Beli Mte K25 bekas (978)

Tahun pembuatan: 2002, Kondisi: baik (bekas), nomor mesin/kendaraan: RHKBK250KG, DEMAG KBK crane ceiling with crane runway, approx. 6x5m Load capacity / lifting capacity: 250 kg (0.25 t) Fedpfx Alorft Nhsyepk Technical specifications of the system: Crane runway made from Demag KBK2 profile rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, brackets/hangers, etc. Including Demag DK 250kg electric chain hoist Crane has been dismantled and is available immediately Used condition, see photos Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are available from stock! Other KBK systems also available. Load capacities from 125kg to 1600kg. Please inquire about your crane runway with required load capacity and dimensions, no obligation.

Kondisi: bekas, Fungsionalitas: belum diuji, nomor mesin/kendaraan: Ultraweld-40, tegangan masuk: 220 V, Amtech Ultraweld 40 mesin las logam ultrasonik bekas dengan suku cadang dan pengontrol Pabrikan: Amtech Model: Ultraweld-40 (aktuator R4A) Fpodpfx Aljx A A Exeyjk Dilengkapi dengan buku manual.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in both industrial and laboratory environments. The device is commonly used for: • Quality control (QC) • End-of-line production testing • Laboratories and OEM test stations — Basic specifications • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last ETL factory calibration: 05/2023 • Weight: 38kg — Fjdpoyc H N Nofx Alyopk Equipment / included in the set • Main ATS 400 X8 unit with built-in touchscreen • Windows 10 Pro operating system (OEM) • Full set of test cables and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE marking — Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering, all connectors and interfaces are complete

Tahun pembuatan: 2025, Kondisi: baru, RS-9 was specifically designed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine being operated. The shredder allows fast and safe shredding of paper, which is taken directly from the die-cutting machine, to enable easy transport to the baler via a conveyor system. Fpedpfsiklxbsx Alyek The RS-9 shredder is designed for shredding waste from a die-cutting machine for easy transport via a belt conveyor system. Our shredder is very easy to operate. It features Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 offers the ability to retract the shafts, which ensures operator safety and extends the device’s service life. The machine is equipped with a frequency inverter enabling soft start and motor operation control. Feel free to contact us.

Kondisi: baik (bekas), Tahun pembuatan: 2010, panjang sabuk konveyor: 900 mm, lebar sabuk konveyor: 1.300 mm, Panjang: 900 mm Fjdpjzd T Iajfx Alyjpk Lebar: 1300 mm Tersedia dua unit Harga per unit: 500 EUR

Tahun pembuatan: 1995, Kondisi: baik (bekas), nomor mesin/kendaraan: TH2001/0165-0166, DEMAG KBK crane sky crane runway with dimensions approx. 9x7m (7m bridge) This crane is available several times! Payload / lifting capacity: 500 KG - 0.5 t Technical data of the system: Crane runway made of Demag KBK1+2 rails Fedpfxsvdncvs Alyopk System is delivered complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Including 500kg Demag DK2 chain hoist – lifting height approx. 3.5m Crane is dismantled and available immediately Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarding or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Payload 125KG - 1600KG Please inquire about your crane runway with required capacity and dimensions without obligation.

Tahun pembuatan: 1977, Kondisi: baik (bekas), nomor mesin/kendaraan: TH2001/180, DEMAG KBK overhead crane runway with dimensions approx. 3x7m (7m bridge) Multiple units of this crane available! Rated load / lifting capacity: 500 KG - 0.5t Fpjdpfjvdmndjx Alyok Technical data of the system: Runway constructed from Demag KBK2 profiles System delivered complete: KBK tracks, rail connectors, trolleys, end plates, supports/hangers, etc. Including 500 kg steel chain hoist - lifting height approx. 3.5m Crane is dismantled and available immediately Used condition, see photos Item location: 75053 Gondelsheim Shipping via freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems available as well. Load capacity from 125 kg up to 1600 kg Please inquire about your crane runway specifying load capacity and dimensions without obligation.

