Beli Stigal Dynamic bekas (951)

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Iedpfxsxy Tmno Akpoth Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, jarak tempuh: 21.681 km, daya: 110 kW (149,56 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, pendaftaran pertama: 01/2025, kelas emisi: Euro 6, warna: hitam, jumlah tempat duduk: 6, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jumlah sumbu: 3, daya motor spindle: 5.000 W, kecepatan spindel (maks.): 24.000 rpm, This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It offers continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine features an automatic 4-position tool changer and a dual "0" reference laser for precise positioning. If you are looking for high-quality CNC machining capability, you should consider the VITAP Point K2 TOP 2.0 we have for sale. Contact us for further details. • Condition: not refurbished, without warranty • CE compliant Machining and Axes: • Continuous machining, underside processing, automatic return of the workpiece to the operator • 3 controlled axes: • X-axis: uninterrupted workpiece transport via DDT (Dual Dynamic Transport System) with brushless motor • Y-axis: travel path of the drill head • Z-axis: drilling • No length limitation for workpieces • Rear workpiece ejection Itjdpjy Hrdzofx Akpsh Referencing and Positioning: • Dual "0" reference laser (transmitter/receiver) for detection of start/end; compensates for dark-edged materials • Programmable adjustment for underside drilling to ensure flushness on vertical/horizontal workpieces • Side stops with rollers (fixed and movable), mechanical digital display, automatic alignment to 0-stop, trimming up to 3 mm on the 0-line • Constant side clamping device for precise positioning on the 0-line • Adjustable zero point for 4-sided formatting Tools and Heads: • Automatic 4-position tool changer • 12 independent vertical spindles • Horizontal spindles: • X-axis: (2+2) • Y-axis: (2+2) • 1 saw (Ø 100 mm) • 5 kW electrospindle, ISO 30 taper, 12,000–24,000 rpm • Spindle speed (additional info): 3,500 rpm • Max. vertical tool diameter: 35 mm • Max. horizontal tool diameter: 12 mm • Maximum vertical drilling depth: 45 mm • Maximum horizontal drilling depth (X/Y): 30 mm Capacity: • Max. workpiece weight: 80 kg • Max. workpiece size: X unlimited, Y 1200 mm, Z 50 mm • Min. workpiece size: X 270 mm, Y 185 mm (at 70°), Z 4 mm • Feed rate: 25 m/min Control and Machine Software: • 19” 5/4 TFT LCD screen • Industrial PC • WSC user interface with parts list, parametric tool creation and parametric setup • CAD TPA EDI32 graphic programming, basic version • USB port • Save all files • Macro programming • Import of DXF files Connection for Utilities and Extraction: • Dust extraction air volume: 2000 m³/h • Extraction velocity: 30 m/s • Extraction ports: 2x Ø 100 mm + 1x Ø 50 mm • Motor: 1.7 kW • Compressed air: 7 bar • Max. air consumption: 60 Nl/min • CE standards Additional Equipment: • Office software – license

Kondisi: baru, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 1.500 mm, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, posisi kepala milling: Universal-Diagonal-Fräskopf, kecepatan spindel (maks.): 6.000 rpm, lebar meja: 1.100 mm, beban meja: 10.000 kg, panjang meja: 3.100 mm, berat keseluruhan: 27.000 kg, torsi: 1.178 Nm, daya motor spindle: 53 W, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, LAGUN BM 3 C Bed Type Machining Centre with Integrated Rotary Table – Available for Immediate Delivery The LAGUN BM 3 C is a highly robust bed type machining centre featuring an integrated rotary table, engineered for heavy-duty and precise metal cutting operations. Ideally suited for both single-part manufacturing and series production where maximum rigidity, accuracy and reliability are required – all without the need for costly foundation work. Your Benefits at a Glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Leasing / financing options available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Why Choose LAGUN: LAGUN is among Spain’s leading machine tool manufacturers (MAHER HOLDING), recognized for robust construction, dynamic performance, and decades of experience in the bed-type milling machine sector. These machines impress with outstanding reliability, ease of maintenance, and economic operation. Technical Specifications: Control: HEIDENHAIN TNC 7 CNC path control HEIDENHAIN 19" TFT display HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Integrated Rotary Table: Ø 1,100 mm Coolant System: Internal coolant supply (IKZ) 36 bar Tool Changer: 40-position chain magazine with double gripper Chip Management: Dual hinged belt conveyors (front and rear) Enclosure: Full perimetric enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Iedpfx Aksm Tv Iiopoth Your Advantages with JMT: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be pleased to advise you and provide a personalised quotation.

