Beli Mvd Pers Pembengkokan bekas (20.834)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1977, Perlengkapan: 1 unit kabin peredam suara BIHLER 1 unit penarik penjepit kanan Gjdpfxsfzr Aqe Aclska 1 unit mesin press eksentrik 70 kN 4 unit agregat seluncur normal 1 unit agregat seluncur sempit Ruang kerja: Diameter kawat: 0,5 - 3,5 mm Lebar pita: hingga 32 mm Panjang penarikan: hingga 170 mm Kapasitas: hingga 250/min.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1967, de-001 Gkedpfx Acjl D N Hvjloa

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Equipment: 1 right-hand gripper feed 3 pressing modules at 180 kN each = total 540 kN 4 standard slide units 1 narrow slide unit Working range: Wire diameter range: up to 10 mm Strip width: up to 100 mm Gkodpfoma S Nrsx Aclsa Feed length: up to 250 mm Performance: up to 135 cycles/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, Equipment: 1 BIHLER P-CNC 200 Control System 1 BIHLER Soundproof Enclosure 2 Right-Side Gripper Feed Units 1 Left-Side Gripper Feed Unit 4 Wide Slide Units (Welding Press Slides) 1 BIHLER B 1000 Welding Unit Working Range: Wire diameter range: 0.5 – 3.0 mm Strip width: max. 40 mm Feed length: max. 240 mm Godpfjwxarqox Acloka Output: max. 400 cycles/min

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Equipment: - 1 right-side gripper feed - 1 double-point eccentric press, 90 kN Gjdpotqf Iqefx Acleka - 3 standard slide units - 1 narrow slide unit - 1 control shaft Working range: Wire diameter range: 0.5 - 4.0 mm Strip width: up to 60 mm Feed length: up to 270 mm Performance: up to 350 cycles/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Equipment: - 1 gripper feed unit, right side - 1 eccentric press, 70 kN - 3 narrow slide units - 1 camshaft Working Range: Wire diameter range: 0.5 - 3.0 mm Strip width: max. 40 mm Gkedpfx Acstmtzkelja Feed length: max. 240 mm Capacity: up to 400 cycles/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Load capacity: max. 40 kg Reel plate diameter: 650 mm Coil outer diameter: max. 600 mm Gsdpji T Ir Aofx Acloka Coil inner diameter: 170 - 310 mm Coil width: max. 200 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit. Gkjdpfxjr D N Eqj Acloa

Kondisi: bekas, Embossing Stamping Press - Kniehebelprägepresse Krause KHP Stamping area: 350 x 400 mm Very good condition Godpfovi Hh Iex Acljka Online video inspection...

Kondisi: bekas, Tahun pembuatan: 1998, nomor mesin/kendaraan: 101486, Vertical press delivery / Vertical Press Delivery Heidelberg VSA-66.D+MKEYear 1998 - Serial-No. 101486/98-256505 Working width max. 660 mm Marking device Online video inspection via Skype video We would be very pleased to welcome you for a visit – more machines in stock Available immediately – Can be inspected In stock in Emskirchen / Nuremberg – Testing possible Gkjdpfxjh Ayfwj Acloa

Kondisi: bekas, nomor mesin/kendaraan: 24118, Kniehebelprägepresse – Krause KHP Prägefläche / Stempelgröße: 350 x 400 mm Gjdout Tkgjpfx Acloka Sehr guter Zustand / Excellent condition Online-Video-Inspektion via Skype-Video Wir würden uns sehr über Ihren Besuch freuen – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen / Nürnberg – Vorführung möglich

Kondisi: bekas, Tahun pembuatan: 1988, nomor mesin/kendaraan: 26184, Pressstation / Press Station Stahl PS 46, Baujahr 1988 - Seriennummer 26184 Arbeitsbreite max. 460 mm Online-Videoinspektion per Skype-Video möglich Wir freuen uns über Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Gkodpfxeh Axlho Aclsa Lagerort: Emskirchen / Nürnberg – Test vor Ort möglich

Kondisi: bekas, Tahun pembuatan: 2010, nomor mesin/kendaraan: 1,04197E+11, Vertical press delivery MBO FA 82-ME Navigator Year of manufacture: 2010 — Serial No. 104197100101 - Maximum working width: 820 mm Gksdpfjt E Ntusx Aclea - Equipped with integrated press rollers - Includes ME marking device - Navigator control system - Online video inspection available via Skype We would be pleased to arrange a visit for you — additional machines in stock. Immediately available — inspection possible Located in Emskirchen / Nuremberg — machine can be tested

