Beli Cronosstech Chp 200 bekas (17.113)

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, lebar meja: 670 mm, panjang meja: 950 mm, gaya punching: 100 t, lubang tembus di meja: 180 mm, diameter silinder: 45 mm, penyesuaian langkah: 120 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are types of mechanical presses powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. Thanks to their high production speed and repeatability, they offer efficient and reliable solutions for mass production lines. Podpfsvtx Inex An Ijra The CRONOSSTECH C-Type Excentric Press 100 Ton is designed for stable performance in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for serial production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance requirement thanks to centralized automatic lubrication • Production-ready use with PLC control + two-hand/foot pedal operation Application Areas • Cold cutting and punching operations • Cold shearing applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Slides supported on 4 surfaces • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliance • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand–finger safety protection system • PLC control system • Two-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch-screen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One tooling set upon request • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: If you require any changes in the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), ketinggian potong (maks.): 1.100 mm, lebar pemotongan (maks.): 1.600 mm, masa garansi: 12 bulan, STANDARD FEATURES - Independently operated dual hydraulic vises - Linear rapid descent system - Variable blade speed control - Variable head descent speed control - Hydraulic blade tensioning system - Table traverse system - Safety switches - Chip conveyor - Motorized chip brush - 1 piece band saw blade - 24 months mechanical, 12 months electrical warranty - Country of origin: Turkey TECHNICAL SPECIFICATIONS CUTTING CAPACITY ROUND (MM): 1100 CUTTING CAPACITY SQUARE (MM): 1100X1100 CUTTING CAPACITY RECTANGULAR (MM): 1100X1600 BLADE SIZE (MM): 67X1.6X11630 Prsdpfx Aevvcp Uen Ioa BLADE SPEED (M/MIN): 20 – 80 MAIN MOTOR (KW): 7.5 HYDRAULIC MOTOR (KW): 1.5 COOLANT PUMP (KW): 0.09 VOLTAGE (V): 380 FREQUENCY (HZ): 50 WORKING HEIGHT (MM): 535 MACHINE DIMENSIONS (MM): 5390X1760X2875 WEIGHT (KG): 8000 WE MANUFACTURE STRAIGHT AND MITRE CUTTING MODELS FROM 220MM UP TO 3000MM. FOR FURTHER INFORMATION, PLEASE CONTACT US.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, lebar meja: 900 mm, panjang meja: 1.200 mm, lubang tembus di meja: 260 mm, penyesuaian silinder hidrolik: 150 mm, penyesuaian langkah: 200 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief of frame and welded parts by vibration - Table parallelism and perpendicularity tolerance in compliance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide mounted on 8 guideways - Slide cushioning with cylinder - Slide, connecting rod, ram nose and similar parts in GS52 cast steel - High strength monoblock crankshaft – 4140 - Bronze bushings inside the connecting rod (Zr14) - Rear flywheel - Equipped with spare bolster plate - Hydraulic overload protection - Motorized table-slide adjustment - Automatic central lubrication system - Pneumatic pedal with latch and dual-hand operation with timer - Digital counter - PLC application and touchscreen – DELTA - Electrical switchgear by SIEMENS-SCHNEIDER - CE compliance (optional) - Finger protection light barriers – SICK, LEUZE - Safety PLC (monitors all electrical systems, valves, dual-hand and pedal controls) – PILZ - Dual-solenoid safety valve – GPA, TOPAIR - Lockable position switch and control panel - Safety block - Protective guards as per CE regulations TYPE: D-TYPE MONOBLOCK FRAME Capacity: 300 Tons Table-Slide Distance: 530 mm Distance Between Side Walls: 1280 mm Slide Adjustment: 150 mm Approx. Press Width: 1700 mm Approx. Press Depth: 2200 mm Approx. Press Height: 3500 mm Prodpfxovyr Eas An Iea Table Hole Diameter: 260 mm Table Size: 900 / 1200 mm Die Clamping Hole Diameter: 60 mm Slide Size: 470 / 900 mm Height from Floor to Table: 1000 mm Stroke Adjustment: 20 / 200 mm Strokes per Minute: 38 spm Motor Power: 30 + 2.2 kW Motor Speed: 1450 RPM Approx. Weight: 18,000 kg

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), ketinggian potong (maks.): 700 mm, lebar pemotongan (maks.): 1.100 mm, kecepatan pemotongan: 80 mm/menit, masa garansi: 24 bulan, PLACE OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS MECHANICAL – 12 MONTHS ELECTRICAL MAXIMUM ROUND DIAMETER: 700 MM MAXIMUM RECTANGULAR DIMENSIONS: 700 X 1100 MM MAXIMUM SQUARE DIMENSIONS: 700 X 700 MM Pjdpfxovzh Duo An Iera STANDARD MOTOR-DRIVEN BASE COLUMN TYPE SEMI-AUTOMATIC VARIABLE SPEED CONTROL PRECISION HEAD DESCENT SYSTEM PLEASE REQUEST A QUOTATION FOR FURTHER DETAILS.