Kondisi: baru, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 3.000 mm, posisi kepala milling: Universal-Diagonal-Fräskopf, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, kecepatan pemakanan sumbu X: 20.000 m/menit, laju pemakanan gandar Y: 20.000 m/menit, laju pemakanan sumbu Z: 20.000 m/menit, kecepatan spindel (maks.): 6.000 rpm, rentang pivot: 1 °, panjang meja: 9.000 mm, lebar meja: 2.000 mm, torsi: 1.288 Nm, pasokan pendingin: 36 batang, daya motor spindle: 40 W, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, LAGUN ML 8 Travelling Column Milling Machine Ijdpoh Ekucefx Akpeth The LAGUN ML 8 is a highly dynamic travelling column milling machine designed for precise machining of large and complex workpieces. Ideally suited for both single-part production and series manufacturing, the ML 8 meets the highest standards of accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Leasing / financing available ✔ Maximum flexibility thanks to the travelling column design ✔ 24 months warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), renowned for robust construction, high dynamics, and decades of experience in the manufacture of milling machines. These machines stand out for their reliability, ease of maintenance, and economical operation. Technical specifications: Control system: HEIDENHAIN TNC 7 digital path control HEIDENHAIN 19" TFT display HEIDENHAIN motors, measurement systems and electronic handwheel HR-510 Tool changer: Automatic tool changer for 60 tools Chip disposal: Hinged belt conveyor Enclosure: Three-sided perimeter enclosure Accuracies: Positioning accuracy: ±0.050 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ Local technical support and service ✔ Fast spare part supply ✔ Training and operator instruction included ✔ Reference machines available in Germany Contact us – we are happy to advise you and prepare a customised offer.

Kondisi: baru, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.000 mm, panjang meja: 3.000 mm, lebar meja: 1.700 mm, kecepatan spindel (maks.): 6.000 rpm, gerak cepat sumbu X: 24.000 m/menit, pergeseran cepat sumbu Y: 24.000 m/menit, pergerakan cepat sumbu Z: 24.000 m/menit, beban meja: 10.000 kg, posisi kepala milling: Vertikal, berat benda kerja (maks.): 10.000 kg, torsi: 1.392 Nm, berat keseluruhan: 30.000 kg, hidung spindel: SK 50 - DIN 69871/A, daya motor spindle: 53 W, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, en-STARVISION DX 3220 Gantry Milling Machine – available at short notice The STARVISION DX 3220 is a high-precision gantry milling machine designed for machining large and heavy workpieces. Itjdpfxjhy Avps Akpsh Ideal for mold making, mechanical engineering, contract manufacturing, and demanding machining applications where high standards of stability, dynamics, and accuracy are essential. Your Benefits at a Glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / leasing options available ✔ High rigidity for heavy-duty machining ✔ 24-month warranty Why STARVISION: STARVISION stands for modern gantry milling machines offering high precision and efficient processing. The rigid gantry construction, powerful drives, and high-quality components make this machine ideal for challenging applications. Technical Specifications: Control: HEIDENHAIN TNC 7 CNC path control HEIDENHAIN TFT display 19" HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (ICS) 70 bar Tool Changer: 60-position chain magazine with double gripper Chip Conveyance: Hinged belt chip conveyor (transverse) Twin-screw conveyor (longitudinal) Prepared for: Preparation for 4th axis (rotary table) Enclosure: Full enclosure, fully enclosed at the top Accuracy: Positioning accuracy: ± 0.035 mm Repeatability: ± 0.028 mm Your Advantages as a JMT Customer: ✔ Official sales partner in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included Contact us – we are happy to advise you and provide a tailored offer.

