Beli Jet Mesin Amplas Sabuk Lebar bekas (80.283)

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt size: 420x1800 mm (please consult us for supply) MACHINE COMPONENTS: - Roller table, bottom-side belt operation Table height from floor: 90 cm - Automatic workpiece detection via sensor Lrsdsx A Unxjpfx Aa Uel - Pneumatic pressure sanding pad - Automatic belt directional change MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz, IN 22 A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and lifting of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports, Ø150 mm each Recommended flow rate: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front/rear, padlockable main switch Note: For optimal operation, always release belt tension when the machine is not in use, and avoid any moisture including dew point condensation inside your facility during winter. Footprint: 1500x1300x2050 h.mm Weight: 1200 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Working width 1300 mm Workpiece height – max. 3 – 140 mm Control system Xinje XD5 Part length – min./max. 200 – mm Total connected load 13.4 kW Machine weight approx. 4.5 t Space requirements approx. 5.1 x 2 x 2.3 m This brush sanding machine is in very good condition, immediately available, and can be inspected under power at the seller’s location. DESCRIPTION: Lredsylp A Dspfx Aa Uol - Minimum part length: 200 mm - The machine is designed for sanding flat individual components such as kitchen cabinets, windows, doors, furniture, etc. - Modular control system for the module units to meet customer requirements. - Frequency converter for speed control of the motors on each module unit. - Each unit can be easily pulled out for maintenance and for changing sanding paper and brushes. - Automatically adjustable working height (3–140 mm) via the control system - Oscillating compressed air at the end section Additional information: - Ball bearings, drive belts, and chains for the brush drives were replaced in June 2025

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Mesin amplas belt orientable Nebes L125 - Baru, CE Buatan Italia Belt: 1500 x 120 mm Ledey Takcopfx Aa Uerl Spesifikasi teknis mesin amplas belt NEBES L125 Ukuran belt: 1500 x 120 mm Putaran tanpa beban: 1400 rpm Kecepatan belt: 15 m/s Ukuran meja: 410 x 185 mm Diameter dan jumlah gigi cutter: Ø 180 mm - Z 120 Kebisingan: 70 dB Jumlah outlet untuk ekstraksi debu: 1 Catu daya: 400 V 50 Hz Daya motor: 750 W Ukuran kemasan: 450 x 830 x 1050 h mm Berat bersih: 65 kg

Kondisi: bekas, Tahun pembuatan: 1999, Mesin bekas Tahun pembuatan: 1999 Perlengkapan dan data teknis: Dapat digunakan sebagai mesin penghalus permukaan dan tepi Ukuran meja: sekitar 2500 mm Berat: sekitar 490 kg Ketersediaan: segera Lokasi gudang: 63934 Röllbach Lodpfxsy Siz Ue Aa Usrl

