Beli Traub - Wendel Pemegang Alat Yang Digerakkan bekas (29.055)

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1993, jam operasional: 40.042 h, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 1009, diameter putar di atas sled silang: 345 mm, panjang pembubutan: 1.000 mm, diameter pembubutan: 550 mm, lubang spindel: 80 mm, kecepatan spindel (maks.): 3.200 rpm, kecepatan spindel (min.): 50 rpm, jarak pergerakan sumbu X: 285 mm, jarak gerak sumbu Z: 1.070 mm, daya motor spindle: 34 W, gerak cepat sumbu X: 10 m/menit, pergerakan cepat sumbu Z: 15 m/menit, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 3.150 rpm, tinggi total: 2.180 mm, panjang total: 5.755 mm, lebar total: 2.350 mm, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 7.500 kg, diameter luar chuck: 315 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Traub TND 550, tahun produksi 1993 Jam operasional: sekitar 40.000 jam Mesin saat ini masih digunakan setiap hari dan pada dasarnya berfungsi. Terdapat kekurangan/kerusakan yang diketahui sebagai berikut: - Pergantian gigi transmisi tidak berfungsi. Mesin selalu berada pada tingkat gigi 2 (rentang putaran hingga sekitar 3.200 rpm). - Peralatan penggerak tidak berfungsi. - Pengoperasian kepala tetap (tailstock) menggunakan saklar rocker tambahan. - Revolver hanya dapat bergerak atau berganti mode pada kecepatan sangat lambat. - Ball screw pada sumbu X menimbulkan suara berjalan. Ijdozd Udijpfx Aa Doti Ball screw tersebut telah menghasilkan suara seperti disebutkan sejak pembelian mesin pada tahun 2021. Meski demikian, pembuatan pas H7 tetap dapat dilakukan secara andal. Penyebab pasti dari masalah yang disebutkan belum dilakukan pemeriksaan menyeluruh. Informasi tentang kemungkinan penyebab cacat/kerusakan diberikan tanpa jaminan. Penjualan dilakukan secara bekas, tanpa jaminan maupun garansi atas cacat/kerusakan yang disebutkan maupun kemungkinan kerusakan lainnya.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 124.706 h, kecepatan spindel (maks.): 6.300 rpm, jarak pergerakan sumbu X: 370 mm, jarak gerak sumbu Z: 250 mm, daya motor spindle: 10.700 W, produsen pengendali: TRAUB, model controller: TX8i (64-bit), jumlah sumbu: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced features such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking for a high-quality lathe, you should consider the TRAUB TNK 36 horizontal lathe that we are offering for sale. Contact us for further details. TECHNICAL DETAILS • MDE interface: Yes • Tool monitoring: Yes • Rigid tapping: Yes (without compensation chuck) • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Upper turret stroke X/Z: 50 / 100 mm • Rear attachment stroke X: 73 mm • Rear attachment stroke Y: ±50 mm • Main spindle C axis: Yes • Hainbuch quick change components: Yes • Hainbuch set-up aid base body: Yes • Hainbuch manual quick-change device: Yes • Counter spindle: Motor spindle • Counter spindle C axis: Yes • Bar loader pressure management device: Yes • Workpiece ejector: Yes • Hainbuch Axfix chuck: Yes • Upper tool carrier: Yes Iodoza Ucxepfx Aa Djti • Electronic gearbox: Yes • X3 transverse axis for front attachment: Yes • Front unit: 5-position • Driven tools at front unit: Yes • Cut-off side machining station: Yes • Driven tools at cut-off station: Yes • Workpiece unloading device: Gripper • Coolant tank capacity: 230 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Internal coolant supply: 30 bar • High-pressure coolant: 120 bar (front and rear machining station) • Coolant filter: Knoll VRF 150/750 vacuum rotary filter • Suitable filter materials: Aluminium, plastics, brass, steel • Washdown gun: Yes • Connected power: 22 kW • Maximum bar length: 3 m • Maximum bar diameter: 36 mm • Operating voltage: 400 V, 3~, 50 Hz • Control voltage: 24 V AC • Valve voltage: 24 V DC • Clutch voltage: 24 V DC • Total installed power: 33 kW • Rated total current: 60 A OPTIONAL EXTRA EQUIPMENT • FMB turbo 5-42 XT / 3200 "C" bar feeder • Bar loader year: 2003 • Hinged belt chip conveyor • Chip conveyor discharge height: 950 mm • Guide tubes D25, D36 • Live part stop, shaft 16 × 16 mm • Brankamp CMS 100 collision monitoring Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Kondisi: bekas, CNC lathe TRAUB Type TND 400 Serial No. 708 Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swing diameter over bed max. 470 mm Spindle bore in draw tube: 65 mm Spindle drive motor power: 22 kW Total power requirement: 35 kW Power supply: 380 Volt, 50 Hz Iedpfx Aezacwdja Deti - Electronic handwheel - RS 232 data interface - Disc turret with 12 tool stations VDI 40 - incl. 8 tool holders VDI 40 - 3-jaw power chuck Ø 225 mm SMW Autoblok, Type KNCS-N- Ø 225-65 plus a large assortment of chuck jaws - Hydraulic hollow clamping cylinder SMW, Type ZHDAS-130-67 - Chip conveyor KNOLL, Type 200 S-1/600 - Coolant system - Adjacent hydraulic power unit (L x W x H 650 x 500 x 1000 mm) Required floor space L x W x H: 4800 x 2000 x 2100 mm Main machine footprint L x W x H: 3500 x 2000 x 2100 mm Chip conveyor footprint L x W x H: 4500 x 700 x 1550 mm Weight approx. 5 tons Good condition Machine is ready for demonstration. The hollow clamping cylinder for workpiece clamping needs to be repaired.