Tahun pembuatan: 1977, Kondisi: baik (bekas), nomor mesin/kendaraan: TH2001/0171-0173, DEMAG KBK overhead crane runway with dimensions approx. 10x7m (7m bridge) Multiple units of this crane available! Load capacity / lifting capacity: 500 kg - 0.5 t Technical data of the system: Crane runway made of Demag KBK1+2 rails Fpsdpfx Ajvdnivolysk The system is delivered complete: KBK rails, rail connectors, trolleys, endplates, brackets/hangers etc. Including 500 kg electric chain hoist - lifting height approx. 3.5 m Crane is dismantled and available immediately Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarding or collection by appointment only Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems available. Capacity from 125 kg to 1600 kg Please inquire for your desired crane runway with required capacity and dimensions, free of obligation.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, jam operasional: 5 h, Silinder hidrolik dalam berbagai ukuran tersedia di stok lainnya atas permintaan atau juga di toko jöma Silinder berwarna hitam ini telah digunakan maksimal 1–5 jam pada mesin press prototipe berpaten Fsdpfsr Hnfcjx Alyspk

Tahun pembuatan: 1990, Kondisi: bekas, Baujahr: 09/2000 Neu: Nein Keine Garantie. Bitte kontaktieren Sie uns, falls Sie nicht das gewünschte Produkt finden. Fpjdpfxovzyvpe Alyok

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 89257, gaya penekanan: 60 t, tegangan masuk: 380 V, tinggi total: 2.000 mm, jenis arus masuk: tiga fasa, tinggi kerja: 2.000 mm, panjang total: 9.500 mm, lebar kabinet kontrol: 1.000 mm, lebar total: 2.000 mm, tahun perombakan terakhir: 2026, tekanan: 100 batang, tegangan kontrol: 12 V, tinggi benda kerja (maks.): 120 mm, kecepatan rotasi (maks.): 6.000 rpm, tekanan udara: 8 batang, Kami menawarkan lini finger jointing WEINIG Dimter HK200 siap pakai ini, tahun pembuatan 1996. Fsdpfjzatztjx Alyspk Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: perlu perbaikan (bekas), Fungsionalitas: belum diuji, Instalasi finger joint untuk paket kayu Dimter HK 400 finger joint line Panjang masuk: 800–6.000 mm Tinggi pengefraisan: 285 mm, opsional 300 mm Warna: Biru Terdiri dari: Pos. 01 Pengemasan Pos. 02 Konveyor rol paket Pos. 03 Mesin frais sentral Pos. 04 Konveyor rol paket Pos. 05 Pemisahan paket Pos. 06 Konveyor rantai melintang Pos. 07 Konveyor rol pengisian Pos. 08 Press siklus Pos. 09 Unit pengumpan Pos. 10 Gergaji potong panjang Termasuk panel kontrol dan meja operasi Instalasi membutuhkan perbaikan dan dijual sebagaimana kondisinya sekarang. Sudah dibongkar dan disimpan di Achern. Semua dokumen teknis lengkap. Untuk pertanyaan dan informasi teknis tentang instalasi, kami siap membantu setiap saat. Kami akan mendampingi Anda secara konsultatif selama perbaikan dan pemasangan. Fpsdpjvi Hw Njfx Alysk

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Fpsdpfxjv Rpxlj Alyek Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Fsdpfjchuvrex Alyjpk