Kondisi: bekas, Tahun pembuatan: 1992, Used machine Year of manufacture: 1992 Equipment and Technical Data: - Suitable for craft workshops, equipped with 1 combination unit for top-side sanding - Working width: 950 mm - Sanding belt dimensions: 970 mm wide, 1700 mm long - 1 combined contact roller and sanding pad unit, drive motor 7.5 kW, with 85° Shore contact roller and sanding pad with felt cover and sliding coating - DFL veneer sanding unit - Workpiece-controlled air cushion sanding pad - Protected sanding pad holder inside the machine - Sanding belt drive with automatic star-delta start and maintenance-free, wear-free electric brake system - Additional storage for another sanding finger - Safety shut-off when door is opened - Pneumatic sanding belt tensioning device - Conveyor belt feed driven by worm gear motor, feed speeds 4 and 8 m/min, with automatic belt tracking control - LED digital display for workpiece thickness adjustment - Safety cut-off at machine infeed in case of workpiece overthickness - Indicator lights for operational readiness - Optimally positioned dust extraction hood with nozzle (D=160 mm) for the sanding belt - Infeed roller table - Complete pneumatic control system, including automatic pressure monitor, control and monitoring devices - All electrical switching components – main switch, fuses, contactor control with motor protection relay, display devices – in accordance with VDE standards Lrodpoy R E U Uefx Aa Usl - Total connected load: approx. 9 kW - Operating voltage: 380 V, 50 Hz - Dimensions: approx. 1500x1650x2000 mm - Weight: approx. 1200 kg Availability: by arrangement Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 1976, Mesin bekas Tahun pembuatan: 1976 Perlengkapan dan data teknis: Lodpfx Aaewpm I Tj Uerl - pengamplasan dari bawah - pengaliran material melalui rol karet - kontrol osilasi tanpa kontak - balok tekanan yang dapat diganti dengan cepat - pengaturan ketebalan alat secara elektromotorik dengan tampilan digital yang mudah dibaca - tombol tekan dengan kontrol kontaktor - lebar pengamplasan 1350 mm - ketebalan benda kerja maks. 150 mm - lebar belt amplas 1360 mm - panjang belt amplas 1900 mm - pengumpanan roller dapat diubah 10 + 20 m/menit - sambungan udara tekan 6 bar - kebutuhan udara sekitar 180 NL/menit Daya motor 17,5 kW Ukuran (P x L x T) 1800 x 1100 x 1520 mm Berat 2600 kg Ketersediaan: segera Lokasi gudang: 63934 Röllbach

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Wide Belt Sander SAC 1000 CLS/S – Ready for Operation Specification: • Condition – used, after comprehensive inspection • Manufacturer – SAC • Model – CLS/S • Working width – 1000 mm • Max. working height – 160 mm • 1 sanding unit – hard rubber roller • Main motor power – 11 kW • 2 feed conveyor speeds • Table with pneumatic cylinders – ideal for calibration • Electronic thickness gauge for workpieces • Oscillation on pneumatic anvil Lrodpoy R Evrsfx Aa Uol • Abrasive belt size – 1030x1900 mm • Weight approx. 1300 kg • Overall dimensions 150 x 222 x 187 cm (L x W x H) Additional information: • Machine is in perfect technical condition, ready for immediate use • Presented photos show the actual condition of the item for sale • Possibility to power on and test the machine on-site • Free operator training provided at company premises • The auction price does not include VAT or transport costs Financing and transport: • We organize transport via MDD fleet, courier companies, or external hauliers • We offer financial support in the form of leasing or lease loan

Kondisi: bekas, Color: Grey Wide Belt Sander SCM Sandya 10S M2 110 Year of manufacture: 1999 Sanding belt dimensions: 2620 x 1115 mm 380V 1st Sanding Unit Contact roller: 180 mm Motor: 18.5 kW 2nd Sanding Unit Combination unit with sanding pad Motor: 11 kW Maximum sanding width: 1100 mm Minimum/maximum sanding height: 4 / 170 mm Feed speed: 4.5 – 9 m/min Dimensions: 2300 x 2205 x 2500 mm Weight: 1850 kg - Documentation available: No - CE certificate available: No - Number of units: 2 - Unit 1: - Roller diameter: 180 mm - Motor power: 18.5 kW - Unit 2: - Sanding belt length: 2620 mm - Sanding belt width: 1115 mm Lrodpfxewnh A Ae Aa Uel - Motor power: 11 kW - Max. working width: 1100 mm - Min. working height: 4 mm - Max. working height: 170 mm - Min. feed speed: 4.5 m/min - Max. feed speed: 9 m/min Financial information: VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for any item from the industrial sector. Yorick Diebels