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with mobile control panel * Lower roll positions easily read via two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending with bearing system * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile/pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending * Hydraulic lateral supports for large diameter bending * Ground and polished rolls for special applications * Profile bending rolls * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Predpow Slf Ujfx An Iea Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, daya: 4 kW (5,44 hp), PERALATAN STANDAR Badan las konstruksi baja Tiga rol digerakkan motor Poros dikeraskan dan digiling terbuat dari material kekuatan tinggi khusus Posisi kerja horizontal dan vertikal Rol standar yang telah dikeraskan Psdpfx Anow Smhwj Iora Panel kontrol bergerak terpisah dari bodi Pembatas samping manual mekanis bergerak dalam 3 arah Pembengkokan presisi dengan motor rem Indikator digital (2 unit) PERALATAN OPSIONAL Rol pembengkok pipa dan profil Penghenti samping hidrolik 2 sumbu opsional Otomatisasi dengan kontrol NC SPESIFIKASI TEKNIS Diameter poros atas: 60 mm Struktur poros bawah: 50 mm Diameter rol: 180 mm Kecepatan kerja: 6 m/menit Daya motor: 3,75 kW Panjang: 1200 mm Lebar: 850 mm Tinggi: 1200 mm Berat: 955 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 460 mm, diameter rol atas: 460 mm, diameter roll samping: 380 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 38,5 kW (52,35 hp), masa garansi: 12 bulan, STANDARD EQUIPMENT * Lower, upper, and side rolls are moved up and down by pistons hydraulically connected to the machine frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (3-roll drive system) * Positions of the rolls can be easily read with three digital displays * Easily removable bent workpiece thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with the movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC controller for automation * Top crane (elevator) for supporting large diameter bending * Hydraulic side supports for supporting large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system Prodpfx Ansxd S T Ue Ioa * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 300 t, panjang langkah: 60 mm, lebar meja: 400 mm, panjang meja: 4.200 mm, penyesuaian langkah: 100 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, tr-hu-5246848 Prodpfx Ajxrbn Ron Iea

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, lebar kerja: 3.100 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the frame * Protected against overload * The upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * The positions of the rolls can be easily read via three digital displays * Easy part removal with a hydraulically opening head and automatically rising shaft * Very easy operation with movable control panel * Welded steel construction body * Forged or rolled SAE 1050 (CK 50) steel shafts, induction-hardened * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 16/20 mm Bending : 20/25 mm Upper & Lower Roll : 380 mm Side Roll : 300 mm Motor Power : 31.5 kW Rolling Speed : 1.5 - 5 m/min Length : 5850 mm Prodpfx Anoxw Ecvo Iea Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), panjang langkah: 310 mm, kecepatan operasi: 8 mm/dtk, kecepatan mundur: 80 mm/dtk, tinggi meja: 985 mm, kedalaman tenggorokan: 510 mm, lebar kerja: 4.100 mm, gaya tekuk (maks.): 400 t, jarak antara penyangga: 3.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • 4-axis CNC (Y1, Y2, X, R) (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge system) • Narrow lower table (European type) • GIVI brand linear encoders • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies • Backgauge X-axis distance 1000 mm • AKAS or DSP laser light front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Pedpfx Anex Npale Isra Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Approach Speed (mm/sec) 100 Return Speed (mm/sec) 80 Press Speed (mm/sec) 8 Oil Tank (L) 400 Machine Weight (kg) 22500 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, lebar kerja: 4.000 mm, sudut pemotongan (min.): 0,5 °, sudut pemotongan (maks.): 3 °, laju langkah (min.): 12 