Beli Wmt Teiltisch Hv8 bekas (816)

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Pjdefgyicjpfx Aqvogt Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight approx. 4.45 t Pgedpfxofgyifj Aqvet Space requirement approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping is carried out vertically on the feed and discharge sides. From the K-tech 800 H, the machine is equipped as standard with an additional horizontal vise. Hydraulic saw frame lowering, material positioning, and the pusher system are CNC-controlled in coordination. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC controller enables programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper jaws" which are hydraulically operated. This ensures secure gripping and handling of materials and bundles that deviate slightly from the ideal shape. The pusher system is built separately and runs on ball-bearing linear guides, ground rack, and is powered by a frequency-driven, robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Psdpfx Aqofgyigovsgt Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space requirements: approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. Starting with the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interplay of the hydraulic saw frame downfeed, material positioning, and the pusher system is CNC controlled. The machines are equipped as standard with the environmentally friendly "B&S-Clean Cut Cutting System" with minimum quantity lubrication. This reduces cleaning time and conserves resources. CNC control A CNC controller allows programming of up to 90 cutting programs with different section lengths, quantities, and mitre cuts. The B&S pusher system, feed and positioning system, features "double-sided opening grippers" which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate slightly from the ideal shape. The pusher system is built separately and is guided by ball-bearing linear guides, ground rack, and frequency-driven robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double miter bandsaw for fast cutting with pusher system P15, option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake with large radial center positioning. Pgsdpfofg E Hmex Aqvet The work table is mounted on high-quality preloaded bearings which ensure very smooth rotation. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, features "double-sided opening grippers" which are hydraulically operated. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and runs on ball-bearing linear guides, a ground rack, and is powered by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Blade speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions L x W x H: 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance for cutting special steels. • The welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw frame, vice, feed, saw blade guides) utilize modern linear guides capable of high static and dynamic load capacity, ensuring minimal sliding friction. • Another key feature is the roller system for material positioning, hydraulically driven. These rollers move at a right angle to the material, allowing optimal clamping. • Thanks to adjustable blade height control, the operator can precisely position the band near the top edge of the material. After cutting, the blade automatically returns to its previous position. Alternatively, the ‘remain’ function can be selected to leave the blade at the lower position. During the cutting cycle, the software compares sawing load with preset values to allow the system to stop in case of irregularities. • The saw blade is cleaned by two adjustable steel brushes with hydraulic drive. • The hydraulic unit with filter and pressure gauge ensures particularly smooth operation at a constant pressure. • Precision-ground carbide inserts for saw blade clamping, complete with hardened, adjustable lateral guide rollers. The adjustable blade guide automatically moves as close as possible to the material. • The saw blade is tensioned by a hydraulic cylinder, controlled by machine software. Tension is automatically released after a preset time in idle mode or after a cutting cycle. • Automatic version with CNC control available for X-TECH 900 / 1200 models, with 500 mm feed length for high-production series. • The material is supported by a table with seven rollers. These are driven by a hydraulic orbital motor, ensuring precise placement even at maximum load. • All guided movements run on four recirculating ball guides with high capacity for static and dynamic loads; significantly reduced feed friction. Induction-hardened, ground prismatic guides. Price on request. Pgedjfg E Hpjpfx Aqvjt

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Dimensions L x W x H: 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw with dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Driven chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vises. Pgedjfg E Hzopfx Aqvot + Feed system with vertical rollers for lateral material support. + Numerically controlled band saw, which can also be operated semi-automatically, featuring the new MEP 50 control unit, developed specifically by MEP for automatic machines, based on Windows CE. + “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring the cut surface when the band lifts at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7” touchscreen display and mechanical buttons, allowing for operational control of the saw, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Kondisi: baru, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: Saw band frame, vice assembly, and base made of durable cast iron High-precision degree marking on the cast iron structure Electrical system (with fully labeled wiring and 24 V low-voltage system) Control handle IP 55 for manual cycles (where applicable) Rotating chip brush for the saw band Quick-approach closing unit with vice Precise end stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering manuals in the user’s language SHARK 281 in manual operation and SHARK 281 CCS in manual operation, but with cutting through automatic downfeed by the saw head’s own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting, (B) adjustment of cutting speed, (C) hydraulic brake with reservoir, (D) end stop for band halt. CCS is optionally available for previously delivered machines as well. Quick-adjust vice Hydraulic converter for band tension display Pgsdjfg E H Ijpfx Aqvot Electric coolant pump for cooling and lubricating the saw band and maintenance-friendly coolant tray above the machine base In versions with pneumatic vice (MA), opening and closing of the vice is done via manual valve (pedal control available as an option).

