Beli Biesse Дърводелска Машина, Поточна Линия bekas (376)

Kondisi: sangat baik (bekas), NC 400 electronic programmer Throughfeed motorised conveyor belts (qty): 2 Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Hnjdpjlwqrtsfx Agqok Upper vertical workpiece clamps (qty): 4 Continuous screws for chip removal (qty): 2 Digital display of position data (axis) Total connected load (kW): 27.7 The CNC control monitors the movement (X-axis) of the horizontal drilling supports The CNC control monitors the movement (Y-axis) of the stops The CNC controls the movement (Z-axis) of all vertical drilling supports

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in-line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam interval (mm): 500 FORMATTING UNIT (for each side): Protection cutter (pre-milling) AS 10 (5.8 kW) 2 x Hoggers DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) Edge pressure section (CNC controlled). Edge magazine for rolls (6-fold) Trimming unit IT 90-S (0.3 kW x 2) 28m/min. 0 – 25°. PNEUMATIC CNC controlled multi-profile milling unit RF 30 (0.65 kW x 2) 0 – 25° Multi-function unit (radius and contour milling unit) AR 80 (0.3 kW x 2) 25 m/min – ROTAX Spindles with automatic tool change (tools with 8+8 positions) Hedpfx Aou Tg Uqogqjnk CNC controlled multi-profile scraping unit RB 30 Flat scraping unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for boards (useful height mm 80) as buffer to accelerate the working cycle

Kondisi: sangat baik (bekas), Longitudinal panel saw (Splitter) for grooving and/or for cutting a single panel into two parts - Min. panel length: 500 mm - Max. panel length: 2700 mm Hnsdpfxou Tqb Uj Agqjk - Min. panel width: approx. 300 mm - Max. panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Max. feed speed: 50 m/min (4 kW) - Installed total power: 43.2 kW The machine consists of the following units: POS. 1 Milling unit for grooving from below (7.4 kW), max. diameter 300 mm POS. 2 Lower scoring saw (7.4 kW), max. diameter 350 mm POS. 3 Upper scoring saw (7.4 kW), max. diameter 350 mm POS. 4 Lower main saw (splitting blade) (7.4 kW), max. diameter 350 mm

Kondisi: sangat baik (bekas), Complete factory for furniture production, comprising: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side moulding and edge banding line "HOMAG", comprising: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC line for drilling, milling, and hardware insertion, consisting of: Carousel loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfer modules KZ2090) Wide-belt sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with automatic infeed and stacking system "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with through-feed carcass press KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter) with stacking system "ESSE2" KZ2009) Veneer department (double-knife veneer bundle guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; veneer splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate applications Hnedsh T Dvtepfx Agqok KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, glue application machines, etc.), extraction systems, roller conveyors, shelf systems (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user's site and can be inspected by appointment.