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Wide Belt Sander CB ST 970 R+R – after comprehensive overhaul Specification: • Condition: used, after thorough inspection, calibration, and replacement of conveyor belt with a new one • Manufacturer: CB • Model: ST 970 R+R • Working width: 970 mm • 2 sanding units: - 1 calibration roller, hard rubber, Ø160 mm - 2 finishing sanding roller, soft rubber, Ø160 mm • Main motor power: 9.2 kW Ledpfxsy Rh E As Aa Usrl • 2 feed speeds • Electronic thickness gauge for the processed element • Oscillation controlled by photoelectric sensor • Abrasive belt size: 970 x 2270 mm • New conveyor • Emergency stop switch (E-stop) • Complete manufacturer’s documentation (in Italian) • Weight: 1,170 kg • Year of manufacture: 2004 • Overall dimensions: 130 x 160 x 195 cm (L x W x H) Additional Information: • Machine is in very good technical condition, ready for immediate operation • Actual item condition shown in the photos • Possibility to power up and test the machine on site • Free operator training available at our company premises • Auction price excludes VAT and transport costs Financing and Transport: • We organize transport via MDD fleet, courier companies, or external carriers • Financial support possible in the form of equipment leasing or lease-purchase loan

Kondisi: bekas, Tahun pembuatan: 2001, Sanding belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding shoe 1st unit: electronic segmented shoe Sanding belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW Ljdpfx Aexzi S Nsa Uorl 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Sanding belt length 2nd unit: 2,150 mm Sanding belt width 2nd unit: 1,350 mm Sanding belt speed 2nd unit: 18 m/sec 3rd unit: pad aggregate Design 3rd roller: electronic pressure bar SDS Sy Sanding shoe 3rd unit: electronic segmented shoe, 32 mm width Sanding belt length 3rd unit: 2,150 mm Sanding belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt blow-off: yes Vacuum conveyor belt: yes Feed speed fixed: infinitely variable 5 - 15 m/min Control: screen control Elec./pneu. belt oscillation: electric Infeed height: variable (lower table adjustable) Table lift: electro-motorized Table display: digital Working height or feed table height: 880 mm Location: Nattheim

Kondisi: bekas, Mesin amplas sabuk BÜRKLE BSU 2500/800 - bekas - Penutup sabuk amplas, Kipas ekstraksi ----- Data teknis ----- Ukuran meja: 2.500 x 800 mm, Motor: 5,5 kW, Ukuran sabuk amplas (PxL): 7.200 mm Ljdpfoxlt Ebox Aa Ujrl

Kondisi: baik (bekas), Tahun pembuatan: 2002, de-001 Lodjpitqmspfx Aa Uorl

Kondisi: sangat baik (bekas), NOMOR KATALOG: 7773 SPESIFIKASI TEKNIS Lredpfx Aajykaxmj Uol - Lebar maksimum elemen yang dikerjakan: 900 mm - Tinggi maksimum elemen yang dikerjakan: 160 mm – Dari atas: - Rol logam, peluncur Unit I – rol karet bergalur untuk kalibrasi Unit II – 2x rol logam untuk kalibrasi + sepatu – Dari bawah: - Sabuk penarik - Oscilasi sabuk pneumatik - Pengangkatan meja elektrik - Motor utama: 15 kW / 11 kW - Motor pengumpan: 1,5 kW - Tekanan kerja: 6–8 bar - Diameter konektor ekstraksi: 2x200 mm - Dimensi P/L/T: 1850x1950x2040 mm - Berat sekitar 3000 kg KEUNGGULAN – Produksi Italia – Mesin pengamplas kalibrasi + sepatu – Mesin pengamplas bekas, kondisi sangat baik Harga netto: 13.900 PLN Harga netto: 3.300 EUR (kurs 4,2 EUR) (Harga dapat berubah sesuai dengan fluktuasi nilai tukar yang signifikan)

Kondisi: sangat baik (bekas), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width of the workpiece: 1100 mm - Maximum working height of the workpiece: 170 mm 2 units: 1) Grooved steel calibration roller 2) Grooved rubber roller + pad + steel roller – Top section: - Rubber feed roller, idle - Working unit (two units on one motor) 15 kW - Rubber feed roller, idle - Rubber outfeed roller - Belt cleaning air jet – Bottom section: Ledpfxsy Ddp Dj Aa Uerl - 2 steel idle rollers - Feed belt - 2 rubber idle rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric table height adjustment + manual fine adjustment - Pneumatic brake - 2 feed speeds - Working pressure: 6–8 bar - Extraction port diameter: 2x140 mm - Overall dimensions (LxWxH): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Unpainted – Used sander in excellent condition Net price: 77,900 PLN Net price: 18,550 EUR (at an exchange rate of 4.2 PLN/EUR) (Prices may vary according to exchange rate fluctuations)

