Beli Adige Sys Lc5 bekas (1.285)

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Pjdpfx Aegfm Ryjl Iopr Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baik (bekas), Tahun pembuatan: 2018, de-1 Podpfx Aljy Dct Uo Iepr

Kondisi: sangat baik (bekas), pl-hu-001 Pedpfsyxta Iox Al Iepr

Kondisi: baik (bekas), 1 x Turbo Systems depositor. Lokasi di Melksham. Ppsdpfx Aey Dt Agjl Ier

Kondisi: bekas, nomor mesin/kendaraan: WSJPRS3277TB12670, konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 10/2007, panjang total: 13.670 mm, lebar total: 2.550 mm, suspensi: udara, ukuran ban: 385/65, kondisi ban: 30 persen, jarak roda: 9.000 mm, warna: lain, Tahun pembuatan: 2007,

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar total: 600 mm, panjang total: 1.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 150 kg, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, jangkauan kerja: 400 mm, tinggi produk (maks.): 30 mm, masa garansi: 12 bulan, model controller: SPS-Steuerung Siemens Simatic HMI, frekuensi input: 50 Hz, sambungan udara terkompresi: 6 batang, kapasitas beban per penyangga: 50 kg, akurasi pemposisian: 1 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, pencahayaan, penghadang cahaya keselamatan, Feeding and storage system for lightweight items in carrier trays. Tray feed for magazine loading in automated production processes. Specifically designed for surface- or contour-sensitive components. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4-8 seconds) • Maximum tray weight including workpieces: 5 kg • Maximum tray stacker weight: 50 kg Psdoyycqxjpfx Al Iepr • Positioning accuracy: ± 1 mm • PLC control system with operator and monitoring display • ESD configuration • Safety package: light curtain from Leuze for tray stacker • Prepared for AGV communication – Siemens IWLAN client • RFID read-write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact design with minimal space requirements • Flexible adaptation to various machines via multiple interfaces • Low investment costs • Fully equipped • Sturdy construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage: 400V / 50Hz / 3ph • Minimum compressed air connection: 6 bar • Dimensions: 1200 x 600 x 2300 mm (LxWxH)

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.700 mm, panjang total: 1.400 mm, tinggi total: 2.100 mm, 1 Ppedpfoy Au Dcjx Al Ier

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 600 mm, lebar penggilingan: 500 mm, tinggi total: 1.840 mm, panjang total: 2.900 mm, lebar total: 1.840 mm, tinggi penggerindaan: 230 mm, panjang meja: 600 mm, beban meja: 200 kg, lebar meja: 200 mm, For sale is an Asyst DUE Grind surface grinding machine, model A525 PNC 100. This machine has been fully refurbished based on a Jung 525 surface grinder. A key feature of this unit is that it can operate both conventionally and under CNC control. The machine is in excellent, almost unused condition and is ready for immediate operation. Technical specifications: - Year of manufacture: - Table length: 600 mm - Table width: 200 mm - X-axis traverse (table): 600 mm - Grinding height Y-axis: 500 mm - Z-axis travel, end position +/-: 230 mm - Table speed X-axis: 0.3–25 m/min - Magnetic chuck dimensions: 600x200 mm - Optionally with 3-point dresser: 350x200 mm - Max. workpiece weight (incl. magnet): 200 kg - Working area: 400 mm - Y-axis traverse speed: 0–1,000 mm/min - Z-axis traverse speed: 0–1,000 mm/min - Y-axis positioning accuracy: 0.001 mm - Z-axis positioning accuracy: 0.001 mm - Y-axis measuring system resolution: 0.0001 mm - Grinding wheel dimensions: 250x30x51 mm - Spindle speed: 100–3,800 rpm - Spindle motor power: 100–3,800 kW - Automatic dressing with fixed diamond station TA 3/5 Dimensions: 2,900 x 2,320 x 1,840 mm Weight: 2,300 kg Transport and loading can be organized on request, at additional cost, throughout Europe. Prices are subject to VAT. Inspection possible by appointment. Feel free to contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale Ppedjyx D Ipjpfx Al Ijr BUY / SELL OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, visit our website.