Kondisi: baru, MSS2024-001 Pedpfx Aofg E H Neqvsgt

Kondisi: baru, Cutting diameter: 330 mm Cutting range at 90 degrees, flat: 510 x 320 mm Psdpfx Aefg E Iboqvsgt Cutting range at 90 degrees, square: 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position. Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min. Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.

Kondisi: bekas, Thread diameter M3 - M12 mm Speed infinitely variable 400 rpm Torque 25 Nm Air pressure 6 - 8 bar Working range radius 1000 mm Machine weight approx. 12 kg Demonstration machine! Pneumatically driven tapping machine for M3 - M12 threads, equipped with: Pjdpfx Aqefg U Smovjgt - robust and flexible working arm - 6 quick-change chucks with slip clutch Documentation in English!! Optional: - Clamping table with T-slot clamping surface 900 x 600 mm

Kondisi: baru, Drilling capacity in steel: 30 mm Tapping capacity: M20 Throat depth: 260 mm Drilling stroke: 125 mm Spindle taper: MT 3 Spindle speeds: 80 - 1440 / 180 - 3200 rpm Gear stages: 2 Column diameter: 110 mm Table size: 500 x 365 mm Total power requirement: 0.8 / 1.4 kW Podpfx Ajfg U Tpoqvjgt Machine weight approx. 0.27 t Space requirement approx. 0.4 x 1.2 x 1.9 m Auction Autumn/Winter 2003 Powerful, precise column-type drilling machine with a wide range of applications. The drill table is adjustable via rack and pinion as well as worm gear, and can be swiveled around the column. Forward/reverse switch. Emergency stop button. Full motor protection. Star handle. Digital speed display as standard.

Kondisi: baru, Drilling capacity in steel (diameter): 50 mm Drilling capacity in cast iron (diameter): 60 mm Thread cutting capacity: M36 Throat depth: 400 mm Drilling stroke: 230 mm Spindle taper: MT 4 Spindle feed range: 0.1-0.2-0.3-0.4-0.5-0.6 mm/rev Spindle speeds: 54 - 1032 rpm Gear stages: 12 steps Column diameter: 200 mm Table size: 550 x 550 mm Total power requirement: 3.0 kW Machine weight approx.: 0.72 t Required space approx.: 0.6 x 1.2 x 2.6 m Equipment: - Gears made of hardened and ground steel - Front-facing speed selection levers - Gear lubrication via automatic oil pump - Integrated coolant system - Machine lamp Psdpjfg U Ttsfx Aqvogt - Rotating and tilting table - Automatic feed with electromagnetic clutch - Handwheel for precise manual feed - Automatic tool ejector - Electrical controls integrated into the drill head - Emergency stop push button - Switch for clockwise/counterclockwise rotation - Height-adjustable chip guard with microswitch - CE marking

Kondisi: bekas, Saw blade diameter: 350 mm Cutting range at 90 degrees (round): 120 mm Cutting range at 90 degrees (square): 105 mm Cutting range at 90 degrees (flat): 180 x 70 mm Cutting range at 45 degrees (round): 120 mm Cutting range at 45 degrees (square): 100 mm Cutting range at 45 degrees (rectangular): 135 x 60 mm Saw blade speeds: 1,700 / 3,400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade. Pedpfx Aqofc T Ugjvsgt The machine is suitable for miter cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis, it is possible to carry out sawing operations with the head tilted from 0° up to 45° to the left.