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 500 mm, lebar penggilingan: 300 mm, tinggi total: 585 mm, panjang total: 600 mm, panjang pemakanan sumbu X: 630 mm, panjang umpan sumbu Z: 360 mm, berat benda kerja (maks.): 300 kg, tinggi penggerindaan: 400 mm, diameter roda gerinda: 355 mm, panjang meja: 600 mm, beban meja: 300 kg, lebar meja: 300 mm, lebar roda gerinda: 50 mm, kecepatan spindel (maks.): 1.800 rpm, kecepatan spindel (min.): 1.800 rpm, berat keseluruhan: 3.600 kg, daya motor spindle penggiling: 7.450 W, daya: 11,93 kW (16,22 hp), kebutuhan tinggi: 2.900 mm, persyaratan ruang panjang: 3.100 mm, lebar yang dibutuhkan: 3.300 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Opsi mesin: Sistem kontrol Mitsubishi Pendinginan dengan filtrasi kertas otomatis dan pemisahan magnetik, volume 160 liter Flensa cadangan 1 buah Pengontrol meja magnetik dengan fungsi demagnetisasi Penyeimbangan dinamis roda gerinda Pendinginan spindle SPINFLO Penghisap kabut oli Transformator Dresser rotari Iedpfxjy Rln Us Akpsth Dresser standar Pengontrol manual Pencahayaan LED area kerja Lampu sinyal peringatan

Kondisi: bekas, jarak tempuh: 66.653 km, daya: 140 kW (190,35 hp), pendaftaran pertama: 02/2021, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 5.932 mm, lebar total: 2.020 mm, tinggi total: 2.620 mm, panjang ruang muatan: 3.272 mm, Tahun pembuatan: 2021, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, daya: 45 kW (61,18 hp), berat keseluruhan: 4.700 kg, warna: abu-abu, Maximum chipping height: mm 200 Infeed width: mm 650 Feed rollers: pcs. 3 Rotor diameter: mm 600 Chipping length approx.: mm 20-30 Output capacity: 18 – 22 stacked m³/h wood chips Chipping knives: pcs. 2 Feed motors: kW 2 x 3 Weight approx. net: kg 4700 Infeed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearing: oversized roller bearings Bearing housing: steel, flange housing Ijdoynzg Hjpfx Akpoth Feed rollers: steel, special toothed Chip discharge: below the machine Machine grate: (screen) for secondary comminution of oversized chips Drive pulley: matched to main motor N = 1500 rpm Hydraulic system: comprising: hydraulic pump, membrane accumulator, cylinder, pressure gauge, control valves for raising the upper feed roller Feed: via 2 geared motors, make NORD GETRIEBE