Tahun pembuatan: 2005, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20005261297, Sistem kompresor tukang Schneider lengkap dengan pengering terpasang pada palet baja. Kondisi sangat baik! Dilengkapi dengan koneksi saklar bintang-segitiga, lihat gambar. Pengering dipasang di bagian belakang tabung! Podpfx Aey Atutsl Iopr

Kondisi: bekas, konfigurasi gandar: 1 as, pendaftaran pertama: 01/2016, panjang ruang muatan: 11.100 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.660 mm, panjang total: 11.600 mm, lebar total: 2.600 mm, tinggi total: 4.000 mm, suspensi: udara, ukuran ban: 275/70R22,5, warna: lain, Tahun pembuatan: 2016, Perlengkapan: ABS, tail lift,

Kondisi: bekas, Flachschleifmaschine Asyst PNC100 CNC [ELB] 600*200 Ppodpswxfr Njfx Al Ijr Schleifscheibe 300 mm * 40 Die Maschine befindet sich in unserem Lager in Gussago (BS).

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, de Ppjdpfx Aewm Nq Eol Isr

Kondisi: bekas, Tahun pembuatan: 2016, Overview This packaging module, comprising a tray former and a carton sealer, was manufactured in 2016 by the Danish company SOCO SYSTEM A/S. The system consists of an automatic tray former and a carton sealer designed for fully automated carton handling in packaging lines. The tray former forms flat carton blanks into trays, which are conveyed via a conveyor belt to subsequent processing stages, while the carton sealer applies self-adhesive tape to seal the cartons after they have been filled. Technical Data - Output: 12–14 cycles/min (tray former) - Application: Carton erecting and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic carton sealer with tape application - Supply: - Voltage: 3 × 400 V - Frequency: 50/60 Hz (tray former), 50 Hz (carton sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (carton sealer) - Air pressure: 0.6–1.0 MPa - Nominal current: 2 A (tray former), 3 A (carton sealer) Scope of Delivery Pedsyxxxvspfx Al Iopr - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Carton sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic carton sealer with integrated conveyor and tape sealing system

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Lamina Gluer adalah mesin lipat, lem, dan perekat pita inline yang diisi secara manual. Dalam kondisi teknis sangat baik, setelah renovasi total. Pengaturan tanpa alat memungkinkan perubahan cepat bahkan untuk produksi kecil. Pilihan pada mesin termasuk lem dingin, unit penyangga belakang, aplikator pita, dll. Mesin berada di lokasi kami, uji coba di tempat dimungkinkan. Ppjdpfjyzfkksx Al Ior Ukuran Lembar Maksimal: Lebar: 2200 mm Lebar Lembar Minimum: 70 mm Listrik: 208 V, 3 fase, 60 Hz; atau 400 V, 3 fase, netral, 50/60 Hz; atau sesuai permintaan Kebutuhan Udara: 6 bar; 80 psi; 34 CFM, sekitar 50 L/menit

Kondisi: baik (bekas), Spiral freezer dengan throughput sangat tinggi, sebelumnya membekukan lebih dari 3 ton burger ayam goreng Mc setiap jam sehingga sangat terawat dengan baik. Sabuk selebar 910 mm, 28 tingkat, tinggi produk 84 mm. Dibongkar secara profesional. 440 kW. Instalasi pendingin tersedia secara terpisah. Ppodpfohrm Ngjx Al Ior

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Printer berfungsi penuh. Lisensi bahan model untuk jenis bahan: ABS, PC, Ultem 9080. Ppedpfx Aloyzzmbo Isr