Kondisi: sangat baik (bekas), Double-Sided FORMAT & EDGE BANDING MACHINE (First machine in a production line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Panel Thickness (min/max) mm: 10 - 60 Working Width (min/max) mm: 270 - 1200 Control System / Software: SINITRA Feed Speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and Noise Protection: Enclosed cabin Hsdjt N Ix Ropfx Agqsnk Side Adjustment of Aggregate Carrier: Manual FORMATTING UNIT (for each side): 2 x DT 10 Pre-milling Units (5.8 kW each) Free space for jointing unit FS Jointing Unit ES30 + ER30 (5 kW each) 0° - 90° Universal Milling Unit Softforming SF 10 (2 x 2.4 kW) 0° - 45° Spraying Unit (for liquid release agent) EDGE BANDING SECTION (for each side): Gluing Unit (Hot Melt Adhesive + Pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating Unit RP 10 Edge Pressure Zone (CNC-controlled) Pressure Roller Track (revolver) for Straight Edges and Softforming (softforming) Soft PF40 (4 Pos.) mm 800 (Guillotine CI10+CS10+RL10) - Edge Magazine for Rolls (6 positions) Milling Unit RS 10 (2 x 1.3 kW) Milling Unit Softforming RF 10/SF (2 x 0.65 kW) Multi-profile Milling Unit RF 30 (2 x 0.65 kW) Universal Milling Unit for Grooving/Rebating and Profiling FB 30 (2 x 4.5 kW) 0° - 90° Multi-profile Scraper Unit RB 30 Flat Scraper Unit RC 05 / Soft Spraying Units (for polishing liquid) + Buffing Unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection: enclosure Lateral adjustment of aggregates carrier: manual Cam spacing (mm): 500 FORMATTING UNIT (per side): Pre-milling cutter AS 10 (5.8 kW) 2 x Hogging unit DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid release agent) EDGE BANDING UNIT (per side): Edging unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°, pneumatic Multi-profile routing unit (CNC-controlled) RF 40 (1 kW x 2) 0 - 25° Multifunctional unit (radius and profile trimming) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool change (tools) 2 universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC-controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying units (for polishing fluid) Hnsdehvahhjpfx Agqjk Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: A) INFEED STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. Hodpfx Ashvah Nsgqenk B) ROTATING TRANSFER UNIT (longitudinal/crosswise), with double-cone "RBO" Model GPK-1 C) Double-sided Sizing and Edge Banding Machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180° face-down) "RBO" Model Ribaltatore E) ROTATING TRANSFER UNIT (crosswise/longitudinal), with double-cone "RBO" Model GPK-2 F) OUTFEED STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable working head – Vertical table (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers to secure workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Hsdoihfiiopfx Agqenk Separate electrical and control cabinets Total connected load (kW): 35 WORKING UNITS: Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (qty.): 2 Independent horizontal drilling spindles (qty.): 36 (9+9 = 18 x 2) Motor power for drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) qty.: 1 Power of vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Carousel magazine, 10 tool positions

Kondisi: sangat baik (bekas), Mesin dua sisi yang dapat ditempatkan secara in-line setelah Multi Borer tipe melalui untuk siklus proses otomatis pengeboran dan pemasangan dowel. - Programmer Elektronik "CNI" NC 400 - Kabinet kontrol dan listrik built-in - Jarak maksimum antara kepala horizontal sekitar 3200 mm Hnedow Ug A Hopfx Agqek - Sisi kanan mesin dapat digerakkan dan diatur (sesuai lebar panel) - 2 sabuk konveyor bermotor (0,25 HP x 2 motor) - 1+1 tangki penyimpanan dowel untuk pengumpanan otomatis ke nozle - 6+6 nozle pemasukan horizontal (injektor lem dan penekan dowel) - Sistem pengumpanan lem bertekanan tinggi - Total daya terpasang sekitar 5 kW.

Kondisi: sangat baik (bekas), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps + 2 continuous augers for chip extraction CNC control NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps - 2 continuous augers for chip extraction Hnedpfx Aet Ig A Ssgqjk 2nd drilling machine connected to the NC of the 1st machine.

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 Pass-through motorized conveyor belts No. 2 Horizontal drilling supports No. 2 Drilling units per each horizontal drilling support Spindles per each horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Hodpoidqd Tsfx Agqenk No. 5 Lower vertical drilling supports No. 2 Drilling units for each lower vertical drilling support No. 2 Upper vertical drilling supports No. 2 Spindles for each drilling unit of upper drilling supports No. 4 Upper vertical workpiece clamps Chip removal conveyor Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control monitors the movement (X-axis) of the horizontal drilling supports. The CNC control monitors the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the conveyor belts.

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Hsdpfjidqf Rox Agqsnk Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles per drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip removal conveyor belt Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control regulates the movement (X-axis) of the horizontal drilling supports. The CNC control regulates the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the transport belts.

