Beli Kraussmaffei 4000-24500 Mc bekas (4.717)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 54.980 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.500 kN, diameter sekrup: 90 mm, jarak antara tiang: 1.350 mm, volume langkah: 2.290 cm³, tekanan injeksi: 1.839 batang, tinggi cetakan (min.): 978 mm, langkah pembukaan: 1.020 mm, lebar pelat: 1.710 mm, tinggi pelat: 1.650 mm, berat keseluruhan: 35.000 kg, jumlah injeksi: 1, Perlengkapan: dokumentasi / manual, DE Tjdpszcam Usfx Ad Rja

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Tersedia mesin cetak injeksi format besar Krauss Maffei. Gaya penjepit: 6500 kN, jarak antar kolom X/Y: 1000 mm/930 mm, dimensi pelat penjepit X/Y: 1530 mm/1450 mm, jarak buka maksimum: 900 mm, rentang tinggi cetakan: 350 mm–650 mm, jarak maksimum antar pelat: 1550 mm, langkah ejektor: 250 mm, gaya ejektor: 110 kN. Dimensi mesin X/Y/Z: sekitar 10000 mm/2800 mm/2450 mm, berat: sekitar 46000 kg. Termasuk satuan penanganan Wittmann. Dokumentasi tersedia. Kunjungan di lokasi memungkinkan. Tjdpfx Aszc Rd Dod Roa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, gaya penjepit: 8.000 kN, diameter sekrup: 85 mm, berat injeksi: 2.452 g, en Tjdjyyxc Dopfx Ad Rja

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Gaya penutup: 3000kN, volume injeksi: 1047cm³, berat injeksi: 953g, tekanan injeksi: 1778bar, diameter ulir: 70mm, jarak antar kolom: 630mm, langkah pembukaan: 1150mm, langkah ejektor: 200mm, tinggi pemasangan: 330mm, lebar pelat: 1050mm, tinggi pelat: 995mm. Dimensi mesin X/Y/Z: sekitar 6250mm/2050mm/2400mm, berat: sekitar 12500kg. Dokumentasi tersedia. Pemeriksaan di lokasi memungkinkan. Tjdpszcyqtofx Ad Rja

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 42.519 h, gaya penjepit: 5.000 kN, diameter sekrup: 100 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin injeksi hidrolik dari tahun 2011. Krauss Maffei 500-4300 CX ini memiliki gaya penutupan 500 t dan diameter sekrup Ø 100 mm. Bukaan maksimum cetakan adalah 1530 mm dengan jarak antar tie bar 900 × 800 mm. Jika Anda sedang mencari mesin injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 500-4300 CX yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Kapasitas injeksi PP: 1,5 kg • Dimensi minimum cetakan: 480 mm • Jarak antar tie bar (H × V): 900 × 800 mm Tjdsy Tai Ejpfx Ad Rea • Bukaan maksimum cetakan: 1530 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 44.858 h, gaya penjepit: 4.200 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin injection molding hidrolik, tahun pembuatan 2011. Krauss Maffei 420-4300 CX ini memiliki gaya penutupan 420 t dan diameter sekrup Ø 90 mm. Mesin ini menawarkan bukaan cetakan maksimum 1400 mm dan jarak antara kolom 800 × 800 mm. Jika Anda mencari kapasitas injection molding berkualitas tinggi, pertimbangkan Krauss Maffei 420-4300 CX yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut mengenai mesin ini. • Kapasitas injeksi (PP): 1,2 kg Tjdpfoy S Tw Hex Ad Roa • Dimensi minimum mould: 380 mm • Jarak antar piston: 800 x 800 mm • Bukaan maksimum mould: 1400 mm • Jam operasi: 44.858 jam • Robot, conveyor dan hopper material tidak termasuk dalam penawaran.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 46.424 h, gaya penjepit: 3.500 kN, diameter sekrup: 80 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik tahun 2012. Krauss Maffei 350-3000 CX ini memiliki gaya penutupan 350 t dan diameter ulir Ø 80 mm. Mesin ini menawarkan kapasitas injeksi PP sebesar 640 g dan bukaan maksimum cetakan 1260 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 350-3000 CX yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Todpfsy S Tvvex Ad Rsa • Kapasitas injeksi PP: 640 g • Dimensi minimum cetakan: 380 mm • Jarak antar tie-bar: 710 × 710 mm • Maksimum bukaan cetakan: 1260 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 49.627 h, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik dari tahun 2012. Krauss Maffei 300-2000 CX ini memiliki gaya penahan sebesar 300 t dan diameter sekrup Ø 70 mm. Bukaan maksimum cetakan adalah 1000 mm dan jarak antar kolom adalah 630 × 630 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 300-2000 CX yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. Tsdpfx Adey S Tq Ho Rea • Volume injeksi PP: 640 g • Ukuran minimum cetakan: 320 mm • Jarak antar kolom: 630 × 630 mm • Bukaan maksimum cetakan: 1000 mm • Jam operasi: 49.627 jam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 49.533 h, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik tahun 2011. Krauss Maffei 300-2000 CX ini memiliki gaya penutupan sebesar 300 t dan diameter sekrup Ø 70 mm. Mesin ini memiliki bukaan maksimum cetakan sebesar 1000 mm dan jarak antar tie-bar 630 × 630 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 300-2000 CX yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Kapasitas injeksi PP: 640 g • Dimensi minimum cetakan: 320 mm • Jarak antar tie-bar: 630 x 630 mm • Maksimum bukaan cetakan: 1000 mm Tjdpfx Adjy S Tqas Rea • Jam operasional: 49.533 jam