rpm, ketebalan lembaran (maks.): 10 mm, ketebalan pelat baja (maks.): 10 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment (according to material type and thickness) Automatic stroke reduction feature (increases speed for short cuts) High-precision, stress-relieved steel frame Hardened guides and roller-type upper table movement system 1,000 mm CNC-controlled, motorized and programmable backgauge Backgauge features: - Programmable retract function - Lift-up function for long workpieces - ±0.1 mm positioning accuracy Ball transfer sheet support at front table Upper blade: 2 cutting edges / Lower blade: 4 cutting edges High-alloy steel blades Special knuckle joint system reduces maintenance needs Ruler, T-slotted and stop-fitted front support arms (1,000 mm) Cutting line illumination and shadow wire Front finger guard (flip-up type) Front and side safety guards Foot pedal Movable control lever Emergency stop buttons Safety equipment complying with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with return-to-operator feature) Angle-adjustable front squaring arm (0–180°) Front support arms with custom lengths Full-length flip-up front finger guard cover Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line Oil heater or oil cooler Automatic or manual centralized lubrication system Predpfx Anox Nqphe Ija Electrical cabinet with air conditioning system CNC-controlled front sheet support and feeding arms Custom throat depth (500 mm) Light-duty protective covers TECHNICAL SPECIFICATIONS (C 10 / 4000 MODEL) Cutting capacity (450 N/mm²): 10 mm Cutting capacity (700 N/mm²): 6 mm Cutting length: 4,000 mm Cutting angle: 0.5° – 3° (CNC controlled) Cutting stroke: Automatic adjustment Throat depth: 250 mm Backgauge travel (X-axis): 1,000 mm Cutting speed: 6 – 12 strokes/min Motor power: 22 kW Oil tank capacity: 300 liters Machine weight: ~16 tons Machine dimensions (LxWxH): approx. 5,790 x 3,650 x 2,580 mm

Kondisi: baru, Tahun pembuatan: 2025, panjang langkah: 300 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 95 mm/dtk, produsen pengendali: ESA - DELEM - Cybelec, lebar kerja: 3.100 mm, gaya tekuk (maks.): 100 t, jarak antara penyangga: 3.345 mm, jenis kontrol: Kontrol CNC, jumlah sumbu: 4, jenis aktuasi: listrik, BELT-DRIVEN SERVO CNC PRESS BRAKE Bending Capacity: 3100 mm / 100 Tons (E100 Model) STANDARD FEATURES - CNC controlled belt-driven servo press brake - Y1 – Y2 – X – R axes CNC controlled (4 axes) - CNC control unit (ESA S830 – 10” color touchscreen, 2D graphic display) - Automatic bending calculation and collision prevention functions - High-precision synchronized servo drive system - Belt-driven upper beam movement system, oil-free and low maintenance - Spring-supported upper beam design supporting energy recovery - O-frame construction for minimum deformation - 300 mm stroke - 410 mm throat depth - Servo motorized backgauge system (X + R axes) - Backgauge accuracy: ±0.03 mm - Backgauge travel distances: Prjdpfx Anox Nqukj Isa - X axis: 750 mm - R axis: 250 mm - Hardened ball screws and linear guides - 2 three-position backgauge fingers - European style upper die holder – quick-release (Promecam type) - European style narrow lower table - Standard upper die (H: 67 mm – 85° – R: 0.8 mm) - Standard lower die (60×60 mm – 4 V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) - High-precision optical linear scales - LED work area lighting - Sliding front support arms - Dual foot pedals - Emergency stop buttons - Safety equipment in accordance with CE standards OPTIONAL FEATURES - Additional backgauge axes (Z1 – Z2 – X5) - Backgauge travel increased to 1000 mm - Motorized crowning system - Hydraulic upper and lower die clamping systems - Front safety laser system (AKAS or DSP type) - Rear safety light barrier - CNC controlled sheet support arms - Laser bending line - Laser angle measurement system - Automatic angle measuring systems - Air-conditioned cooling system for electrical cabinet - Additional backgauge fingers - Custom die and table solutions TECHNICAL SPECIFICATIONS (E100 / 3100 MODEL) - Bending force: 100 tons - Bending length: 3100 mm - Distance between side frames: 3345 mm - Stroke: 300 mm - Throat depth: O-frame construction - Open height (between upper/lower jaws): 515 mm - Table height: 900 mm Speeds - Down speed: 95 mm/s - Bending speed: 10 mm/s (in compliance with CE) - Return speed: 95 mm/s Backgauge - X axis travel: 750 mm - R axis travel: 250 mm - X axis speed: 400 mm/s - R axis speed: 100 mm/s - Z axis speed: 600 mm/s General - Main motor power: 2 × 5.5 kW - Machine weight: approx. 7,500 kg - Machine dimensions (LxWxH): approx. 4600 × 2000 × 2650 mm