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: 79719, Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.1, Baujahr 1996 – Serien-Nr. 79719/96-239513 Arbeitsbreite max. 660 mm / Maximum working width: 660 mm Markiereinrichtung / Marking device Gkodpfelg Aadjx Aclsa Online-Video-Inspektion per Skype-Video möglich Wir würden uns sehr über Ihren Besuch freuen – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen / Nürnberg – Vorführung möglich

Kondisi: sangat baik (bekas), hess-korpuspresse-export Gjdjxgvwpspfx Aclska

Kondisi: baru, Tahun pembuatan: 2026, Mandrel-free tube bending machine RB 54 – NC-controlled, with large program memory Item number: 4300054 NC controller for setting the bending angle Up to 50 programs can be stored High-quality, robust construction Quick tool change Fully motorized drive Automatic return to home position TECHNICAL DATA General Information Max. bending radius: 162 mm Max. bending angle: 210° Bending speed: 2 rpm Torque: 2341 Nm Dimensions and Weights Length (approx.): 600 mm Width/Depth (approx.): 220 mm Height (approx.): 470 mm Net weight (approx.): 107 kg Bending Performance Bending capacity, tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity, tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm Gjdpfx Acjvk Scgoloka Bending capacity, tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm Electrical Data Drive motor output: 1.1 kW Connection voltage: 400 V Mains frequency: 50 Hz Location: ex stock - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Gkodow Sgnkspfx Aclsa Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, en-1 Gkjdpfx Ajb Eln Djclea

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Gkodpfoiidm Nsx Acloa Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tekanan 100 ton Langkah 300 mm Luas meja 1070 x 260 mm Jarak antara penopang 1070 mm Kecepatan mendekat 8,0 mm/detik Kecepatan kerja 5,0 mm/detik Gkodpfexabcwsx Aclja Kecepatan mundur 10,0 mm/detik Kapasitas oli 90,0 liter Daya motor 5,5 kW Berat mesin sekitar 1500 kg Ukuran ruang yang dibutuhkan sekitar 2050 x 1000 x 2200 mm Perlengkapan: - mesin pres bengkel elektro-hidraulik yang kuat, dengan silinder tetap - Sangat cocok untuk meluruskan poros, batang, dll., tetapi juga untuk memasukkan dan mengeluarkan baut, bantalan, selongsong, dll. - konstruksi baja las yang kuat untuk menahan beban tinggi - Penyesuaian ketinggian meja melalui batang piston * termasuk rantai baja bundar dan 2x baut pengunci * Batang piston dengan dudukan metrik - 1 set blok-V - Manometer untuk indikator tekanan - Pengoperasian manual yang sederhana dengan: * 1x kecepatan mendekat * 1x kecepatan kerja * 1x kecepatan mundur - Piston dapat dihentikan pada posisi apa pun - Tangki hidraulik yang terpasang secara permanen di samping - Buku panduan

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force 500 t Clear width 750 mm Stroke 120 mm Total power requirement 57 kW Machine weight approx. 16 t Space requirement approx. ... m Gksdst Hwpyepfx Aclja HYDRAP CNC press control and Siemens Simatic S5 control, continuously adjustable workpiece transport unit around the right column, table size 400 x 740 mm, max. installation height 200 mm

Kondisi: bekas, Tahun pembuatan: 1987, Pressure 125 t Upright distance 1050 mm Stroke 250 mm Total power requirement 40 kW Machine weight approx. 8.5 t Gkedpfx Acot Hwuiolja Space requirement approx. m DUNKES CNC control system type CNC 1000, controlled drawing cushion, 4-fold prism guide, SICK light curtain, contact pressure gauge, Cutting impact damping

