Beli Rahang Rohm 630 Mm bekas (81.372)

Kondisi: bekas, Jaw width 160 mm Clamping force 24 kN Machine weight approx. 31 kg Mechanical centric vice, low-profile design With prism jaw and standard jaw, SBO size 4 Chjdpfxed Ih N Rj Abvsc Including rotary plate with graduated scale

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, daya: 84 kW (114,21 hp), ketinggian potong (maks.): 450 mm, diameter mata gergaji: 630 mm, jenis aktuasi: listrik, kecepatan rotasi (maks.): 1.480 rpm, Walter 84kW, Gergaji Pita Multi-Mata Dimensi Panjang 3440 mm Lebar 1900 mm Tinggi 1700 mm Parameter Pemotongan Diameter maksimum batang yang akan digergaji: 450 mm Diameter gergaji melingkar: 630 mm Lebar minimum tumpukan tengah: 60 mm Jumlah maksimum gergaji per spindel: 4 buah 2 spindel, satu di atas dan satu di bawah Motor Codpfx Aez H T Ayobvehc Daya motor untuk penggerak bawah: 52 kW Daya motor untuk penggerak atas: 41 kW Kecepatan spindel: 1480 putaran/menit Kecepatan umpan variabel: 0–15 m/menit (0–25*) Daya motor untuk penggerak umpan: 4 kW Peralatan Tambahan Pemutar batang untuk memutar dan memposisikan batang hingga panjang 6 m Pemisah bahan samping untuk material hingga panjang 6 m

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25MythoSarya10, Mesin pamer Mytho S dengan TP / potongan tapal kuda, dapat diakses dari permukaan tanah dengan truk pengangkat dan E-Ameise VERSI MAST Chjdpfx Abez Ipunsvsc Tinggi lilit 2450 mm 99 program Layar sentuh 7" SISTEM PENGGULUNG FILM TIPE “PRS” (POWER ROLLER STRETCH) 200% Peregangan awal. Opsional, peregangan awal lebih banyak atau lebih sedikit juga dimungkinkan MEJA PUTAR / TP Ø1650 mm / Bukaan 06.00 - 12.00 (Dapat diubah kapan saja) Sistem ARYA untuk peniupan dan pemotongan film otomatis, termasuk kendali jarak jauh inframerah.

Kondisi: baik (bekas), Data teknis untuk palang rak palet: Csdjz Ix Rfspfx Abvjhc Sistem rak: Jungheinrich Tipe: MPB Isi paket pengiriman: 01x Palang rak palet, bekas Warna material: RAL 1007 Kuning Narcissus Profil kotak: 125 x 50 mm Tipe palang: AUF´B´E 0485|15 Pengait: 4 HK (kait) Lebar bersih: 2.700 mm Beban maksimum per pasangan palang: 2.400 kg, dengan beban terdistribusi secara merata. 02x Pin pengaman, bekas Desain: sepenuhnya dilapisi seng Untuk mengamankan balok longitudinal Terhadap pengangkatan yang tidak disengaja Kontak Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Produk ini hanya ditawarkan untuk pengambilan langsung. Jika ada permintaan tambahan untuk pengiriman atau pengiriman produk ini, akan dikenakan biaya tambahan, yang akan ditanyakan secara terpisah tergantung pada lokasi pengiriman atau isi paket.