Kondisi: bekas, Tahun pembuatan: 2017, de230614001 Itedpfx Akey Um Rrepoh

Kondisi: bekas, jarak tempuh: 10 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 06/2026, jenis bahan bakar: diesel, warna: abu-abu, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 2, panjang total: 5.986 mm, lebar total: 2.040 mm, tinggi total: 2.355 mm, panjang ruang muatan: 3.201 mm, lebar ruang muat: 1.832 mm, tinggi ruang muatan: 1.626 mm, Perlengkapan: ABS, kunci sentral, pemanas parkir, pendingin udara, penggerak semua roda, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 10 km, daya: 130 kW (176,75 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, pendaftaran pertama: 06/2026, inspeksi berikutnya (TÜV): 06/2028, kelas emisi: Euro 6, warna: merah, jumlah tempat duduk: 8, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, jarak tempuh: 32.885 km, daya: 130 kW (176,75 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, pendaftaran pertama: 06/2025, panjang ruang muatan: 3.201 mm, lebar ruang muat: 1.832 mm, tinggi ruang muatan: 1.726 mm, kelas emisi: Euro 6, warna: abu-abu, jumlah tempat duduk: 8, panjang total: 5.986 mm, lebar total: 2.040 mm, tinggi total: 2.355 mm, Perlengkapan: ABS, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 10 km, daya: 130 kW (176,75 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, pendaftaran pertama: 03/2026, kelas emisi: Euro 6, warna: merah, jumlah tempat duduk: 8, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, jarak tempuh: 28.851 km, daya: 130 kW (176,75 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: otomatis, pendaftaran pertama: 06/2025, panjang ruang muatan: 3.201 mm, lebar ruang muat: 1.832 mm, tinggi ruang muatan: 1.726 mm, kelas emisi: Euro 6, warna: hitam, jumlah tempat duduk: 8, panjang total: 5.986 mm, lebar total: 2.040 mm, tinggi total: 2.355 mm, Perlengkapan: ABS, kunci sentral, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 10 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 06/2026, jenis bahan bakar: diesel, warna: abu-abu, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 5, panjang total: 5.986 mm, lebar total: 2.040 mm, tinggi total: 2.355 mm, panjang ruang muatan: 2.250 mm, lebar ruang muat: 1.832 mm, tinggi ruang muatan: 1.726 mm, Perlengkapan: ABS, kunci sentral, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: baru, Tahun pembuatan: 2025, Konveyor sabuk IBS dirancang untuk transportasi beton, batu, kerikil, dan material curah lainnya secara efisien, andal, dan berkelanjutan pada kondisi kerja yang berat. Berkat konstruksi yang kokoh, komponen berkualitas tinggi, dan desain modular, konveyor ini menawarkan masa pakai yang lama, perawatan mudah, serta fleksibilitas operasional yang tinggi. Struktur terbuat dari baja bermutu tinggi, sementara semua bagiannya dilapisi powder coating, menjamin ketahanan tinggi terhadap korosi dan cuaca. Konveyor diproduksi dalam panjang standar 5 m, 8 m, dan 11 m. Lebar sabuk standar adalah 800 mm, namun lebar dan panjang lain tersedia sesuai permintaan khusus pelanggan. Kecepatan sabuk dapat tetap (fixed) atau opsional dapat diatur melalui sistem pengatur kecepatan. Selain itu, konveyor dapat dilengkapi dengan pipa suplai air, sehingga air bisa diberikan langsung di titik keluaran konveyor, fitur yang sangat berguna saat penanganan beton. Itsdszcwvmspfx Akpoh Konveyor tersedia dalam tiga versi: 1. Konveyor Ketinggian dan Sudut Tetap – model dasar yang dirancang untuk operasi jangka panjang di satu lokasi. Konstruksinya memungkinkan penambahan peralatan tambahan di kemudian hari, sehingga dapat diubah menjadi salah satu versi mobile atau adjustable. 2. Konveyor Ketinggian dan Sudut Dapat Disetel – solusi mobile sepenuhnya yang memungkinkan penyesuaian cepat dan mudah terhadap ketinggian maupun sudut konveyor. Basis modular memungkinkan pemindahan secara mudah tanpa kebutuhan pemasangan permanen ke tanah. 3. Konveyor Rotasi Otomatis – model yang dilengkapi sistem rotasi otomatis sehingga memungkinkan perubahan posisi outlet material secara cepat tanpa menghentikan proses produksi. Ideal untuk lokasi konstruksi dinamis dan operasi yang fleksibel.

Kondisi: bekas, jarak tempuh: 33.064 km, daya: 96 kW (130,52 hp), pendaftaran pertama: 03/2021, jenis bahan bakar: diesel, berat keseluruhan: 3.400 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 4.972 mm, lebar total: 2.032 mm, tinggi total: 1.982 mm, panjang ruang muatan: 2.411 mm, Tahun pembuatan: 2021, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, panjang penggilingan: 1.500 mm, lebar penggilingan: 900 mm, diameter roda gerinda: 500 mm, panjang meja: 1.500 mm, lebar meja: 740 mm, lebar roda gerinda: 100 mm, CNC surface grinding machine Machine type: Elb Schliff SWDE 012 NPC-K Year of manufacture: 1989 TECHNICAL DATA: Max. grinding length: 1,500 mm Max. grinding width: 900 mm Max. working height with new grinding wheel: 800 mm Max. working height with worn wheel: 880 mm Max. workpiece weight (static): 1,000 kg Max. table load (dynamic): 1,500 kg/m Itedpfx Aowzlkqskpoh Grinding wheel diameter: 500 mm Grinding wheel width: 100 mm Table size: 1,500 x 740 mm Features: Paper strip filter Wet grinding unit Electromechanical straight dressing device Cross clamping Grinding spindle mount: Taper 75 Magnetic chuck: 1,500 x 900 mm No rotary table

