasi Unit Filtrasi Tekanan Tinggi Knoll Eksternal 6 Spindel Kapasitas 32mm 1 Sinkron Lrsdoy Ruu Depfx Aa Uol Konfigurasi Performa Tinggi 6+1 Kemampuan Back-Working: Dilengkapi dengan spindel sinkron yang dapat berputar untuk pemesinan bagian belakang secara simultan. Proses Selesai pada Satu Mesin: Memungkinkan pengeboran, tapping, dan milling pada sisi cutoff saat bagian berikutnya sedang dikerjakan di spindel utama, menghasilkan produk jadi secara langsung. Keunggulan Quill "P": Model "P" menggunakan quill hidrostatik (sumbu Z).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Dijual mesin GEVO SE5-2E/Z untuk industri kusen jendela. Perangkat ini dibeli untuk proyek tertentu yang pada akhirnya tidak dilaksanakan. Mesin hanya digunakan beberapa kali, sehingga kondisinya masih sangat baik. Sejak pembelian, penggunaannya jarang. Data dari pelat nama: Produsen: GEVO Tipe: SE5-2E/Z No. seri: 571 Tahun produksi: 2021 Tekanan kerja: 7 bar Kecepatan: 2500 rpm Negara produksi: Jerman Mesin ini berasal dari perusahaan Stolpex – machinery for windows. Dijual sebagai barang bekas. Kondisi sesuai dengan foto. Dapat dilihat sebelum pembelian dengan perjanjian terlebih dahulu. Lrjdpey T Eu Hjfx Aa Usl Perangkat ini ideal untuk pabrik yang memproduksi atau memproses kusen jendela.

Kondisi: bekas, Tahun pembuatan: 2018, Mesin Etiketing Otomatis, Pemberi Label Macro SP12 kanan RA1956 Produsen: Schwinn Model: Macro SP 12 Tahun: 2018 Arah: kanan Lebar label: hingga 115 mm Kecepatan pelabelan: 1–18 m/menit Diameter maksimum rol label: 300 mm Diameter inti: 40 mm, dapat ditingkatkan dengan adaptor Ledpfek Abm Ajx Aa Uorl Koneksi: Colokan Euro 230/50Hz Kontrol terintegrasi dengan parameter pengaturan, input dan output yang dapat dikendalikan, peringatan gangguan, dll. Perlengkapan tambahan: Pemicu mulai eksternal Modul Aplikator Vakum AP 010-500 Kombinasi alat perawatan Adaptor inti Peringatan stok label AP 031 Rangka pemasangan Kotak kontrol Lampu peringatan 3 tingkat

Kondisi: sangat baik (bekas), Dijual lini produksi lengkap untuk pembuatan sistem drainase hujan logam bulat. Produksi dimulai dari gulungan plat, lalu dibentuk, dicetak, dan dikemas. Semua mesin dalam kondisi sangat baik. Perangkat ini sepenuhnya lengkap dan ditujukan untuk produksi massal: • Talang air • Tutup ujung talang • Sambungan Lredpfx Aey I Tq Sja Usl • Sudut • Bracket/penahan • Sambungan pembuangan pipa air hujan • Elbow • Pipa pembuangan air hujan • Tee (sambungan T) • Pengemasan Jika Anda tertarik dengan perangkat yang ditawarkan, memiliki pertanyaan, atau ingin informasi lebih detail – jangan ragu untuk menghubungi kami. Kami dengan senang hati akan menyediakan daftar perangkat lengkap, spesifikasi teknis, foto tambahan, atau mengatur kunjungan ke lini produksi. Seluruh perangkat terhubung dan dapat diperiksa serta melihat seluruh proses produksi.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Bobst SPO 160 Vision ref 3002 tahun 2004 ukuran maksimum lembar: 1600x1100mm kecepatan maksimum: 4500 lembar/jam Lrodpfxsy Tpfvo Aa Ujl Sistem QUBE Unit stripping Pengiriman secara batch Kondisi kerja baik.