Kondisi: baru, Tahun pembuatan: 2026, en-001 Ppjdpeffwlqefx Al Ijr

Kondisi: baru, Tahun pembuatan: 2026, berat keseluruhan: 3.900 kg, jenis bahan bakar: diesel, kapasitas tangki: 600 l, warna: merah tua, daya: 2.000 kW (2.719,24 hp), arus keluaran: 360 A, tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 200 kW (271,92 hp), daya nominal (semu): 250 kVA, daya kontinu: 200 kW (271,92 hp), daya semu kontinu: 250 kVA, panjang total: 4.000 mm, lebar total: 1.450 mm, tinggi total: 2.300 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: Perkins, jenis pendinginan: air, Diesel generator set 250 kVA Generator type: P250SSF Condition: New, 2026 Engine: Perkins 1206A-E70TAG2 Alternator: Leroy Somer LSA 46.3 M7 Rated power (Standby/ESP): 275 kVA / 220 kW Rated power (Prime/PRP): 250 kVA / 200 kW Rated power (Continuous/COP): 200 kVA / 160 kW Rated voltage: 230/400 V Rated frequency: 50 Hz Control voltage: 12VDC Speed regulation: electric Voltage regulation: electronic (AVR) Sound-insulated, weatherproof Earthing system: TN-C Includes control panel Includes batteries (2 x 110Ah) Includes integrated fuel tank (600 L) Includes integrated bund for fuel and engine fluids Includes power circuit breaker (ABB, 4-pole) Includes documentation/manual Includes wiring diagram Warranty: 12 months or 2,000 operating hours, whichever comes first. You can configure your generator individually with us and order a wide range of custom options: - Socket package 16A - 125A with residual current circuit breaker (all-current sensitive) - Remote control - Insulation monitoring - Enhanced sound insulation (down to 65 dB/ 7m possible) - Fully automatic standby power switching unit with automatic mains-generator transfer available on request Ppsdpfofxlddex Al Isr - Mains parallel operation with load sharing and peak load management (ComAP IG 1000 controller, VDE 4510 certified) - CHP variant - Emergency power system (NEA) for indoor installation with air ducts, ventilation, etc. Manufactured in Germany / Made in Germany Nationwide delivery available at extra charge. Contact us by e-mail or call us, we will be happy to advise you and provide a non-binding offer.

Kondisi: bekas, tischdaten-2400x1200-2024 Pedeyxhhyopfx Al Ijpr

Kondisi: bekas, konfigurasi gandar: 1 as, pendaftaran pertama: 05/2020, panjang ruang muatan: 11.150 mm, lebar ruang muat: 2.450 mm, tinggi ruang muatan: 2.670 mm, panjang total: 11.650 mm, lebar total: 2.550 mm, tinggi total: 4.000 mm, suspensi: udara, ukuran ban: 385/65R22,5, warna: lain, Tahun pembuatan: 2020, Perlengkapan: ABS, tail lift,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jenis arus masuk: AC (pendingin udara), tegangan masuk: 240 V, arus masuk: 13 A, frekuensi input: 60 Hz, Kami menawarkan printer 3D bekas Stratasys Objet350 Connex3 ini, tahun produksi 2019. Model: Objet350 Connex3 Nomor Seri: 370192 Tahun Produksi: 2019 Tegangan daya: 100–120 V Tegangan daya: 200–240 V Arus nominal: 13,5 A Arus nominal: 7 A Frekuensi: 50–60 Hz Jumlah fasa: 1 Beban arus jangka pendek: 1000 A Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami melalui telepon. Pedpfx Aeyzq Nlel Iopr

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G1001366, Tahun pembuatan: 2020, jam operasional: 3.956 h, tegangan masuk: 220 V, Data teknis: Mesin: 82,5 × 62 × 59 cm; 106 kg - Platform konstruksi: 294×192×148,5 mm Ketebalan lapisan: 28 µm; 16 µm Presisi: 0,1 mm, dapat bervariasi tergantung pada geometri model, ukuran, orientasi, material, dan metode pascaproses Resolusi: Sumbu X: 600 dpi; sumbu Y: 600 dpi; sumbu Z: 1600 dpi Podpfoyzzufox Al Iopr

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 21_0346, NEW – UNUSED High-performance positioner for manual or robotic welding – lifting and turning device. Special equipment for demanding applications, developed and manufactured by FÖRSTER Welding Systems GmbH. Maximum workpiece diameter: 2,500 mm Maximum workpiece weight: 20 tonnes Dimensions of welding positioner: 7,000 x 3,000 x 3,750 mm Weight (without counterweight): 20,000 kg Overall dimensions of complete system: 8,900 x 4,800 x 3,750 mm Total weight of complete system: 40,000 kg Counterweight included in the delivery. Comprehensive documentation available. Manufacturer technical support available upon request. Ppedeurlcrjpfx Al Ijr Machine location: Central Poland.

Kondisi: baik (bekas), de-to-hu-01 Ppedpfx Aljyw Hwke Isr

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 16501575, laju aliran volumetrik: 4.800 m³/jam, tegangan masuk: 380 V, daya: 2,5 kW (3,40 hp), Perlengkapan: Pelat tipe tersedia, The resulting dirt particles, emulsion and oil mist, as well as fumes, are captured directly at the source and conducted through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via a siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This filtration stage consists of an aluminum frame equipped with a filter mat type G4 and a filter mat type F5 according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filtration stage consists of a large-area particulate air filter of class H13. A consistently high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Pedjyz Sn Njpfx Al Ijpr