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 65.000 h, gaya penjepit: 2.000 kN, diameter sekrup: 55 mm, Hidravlični izvlek jedra 2x Vroč tekač 4x Tsdpfx Astqifnjd Rea Zračni ventili

Kondisi: baik (bekas), Tahun pembuatan: 2010, Konveyor lurus untuk otomasi (misalnya "shift hantu" penyangga sementara) Terdiri dari dua konveyor: pada satu konveyor terdapat karton kosong, sedangkan konveyor kedua berisi karton yang sudah terisi. Kedua konveyor dilengkapi dengan sistem antarmuka EUROMAP67. Dengan demikian, konveyor dapat diprogram bersama mesin dan robot pengambil. Todpfxoy Spixe Ad Roa Produsen: KRAUSS MAFFEI Tahun pembuatan: 2010 Panjang konveyor: masing-masing 6,00 m Lebar total konveyor: 1,75 m

Kondisi: baik (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 4.230 mm, jarak lintasan sumbu Y: 1.950 mm, jarak gerak sumbu Z: 750 mm, panjang meja: 4.000 mm, lebar meja: 1.250 mm, beban meja: 11.000 kg, CNC gantry milling machine KAO MING - KMC 4000 SV-H Double guideway and flat guide design Head changer for multi-sided machining of large components Todpfx Adoxf E Twe Rsa Automatic tool changer for horizontal and vertical milling heads, swiveling Distance table to spindle nose: 213–1093 mm Distance table to spindle center: 130–… mm Horizontal head indexing: 5 degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torque: 1018 Nm, ISO 50 Universal milling head type Huron X-axis travel: 4230 mm Y-axis travel: 1950 mm Z-axis travel: 750 mm Distance between columns: 1500 mm Table length: 4000 mm Table width: 1250 mm Table load capacity: 11,000 kg Feed X-axis: 12,000 mm/min Feed Y-axis: 15,000 mm/min Feed Z-axis: 12,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 26 kW Spindle speed: 4,400 rpm Tool changer: 30 positions Chip conveyor: Yes Coolant system: Yes Length: 10,100 mm Width: 4,500 mm Height: 4,250 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, these do not constitute representations or contractual terms. We recommend that you verify all key details.

Tahun pembuatan: 2014, jam operasional: 1.000 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, de-001 Tjdoyrh Ifspfx Ad Roa

Tahun pembuatan: 1975, Kondisi: baik (bekas), 11 straightening rollers, Ø 130 mm Strip width: max. 1,900 mm Strip thickness: max. 10 mm Tododnztkepfx Ad Rja

