Beli Transfluid Mb 642 bekas (12)

Kondisi: baru, Tahun pembuatan: 2025, Tube flaring machine, hydraulic flaring machine, hydraulic tube flaring machine, 37° flaring machine, 90° flaring machine, ORFS flaring, JIC flaring, tube end processing, flaring device, tube processing machine, rotary forming machine Performance: - For tubes from 6 – 42 mm Ø - Max. wall thickness 4 mm (for a tube Ø of 42 mm in steel) - Cycle time (adjustable per forming operation): 4 – 15 sec. Gsdjwzbc Nopfx Adqekc - RPM: 200 Machine equipment / standard features: - For forming tube ends at angles from 37° to 90° (tool-specific) in a single operation using the rotary forming process - Depending on tube diameter, 180° bends with a minimum free dimension of 145 mm can be processed - Clamping length depends on tube size, approx. 1.0 x D - Forming length is limited by tool geometry - Operation and control via touch panel - Activation by hand switch - Hydraulic feed of the tool carrier, adjustable speed - Electrically adjustable length stop to define flare size - Electrically adjustable forming stroke to set tool feed - Electrically adjustable rolling duration - Swiveling clamping jaw for easy insertion of ORFS rings - Integrated drawer for tool storage - Includes transparent safety covers for the working area - Standard hydraulic and control components - Stationary machine with base frame - Color: RAL 7047 grey, RAL 3020 red Drive systems: - Workpiece clamping: servo-hydraulic - Tool carrier feed: servo-hydraulic - Tool carrier rotation: electric Machine data: - Nominal pressure: 250 bar, operating pressure: 200 bar - Operating voltage: 400 V – 50 Hz – 3 phase – 4.5 kW The machine’s average power consumption is approx. 1.8 kWh/h. Since consumption depends significantly on factors such as tube size and geometry, machine speed, and power supply, this value is to be used as a reference only. - Length: 1230 mm - Width: 710 mm - Height: 1240 mm - Weight: approx. 800 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2005, jam operasional: 142.500 h, Diameter pipa (maks.): 50 mm, Panjang pipa (maks.): 2.000 mm, radius pembengkokan (maks.): 150 mm, Pipe bending machine, PLC-controlled bending machine, tube bender, pipe bending system, tube processing, pipe technology, electro-hydraulic, mandrel bending machine Performance data: - Round steel tube Ø 50 x 3.0 mm - Round stainless steel tube Ø 50 x 2.0 mm - Max. section modulus 5.0 cm³ Gsdpfx Ajwzammodqekc - Bending angle up to 180° + 10° springback compensation Machine equipment / Standard features: - Tube insertion length / usable length: 2000 mm - Maximum bending radius: 150 mm - Bending height: 1050 mm - Freestanding bending head, 850 mm in length - The compact freestanding bending head allows processing of tubes with a minimum clearance of 400 mm between two bends - Electro-hydraulic drive - Automatic operation: selectable via key switch, allows selection of the following operating modes - Function activation via hand switch - In manual mode, all functions can be triggered by push-button in jog operation - In semi-automatic mode, the tube is clamped after the first trigger activation and bent after the second, then the machine returns to its starting position - Widely opening counter bearing, so that with the respective configuration (VWE A-642) the rotation unit can move just behind the bending tool - Bending direction: clockwise - Hollow shaft for achieving small radii - For radii starting from 1x tube diameter - Manual tool reset - Automatic tool locking - All functions hydraulically operated - Control via push-buttons - Standardized hydraulic components - Stationary machine - Colour: RAL 7037 dust gray, RAL 3000 red