Kondisi: bekas, Tahun pembuatan: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm CNC control: TX-8 Spindle bore: 60 mm Itjdju Rqabjpfx Aa Dsi Spindle speed: 63 - 3,150 rpm / 2-stage Rapid traverse: 10,000 mm/min Tool turret - number of stations: 8 Operating hours / on-time hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions approx. (LxWxH): 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Equipment: 200 mm diameter hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setup

Kondisi: bekas, Tahun pembuatan: 1993, Detail Teknis: Gerak x: 400 mm Gerak y: 300 mm Gerak z: 400 mm Kecepatan spindle: 8000 rpm Kontrol: Fanuc OM Meja penjepit: 500x300 mm Jumlah tempat magazin: 16 buah Taper alat: SK40 Jarak spindle kerja/permukaan penjepit maks.: 50-450 mm Jumlah palet: 2 buah/part Kebutuhan daya total: 10 kW Berat mesin sekitar: 2,5 t Itodpfxou Idn Hj Aa Dji Dimensi mesin (PxLxT): 2,4x1,8x2,5 m Ukuran transportasi mesin: 2,45x1,8x2,5 m - Lemari listrik - Sistem pendingin - Konveyor serpihan merk META (Tinggi angkut 1500mm; Lebar 200mm) Fungsi pergantian meja tidak beroperasi.

Kondisi: bekas, Tahun pembuatan: 1987, en-GB: Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Max. workpiece diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on): 23,495 h Tool turret: 12 stations Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Tool holder: cylindrical shaft DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200 mm, hydraulic clamping Iedpfju Ix N Sox Aa Djti Operation via double foot switch and control panel/operator desk Coolant system The TRAUB features an integrated chip conveyor with an ejection height of 1,100 mm (currently not functional). Accessories: various small parts 8 machine feet (various) without tailstock as is.

Kondisi: baik (bekas), Tahun pembuatan: 1996, CNC turning center TRAUB Type: TNC65 DG, Year of manufacture: 1996, Control: TRAUB TX8F Isdpfeu Eug Ijx Aa Deti Comes with extensive accessories.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 1.749.535 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6060449, panjang pembubutan: 305 mm, kecepatan spindel (maks.): 8.000 rpm, diameter pembubutan: 32 mm, lubang spindel: 32 mm, berat keseluruhan: 8.000 kg, kecepatan rotasi (maks.): 8.000 rpm, jenis arus masuk: tiga fasa, saluran batang: 32 mm, panjang total: 3.671 mm, tinggi total: 2.650 mm, kecepatan pemakanan sumbu X: 5 m/menit, laju pemakanan gandar Y: 5 m/menit, laju pemakanan sumbu Z: 5 m/menit, Diameter batang (maks.): 32 mm, lubang collet: 32 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, tegangan masuk: 400 V, daya: 36 kW (48,95 hp), jarak pergerakan sumbu X: 140 mm, jarak lintasan sumbu Y: 40 mm, jarak gerak sumbu Z: 305 mm, diameter penjepit: 32 mm, produsen pengendali: Traub System TX 8i - s V7, Perlengkapan: dokumentasi / manual, Mesin dalam keadaan teraliri listrik dan saat ini berproduksi setiap hari. Semua informasi ada pada lampiran. Mesin tersedia dalam waktu singkat. Konfirmasi pesanan dengan seluruh informasi mengenai mesin dan majalah pengumpan terdapat di lampiran. Harga baru: €444.857,70 bruto. Mesin ini sebelumnya merupakan mesin demonstrasi dari tahun 2016 hingga 2020. Harap perhatikan jumlah jam kerja. Mesin dijual termasuk majalah pengumpan FMB LSK38. Itodpfxezc Hmuo Aa Dji FMB LSK38 / 3200 "C"