Kondisi: bekas, Tahun pembuatan: 1983, Mesin bekas Tahun pembuatan: 1983 Perlengkapan dan data teknis: dengan 2 unit kombinasi, masing-masing dengan 2 rol kontak (1 x 65° shore, 1 x 85° shore) dan 2 sepatu pengamplasan udara Lebar pengamplasan: 1350 mm Ukuran sabuk amplas: 1360 x 1900 mm Ketebalan benda kerja maks.: 150 mm Unit 1: 15 kW Unit 2: 15 kW Sikat pembersih Meja rol di sisi masuk Meja rol di sisi keluar Lrodpfxsy Dkhgj Aa Uel Kecepatan maju variabel: 2,5 hingga 12,5 m/menit Berat: sekitar 3700 kg Ketersediaan: sekitar Mei/Juni Lokasi: Thüringen

Kondisi: bekas, Tahun pembuatan: 2008, nomor mesin/kendaraan: 0-411-49-1873, Technical specifications: - Manufacturer: Bütfering - Model: Optimat SGO 211/RC - Number of sanding units: 2 pcs - Year of manufacture: 2008 - Working width: 1,100 mm - Sanding belt width: 1,120 mm - Sanding belt length: 1,900 mm - Workpiece thickness: 3–160 mm - Feed speed: 2.5–13 m/min - Weight: 1,800 kg - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via frequency inverter Ledpfx Ajyh Hwusa Usrl - Up to 125 sanding programs storable - Wear-free braking system 1st sanding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd sanding unit (C) - Combination unit with roller and sanding pad - Rubber-coated contact roller 65 Shore - Contact roller diameter 160 mm - Electronic segmented pressure beam, segment width 35 mm - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz - Compressed air consumption at 6 bar: 20 L/min - Belt cleaning device: per blast 440 L/min - Extraction volume: approx. 2,880 m³/h at 20 m/s - Extraction ports: 1 x Ø 160 mm (sanding unit, roller) 1 x Ø 160 mm (sanding unit, pad) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Dijual: Mesin pengamplasan silinder JET 2244 dengan motor 1,8 HP dan lebar pengamplasan maksimal 560 mm. Mesin dalam kondisi sangat baik, telah dicek dan diservis oleh tim layanan kami. Spesifikasi teknis: - Lebar pengamplasan: 560 mm (1120 mm) - Ketebalan pengamplasan: 0,8 – 102 mm - Kecepatan maju variabel: 0 – 3 m/menit Ljdpfxsyzqtqs Aa Uorl - Dengan osilasi - Kecepatan drum: 1450 rpm - Dilengkapi saluran ekstraksi Ø 100 mm - Daya motor: 1,8 HP / 230 V - Tahun pembuatan: 2023 / seperti baru Mesin berada di A-5431 Kuchl dan dapat dilihat kapan saja selama jam kerja kami. Penjualan sebelumnya dapat terjadi sewaktu-waktu! Istilah terkait: JET 2244, mesin pengamplasan, silinder, osilasi, pengamplas Referensi: R-L0B6O