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Tube end forming machine, axial tube processing, tube end sizing machine, tube swaging machine, swaging machine for tubes, tube end processing, axial tube deformation, tube forming machine, expanding, reducing, expanding machine, reducing machine, beading, flaring, tube forming Performance: - Suitable for round tubes from 6–32 mm Ø (depending on forming geometry) - Maximum wall thickness 1.5 mm for tube Ø 32 mm in ST 37 - Forming force 98 kN - Clamping force 98 kN - Forming length 80 mm Gkjdpfx Aowvq Svedqjc - Number of forming stages 3 - Cycle time (1st stage) 3.5 sec. - Cycle time (per additional stage) 2.5 sec. Machine equipment / Basic configuration: - For axial forming of tube ends, e.g., reducing, expanding and beading forming - With automatic tool changer for up to three forming stages in a single clamping - Tool change via servo motor - Electrohydraulic drive - Includes position measuring system for the forming axis for easy programming and cycle time optimisation, minimising wear and noise - Clamping length depends on tube size, approx. 150 mm - Forming process is dependent on the specific tooling - Forming length is limited by the tool geometry - Hydraulic tube clamping - Hydraulic tube forming - Clamping cylinder Ø 80 mm - Forming cylinder Ø 80 mm - Includes connections for pneumatic jaw shifting tools - Standard hydraulic and control components - Machine mounted on a sheet metal base frame (with integrated hydraulics and electrics) Machine data: - Rated pressure 250 bar, working pressure 160 bar - Operating voltage 400 Volt – 50 Hz – 3 ph. – 9 kW Average power consumption of the machine is approx. 3.6 kWh/h. Actual consumption strongly depends on factors such as tube size and geometry, speed, and power supply, so this value is a guide only. - Length 1,950 mm - Width 1,600 mm - Height 2,000 mm - Weight approx. 1,900 kg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, CNC tube bending machine, tube bender, tube bending system, tube processing, tube technology, right-left bending, 3D tube bending, servo-electric, multi-axis bending machine, mandrel bending machine Performance: - Round tubes steel S235: 22 x 2.0 mm Ø - Round tubes stainless steel 1.4571: 22 x 1.5 mm Ø - Max. section modulus: 0.5 cm³ (S235) - Bending angle: up to 180° + 10° overbend - Bending axis speed: max. 300°/sec - Feed axis speed: max. 1800 mm/sec - Rotation axis speed: max. 600°/sec - Bending axis repeatability: +/- 0.05° - Length repeatability: +/- 0.05 mm - Rotation repeatability: +/- 0.05° - Tube loading length/usable length for mandrel bending: on request - Radius range: max. 66 mm - Bending height: 1150 mm - Thrust force for length positioning: 2.5 kN - Bending axis drive: servo-electric - Rotation and length positioning: servo-electric - Auxiliary axes drive (e.g., clamping, mandrel in/out, etc.): servo-electric - Bending head positioning: servo-electric - Sliding piece positioning (radial): servo-electric Gkodpfx Adswvqgteqsc - Sliding piece following (axial): servo-electric - Material clamping (collet): pneumatic Machine Specifications/Standard Equipment: - Bending head for right/left bending in one clamping - Bending head can be positioned horizontally and vertically, includes rotary axis for head changeover (right or left bending) - Bending head positioning via combined transverse/rotational axis, enabling right/left bending in one clamping - Bending direction freely programmable, alternating right/left - Each bending head has a standard changeover height of max. 50 mm, allowing at least 2 tooling sets to be mounted depending on tube size—for instance, to use different radii or clamping blocks as required - Maximum radius difference between each level: 1.5xD - With hollow shaft to enable use of tools for small radii - Minimal clamping length at tube end due to wide-opening counterholder, allowing the rotation unit to move directly behind the bending tool -> A separate collet is required for each tube diameter - Chuck for use of segmented collets: depending on the contour of the segments, pre-formed tube ends can also be clamped - Material clamping in the VWE (front clamping unit) is pneumatic - Foot switch for opening or closing the collet in the VWE for easy loading and unloading - Traveling counterholder for bends up to 180° (for radii up to max. 2xD; for larger bending radii, the counterholder can be repositioned to maintain constant support up to 180° bending angle) - Support for the mandrel rod and tube along the full length for correct positioning - Mandrel can be automatically retracted during the bending process as programmed - Minimum quantity lubrication for automatic mandrel lubrication; lubricant volume adjustable, applicable from tube inner diameter 13.5 mm - Central lubrication for automatic lubrication of all moving parts at necessary intervals - Air conditioning for electrical cabinet cooling - Functional activation via manual switch on the control panel - All functions can be operated via keyboard and mouse in manual control mode - The machine is built to the latest safety standards. To comply with CE directives, an additional safety barrier (DB-SA...) is required.

Kondisi: bekas, Tahun pembuatan: 1997, Rohrdurchmesser_60mm Gsdpfot I D Uxex Adqjkc

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1998, nomor mesin/kendaraan: 7385, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Transfluid, model controller: IPU 20, Diameter pipa (maks.): 648 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 3 mm, Sudut pembengkokan (maks.): 180 °, radius pembengkokan (maks.): 125 mm, radius tekuk (min.): 50 mm, lebar kerja: 6.000 mm, panjang mandrel: 5.500 mm, jumlah sumbu: 3, tinggi kerja: 1.300 mm, panjang meja: 7.000 mm, lebar meja: 900 mm, tinggi meja: 1.300 mm, berat keseluruhan: 1.000 kg, panjang total: 7.000 mm, lebar total: 900 mm, tinggi total: 1.300 mm, daya: 5 kW (6,80 hp), tegangan masuk: 400 V, arus masuk: 25 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, kapasitas tangki oli: 1.320 l, tekanan kerja: 200 batang, Perlengkapan: dokumentasi / manual, henti darurat, Perangkat lunak pembengkokan memerlukan pembaruan baru. Mandrel pembengkok tersedia, alat pembengkok tidak termasuk. Gkjdpfx Adjxcxupjqoc