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 120 mm, lintasan ejektor: 300 mm, langkah pembukaan: 1.900 mm, DETAIL TEKNIS Gaya penutup: 9.500 kN Tedpfey T H A Eex Ad Rja Gaya buka: 665 kN Jarak antar pilar: 1.400 x 1.150 mm Pelat penjepit: 1.960 x 1.710 mm Stroke pembukaan: 1.900 mm Tinggi cetakan minimum: 500 mm Tinggi cetakan maksimum: 1.200 mm Lebar pembukaan maksimum: 2.400 mm Stroke ejector: 300 mm Sekrup berkapasitas tinggi HPS-UN, diameter: 120 mm Radius nosel: 30 mm Bukaan nosel: 12 mm Diameter sekrup: 120 mm Berat tembakan (HDPE): 5.420 g Volume tembakan: 7.634 cm³ Tekanan injeksi spesifik: 2.257 bar DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 12.770 x 3.420 x 2.750 mm Berat mesin: 61,5 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 424227, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, tekanan injeksi: 1.829 batang, berat injeksi: 1.304 g, langkah pembukaan: 1.400 mm, de-to-hu-it-lt Tsdpfx Ajy T Hwiod Rsa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 135 mm, jarak antara tiang: 1.140 mm, lintasan ejektor: 300 mm, TECHNICAL DETAILS Clamping force: 8,500 kN Mold opening force: 560 kN Platen dimensions (h x v): 1,600 mm x 1,600 mm Tie bar spacing (h x v): 1,140 mm x 1,140 mm Maximum daylight opening: 1,600 mm Mold height (min-max): 500 mm – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Shot weight for PS: 6,098 g Injection rate: 1,414 cm³/s MACHINE DETAILS Electro-hydraulic equipment Pump motor rated power: 132 kW Dry cycle time according to Euromap 6: 965 1/h Hydraulic tank capacity: 2,440 l Open nozzle with nozzle radius: 25 mm Nozzle opening: 9 mm Dimensions & Weight Installation space (L x W x H): 11.72 m x 2.92 m x 2.71 m Net weight with control unit: 49 t EQUIPMENT Krauss Maffei robot LRX 500 MC 5 control system with color monitor Integrated control panel and USB data storage Complete plasticizing unit for thermoplastics Todpfx Adoy T Hmko Rsa Non-return valve

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 11.000 kN, diameter sekrup: 120 mm, tekanan injeksi: 1.758 batang, berat injeksi: 6.175 g, langkah pembukaan: 2.000 mm, KraussMaffei KM 1100–12000 MX incl. WITTMANN Robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Tedpfoy T Hd Nox Ad Rsa Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Mold height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s MACHINE DETAILS Electrohydraulic configuration Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating zones at cylinder: 7 Dry cycles (Euromap): 802 1/h Oil tank capacity: 2,440 l Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight incl. control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel, and three USB ports

Kondisi: sangat baik (bekas), Tacchi HD/1450 – CNC Lathe 725 x 4000mm (2012) Nomor Seri: 7264 Tahun: 2012 Kontrol: Fanuc OiTD CNC Kondisi: Bekas – berfungsi dengan baik Spesifikasi Teknis: Tinggi pusat: 725 mm Putaran di atas alas: 1450 mm Putaran di atas slide silang: 1000 mm Todpfoxc In Sex Ad Rsa Jarak antara pusat: 4000 mm Motor penggerak utama: 60 kW Bobot maksimum antara pusat (tanpa penyangga): 15.000 kg Rentang kecepatan spindle: 1,9 – 560 rpm Fitur & Perlengkapan: 2 x steady rest 3-titik Roda tangan (handwheel) Konveyor serpihan Toolpost hidrolik 4-posisi Chuck 4-jaw Kontrol Fanuc OiTD CNC

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine Clamping force (kN): 6500 Distance between tie bars (h x v) (mm): 1110 x 960 Mold opening stroke (mm): 1450 Min. mold height (mm): 450 Max. mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (HPS-M mixing) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Control version: MC5 Screen language: German Condition: Tested, fully operational Features: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits Tedpfx Adey Apdqj Roa - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend graphics - PV regulation - Production data interface consisting of 5 potential-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei LRX 350 Linear Robot: - Fully integrated control system - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 61.300 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, jarak antara tiang: 470 mm, tekanan: 2.429 batang, Here, as a specialized dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. ++++From pharmaceutical cleanroom production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International designation: 380 EX / 120 Machine number: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical Data - Clamping Unit Clamping force: 1,200 kN Tie bar distance h x v: 470 x 470 mm Platen size h x v: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. daylight: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Moveable platen centering diameter: 160 mm Fixed platen centering diameter: 125 mm Mould weight: 1,485 kg Technical Data - Injection Unit Screw diameter: 35 mm Shot volume: 156 cc Injection pressure: 2,429 bar Screw L/D ratio: 23 l/d Screw speed: 289 rpm Plasticizing rate: 27 g/s (PS) Free-shot rate: 477 g/s (PS) Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6m x 1.7m x 2.19m Total weight: 9,700 kg Equipment Screen texts: German Screen texts: English +++Extras++++ Automation: Handling device / extraction robot included - Handling: LR 100-2300 Conveying technology: Roller conveyor included CE marking: available Full maintenance and acceptance history Complete last test report Incl. conveyor belt Incl. safety cage Machine equipped with water battery Machine without material hopper Leveling elements Interface: EUROMAP 12 Tedpfxoy D Adtj Ad Rja Electrical Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty valid until first commissioning Loading/Shipping Free loaded onto buyer's truck or free delivery against freight reimbursement Available ex stock Hanover / Germany