Kondisi: baru, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 820 mm, jarak gerak sumbu Z: 610 mm, tinggi benda kerja (maks.): 450 mm, berat benda kerja (maks.): 500 kg, jumlah slot dalam magazin alat: 60, produsen pengendali: HEIDENHAIN, berat keseluruhan: 14.000 kg, model controller: TNC 7, pasokan pendingin: 40 batang, daya motor spindle: 32 W, pergerakan cepat sumbu Z: 48.000 m/menit, gerak cepat sumbu X: 48.000 m/menit, pergeseran cepat sumbu Y: 48.000 m/menit, diameter meja putar: 630 mm, kecepatan rotasi (maks.): 12.000 rpm, hidung spindel: SK 40 BIG PLUS (BVD 40), diameter alat: 150 mm, panjang alat: 300 mm, berat alat: 8 g, diameter benda kerja (maks.): 750 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Pusat pemesinan 5 sumbu LAGUN EVZ 630 yang baru, dengan desain gantry, menawarkan presisi, dinamika, dan efisiensi tertinggi dalam pemesinan modern. Mesin ini unggul berkat desain gantry yang kuat, stabilitas termal yang tinggi, serta teknologi kontrol dan penggerak HEIDENHAIN yang paling mutakhir. Ideal untuk pembuatan perkakas dan cetakan, teknik mesin, serta produksi sesuai pesanan yang kompleks. Keunggulan dalam sekilas: ✔ Pengiriman dan pemasangan oleh teknisi JMT ✔ Dukungan dan layanan teknis di lokasi di Jerman ✔ Pelatihan dan instruksi bagi operator ✔ Pilihan pembiayaan yang fleksibel: sewa atau sewa dengan opsi pembelian ✔ Garansi 24 bulan Peralatan teknis: Kontrol: Codpfx Absp Nnutevehc • Sistem kontrol jalur digital HEIDENHAIN TNC 7 • Layar TFT HEIDENHAIN 19" • Motor dan sistem pengukuran HEIDENHAIN • Roda tangan elektronik HEIDENHAIN HR 510 Termasuk aksesori berikut: ✔ Konveyor serpihan dengan sabuk engsel memanjang ✔ Penutup penuh dengan pembukaan pintu otomatis untuk akses yang nyaman dan ergonomis ke ruang kerja ✔ Panel kontrol ergonomis Akurasi: Akurasi posisi: ± 0,005 mm Akurasi pengulangan: ± 0,003 mm Hubungi kami – kami akan dengan senang hati memberikan saran dan menyiapkan penawaran khusus untuk Anda.

Kondisi: baik (bekas), Chuck ulir, chuck pengulir, chuck tap ulir, alat frais, perangkat pemotong ulir, chuck ulir dua rahang Cedpfsxdw Svox Abvshc -Pabrikan: Röhm, chuck ulir dua rahang dengan sambungan MK3 -Tipe: MK3 B24 -Penahan alat: persegi hingga 24 mm, lihat foto -Dimensi: Ø 85 x 245 mm -Berat: 4,4 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth Chsdpfx Abjmhhf Sovec - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Chedpsmhhl Hofx Abvjc Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: baik (bekas), Technical data for pallet racking beam: Chsdpfxolnbp Ej Abvoc Racking system: META (Thyssen) Scope of delivery includes: 01x Pallet racking beam, used Material color: orange Beam type: HN 100|20 Box profile: 100 x 50 mm Connector: 4 HK (hooks) Clear span: 3,300 mm 02x Locking pins, used Design: fully galvanized For securing the beams against unintentional lifting

Kondisi: baik (bekas), Dimension: Width: approx. 2,900 mm Height: approx. 1,038 mm Depth: approx. 1,100 mm Technical specifications for the workbench frame: Manufacturer: Jung Heinrich Type: T Scope of delivery includes: 02x Workbench uprights, used Material colour: blue Upright height: 1,000 mm Upright depth: 1,100 mm Upright profile: 100 x 65 mm Incl. horizontal and diagonal braces, base plates Uprights are pre-assembled (welded truss construction) 02x Workbench beams, used Material colour: yellow Box profile: 120 x 50 mm Beam type: HN 120|25 Clear span: 2,700 mm 04x Safety pins, used Design: fully galvanised Cedpslnfi Rsfx Abvshc 01x Chipboard panel, second grade, used Chipboard thickness: 38 mm Chipboard width: 2,900 mm Chipboard depth: 1,100 mm Panels may consist of two parts 08x Self-drilling screws, new Design: galvanised Dimensions: 6.3 x 70 mm Images are for illustrative purposes only. Actual material colour may vary. - The workbenches are picked and shipped unassembled; - The workbench uprights are pre-assembled; - Standard production time is approx. 3 - 5 working days.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Cjdpfxomhh Dto Abvjhc Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth Cedpomidyfefx Abvohc - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: baik (bekas), Technical data for rack connector: Racking system: Stow Type: Pal Rack NS Included in delivery: 01x Rack connector, used for rack spacing: 250 mm Overall length: 250 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material finish: Sendzimir galvanized Borehole diameter: 11 mm Weight: 0.330 kg | each Csdsmqk Svopfx Abvjhc 02x Bolts M10 x 35 mm 02x Nuts M10 General information about the article: This item is only available for collection. Any requested transport or shipping of this item is subject to additional costs, which can be requested from us separately depending on the delivery location and scope.