Kondisi: bekas, Mesin penutup RENZ ECL 360 dengan dispenser otomatis WP 300 untuk elemen jilid kawat spiral Lsdoy Rrykjpfx Aa Usrl

Tahun pembuatan: 2020, Kondisi: baru, An automatic car wash system is a solution designed to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It is designed to ensure that as little liquid as possible carries over into subsequent processes, saving money and enhancing wash quality. This is crucial, as the apparent savings achieved with systems not utilizing these solutions can lead to significantly higher disposal costs for chemicals and waste in the future. Attention should also be paid to maintaining proper bath parameters. Research and development have enabled us to design a car wash with an optional detail drying function, where, after washing, hot air is blown by a fan. The car wash features an advanced macro-programming system. Depending on the number of tanks, each macro can comprise up to 10 steps. Operations can be repeated and reordered as required. Each tank has its own icon and name, allowing operators to work intuitively. Lrsdpfx Aaofz I Hxs Uel Optionally, the tanks can be equipped with bath replenishment systems, which can be executed either between processes or at the end of the cycle. • Controls on a swivel arm for improved accessibility • PLC microprocessor control • 7" touchscreen control panel • A much higher number of nozzles compared to other solutions • (Option) Post-wash drying capability • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet steel, double-secured with limit switches • Control system for reliable sealing and full opening of dampers • Separate lines, nozzles, and tanks for each treatment step to minimize fluid mixing • Intelligent control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Tahun pembuatan: 2020, Kondisi: baru, An automatic car wash system is a solution designed to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It is designed to ensure that as little liquid as possible carries over into subsequent processes, saving money and enhancing wash quality. This is crucial, as the apparent savings achieved with systems not utilizing these solutions can lead to significantly higher disposal costs for chemicals and waste in the future. Attention should also be paid to maintaining proper bath parameters. Research and development have enabled us to design a car wash with an optional detail drying function, where, after washing, hot air is blown by a fan. The car wash features an advanced macro-programming system. Depending on the number of tanks, each macro can comprise up to 10 steps. Operations can be repeated and reordered as required. Each tank has its own icon and name, allowing operators to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be executed either between processes or at the end of the cycle. • Controls on a swivel arm for improved accessibility • PLC microprocessor control • 7" touchscreen control panel • A much higher number of nozzles compared to other solutions • (Option) Post-wash drying capability • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet steel, double-secured with limit switches • Control system for reliable sealing and full opening of dampers • Separate lines, nozzles, and tanks for each treatment step to minimize fluid mixing Ljdpfsfz Nbljx Aa Ujrl • Intelligent control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Tahun pembuatan: 2020, Kondisi: baru, An automatic car wash system is a solution designed to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It is designed to ensure that as little liquid as possible carries over into subsequent processes, saving money and enhancing wash quality. This is crucial, as the apparent savings achieved with systems not utilizing these solutions can lead to significantly higher disposal costs for chemicals and waste in the future. Attention should also be paid to maintaining proper bath parameters. Research and development have enabled us to design a car wash with an optional detail drying function, where, after washing, hot air is blown by a fan. Lredpfxjfy T Rco Aa Uel The car wash features an advanced macro-programming system. Depending on the number of tanks, each macro can comprise up to 10 steps. Operations can be repeated and reordered as required. Each tank has its own icon and name, allowing operators to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be executed either between processes or at the end of the cycle. • Controls on a swivel arm for improved accessibility • PLC microprocessor control • 7" touchscreen control panel • A much higher number of nozzles compared to other solutions • (Option) Post-wash drying capability • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet steel, double-secured with limit switches • Control system for reliable sealing and full opening of dampers • Separate lines, nozzles, and tanks for each treatment step to minimize fluid mixing • Intelligent control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, cnc-gildemeister-sprint-20-8 Ljdpsy Rngaefx Aa Uorl

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, CNC long-turning automatic lathe GILDEMEISTER SPRINT 20/8 linear Equipped with Fanuc 31i control Year of manufacture: 2016 Spindle bore: 20 mm MAIN SPINDLE Max. turning diameter: 20 mm Speed range: max. 10,000 rpm Z1 stroke: 80 mm SUB SPINDLE Max. turning diameter: 20 mm Z2 stroke: 300 mm Speed: max. 10,000 rpm SLIDE 1 X1 stroke: 50 mm Y1 stroke: 350 mm 6-position tool holder 12 x 12 5 live tools including spindles with ESX 16 collet chuck SLIDE 2 X2 stroke: 240 mm 4-position tool holder for external machining with 12 x 12 interface 4-position tool holder for internal machining, diameter 20 mm 5 live tools including spindles with ESX 16 collet chuck 6 + 2 axes, 2 Y-axes standard Linear drive for maximum precision Includes the following accessories: Full enclosure with internal lighting Various tool holders C-axis for main and sub spindle Bar feeder LNS Quick Load Servo 80 S2 Part discharge conveyor Hinged belt chip conveyor 4-color signal tower Fire extinguishing system Coolant unit 250 l (Pump capacity 120 l/min, 1.5 bar) Lodpfx Aaey Rm Sno Uorl THE MACHINE IS IN EXCELLENT CONDITION!! THE MACHINE HAS ONLY 4,426 PROGRAM RUNNING HOURS!!