Kondisi: sangat baik (bekas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each equipped with 2 drilling heads, each with 1.8 kW motor and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction Numerical control system (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min Hjdpfsvnq Txjx Agqsnk - 2 horizontal drilling units (each with 8 horizontal units – for gluing and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Cam pitch (mm): 500 FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) Hsdpfx Aju Rc Ansgqsnk EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), Double-sided - First machine in a machine line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system PC Base Windows / PC Software / SINTRA Feed speed (adjustable) m/min 10 - 40 (INVERTER C.N.) FORMAT PROCESSING (for each side): Spray unit (for liquid anti-adhesive) Hnsdpfx Asu Rc Hyegqok No. 2 Hoggers DT 10 (5.8 kW x 2) Free slot EDGEBANDING SECTION (for each side): 1st Gluing unit (Hot Melt + pre-melter) SP 30 (High Melt + Edge Control EC 40) 2nd Gluing unit (Pre-melter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 Universal milling unit for grooving/rabbeting/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraping unit (CNC controlled) RB 40 Flat scraping unit RC 20 Spray units (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), CNC-controlled electronic machine Hnodpjhvi Dujfx Agqok PC control system type NC 500 – Tooling System software No. 2 through-feed motorized conveyor belts – feed speed (m/min) approx. 35 – 75 No. 2 horizontal drilling supports Drilling units per horizontal drilling support (pcs.) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical drilling support (pcs.) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (pcs.) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screws (endless) for chip extraction CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Hv) of the 2 horizontal drilling supports CNC controls the movement (X-axis) of the vertical drilling supports CNC controls the movement (axis Y1 and Y2) of the drilling units CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC system manages the complete programming of automatic work cycles

Kondisi: sangat baik (bekas), PC control, type NC 400 (with software for managing work cycles) No. 2 motorized throughfeed conveyor belts Max. working width (mm): 3200 - Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit: 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit for upper drilling supports No. 2 upper vertical workpiece clamps No. 2 screws (endless) for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops Hnodpfoi D D Tfsx Agqsk OPTION: Front loader (for narrow parts: Min 60 mm - Max 260 mm)

Kondisi: sangat baik (bekas), Flexible NC-Automatiklinie zum Bohren, Fräsen und Beschlagsetzen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel-(Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC-Modell Vector GLR-X 30-13 Hsdpfx Agjidmkrjqjnk KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC-Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC-Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn mit ebenfalls motorisierten Bändern (zum Drehen der Platten um 180° für die Übergabe an die Montagelinien)

Kondisi: bekas, Tahun pembuatan: 2005, 2005 BIESSE ROVER B 4.40 FT Pusat kerja CNC 3-sumbu Spesifikasi teknis pada foto terakhir Hjdpfx Agjwmdynsqsnk Jam mesin menyala: 45.343 Jam kerja otomatis mesin: 27.267

Kondisi: bekas, Condition: Used - Compatible Machine: EDGE BANDER - If interested, we offer an overhaul service; please contact us. Hsdpfx Agjvazxcsqenk

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Ferwood code: RS0003205 - Manufacturer code: 2161A0065 - Condition: Like new (showroom item) - Functionality: Fully operational - Compatible machines: CNC HOMAG - WEEKE - BIESSE - SCM - MORBIDELLI - If interested, we offer refurbishment services, please contact us. Hnedpfx Ajv Azcmsgqjk

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood Code: RU0011644 - Manufacturer Code: K6343K0945 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Hedpfx Agswtm A Seqsnk

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood code: RU0011649 - Manufacturer code: K6343K0946 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Hjdpfx Agewtnnpoqjnk

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood Code: RU0011652 - Manufacturer Code: K6343K0944 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Hodpfx Aowtzcyegqonk

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Ferwood Code: RS0003190 - Manufacturer Code: - Condition: As new (display item) - Functionality: Fully operational - If interested, we offer a reconditioning service, please contact us. Hjdpowtz Txsfx Agqonk