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 x mesin bubut otomatis Traub A 25 Itodpfxozcdp Ho Aa Dei Perlengkapan: Tailstock bor Perangkat pembubutan panjang Pengumpan berat Mesin lengkap dan bagus dalam kondisi teknis sangat baik. Mesin dapat dilihat dalam keadaan menyala.

Kondisi: baik (bekas), Tahun pembuatan: 2003, en Iedpfx Aaszaud Ae Deti

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Swiss-Type Lathe Manufacturer: Traub Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Quality of bar material (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Travel X1 (mm): 35 - Travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Travel X2 (mm): 35 - Travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven Tool for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (quantity): 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Subspindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (quantity): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Iedpfx Ajy N A S Uoa Doti Rear Tool Device, Dragged / Stationary - Z-stroke dragged with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (quantity): 3 Rear Tool Device (X4 Axis) - X4 stroke (mm): 39 - Rapid traverse (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (quantity): 4 Driven Tool Unit for Rear Device (with X4 Axis) - Max. speed (rpm): 10,000 - Driven tool stations (quantity): 4 - Clamping diameter for drilling tools - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant System - Pump pressure, single stage (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - Bar feeder FMB Minimag 18 - High-pressure coolant system - Fire extinguishing system Subject to technical changes and errors.

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300 rpm, drive power: AC 6.7/10.7 kW, C-axis, Hainbuch interchangeable parts, base body installation aid, Hainbuch manual quick-change device, counter spindle: counter spindle as motor spindle, C-axis, setup for counter spindle pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool turret, driven tools, electronic gearbox, X3 cross-axis for front unit, 5-position front tool holder and parting/offside machining station with driven tools. Machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36. Coolant system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining stations, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass, and steel), rinse gun. Connected load: 33kW, control: TX8i (64bit), 10.4 inch flat screen monitor, additional part counter, V24 RS232 and MDE interface in the control cabinet. Operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder, chip conveyor, coolant unit and basic set of static and driven tool holders. On-site inspection is possible. Itodpsy U Nq Iofx Aa Dsi

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW RIGHT LOWER TURRET Itodpfeyw H Szsx Aa Dsi - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power rating: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed as of 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts belt conveyor

Kondisi: baik (bekas), Tahun pembuatan: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, sub spindle: 12 mm Sub spindle speed: 12,000 rpm Itjdpfx Aajt E Dbyj Doi Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Including (list not exhaustive): - Traub TNL 12/7 CNC Lathe - Meyrat high-frequency spindles, 2 pieces - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of delivery as per photo documentation No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), de-001 Itjdpfsy Tx Rzex Aa Dsi

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 344, berat keseluruhan: 7.000 kg, lebar total: 2.000 mm, panjang total: 11.000 mm, tinggi total: 1.900 mm, produsen pengendali: TRAUB, model controller: SYSTEM TX 8i, TRAUB TNK 36 CNC Turning Center Iodpfjyh Hkzex Aa Djti - Operating voltage: 460 V - Connection rating: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tool stations: 12 - Travel X-axis: 50 mm - Travel Y-axis (option): ±20 mm - Travel Z-axis: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Measurement system resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tool stations: 5 - Diameter: 40 mm - Spacing: 54 mm - Travel X-axis: 370 mm - Travel Z-axis: 250 mm - Rapid traverse X/Z: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Measurement system resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tool stations: 5 - Diameter: 40 mm - Spacing: 54 mm - Travel X-axis: 73 mm - Travel Y-axis: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Measurement system resolution X/Z: 0.0005/0.001 mm - Including the tool holders as seen in the photos, as well as a chip conveyor and coolant system by Resy, and a bar feeder by FNB, type: TURBO 5-42 Attention: Item must be definitively collected between 01 and 02.04.2026 at a date to be coordinated. FCA D-97944 Boxberg – loaded onto truck