Kondisi: baik (bekas), listing-translation-01 Lrsdpjy Nfh Sefx Aa Uel

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar sabuk konveyor: 635 mm, masa garansi: 24 bulan, lebar total: 3.700 mm, panjang total: 1.235 mm, tinggi total: 1.250 mm, tegangan masuk: 400 V, panjang meja: 3.320 mm, berat kosong: 280 kg, lebar bukaan: 45 mm, lebar kerja: 635 mm, panjang rol: 660 mm, kebutuhan tinggi: 2.170 mm, persyaratan ruang panjang: 1.235 mm, lebar yang dibutuhkan: 2.150 mm, en-Neumaschine-Rondostar-4000-ECO New Machine – Rondostar 4000 ECO Successor model to the SFE 6607H Advantages: + Premium quality, made in Switzerland, with 2-year warranty + Machine features a fully stainless steel housing + Equipped with automatic flour duster + Automatic roller adjustment + Automatic winding unit + Dough sheet is wound without significant tension + Integrated electric motor + High-quality synthetic conveyor belts, easy to clean + Easily movable, with swivel castors and locking feet for stable positioning + Operation via touch panel + Computer control (100 programs) and manual operation via push buttons available + Tables can be folded up on both sides + Scrapers can be removed easily and without tools + Machine is equipped as standard with one manual winding unit + Manual winding unit supports left and right + Equipped with dough catching trays on both sides Technical Data: - Dough piece weight: max. 15 kg (depending on product) - Belt width: 635 mm - Roller width: 660 mm - Safety guard clearance: 90 mm - Table length: 3,320 mm - Roller adjustment: from 0.2 mm up to 45 mm (depending on product) - Speed: approx. 85 cm/sec - Motor power: 1.1 kW / 2 kVA - Electrical requirements: 400 V – 3Ph – 50/60Hz - Protection: 16A CEE plug - Dimensions: --- Working position: 3700 x 1235 x 1250 mm (WxDxH) --- Rest position: 2150 x 1235 x 2170 mm (WxDxH) - Net weight: 310 kg Lredpfx Aasivdmbe Ujl

Kondisi: baru, Tahun pembuatan: 2026, daya: 2,2 kW (2,99 hp), ketinggian potong (maks.): 300 mm, lebar pemotongan (maks.): 560 mm, jenis kontrol: manual, rentang pivot: 60 °, jenis aktuasi: hidrolik, kecepatan rotasi (maks.): 100 rpm, kecepatan rotasi (min.): 80 rpm, Perlengkapan: Penandaan CE, dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, CRONOSS 300X560 YDG Pivot Type, Semi-Automatic Band Saw Machine with Angle Cutting (Rotary Head) Ledpfx Aoyntzpea Uorl The CRONOSS 300X560 YDG is a robust, pivot-type semi-automatic band saw machine designed for medium-scale metal cutting operations. It features a rotary head enabling precise and repeatable angle cuts between 0° and 60°. A reliable cutting solution for steel construction workshops, machinery manufacturers, and metalworking facilities. Standard Features - Hydraulic vise - Variable speed control (Inverter driven) - Safety switches - Hydromechanical blade tensioning system - Infinitely adjustable angle cutting from 0° to 60° (Rotary Head) - Angle scale - Adjustable head descent system - 1 band saw blade included - 2 material support rollers Country of Origin: Turkey Available models with diameters ranging from 220 mm to 3000 mm. Technical Specifications – 300 YDG Capacity 90° - Round: 300 mm - Square: 300 x 300 mm - Rectangle: 300 x 560 mm Capacity 60° - Round: 200 mm - Square: 180 x 180 mm - Rectangle: 180 x 245 mm Capacity 45° - Round: 300 mm - Square: 235 x 235 mm - Rectangle: 235 x 360 mm Motor & Technical Details - Main Motor: 2.2 kW - Hydraulic Motor: 0.37 kW - Coolant Pump Motor: 0.09 kW - Band Saw Blade Size: 34 x 1.1 x 4100 mm - Material Feed Height: 809 mm - Vise Max Opening: 600 mm - Vise Min Closing: 0 mm - Roller Table Width: 615 mm - Dimensions (H x W x D): 1268 x 2035 x 2862 mm - Weight: 900 kg Production & Supply The CRONOSS 300X560 YDG is manufactured in Turkey. Customized capacities and configurations are available upon request. Please contact us for detailed technical information and a price quote. Suggested Keywords: Band Saw Machine, Semi-Automatic Band Saw, Pivot Type Band Saw, Rotary Head Band Saw, Metal Cutting Machine, Steel Cutting Band Saw, Industrial Band Saw, Hydraulic Band Saw, Angle Cutting Band Saw, 300 mm Band Saw, 300x560 Band Saw, Workshop Band Saw Machine, Structural Steel Cutting Machine