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, AXILE G8 – High-Performance 5-Axis Machining Center for Maximum Precision The AXILE G8 belongs to the top class of modern 5-axis machining centers and is specifically engineered for demanding precision machining tasks. Its integrated gantry design, high dynamic rigidity, and intelligent automation options make this machine ideal for tool and mold making, aerospace, medical technology, as well as complex single part and small batch production. Technical Highlights • 5-axis gantry construction for maximum stability and minimal vibration • High-dynamic linear drives / precision ball screw drives (depending on the configuration) • Robust spindle (18,000–20,000 rpm, HSK-A63) with high power density • Swivel/rotary table with direct drive, ideal for simultaneous 5-axis machining • Large working area for complex workpieces • Tool magazine with 40–120 pockets (depending on version) • Available with Siemens or Heidenhain controls (depending on version), ergonomic and user-friendly • Rigid portal construction for optimal thermal stability and long-lasting precision Typical Technical Data (model-dependent) • X-axis: approx. 670 mm • Y-axis: approx. 820 mm • Z-axis: approx. 600 mm • Table diameter: approx. 600 mm • Table load capacity: up to 500 kg • Spindle speed: 18,000 – 20,000 rpm • Tool holder: HSK-A63 • Magazine capacity: 40 / 60 / 120 tools • Control: Heidenhain TNC 640 or Siemens 840D sl (Values may vary depending on year of manufacture and configuration.) Equipment & Options • Full simultaneous 5-axis machining • Through-spindle coolant (TSC) • Automatic tool measurement and breakage detection • Renishaw touch probe • High-pressure cooling system • Chip conveyor and internal washdown • Modern safety enclosure & automation interfaces Applications The AXILE G8 is ideal for: • Tool & mold making • Aerospace • Medical technology • Automotive prototyping • Mechanical engineering & precision parts manufacturing Description This 5-axis machining center impresses with its combination of dynamics, rigidity, and high-precision machining. Thanks to the gantry structure, the machine remains extremely stable even during long operating times and high feed rates. Intelligent thermal management ensures consistent accuracy and the modern control system enables efficient programming and quick setup times. Itodpfoxxh A Iox Akpoh The AXILE G8 is the perfect solution for companies seeking a reliable, high-performance, and future-proof 5-axis machine. Currently available from stock with Siemens and Heidenhain control, also with a 600mm table diameter.

Kondisi: baru, TEST DE TURBOCOMPRESOR TURBO-BOOST-TEST El banco de pruebas de sobrealimentación TURBO-BOOST-TEST permite la calibración profesional y evaluación del rendimiento de turbocompresores. Este banco de pruebas es adecuado para la afinación (tuning) y el ajuste de turbinas, en la fabricación de turbinas híbridas y para comprobar los cambios en el rendimiento de la turbina tras modificaciones. Nuestros bancos de pruebas son sistemas avanzados para la optimización y verificación de turbocompresores en modo dinámico. Permiten ensayar el turbocompresor bajo condiciones prácticamente reales de funcionamiento, garantizando un control total del proceso y la detección de posibles fallos, incluyendo fugas de aceite. CARACTERÍSTICAS DESTACADAS • Pruebas finales completas y ajuste de turbocompresores automotrices para motores de hasta 3 litros • Pruebas dinámicas de turbocompresores • Instalación sobre superficies estándar de fijación • Rodaje y comprobación de fugas de aceite • El ajuste de turbos accionados electrónicamente se realiza mediante conexión a un comprobador externo ATP-3000 • Admite la instalación de turbocompresores de cualquier diseño FUNCIONES PRINCIPALES • Base de datos con más de 2.000 referencias de turbos • Cálculo del rendimiento del turbocompresor • Generación de gráfica de sobrealimentación en función del caudal de entrada y salida • Elaboración automática de los resultados en gráficos • Prueba de actuadores: tipos por vacío, neumáticos y eléctricos • Diagnóstico de servomotores de actuadores eléctricos (opcional) • Todas las mediciones en tiempo real • Calibración del banco de pruebas previa al inicio del trabajo • Función de prueba de la válvula N75 • Soplador incorporado para generar flujo de aire constante • Software Boost Test desarrollado internamente Ijdpfxsttg S Us Akpoth • Generación e impresión de informes del proceso de ajuste • Autodiagnóstico ESPECIFICACIONES TÉCNICAS Velocidad máxima de rotor: 99.000 rpm Caudal máximo del compresor: 110 m³/min Presión máxima del compresor: 900 mbar Vacío máximo generado por la bomba de vacío: -800 mbar Alimentación: 380V, 3Ph, 50Hz Consumo de potencia: 6 kW Dimensiones: 1330 × 770 × 1440 mm Peso: 265 kg