Kondisi: baik (bekas), Technical data for rack connector: Racking system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Rack connector, used for rack spacing: 360 mm Total length: 360 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material finish: Sendzimir galvanized Borehole diameter: 11 mm Weight: 0.480 kg | pc Chjdpfjmqldkox Abvjc 02x Bolts M10 x 35 mm 02x Nuts M10 General information about the item: This item is offered for collection only. Additional costs will apply for transport or shipping, which can be individually requested depending on delivery location and order volume.

Kondisi: baik (bekas), Technical data for pallet racking beam: Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x Pallet racking beam, used Material color: RAL 5010 gentian blue Box profile: 120 x 50 mm Beam type: TRV1-280-125-30 CE Bracket: 5 HK (hooks) Clear width: approx. 2,800 mm Max. load per pair of beams: 3,000 kg, with evenly distributed load. 02x Locking pins, used Design: fully galvanized For securing the cross beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Chsdpfxewb Dbus Abvsc Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipment is required, additional costs will apply. These can be requested separately from us depending on the delivery location or scope of delivery.

Kondisi: baik (bekas), Technical Data for Pallet Rack Beam: Racking System: Stow Type: Pal Rack NS Scope of Delivery Includes: 01x Pallet Rack Beam, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Beam type: PNB0488 Connector: 4 HK (hooks) Clear length: 2,500 mm Max. load per pair of beams: 1,000 kg with evenly distributed load Chjdpfxjwaghne Abvsc 02x Safety pins, used Finish: fully galvanised For securing the load beams against unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transportation or shipping of this item on request is subject to additional costs, which can be provided separately depending on place of delivery or shipment scope.

Kondisi: baik (bekas), palettenregaltraverse-techdaten-2024 Chsdowlhapopfx Abvec

Kondisi: baik (bekas), Technical data for pallet rack beam: Rack system: Polypal Type: Stockpal Scope of delivery includes: 01x Pallet rack beam, used Material color: orange Box profile: 90 x 50 mm Type: SKVBN 09050CP22 Bracket: 2 HK (hooks) Design: Top beam Clear span: 1,850 mm 02x Safety pins, used Design: fully galvanized For securing the longitudinal beams Cjdpowlm Nvefx Abvehc Prevents accidental lifting Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If you require transport or shipping beyond this, additional costs will apply, which can be requested from us depending on the delivery location and scope.

Kondisi: baik (bekas), live centre, revolving centre, revolving Morse taper, revolving centre point, revolving lathe centre, centre point, centring taper -Manufacturer: Röhm / unknown, 3 revolving centre points -Type: Röhm 110HVL MK5 / 2x without type designation -Taper: MK5 -Price/sale: complete set Chodpfx Abjwvgqhevec -Transport dimensions: 280/270/H95 mm -Total weight: 14.3 kg

Kondisi: baik (bekas), Data teknis tiang rak palet: Sistem rak: Bito Tipe: PRO Termasuk dalam pengiriman: 01x Tiang rak palet, bekas Warna material: galvanis sendzimir Profil rangka: P5 Chedpfjx Hz Dwox Abvoc Ukuran profil: P 100 x 76 x 2,25 mm Termasuk batang melintang dan diagonal, plat kaki, dan pelindung tiang Tiang sudah dirakit sebelumnya (konstruksi rangka sekrup) Tinggi: 12.400 mm Kedalaman: 1.100 mm Kontak Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang barang: Barang ini hanya ditawarkan untuk pengambilan sendiri. Pengiriman atau pengangkutan barang ini akan dikenakan biaya tambahan yang bisa ditanyakan secara terpisah sesuai lokasi pengiriman dan jumlah barang.