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. Fpjdpfx Alsgfm Rysyok The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baik (bekas), Clean air extraction Used machine, good condition Pictures to follow Fpedpfx Aljrb D Noysk Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) Fedpfx Asffh Atolyopk CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Fpedpfxegmfa Ao Alyek Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, MESIN LAS L OTOMATIS DENGAN TEROWONGAN TERINTEGRASI F-AUTO 3550 COMBO tahun 2011 Maks. panjang produk: 500 mm Maks. lebar produk: 350 mm Maks. tinggi produk: 150 mm Jenis film: Poliolefin - PE Tinggi input & output: 900 mm + 50 mm dapat disesuaikan Output (ukuran A4): Tergantung produk - hingga 35 kemasan/menit Diameter gulungan film: Int. 76mm / Ekst. 350mm Maks. lebar gulungan: 550 mm Tegangan & konsumsi daya: 230V/400V 3-fasa 8 kW Fpodpjw Nx Nbefx Alyjk Tekanan pneumatik: 6 bar Berat: 700 kg Dimensi PxLxT: 2700 x 1200 x 1550 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 450 mm, ketinggian potong (maks.): 250 mm, kedalaman pemotongan: 200 mm, lebar pemotongan (maks.): 250 mm, panjang total: 25.000 mm, tahun perombakan terakhir: 2025, Latvijas kokapstrādes uzņēmums piedāvā pārdošanai Weinig Dimter OptiCut 304 L optimizācijas šķērsgriešanas līniju. Fpodpfxeza Iade Alyok Iekārtai ir bijuši tikai divi īpašnieki – abi labi zināmi uzņēmumi Latvijā. Pēdējos 8 gadus iekārtu esam darbinājuši paši. Pārdošanas iemesls – nesen iegādāta jauna Weinig tehnika. Iekārta ir pilnā darba kārtībā, šobrīd uzglabāta apsildāmās telpās un gatava nodošanai nākamajam īpašniekam. Iekārta strādājusi tikai vienā maiņā. Aprīkota ar 5 šķirošanas cilindriem, taču šķirošanas konveijeru iespējams pagarināt un uzstādīt papildu cilindrus, ja nepieciešams. Iekārtu iespējams apskatīt un demonstrēt darbībā mūsu ražotnē. Visa iekārtas ekspluatācijas laikā veikta regulāra apkope un remonti, lai nodrošinātu maksimālu ražīgumu, rentabilitāti un optimizācijas kvalitāti. Iekārta darbojas ar izcilu precizitāti. Oriģinālā rūpnīcas komplektācija nav mainīta. Rezerves daļas regulāri iegādātas no oficiālā Weinig dīlera Latvijā. Iekārta skatāma un testējama Kuldīgā, Latvijā. Pieejamas arī dažas rezerves daļas šai iekārtai. Pieejama visa Weinig ražotāja oriģināldokumentācija. Pārdodam arī Weinig pirkstsavienojumu līniju, kas iegādāta kopā ar šo iekārtu. Sīkāka informācija atsevišķā sludinājumā. Sīkākai informācijai lūdzam sazināties pa tālruni vai e-pastu – sniegšu visu tehnisko informāciju, kā arī varu sagatavot papildus attēlus vai video.

Kondisi: bekas, Mesin pelapisan SL-940 Alat yang digunakan: SC350 + SC400, BlueWave200 Tersedia 20 unit mesin. Tahun produksi: 2022 dan 2023 Harga mulai dari 33.000€ Fpedpfx Alsx Tgyweyjk Konfigurasi sesuai permintaan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Weinig Dimter Profipress C 2800 P - 6 m Gluing Press, year 2009 Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: very good Fpsdoyvgiaspfx Alyjk Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of laminated timber panels and components from softwood. The machine is engineered for efficient production using PVAC glue in class D2 / D3 and can process materials within defined width, thickness, and input length parameters. According to the documentation, this model can accommodate materials with a width of 30 to 80 mm, thickness of 15 to 40 mm, and input lengths from 2100 to 2800 mm. The machine allows for the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. Capacity is up to 10–15 cycles per minute, depending on the input width. The Profipress C 2800 P - 6 m is intended for softwood processing. The permissible curvature of the material is max. 5 mm per meter. The documentation also specifies the recommended operating conditions, including an ambient temperature of 15 to 30 degrees Celsius and relative humidity of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Output: max. 10–15 cycles/min, depending on input width - Wood width: 30–80 mm - Wood thickness: 15–40 mm - Input wood length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Type of wood: softwood - Permissible curvature: max. 5 mm/m - Adhesive type: PVAC D2 / D3 - Recommended working temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press intended for laminated panel production - Machine from renowned manufacturer Weinig Dimter - Capacity up to 10–15 cycles per minute - Capability to produce panels with variable widths - Suitable for softwood processing - Compatible with standard PVAC D2 / D3 adhesives - Industrial application in joineries and production facilities

Kondisi: bekas, Tahun pembuatan: 2002, 1 Fpjdpfx Aljy Nm Rujysk

Tahun pembuatan: 2007, Kondisi: bekas, masch1 Fsdpfx Ajxbpg Hslyopk

Tahun pembuatan: 2013, Kondisi: bekas, Betriebsbereiter Zustand. Bitte fordern Sie weitere Informationen an! Fodpfey Uwirox Alyepk