Beli Homag Bargstedt Garis Penumpukan / Pembongkaran bekas (2.902)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Working height: 900 mm Working width: 1,350 mm Belt change side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350-1,380 mm Adjustable abrasive belt blowing device, 5-step adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically moves to a 10 mm workpiece thickness and the blowing rotors are activated. After the feed belt has been completely cleaned, the machine returns to its original setting. AAT EXTRACTION SLIDE GATE CONTROL Control of extraction slide gates via the terminal (24 volts DC, without extraction slide gates) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1–3 PC Emergency power supply for belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – underside sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. Machine is pre-configured for up to two auxiliary units, such as cleaning brush, satin or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatic pressure roller adjustment, profiled steel roller, 240 mm diameter with grit compensation system Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatic pressure roller adjustment, rubber roller, 240 mm diameter Rubber hardness: 85° Shore with grit compensation system Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for mounting a pressure bar - Automatic locking of the sanding assemblies for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation - Protected storage on the machine for additional sanding tools Drive motor: 22 kW Abrasive belt speed: 2–18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BAR - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the front and rear workpiece edges - Various sanding inserts, 80 mm width, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, but additionally: FBM FINISH BRUSH Brush unit with finish brush Brush fill: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg Lrsdjyw Ndmopfx Aa Usl

Kondisi: baik (bekas), Tahun pembuatan: 2015, nomor mesin/kendaraan: 0-200-24-0779, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 55 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, panjang total: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left side. Year of manufacture: 2015 SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift at feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming, climb/contra-rotation, 2 x 4 kW, usage-controlled Horizontal positioning via NC motor (CAN) Ljdpfx Ajy A I Sgsa Usrl GLUING UNIT A20, consisting of: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA adhesive - Capable of processing both EVA and PUR adhesives - Edge magazine: min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) for edge thickness, 1 powered and 4 non-powered pressure rollers POST-PROCESSING SECTION: - PK25 cross-cutting unit, horizontal, 2 motors each 0.8 kW (front/rear edge), for chamfer/straight as well as excess edge trimming - Pre-/flush trimming unit 1.15 kW, top/bottom - FK11 profile trimming unit (corner rounding), 2 motors (top/bottom) with motorized fine adjustment, controlled via control panel Various interchangeable heads equipped with tools - Universal trimming unit 3.5 kW, controlled - Multi-profile scraper top/bottom - Flat scraper top/bottom - Buffing unit top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, 1 panel dividing saw with storage system Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore warehouse management software, offcut management, etc. Storage area approx. 37 x 11.5 m Stacking height in warehouse: max. 2,500 mm Speed Concept: sets completely new standards and revolutionizes the technology of panel dividing. + Significantly higher speed and dynamic acceleration of the saw carriage. + Enormous acceleration of the program fence. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized movement sequences via integrated gripper measurement system. Cutting length: 5,600 mm Cutting width (program fence travel): 5,600 mm Panel rotating device for head cuts Laser guide light: projects the cutting line onto the workpiece for visual alignment or scribe cutting. Lredpfx Aaeyw Ivhj Uol Lifting table loading Lifting table size: 5,600 x 2,200 mm PROFILINE VAC feed cart 5,600 mm Separate feed cart for gentle loading of sensitive single panels with vacuum, as well as efficient feeding of panel packs. Saw blade protrusion: 130 mm Saw carriage feed: forward 1–150 m/min reverse constant 150 m/min Program fence speed: forward/reverse 90 m/min (in EU countries, forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height adjustment: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device min. alignment width: 0 mm max. alignment width: entire cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700–4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT WITH LIFTING ELEMENT 2-FINGER 11/510/530 AUTOMATIC OUTFEED FENCE Program-controlled ejection of part packs into the air lift table area. FULLY AUTOMATIC SCORING SAW SETTING TYPE 530 camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and operation interface. Positioning accuracy: Groove depth continuously adjustable via control system (hydraulic stop). CUTOUT/RELIEF CUT PROGRAM LABELLING WITH PARTS GRAPHIC LABEL PRINTER TYPE PICA 108 Thermal/thermal transfer label printing station OPTIMIZATION SOFTWARE 'CAD-PLAN' -JUST-IN-TIME- Additional function 'Just-in-time' (possible operating modes): 1. Optimization at the saw - Import of part lists from sector-specific software, Excel, etc. - Inclusion of available offcuts in optimization - In case of production stoppage, unproduced parts can be re-optimized - Free selection of which parts with which material at what time are optimized and produced 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel dimensions - Combine runs, etc. A new optimization then runs directly on the saw. DATA TRANSFER ONLINE + USB PORT CAMERA MONITORING OF THE LOADING AREA Material specification for lifting table loading: Flatness max. 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Kondisi: baik (bekas), de-01 Lodpfx Aaeb A Nx Dj Ujrl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Workpiece & Performance Panel formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Main line capacities (excerpt): • Multiblade saw feed: 2–48 m/min • Bundle forming: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Portal Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return with light curtain safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Aligns panels for decorative-appropriate downstream processing 4. Multiblade Circular Saw K34/G/2200 Longitudinal cutting with edge trimming • Feed rate: 2–48 m/min • Max. cutting height: 58 mm • Main motor: 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cutting) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross Cut Station HPp11 Cross cutting in continuous run with hold-down beam • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Layer turning device (2×8 compartments) to separate multiple stacks • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer (TW) 90° redirection with belt conveyors, feed up to 130 m/min Transfer to profiling line Profile Processing (soundproof) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided edge processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Glue joint coloring + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • Identical configuration • Integrated edge sealing Ledpfx Aoywxraja Ujrl 11. Sonolit Soundproof Cabin Enclosure for both HOMAG profile machines • Approx. 12,000 × 7,000 × 3,000 mm Postprocessing 12. BARGSTEDT TTK44/21/14/02 Drying Turner Workpiece turning in continuous operation • Up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Bundling 14. BARGSTEDT TVP40/L/14/02 Bundle Forming Station Automatic bundle forming with first/second quality sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Bundle height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and provision of cartons before packaging • Capacity up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Applicator Automatic application of protective paper • Guaranteed up to 10 packs/min 17. Labeling Station Automatic package labeling (format range as per packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapping Line Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling line after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Bundle Cross Stacker Automatic stacking onto pallets • Bundles up to 1,400 × 195 × 58 mm • Max. capacity 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer pallet forming with vacuum lifters • Up to 6 cycles/min • Bundle weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Kondisi: sangat baik (bekas), Flexible batch size 1 production and single-sided edge banding line (right) Consisting of the following machines: M.01) FEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x Kw 3) DOUBLE gluing unit (PUR glue + premelter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (12 compartments) End trimming unit WK13 (CHAMFER / STRAIGHT, automatic adjustment) Pre-milling unit (2 x Kw 0.55) pneumatic adjustment Multifunction profile milling unit (CNC-controlled) MF 21 (2 x Kw 0.55) Profile copying milling unit FF 32 (4 x Kw 0.4) with automatic changeover device Contour trimming unit (for fine milling), CNC-controlled FK 31 (30 m/min) recently added after a technological retrofit Multi-profile scraping unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbeting and profiling UF 11 (1 x Kw 4) M.03) LOADING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S Lodpfoinigmjx Aa Uerl