Kondisi: seperti baru (mesin pameran), panjang pemakanan sumbu X: 800 mm, lebar perataan: 800 mm, Mesin serut dua sisi. Kondisi kerja sangat baik. Cjdpfsx Rrykox Abvshc

Kondisi: baik (bekas), palettenregaltraverse-td1 Chedpfx Asxzyi Sebvsc

Tahun pembuatan: 2019, Kondisi: bekas, Berat Berat kosong: 1.500 kg Fungsional Kapasitas angkat: 200 kg Tinggi angkat: 3.000 cm Tanda CE: ya Kondisi Kondisi umum: baik Kondisi teknis: baik Kondisi visual: baik Chjdozcp I Iopfx Abvjc Informasi lebih lanjut Syarat pengiriman: EXW Dimensi transportasi (P x L x T): 7,8 x 1,58 Informasi lebih lanjut Silakan hubungi Christian Theißen untuk informasi lebih lanjut. Produsen: Emminghaus Tipe: Pionier 120-6-30 Tahun produksi: 2019 Jenis produk: Bekas Data: Tinggi angkat maksimum: 30,00 m pada 85° Beban angkat: 200 kg Ukuran platform P x L: 1,25 x 0,90 m Ukuran platform dalam kondisi diperluas P x L: 2,08 x 1,32 m Lebar penyangga: 4,00 x 4,00 m Dimensi transportasi P x L: 7,80 x 1,58 m Berat: 1.500 kg Fitur khusus: penggerak hidrolik dengan mesin bensin (bebas jaringan listrik), dapat diputar pada sasis, coupling bola dengan beban vertikal 50 kg.

Kondisi: baru, Data teknis mengenai palang rak palet: Sistem rak: Stow Tipe: Rak Palet NS Paket pengiriman mencakup: 01x Palang rak palet, baru Warna material: RAL 2004 oranye Profil rangka: 160 x 50 mm Tipe palang: PNB0436 Pengait: 4 HK (kait) Lebar bersih: sekitar 3.300 mm Beban maks. per pasangan palang 4.500 kg dengan beban yang terdistribusi secara merata 02x Pin pengaman, bekas Desain: sepenuhnya dilapisi seng Untuk mengamankan rangka longitudinal agar tidak terangkat secara tidak sengaja Kontak kami di perusahaan: Codpfx Ajzlhr Aebvehc Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum mengenai produk: Produk ini hanya ditawarkan untuk pengambilan langsung. Jika ada permintaan pengiriman tambahan, atau pengiriman produk ini, akan dikenakan biaya tambahan, yang akan ditanyakan secara terpisah tergantung pada lokasi pengiriman atau isi paket pengiriman.

Kondisi: baik (bekas), Tahun pembuatan: 1999, diameter luar chuck: 250 mm, lubang tembus: 75 mm, Aksesori Pemesinan ROHM - 250 MACH-ID 2997 Produsen: ROHM Tipe: 250 Tahun pembuatan: 1999 Diameter: 250 mm Chuck 4 rahang: ya Csdpjzdih Defx Abvjhc Lubang spindle: 75 mm Harap diperhatikan: Informasi pada halaman ini disusun berdasarkan pengetahuan terbaik kami dan, jika memungkinkan, dari produsen. Informasi diberikan dengan itikad baik namun keakuratannya tidak dapat dijamin. Oleh karena itu, informasi ini tidak menjadi jaminan atau persyaratan kontrak. Kami menyarankan Anda memeriksa sendiri semua detail penting.