Kondisi: baru, Tahun pembuatan: 2026, Belt and Disc Sander CORMAK MSM250 with Stand – Professional Machine for Various Applications The CORMAK MSM250 multifunctional belt and disc sander is a modern, high-performance combination sander designed for industrial, workshop, and carpentry applications. With its dual sanding modes—belt and disc—the machine provides maximum flexibility and efficiency when processing metal, wood, and plastics. Equipped with top-quality NSK bearings, this sander operates exceptionally quietly, smoothly, and reliably over long periods. This sets it apart from the competition and ensures professional-grade performance. The belt sander with stand features a balanced rotor supported by ball bearings, as well as a robust motor with copper windings, delivering high torque essential for intensive grinding tasks. An integrated 38 mm extraction port makes it easy to connect a dust extraction system, significantly improving workplace comfort and safety. Additionally, the disc sander with base CORMAK MSM250 is fitted with an adjustable work rest and IP54 protection—ensuring precise operation and operator safety. If you are looking for a reliable benchtop sander with universal applications, the MSM250 model will meet the expectations of even the most demanding users. Key Features: - Combination belt and disc sander – maximum functionality - Industrial NSK bearings – quiet operation and extended durability - Suitable for sanding metal, wood, plastics – versatile applications - Motor with copper winding – dependable and efficient - 38 mm extraction port – clean and safe working environment - Stable stand – user comfort and ergonomic design Lrjdsxfgw Ropfx Aa Uol Technical Specifications: Grinding disc size: 250 x 32 mm Disc bore: 32 mm Disc grit: K 40 Belt size: 1020 x 75 mm Belt grit: P 80 No-load speed: 2960 rpm Motor power S1: 0.9 kW Motor power S6: 1.5 kW Voltage: 400 V Dimensions: 570 x 310 x 1410 mm Weight: 32.5 kg S1 – motor power at continuous operation under full load S6 – motor power at intermittent operation with 40% idle time

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Profile Belt Sander, PS0 Groove Profile by Zimmermann with Extensive Accessories Sanding machine with tilting table and additional rasping equipment. Ideally suited for model making and mould construction. Perfect for precise contour sanding. All adjustments made with clamping lever and fine adjustment. Drive motor 400V, 1.1kW Table tiltable up to 45° forward and 20° backward Machine table approx. 400 x 400 mm Foldable upper extraction arm for sanding large workpieces. By locking the free-standing profile rail in the upper part of the machine, high angular accuracy can be achieved. Includes three profile reversal rails: 15, 30, and 40 mm (straight and radius) Several sanding belts included; see photos Three unused rasps Extraction connection 80 mm Waldmann surface-mounted work light Original paint, partially retouched Ledpfx Aaew Iqvqo Ujrl CE mark Very well-maintained machine from prototype manufacturing in the motorsports division of a Wolfsburg car manufacturer. Clearly has seen very little use so far. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse – see "more offers from this supplier".

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, EN-001 Lrjdpfx Aajyy Nc Us Ujl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, I am selling a wide belt sander SCM Sandya 16 S 110, year of manufacture 2012. Configuration: - 18.5 kW hard rubber sanding drum - 15 kW hard rubber sanding drum - 11 kW combination unit: soft rubber drum + pneumatic pad - Working width: 1100 mm - Pressure rollers for short workpieces - Compressed air cleaning for all units - Total weight: 2750 kg - 3 motors: 18.5 + 15 + 11 kW Lsdpfxeihfaws Aa Ujrl Includes complete documentation. Condition: LIKE NEW! The machine has had very little use. Available immediately.