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right Pgsdpfofd Abasx Aqvjt - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: bekas, Roller diameter 500 mm Pedpfxequx Sye Aqvogt Throat depth 490 mm Workpiece height 220 mm Table size 600 x 600 mm Saw blade length 3350 mm Speed 12 - 1900 m/min Total power requirement kW Machine weight approx. 0.4 t Space requirements approx. 1.2 x 0.8 x 1.95 m Bandsaw with - Swiveling table - Foot switch - Machine lamp - IDEAL welding unit

Kondisi: baru, Load capacity: 1,500 kg Fork length: 1,150 mm Lifting height: 4,150 mm Overall height: 2,450 mm Machine weight (approx.): 0.82 t Pedpfx Aoqux S Doqvogt Dimensions (L x W x H): 1.72 x 0.8 x 2.65 m

Kondisi: baru, Lebar pita 100 mm Panjang pita 2000 mm Kecepatan pita m/detik Diameter pipa 16,5 - 76 mm Sudut dapat disesuaikan dari - hingga 0 - 65 derajat Tegangan sambungan 400 V Total kebutuhan daya 2,2 kW Berat mesin sekitar 0,17 ton Ruang yang dibutuhkan sekitar 1,3 x 0,7 x 1,1 m Mesin penggerinda pipa dengan 10 buah rol penggerinda: 16,5 - 18,5 - 22,5 - 29,5 - 35 - 39,5 - 45,5 - 9,5 - 57,5 - 73,5 mm Pgedpfx Aqjt Eaf Usvst Rentang penjepitan pipa 90 mm Dokumentasi (Bahasa Inggris)

Kondisi: bekas, Tahun pembuatan: 1986, blechbiegemaschine-3walzen-2040mm-40mm Pgsdpfxoy Ezzyj Aqvet

Kondisi: bekas, Tahun pembuatan: 2002, x-weg-600-mm Podpfx Aoy N D Idoqvsgt

Kondisi: bekas, bohrleistung-stahl-spezifikation Pgsdpfsy N D Iksx Aqvst

Kondisi: bekas, Tahun pembuatan: 2005, de2specs-001 Pgsdpfxoy N D Nbj Aqvet

Kondisi: bekas, Tahun pembuatan: 1989, de-001 Pjdpfx Ajy D A E Deqvjgt

Kondisi: baru, Welding current 5 - 160 A Input voltage 230 V Weight 7.9 kg Dimensions LxWxH 310 x 140 x 230 mm ESAB Inverter TIG Welding Machine Rogue ET 180i CE TIG DC Outstanding high-frequency TIG ignition ensures flawless arc starts as well as consistent and stable arc characteristics. User-friendly operation—the welding parameters are simple and intuitive to set. Robust design—IP23S-rated housing for use in production facilities and construction sites. Pjdpfx Aevkiwboqvjgt Extensive TIG functions for optimal process control for any application and a pulse function up to 500 Hz for ideal heat input control. A PFC module ensures a stable arc and resistance to mains voltage fluctuations—even when working with extension cords up to 100 meters (PRO version only). Optionally, the welding current can be adjusted via the TIG torch, foot pedal, or remote hand controller. Technical Data: Primary voltage, single-phase 230 VAC ±15%, 1 Ph, 50/60 Hz Maximum welding current 180 A Rated apparent power 8 kVA Energy-saving mode 30 W Open-circuit voltage 63 V DC MMA (manual metal arc / stick) - max. load at 20% duty cycle 170 A/26.8 V at 60% duty cycle 97 A/23.9 V at 100% duty cycle 75 A/23.0 V TIG - max. load at 25% duty cycle 180 A/17.2 V at 60% duty cycle 116 A/14.6 V at 100% duty cycle 90 A/13.6 V Current range 10-180 A Operating temperature -10 to +40°C Enclosure protection class IP23S Certification mark CE Dimensions, L x W x H 403 x 153 x 264 mm Weight 8.7 kg Scope of supply: Shoulder strap, 4 m TIG torch type SR-B 26, one consumable set including 2.4 mm tungsten electrode, and 3 m workpiece cable with clamp

Kondisi: baru, Welding current 10 - 180 A No-load voltage V Input voltage 230 V Weight 6.8 kg Dimensions (LxWxH) 403 x 153 x 264 mm Electrode welding machine with accessories: Electrode cable Pgodpfjvkixfsx Aqvet Ground cable 4 m Shoulder strap

Kondisi: baru, Clamping range of the chuck: 80 - 280 mm Height: 67.5 mm Through-hole: 100 mm Outer diameter of chuck: 300 mm Outer diameter of clamping lever: 480 mm Pgjdpfofv Awpsx Aqvst Weight: 13 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers enable rapid workpiece changes. • Low weight and flat design ensure minimal shift in center of gravity. The D-D quick-change chuck enables fast product changeovers and is ideal for frequent component changes. No separate quick-release wrench is required, as the levers are integrated into the quick-change chuck.