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force: 3 t Reach: 0 mm Stroke: 200 mm Gkedpet Hw Amjfx Aclsa Total power requirement: 15 kW Machine weight approx.: 4 t Space requirement approx.: m JENNY – Switzerland, automatic double-column straightening press Type RZ-205/3-600, Year of manufacture 1990, Serial no. 86 596 Upper ram pressing force 3 t Ram stroke approx. 200 mm Maximum installation height: 500 mm Maximum clamping length of workpiece: 600 mm Height of center above table approx.: 210 mm Ram speed up: 0.17 mm/sec Ram speed down: 0.02 – 0.17 mm/sec Pump drive: 15 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight approx.: 4,000 kg Accessories / Special equipment: Machine without automatic workpiece feed, the parts (shaft-shaped) are inserted manually, in front of the working area there is a Plexiglas sliding cover, manually operated Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but connection options for up to 7 measuring points. These are longitudinally adjustable on the lower press table over a range of approx. 500 mm, the straightening punch is adjustable on the upper ram in a prism guide 2 tailstocks adjustable on the press table up to a maximum clamping length of 600 mm, left side motor-driven with clamping quill, right side with indexing disc Workpiece rotation via stepper motor from 10 to 100 rpm 2 workpiece supports (prisms) left and right, for supporting the workpiece The workpiece is measured at predetermined points and straightened accordingly, the straightening process is monitored and controlled with the measuring device Straightening stroke control for preset ram stroke Left tailstock motorized Original JENNY cycle control (FMS) in separate control cabinet with monitor and keyboard, parameter input,

Kondisi: bekas, Tahun pembuatan: 1977, Hydraulic C-Frame Drawing Press FRITZ MÜLLER CEZ 160.5.8 Pressing force: 160 t Throat depth: 360 mm Stroke: 560 mm Total power requirement: 33 kW Machine weight: approx. 6,000 kg Space requirement: approx. 2,000 x 2,400 x 3,650 mm Manufacturer: FRITZ MÜLLER Model: CEZ 160.5.8 Year of manufacture: 1977 / 2004 (retrofitted) Serial no.: 856597 SPECIFICATIONS: • Upper ram pressing force: 160 t Gksdpfx Acet Hw E Isloa • Return pressing force: 16 t • Drawing cushion pressing force: approx. 40 t • Ram area: approx. 800 x 600 mm • Table size: approx. 900 x 720 mm • Table bore: 160 mm • Maximum daylight opening: 700 mm • Throat depth: 360 mm • Table height above floor: 900 mm • Ram bore for tool mounting: 50 mm • Upper ram stroke: approx. 560 mm • Drawing cushion stroke: approx. 200 mm • Drive power: approx. 30/33 kW - 400 V – 50 Hz • Weight: approx. 6,000 kg • Machine dimensions (L x W x H): 2,000 x 2,400 x 3,650 mm Equipment / Special features: • Hydraulic drawing cushion integrated in the table with adjustable cam rail for stroke length • Side-mounted cam rail for upper ram stroke adjustment, including switches for rapid traverse, working stroke, and return • Two-hand control mounted at the front of the table, foot switch, etc. • Built-in filter pump, pressure display via manometer above the cylinder • Integrated cut shock absorber, piece counter, etc. • Freestanding control cabinet completely renewed in 2004 at the manufacturer's factory, with timer for pressing time and monitoring lights • Overhauled/modernized hydraulics with integrated oil cooler Condition: good – will be available for powered demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. A further selection of hydraulic presses is always available from our stock – please contact us for current offers.

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force: 10 t Throat width: 500 mm Stroke: 200 mm Total power requirement: 10 kW Machine weight: approx. 4,500 kg Space requirement: approx. m M A E Automatic double-column straightening press with microprocessor control Model: ADS F 10 RH Year of construction: 1984 Serial No.: 5 002 84 00 Straightening force - Upper ram pressing capacity: 10 t Return force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Distance between table and ram (max.): 160 mm Workpiece clamping length, approx.: 600 mm Max. installation height: 600 mm Pump drive: 5.5 kW Total drive approx.: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special Features: • FEINPRÜF measuring and sequence control MILLITRON P 2070 with display screen for fully automatic straightening process: load workpiece, measure the “bend,” position the workpiece at “maximum bend at the top,” straightening process, control measurement (and if necessary re-straightening), eject workpiece. Gedpfet Hwwdsx Aclska • Machine equipped with a short workpiece feed using a lift beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points for one workpiece; 2 workpiece supports on the left and right, as well as 1 pneumatically adjustable straightening anvil. • The straightening punches are individually pneumatically controlled. • Gripper for scrap parts that are no longer straightenable, mounted at the rear. Condition: good to very good – will be available for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Further straightening presses in stock – please contact us for details.