Kondisi: baru, Tahun pembuatan: 2026, diameter mata gergaji: 400 mm, Rentang pemotongan baja bulat pada 90°: 120 mm, Rentang pemotongan baja bulat pada 45°: 110 mm, kecepatan rotasi (maks.): 60 rpm, masa garansi: 12 bulan, kecepatan mata gergaji: 60 rpm, Rentang pemotongan baja persegi pada 45°: 110 mm, Kisaran pemotongan baja persegi pada 90°: 120 mm, diameter pemotongan: 120 mm, Perlengkapan: dokumentasi / manual, Semi-Automatic Double-Head Vertical Tube and Profile Cutting Saw Machine Product Overview The semi-automatic double-head vertical tube and profile cutting saw machine is designed for series, precise, and repeatable cutting of round tubes, square, and rectangular profiles in industrial production lines. The right saw head is fixed while the left saw head features an automatically moving structure controlled by a servo motor. Its gearbox system, suitable for heavy-duty applications, cast table construction, and precision cutting mechanism ensure stable cutting quality and extended machine lifespan. Key Features - Semi-automatic double-head vertical tube and profile cutting saw machine - Fixed right saw head; left saw head with servo motor-controlled automatic traverse - Left head system operating on roller-type linear guides - Heavy-duty helical gear reducer with hardened and ground helical gears - Vertical cutting movement of saw heads: - Ball screw - Servo motor controlled - Long-life and high-precision roller-type linear guide system - Cutting units mounted on complete cast tables - Variable-speed cutting: - Slow at entry - Fast in the middle section - Slow again at exit - This reduces the total cutting time by approximately 30% and extends saw blade life - Inverter-controlled saw rotation speed between 20 – 60 rpm - PLC-controlled color touchscreen panel Cutting Capacity (Tube & Profile) Maximum Saw Blade Diameter: 400 mm Cutting Angles and Capacities Angle Round Tube (max.) Square Profile (max.) Rectangular Profile (max.) 90° Ø 120 mm 120 × 120 mm 160 × 90 mm ±45° Ø 120 mm 110 × 110 mm 140 × 90 mm +60° Ø 110 mm 90 × 90 mm 90 × 90 mm Technical Specifications - Main Voltage: 400 V - Control Voltage: 24 V - Installed Power: 9.5 kW - Current: 35 A - Saw Motor: 3 kW - Coolant Pump: 0.06 kW - Air Pressure: 6 kg/cm² (240 l/min) - Saw Speed: 20 – 60 rpm (Inverter controlled) - Angle Rotation: 90° / ±45° / +60° Saw Blade Specifications - Saw Blade Diameter: 400 mm - Saw Blade Bore Diameter: 40 / 50 mm Ljdeyg H R Ijpfx Aa Uorl - Pin Holes: 4 – 15 – 80 Coating Options: - TiN: For medium-hard steels - TiCN: For high-hardness steels - TiAlN: For stainless steels Machine Dimensions & Weight - Width: 4200 mm - Depth: 1200 mm - Height: 1800 mm - Net Weight: 2520 kg - Gross Weight: 2540 kg