Kondisi: bekas, nomor mesin/kendaraan: 008412, de20240614-01 Lrsdeyilxmspfx Aa Usl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 70004, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, Parameter teknis Dimensi - panjang: 9,8 m - lebar: 1,5 m - tinggi: 1,8 m Daya motor: 40 kW Perlengkapan - kecepatan pengumpanan: 6 - 30 m/menit Lrodpeyzc Igofx Aa Ujl - ketebalan panel: min. 8 mm, maks. 60 mm - lebar panel (dengan tepi): min. 65 mm (untuk ketebalan tepi 0,4 - 3 mm) - panjang panel: min. 150 mm - tinggi tepi: min. 14 mm, maks. 65 mm - ketebalan tepi: min. 0,4 mm, maks. 20 mm

Kondisi: sangat baik (bekas), Kontrol PC Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Konveyor bermotor tipe thru-feed No. 2 Dudukan bor horizontal (tampilan digital untuk data posisi sumbu) Lodpfx Aaeyv Ev Aj Uerl No. 1 Unit bor untuk setiap dudukan bor horizontal (1 x 1,5 kW) No. 21 Spindel untuk setiap unit bor horizontal Lebar kerja maks. (mm): 2500 Lebar kerja min. (mm): 250 No. 4 Dudukan bor vertikal bawah (tampilan digital untuk data posisi sumbu) No. 2 Unit bor untuk setiap dudukan bor vertikal bawah (2 x 1,5 kW) No. 4 Penjepit benda kerja vertikal atas Sabuk pembuang serbuk Daya total terpasang (kW): 35