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, en Tjdov Stbmjpfx Ad Rja

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines on an ongoing basis. Year of manufacture: 2010 We have been a wholesaler of used injection moulding machines for over 25 years. Current notice – Tax benefit for used machines: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Tedpfxexqhuue Ad Rsa Model: KM 250 1000 CX Control system: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Equipment / Extras: - 2 x core pull (movable core pull, fixed core pull) - Pneumatic valve 1 on moving platen - Accumulator for increased injection capacity - Fast SK demounting CX Midrange - Ejection of cold sprue - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard - Graphic analysis and maintenance notifications - Electronic coding of injection unit - Pneumatic valve at fixed platen for air blast - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target vs. actual - PV control - Active backpressure regulation - From first ownership – origin Germany - Maintained regularly by manufacturer and previous owner Clamping unit: Clamping force: 2500 kN / 250 tonnes Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Maximum daylight: 820 mm Minimum mould height: 330 mm Maximum opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation (manual, software) Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately. The machine is offered fully tested and functional. The machine is our exclusive property. The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power. About our company and equipment offered: - We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse - All offered machines are inspected and tested before disassembly - We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines - All offered machines come from successful businesses where maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 35.808 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 204 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 186 g, Here we, as dealers in injection moulding machines, are offering the following well-maintained pre-owned injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesale distributors of injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial Number: 61013142 Year of Manufacture: 2009 Operating Hours: 35,808 h Control: MC 5 Fully functional Very well-maintained condition Machine comes from first ownership in Germany xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - Pneumatic valve 1 at BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap interface 18 on FWAP - Electric ejector plate in BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection-compression moulding circuit - 2x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - 8-circuit water manifold - 8x temperature control zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up circuit, QS package, cycle time analysis, cycle memory, event log - BluePOWER package: energy consumption display - Graphic analysis package, trend diagram - Interface for temperature control unit - Cycle time analysis, cycle value optimization Main language German Todpfoyrd U Ujx Ad Roa Injection Unit: Screw diameter: 40 mm Shot weight: 186 g/PS Injection pressure: 1,860 bar Shot volume: 204 ccm Clamping Unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen dimensions: 655 x 670 mm Mould height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 100 mm / 22 kN Fully electric clamping unit Warranty: Warranty until initial commissioning Loading/Shipping: Free loaded on buyer's truck or free to destination against reimbursement of freight costs Available ex our warehouse in Hanover, Germany

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 47.137 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61020607, gaya penjepit: 1.300 kN, jarak antara tiang: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax notice and benefit for used machinery: As of July 1, 2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth booster (Section 7 (2) EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower, 2-color, 2-component machine Control: MC6 Year: 2014 Machine No.: 61020507 Operating hours: 47,137 h Complete service record for the past 7 years / 25,000 h of operation 1st injection unit 750 horizontal Injection unit/screw: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd injection unit 180 vertical Injection unit/screw: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2500 bar Clamping unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. platen spacing: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Tedpfx Adjyf Uy Us Roa Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – Full machine data sheet attached as PDF Nozzle side: needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Water circuit BGS: 6 zones each on nozzle and ejector side BluePower technology – up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripherals shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck, or free delivery to location against reimbursement of freight costs. Information about the company and our machines: - We only sell machines purchased from running production, stored at our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All offered machines come from successful companies where maintenance and care are standard practice - All available machines can be viewed in our warehouse.