Kondisi: bekas, jarak tempuh: 31.000 km, daya: 120 kW (163,15 hp), pendaftaran pertama: 03/2023, jenis bahan bakar: bensin, warna: perak, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 5, Perlengkapan: ABS, garansi kendaraan bekas, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 540.169 km, daya: 425 kW (577,84 hp), pendaftaran pertama: 05/2017, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, inspeksi berikutnya (TÜV): 05/2026, rem: retarder, warna: oranye, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, panjang ruang muatan: 5.700 mm, lebar ruang muat: 2.500 mm, Perlengkapan: ABS, pemanas parkir, pendingin udara, sistem navigasi,

Kondisi: baik (bekas), Tahun pembuatan: 2009, KUKA KR 210 L150-2 2000 6-Axis Industrial Robot The KUKA KR 210 L150-2 2000 (Series 2000) is a high-performance 6-axis industrial robot, designed specifically for extended reach with a high payload capacity. The "L150" abbreviation indicates the extended arm version (Long-Version), which increases the maximum reach to 3,100 mm, while the nominal payload remains at 150 kg. Main Technical Data - Maximum reach: 3,100 mm - Nominal payload: 150 kg - Additional load (arm/swing): 50 kg / 100 kg - Number of axes: 6 - Repeatability: ± 0.06 mm - Own weight (without controller): approx. 1,285 kg Itjdozcwxuspfx Akpjh - Protection class: IP65 (standard) - Mounting position: Floor Axis Data (Range of Motion & Speed) The Series 2000 is equipped with powerful drive units that ensure high dynamics even with the extended arm: - Axis 1 (A1): ±185° | Max. speed: 86°/s - Axis 2 (A2): +90° to -61° | Max. speed: 84°/s - Axis 3 (A3): +65° to -209° | Max. speed: 81°/s - Axis 4 (A4): ±350° | Max. speed: 100°/s - Axis 5 (A5): ±125° | Max. speed: 110°/s - Axis 6 (A6): ±350° | Max. speed: 184°/s Typical Areas of Application Due to its large working envelope and payload capacity, this manipulator is ideally suited for: - Material handling and palletizing over long distances - Milling applications and mechanical processing (e.g. trimming of components) - Spot welding and handling in automotive manufacturing - Additive manufacturing and large-scale 3D printing "All from one source: We are happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more new and used articles in our shop! International shipping costs on request!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: KNAPP STREAMLINE Year of manufacture: 2010 Drive: SEW-Eurodrive motor Cross roller conveyor DPP – Dynamic Positioning Platform Motorized roller conveyor with sensors. Dynamic material positioning – Incoming cartons, boxes, or trays can be positioned, rotated, or precisely conveyed by the system. Iedpsf Arpbsfx Akpsth Change of direction, distribution – the system can transport goods in different directions, to other lines or machines. Stop and buffer function – can also serve as an automatic buffer. Transfer roller section: Length: 765 mm Width: 325 mm Transfer roller diameter: 50 mm Conveyor roller section: Length: 335 mm Width: 325 mm 4 support rollers: 50 x 310 mm Overall dimensions: Width: 800 mm Length: 1250 mm Height: 530 mm