Kondisi: baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2020.12.171, lebar total: 3.590 mm, tinggi total: 2.910 mm, panjang total: 2.210 mm, lebar penggilingan: 2.600 mm, kecepatan sabuk penggerinda: 2.400 mm/dtk, panjang sabuk penggiling: 3.250 mm, tinggi benda kerja (maks.): 80 mm, lebar sabuk penghalus: 2.650 mm, kebutuhan udara: 192 m³/jam, Heesemann sanding machine KSA 8, 2600 mm working width, belt sanding machine The sanding machine consists of: 1. Machine frame For mounting the conveyor bed, with connection points for 1 sanding unit and 1 brushing unit. 2. Conveyor bed Individual conveyor belts, feed speed adjustable from 5 – 25 m/min, frequency-controlled. Constant working height at 920 mm. Adjustment for workpiece thickness (3–80 mm) by height adjustment of the entire upper machine section. Monitoring of the toothed belts for the lift gearbox at an adjustment speed of 3 mm/s. Includes integrated control cabinets. 3. Industrial PC 21.5" Capacitive multi-touch color display, 1920 x 1020 resolution, CF card slot, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program storage for 1,000 programs; motor speed values are saved and automatically set according to selected program. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration work (steel) Balancing quality Q 1 (fine balanced) acc. to VDI 2060, driven via Poly-V belt, maintenance-free bearing. Diameter: 350 mm Sanding belt size: 3,250 x 2,650 mm Belt speeds: 1–24 m/s Drive power: 37 kW frequency inverter Ljdpfxsywuqrj Aa Ujrl Stepless adjustment of sanding belt speed, wear-free brake device, intermittent belt cleaning, automatic infrared belt tracking, counter-rotating belt operation, manual grit compensation Infeed: segmented, pneumatically controlled pressure lip Outfeed: continuous, pneumatically controlled pressure lip 6. Brush roller unit, centrally height-adjustable, incl. extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, including integrated fan. Operating voltage: 400V, 50 Hz Machine painting: Interior paint: light gray RAL 7035 Exterior paint: light gray RAL 7035 Doors: anthracite RAL 7016 Brush insert side: left Terminal: front left 8. Ionizing bar from above For elimination of static charges, including high voltage transformer 9. Workpiece blowing unit with rotating compressed air nozzles at the machine outfeed, including extraction hood General specifications of the sanding machine: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 – 80 mm Dust extraction: Required airflow speed, minimum 20 m/s (significantly higher extraction speeds may cause functional disadvantages) Underpressure in machine approx. 1000 Pa Air flow requirements for: - 1 longitudinal sanding unit, roller diameter 350 (connection 1 x Ø 330 mm) 103.0 m³/min - 1 brush unit, diameter 250 (connection 1 x Ø 206 mm) 38.0 m³/min - Workpiece blowing (connections 2 x Ø 120 mm) 28.0 m³/min - Conveyor belt blowing (connection 1 x Ø 160 mm) 24.5 m³/min - Fan exhaust for workpiece vacuum clamping system (connection 1 x Ø 180 mm) 30.5 m³/min Total air requirement: 224.0 m³/min

Kondisi: bekas, Tahun pembuatan: 1998, Used machine Year of manufacture: 1998 1 belt sanding machine with combination unit with electronic segmented pressure bar for sanding soft and hard veneers calibration and fine sanding of solid wood calibration of workpiece carrier boards sanding of defective veneers and lacquers intermediate sanding of PU, hydro, UV, nitro, and polyester lacquers sanding of blocking foils with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm calibration roller can be activated via terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed frequency controlled, approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blow-off: 490 l/min Extraction port: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm The machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach Lrsdpfx Aaox Rpghj Usl

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear brake unit, automatic belt length adjustment Ledpfx Aajx Rdn To Uorl Dust extraction system controlled according to workpiece presence, counter-rotating sanding belt, abrasive belt grain compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Incl. continuously adjustable sanding speed via electronic frequency inverter, double purge opening connection for dust extraction device. Anti-wear brake unit, automatic adjustment of differing belt edge lengths, dust extraction system controlled according to workpiece presence, disconnectable, counter-rotating sanding belt. 2 pressure beams with selectively adjustable pressure system - CSD® system Continuously adjustable pressure of individual pressure elements for single and multiple feed. Spacing: 32 mm. Workpiece tolerance compensation up to 2 mm by maintenance-free pressure magnets. Working width, as well as the start and end of sanding on the pressure beam, are electronically adjustable. The pressure elements are activated by electromagnetic lifters capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology always ensures proportionally equal pressure in relation to pad overlapping on the workpiece. The risk of edge-through sanding is virtually eliminated by this continuous, dynamic control of pressure force.

Kondisi: baru, Bernardo belt grinding machine MS 75 x 2000 S-2 Technical Specifications Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x W: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction connection Ø: 100 mm Motor output (S1 100%): 1.5 / 2.2 kW Motor input (S6 40%): 2.2 / 3.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 67 kg Scope of delivery Lrsdpfxed Du S Uj Aa Uel • Sanding belt K 80 • Foldable protective screen • Grinding and support table • Workpiece stop • Dust extraction nozzle • Motor protection switch • Rubber-coated contact roller • Graphite pad • Separate stop button • Base frame