Kondisi: bekas, Tahun pembuatan: 1996, Hydraulic mandrel bending machine with extensive accessories Presetting of 8 different bending angles with digital display Digital length measurement and digital torsion/rotation display Gsdoq Daxtepfx Adqjkc Max. usable length: 6096 mm Round steel tube (S 235): 60.0 x 6.0 mm Round stainless steel tube (S 355): 60.0 x 4.0 mm Square steel tube: 50 x 50 x 4.0 mm Rectangular steel tube: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1,800 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Scope of performance: 20mm–60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, usable length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions (L/W/H): approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection possible. Gjdpfx Aewg E Dhodqjkc

Kondisi: baik (bekas), Tahun pembuatan: 1996, Pipe diameter: 6 - 28 mm Wall thickness: 2 mm Minimum bending radius: 2 x D Control system: IPU 20 Maximum bending radius: 5.0 x D mm Maximum bending angle: 190° Mandrel length: 3000 mm Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space requirement: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and display in the operator panel for angle presets, angle detection, and measurement via absolute encoder, automatic tool plate return, rotation unit with digital display, hydraulic quick-release chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: Hydraulic on/off, operating mode selection, clamp close/open, advance/retract, mandrel advance/retract, bend forward/reverse, lock forward/reverse, mandrel lubrication, rotation device forward/reverse, plate return, length stop forward, emergency stop. The machine comes from prototype production and was used only sparingly until 2000. Afterwards, the machines from this department were sold. The buyer never used the tube bending machine, therefore it has only been stored and has not operated since (original paint). Gkedevtgn Njpfx Adqsc This is a used machine, therefore we sell under exclusion of any warranty. INVENTORY DEALER WITH 1600 m² SHOWROOM.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1998, radius pembengkokan (maks.): 600 mm, panjang mandrel: 1.200 mm, ketebalan dinding: 8 mm,

Kondisi: bekas, Tahun pembuatan: 1993, Technical details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Programmable control: Gelma MM-1 Tube feed length: 1,800 mm Machine weight approx.: 0.232 t Machine dimensions approx. LxWxH: 1.9 x 0.7 x 1.3 m Semi-automatic TUBE BENDING MACHINE Operating modes include manual and semi-automatic operation Application: for repeated, multiple bending processes of tubes (e.g. hydraulic piping) The swivel unit features pre-selection for 3 different bending angles in single and automatic mode. Currently, the machine is equipped with a stop rod for tube size Ø 10 mm with 6 angle settings. Bending radius depends on the material used. Gedpfx Aeu Ibyyjdqskc The bending machine is mobile/movable. Scope of delivery/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm *

Kondisi: diremajakan ulang (bekas), Fungsionalitas: fungsi terbatas, Tahun pembuatan: 2003, jam operasional: 24.000 h, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 4.100 mm, Sudut pembengkokan (maks.): 183 °, radius pembengkokan (maks.): 300 mm, ketebalan dinding: 8 mm, de-Transfluid DB 2090 DB CNC Dornbiegemaschine für Rohre. Hochwertige deutsche Maschine in exzellentem Zustand, die Haupt-Hydraulikpumpen wurden komplett generalüberholt und der Hauptkopf vollständig instand gesetzt. Es muss lediglich ein neuer Encoder installiert werden, dann ist die Maschine betriebsbereit. Gkedpstrd T Tjfx Adqoc Ausstattung: - Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D - Vorzeitiger Dornrückzug - Vollautomatische Einstellung der Spannbacken und Mitnehmer - Verstärkter Mitnehmer für enge Radien bei dünnwandigen Rohren - Lange Aufspannlänge mit 4000 mm Überdorn Im Lieferumfang ist umfangreiches Werkzeug im Wert von über 150.000 AUD enthalten: - 101,6 mm - 152 mm CLR - 101,6 mm - 200 mm CLR - 76,2 mm - 114 mm CLR - 76,2 mm - 200 mm CLR - 76,2 mm - 238 mm CLR - 63,5 mm - 96 mm CLR - 57,2 mm - 86 mm CLR - 50,8 mm - 76 mm CLR - 44,5 mm - 67 mm CLR - 40 x 40 mm - 120 mm CLR - 50 x 50 mm - 150 mm CLR - 60,3 mm - 150 mm CLR - 48,3 mm - 120 mm CLR