Kondisi: baik (bekas), Tahun pembuatan: 2003, jam operasional: 18.538 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 431, berat keseluruhan: 7.000 kg, lebar total: 2.000 mm, panjang total: 11.000 mm, tinggi total: 1.900 mm, produsen pengendali: TRAUB, model controller: SYSTEM TX 8i, TRAUB TNK 36 CNC Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection rating: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tool stations: 12 - Travel X-axis: 50 mm - Travel Y-axis (option): ±20 mm - Travel Z-axis: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Measuring system resolution X/Y/Z: 0.0005/0.001/0.001 mm - Feed force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tool stations: 5 - Diameter: 40 mm - Spacing: 54 mm Itodpeyh Ivlofx Aa Doi - Travel X-axis: 370 mm - Travel Z-axis: 250 mm - Rapid traverse X/Y: 30/30 m/min - Feed force X/Z: 2,800/2,120 N - Measuring system resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tool stations: 5 - Diameter: 40 mm - Spacing: 54 mm - Travel X-axis: 73 mm - Travel Y-axis: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Feed force X/Z: 4,240/4,240 N - Measuring system resolution X/Z: 0.0005/0.001 mm - Including the tool holders shown in the photos, as well as a chip conveyor and a coolant system from Resy, and a bar loader from FNB, type: TURBO 5-42 Attention: The item must be collected by binding appointment between 01.04.2026 and 02.04.2026 (exact date to be coordinated). FCA D-97944 Boxberg – loaded onto truck.

Kondisi: baik (bekas), Tahun pembuatan: 1975, Fungsionalitas: berfungsi sepenuhnya, de-001 Itjdpjy R Nwysfx Aa Dei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 8.000 rpm, saluran batang: 32 mm, model controller: Traub TX8i-S, jumlah slot dalam magazin alat: 12, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Diameter Batang yang Dapat Dimasukkan: 26 / 32 mm Kecepatan Putaran Maks. Spindel Utama: 8.000 rpm Sumbu: X1 / Y1 / Z1, sumbu C terintegrasi di spindel utama Revolver: 1 Posisi alat: 12 Daya penggerak: 6,7 kW (100% duty cycle) / 10,7 kW (40% duty cycle) Torsi: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) RINCIAN MESIN Waktu hidup: 116.721 jam Jam operasi: sekitar 48.000 jam Kontrol: Traub TX8i-S Isdpsyzxp Tefx Aa Djti Dimensi & Berat Dimensi (P × L × T): sekitar 4,4 × 1,4 × 1,7 m Berat mesin: sekitar 4.000 - 4.200 kg PERLENGKAPAN Konveyor serbuk: sabuk engsel, tinggi pembuangan sekitar 950 mm

Kondisi: bekas, Tahun pembuatan: 1996, 20384e34 Itedpfx Aexbtq Nea Dji

Tahun pembuatan: 1982, Kondisi: siap digunakan (bekas), Allgemeine CNC-Schrägbettdrehmaschine Traub steht zur Verfügung. Werkzeugplätze: 12, Werkzeugaufnahme: VDI40, Drehdurchmesser: 180mm, max. Umlaufdurchmesser: 450mm, max. Drehlänge: 490mm, Stangendurchlass: 60mm, Verfahrweg X/Z: 160mm/490mm, Eilgang: 15m/min, Vorschub: 10m/min, Maschinendimensionen X/Y/Z: ca. 3100mm/2000mm/1800mm, Gewicht: ca. 4250kg, Steuerung: Traub System TX-8. Eine Besichtigung vor Ort ist möglich. Itsdpfey I Adbjx Aa Doi

Kondisi: bekas, Tahun pembuatan: 2005, drehdurchmesser-5-42-mm Itjdpfey Nd U Dex Aa Dei

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Traub automatic lathe Ijdpfx Aajwcqv Ij Doti

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin bubut otomatis spindle tunggal TRAUB A-15 dalam kondisi sempurna, siap digunakan. Isdpfxsyy Nz Re Aa Dsti Diameter pembubutan maksimum: 15 mm

Tahun pembuatan: 2022, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, TRAUB Stein-Trockensäge MULTI-STONE 520 MULTI-STONE 520 — Baujahr 2022 Bekas dari armada sewa profesional Kurt König Baumaschinen GmbH, Einbeck. Itjdpfsy A E Niox Aa Doi Kondisi & Keterangan: - Kondisi: Bekas dari penyewaan, servis rutin - Fungsi: Berfungsi penuh - Gambar produk akan menyusul — silakan hubungi kami jika ingin foto terkini - Inspeksi di 37574 Einbeck dapat diatur sesuai perjanjian Harga 3.750 EUR belum termasuk PPN | EXW Einbeck | Pengiriman atas permintaan