Kondisi: bekas, Tahun pembuatan: 2002, Mesin edging softforming dua sisi HOMAG tipe Power KF 20/34/QE/30, No. mesin 0-202-25-8815, tahun pembuatan 2002. Lodoyyxc Repfx Aa Ujrl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: 0-261-20-6827, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 16 A, frekuensi input: 50 Hz, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 6 mm, jenis penyesuaian ketinggian: mekanis, kecepatan pemakanan sumbu X: 11 m/menit, tahun perombakan terakhir: 2025, Perlengkapan: Penandaan CE, dokumentasi / manual, Tipe KDF 220 Profiline Tahun pembuatan: 2012 Unit dikendalikan dari display Unit pemberi lem 2 x 2,2 kW Unit pengelem A6 Unit gergaji potong 2 x 0,18 kW Unit frais rata 2 x 0,27 kW Unit frais profil 2 x 0,35 kW WD 40 Pisau serut radius Pisau serut permukaan Ketebalan tepi 0,4-6 mm Ketebalan benda kerja 8-60 mm Kecepatan umpan 11 m/menit Lodpfeyy S Adjx Aa Usrl Daya total 16 kW Panjang 4150 mm

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Lini produksi industri HOMAG WEEKE ini diproduksi pada tahun 2007. Lini ini dilengkapi dengan sistem lengkap untuk pemrosesan panel volume tinggi dan edge-banding, termasuk sistem pemuatan otomatis, konveyor rol sentral, beberapa modul edge-banding, serta manipulator portal untuk penumpukan. Cocok untuk produksi kayu yang efisien, memastikan penanganan yang cepat dan presisi. Pertimbangkan kesempatan untuk membeli lini produksi industri HOMAG WEEKE ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Produksi Lengkap Lsdpsx D Dq Ssfx Aa Ujrl

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, daya: 19 kW (25,83 hp), jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.730 mm, jumlah spindel: 20, Jumlah stasiun alat di turret alat 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling Unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety enclosure Note: Cones, cutters, and attachments are not included in the scope of delivery. Safety fences will be supplied as available (left side only). The machine is sold and delivered 'as is, where is', based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906 Lodpfjyttf Sjx Aa Uorl

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.550 mm, tinggi benda kerja (maks.): 40 mm, jumlah spindel: 30, kecepatan perjalanan (maks.): 80.000 mm/menit, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Max. workpiece height: 40 mm Number of suction beam traverses: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of positions: 18 Tool magazine 2 Number of positions: 10 EQUIPMENT Lrjdpfxjyttcwe Aa Uel NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cone and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7350

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 Lrjdpfx Aoytr Hbea Ujl No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture components, allowing workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge bander capable of processing various edging materials up to 20 mm thick. If you are looking for high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edge banding machine, which we have for sale. Contact us for more details. • Line workpiece capacity: • Length: 250-3000 mm • Width: 120-1200 mm • Thickness: 8-60 mm • Edge banding machine (KAL 330) – Base and transport • Continuous machine frame; workpiece support with extendable roller rail ~800 mm • 80 mm wide transport chain with rubber coating; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18-25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depends on workpiece length) • Workpiece protrusion/overhang 30 mm • Workpiece thickness 12-60 mm • Edging material from strip: 0.4-20 mm (max. cross-section 900 mm²) • Edging material from coil: 0.3-3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter 830 mm • Pneumatic connection 7-8 bar • Infeed system and control (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic feeding (longitudinal and transverse); suitable for dimensionally accurate, square parts • Stepless adjustment of the infeed guide (axis), adjustable speed at entry terminal • Automatic aggregate lateral adjustment (workpiece overhang 30-80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edging preparation and gluing • Pre-milling unit: 2 motors, 4 kW each, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Premelting unit with granulate reservoir • Quick-change system for QA/QE application unit; QA front glue reservoir for color changes • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) Lredpfxeytf Iro Aa Usl • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • HL84 milling unit with stationary milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side milling fence adjustment when changing edge thickness • Rough trimming unit: 2 motors on top of each other, 1.5 kW each, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position adjustment: rough trimming with ~0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Servo contour trimming unit FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces 500 mm • Workpiece thickness 12-60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guidance with additional clamping for min. 120 mm workpiece length (one-sided) • Post-processing and cleaning • Multi-cleaning unit MN21 automatic:

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah sumbu: 3 Mesin HOMAG WEEKE OPTIMAT BHX 500 3-sumbu ini diproduksi pada tahun 2011. Mesin ini merupakan pusat pemrosesan CNC yang kokoh dengan area kerja 2500 mm x 1300 mm, daya spindle utama 6 KW, dan ketebalan panel maksimum 80 mm. Termasuk 84 spindle pengeboran dan spindle milling ganda, masing-masing dengan daya 6 KW pada 18000 rpm. Jika Anda mencari kemampuan CNC berkualitas tinggi, pertimbangkan mesin HOMAG WEEKE OPTIMAT BHX 500 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Lrsdpfx Aex D Nvgsa Uel Pemrosesan Kayu CNC

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), HOMAG PROFI BMG 511/60/12/R 4-axis ini diproduksi pada tahun 2015. Sebuah pusat pemrosesan CNC yang kokoh dengan changer alat 18 posisi, kepala bor dengan 30 spindle, dan alokasi area meja dinamis. Dilengkapi spindle milling utama dengan daya 12 kW dan rentang kecepatan hingga 24.000 rpm. Ideal untuk pekerjaan kayu kompleks dengan area kerja luas 6.000 x 1.550 mm. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Lredpfxsx D Ra Ho Aa Ujl Jenis Aplikasi Pemrosesan Kayu CNC

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, HOMAG KAL 310/7/A3 ini diproduksi pada tahun 2010. Mesin pelapis tepi satu sisi bekas dengan majalah tepi ISAS 28 posisi, unit perekat PU, dan sistem pengembalian Boomerang. Dilengkapi juga dengan unit milling join dengan dua motor serta sistem pelengketan PU 34 dengan kapasitas hingga 6 kg/jam. Ideal untuk aplikasi pelapisan tepi yang presisi. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Lsdpfxjx D Ra Tj Aa Usrl Jenis Aplikasi Pelapis Tepi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Mesin pelapis tepi diproduksi tahun 2009. HOMAG PROFI KAR310/11/A20/S2 ini dilengkapi dengan sistem pengembalian benda kerja BARBARIC. Pertimbangkan kesempatan untuk membeli mesin pelapis tepi HOMAG PROFI KAR310/11/A20/S2 ini. Hubungi kami untuk detail lebih lanjut. • Kondisi: Bekas Perlengkapan tambahan Lrodpfxoyhqi Dj Aa Usl • Sistem pengembalian benda kerja BARBARIC

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), kecepatan spindel (maks.): 8.000 rpm, en-001 Lrsdpfxsygvnpj Aa Uol

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 6.175 mm, jarak lintasan sumbu Y: 1.900 mm, jarak gerak sumbu Z: 300 mm, jumlah sumbu: 3, tinggi total: 300 mm, daya motor spindle: 15.000 W, kecepatan spindel (maks.): 24.000 rpm, en Ljdpfxsyap S Is Aa Uorl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, HOMAG KAL 330/6/A3/S2 ini diproduksi pada tahun 2009. Mesin edging bekas dengan unit pengeleman untuk lem peleleh EVA, zona penekanan, unit pemotong, router kopi, scraper, dan unit polishing. Dilengkapi dengan sistem pengembalian benda kerja LIGMATECH. Manfaatkan kesempatan untuk membeli mesin edging HOMAG KAL 330/6/A3/S2 ini. Hubungi kami untuk informasi lebih lanjut. Lrodpfxoychduj Aa Usl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 380 mm, jumlah sumbu: 5, HOMAG PROFI BOF 722/58/18/F/K 5-sumbu ini diproduksi pada tahun 2005 dan memiliki area kerja X = 6000 mm, Y = 1800 mm, dan Z = 380 mm. Mesin ini dilengkapi kepala garpu 5-sumbu yang diperbarui pada 2019 dan dua penukar palet bergerak masing-masing dengan 18 slot. Ideal untuk pemrosesan kayu tingkat lanjut, pertimbangkan untuk membeli pusat pemesinan CNC HOMAG PROFI BOF 722/58/18/F/K ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Lsdpfx Aox D Hxfja Uorl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jumlah sumbu: 4, kecepatan spindel (maks.): 18.000 rpm, en-GB Lsdpex D Ribsfx Aa Uerl