Kondisi: baru, Tahun pembuatan: 2024, Diameter pipa (maks.): 38 mm, Panjang pipa (maks.): 3.000 mm, Sudut pembengkokan (maks.): 190 °, radius pembengkokan (maks.): 200 mm, panjang total: 4.280 mm, lebar total: 1.000 mm, tinggi total: 1.500 mm, masa garansi: 12 bulan, tebal plat aluminium (maks.): 3 mm, ketebalan pelat baja (maks.): 3 mm, STANDART DONANIM • 3 Set Kalıp – (1 set silindir kalıp ve 2 set bükme kalıbı ya da istenilen ölçülerde 3 set bükme kalıbı) • 5 eksen servo kontrolü (Y, B, C, H, V) • Servo Motorlu Besleme Ekseni • Servo Motorlu Döndürme Ekseni • Servo Motorlu Bükme Ekseni • Servo Motorlu H, V Eksenleri • 21” TFT Dokunmatik Ekranlı Mobil CNC Kontrol Ünitesi • Sürgülü (Rolling) büküm yapabilme • 3D Büküm Simülasyonu • Çarpışma Simülasyonu • Günlük, Haftalık ve Aylık Toplam Çalışma Durumu Raporları • Çalışılan Malzeme Boyu Hesaplama • Tahmini Büküm Süresi Hesaplama • X-Y-Z'den Y-B-C'ye Dönüştürme • Acil Stoplu Mobil Ayak Pedalı • Uzaktan bağlantı desteği • Mandrelli - Mandrelsiz Büküm • Büküm Kafası Arkasında Emniyet Sacı • Hidrolik Sıkıştırma Psdpfxsu Hkb De An Iora • Hidrolik Mandrel • Hidrolik Destek • Hidrolik Lineer Sürgü Sistemi • Hidrolik Pençe Tip Bağlama • Elektrik Panosu Emniyet Kilidi ve Anahtarlı Kilit • Elektrik Sistem Soğutucu • Aşırı Yük Koruma • Ayrıntılı Çalışma Raporunun Otomatik Mail ile Gönderimi OPSİYONEL DONANIMLAR (Fiyata Dahil Değildir) • Ekstra Kalıp Setleri • Emniyet Halısı (750 x 1000mm) • Emniyet Halısı (1000 x 1500mm) • Hidrolik Yağ Isıtıcı • Ekstra Mandrel Boyu (6 mt’ye kadar) – her metre için • Bilyalı Mandrel ve Sıyırıcı Kalıp • Otomatik Mandrel Yağlama Sistemi (uygun boru çapları için) • Hidrolik Yağ Soğutucu TEKNİK ÖZELLİKLER KAPASİTE MB-38 CNC/5 EKSEN Maks. Kapasite mm Ø38x3mm Maks. Bükme Yarıçapı mm 250mm Maks. Bükme Açısı ° 190° Hidrolik Basınç bar 50-200 Çalışma Boyu mm 3000 Dönme Toleransı ±0,1 Bükme Hızı kw Ayarlanabilir UxGxY mm 5500x1300x1600 Ağırlık kg 2250

Kondisi: baru, Tahun pembuatan: 2024, Diameter pipa (maks.): 60 mm, daya: 2,2 kW (2,99 hp), masa garansi: 12 bulan, kecepatan operasi: 45.000 mm/dtk, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 12 MONTHS Standard Equipment Self-memory NC Control panel provides professional and easy operation of the machine Capable of bending pipes up to Ø60mm x 4 mm Clamp fixture supports the pipe during fixation to the machine Pre-drilled holes for mounting special fixtures Welded steel construction body Thermal, power, and reset indicator lights Emergency stop button Machine has internal memory for 500 programs Minimum bending radius is 3 times the pipe diameter (Ø), depending on wall thickness and material Ø33.7 mm Standard 1 set of pipe dies included User manual MODEL NBM 60 Minimum Diameter mm 80 Maximum Diameter mm 320 Working Speed m/sec 3 Motor Power kW 2 Weight kg 250 Dimensions (L x W x H) 750 x 850 x 1050 Pjdpfevkua Uox An Ijra Bending Capacity NBM 60 Heavy-Walled Pipe mm 60×4 Black Steel Pipe mm 48×4 Aluminum Pipe mm 60×8 Solid Round Bar (Black Steel) mm 40 Square Pipe (Black Steel) mm 40x40x4

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, lebar meja: 700 mm, panjang meja: 880 mm, tinggi meja: 850 mm, lubang tembus di meja: 200 mm, penyesuaian silinder hidrolik: 85 mm, penyesuaian langkah: 110 mm, Perlengkapan: penghadang cahaya keselamatan, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief for frame and welded parts via vibration - Table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide (ram) with 8-way guide - Ram with cushioning cylinder - Steel cast parts for ram, connecting rod, and slide block – GS52 - High strength, solid one-piece crankshaft – 4140 - Bronze connecting rod bearing (Zr14) - Rear flywheel - Spare bolster plate - Hydraulic overload protection - Motorized slide adjustment - Automatic central lubrication - Pneumatic pedal with latch and dual-hand control with time delay - Electrical counter - PLC application with touchscreen – DELTA - Electrical switchgear – SIEMENS-SCHNEIDER - CE compliance – OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls entire electrical system, valves, double-hand and pedal) – PILZ - Dual coil safety valve – GPA, TOPAIR Pedpjvxhprefx An Iora - Interlock position switch and control panel - Safety block - Protective guards in accordance with CE requirements TYPE D-TYPE MONOBLOCK FRAME Capacity 100 Ton Distance Between Table and Slide 450 mm Distance Between Side Frames 960 mm Slide Adjustment 85 mm Approximate Width 1230 mm Approximate Depth 1650 mm Approximate Height 2500 mm Bolster Hole Diameter 200 mm Bolster Size 700 / 880 mm Die Fastening Slot Diameter 50 mm Ram Size 245 / 410 mm Bed Height from Floor 850 mm Stroke Adjustment 10 / 110 mm Strokes per Minute 50 spm Motor Power 11 kW Motor Speed 1450 rpm Approximate Weight 7,500 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 600 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.200 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press that operates with force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety in large table and heavy die applications, thanks to their rigid frame structures. The CRONOSSTECH CEHP 600 – H Type Eccentric Press 600 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it ensures reliable performance for continuous production conditions. Key advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection via hydraulic overload protection - Precise guidance with 8-point guided ram + balancer piston - Controlled, user-friendly operation via PLC + touch screen - High operator safety with light curtain protection Prjdpfxjx N R A Uo An Ija Areas of use - Punching/cutting/forming applications requiring large table size - Mass production with automated feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch brake • T-slotted additional base plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on the ram • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain protection • Gear group in a sealed oil chamber • Double coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover for table front • Custom-designed dies as required ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Capacity: 600 Ton Table–Ram Distance: 500 mm Housing Width: 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Dimension: 2200×1200 mm Ram face size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales operations are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 200 mm, lebar meja: 1.000 mm, panjang meja: 1.400 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press that operates through a crank mechanism, generating force for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structures. The CRONOSSTECH CEHP-TB-300 – H-Type Eccentric Press 300 Ton is engineered for high-volume production with a focus on stable operation, die protection, and operator safety. Its monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suitable for continuous production. Key Advantages: - 1400×1000 mm table size for stable operation with large dies - Die/equipment protection with hydraulic overload safety - Controlled, user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection - Low maintenance requirement thanks to automatic lubrication Applications: - Punching / cutting / die forming applications - Mass production with automatic feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel welded frame • Pneumatic clutch-brake unit • Additional plate with T-slots • 8-point guided slide • Adjustable stroke with single connecting rod • Counterbalance piston in slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse function • Hydraulic overload protection • Motorized slide adjustment system • Light curtain safety guard • Enclosed gear unit with oil bath • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material evacuation systems • Sliding safety guard in front of the table • Custom dies upon request ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-300) Capacity: 300 Ton Table-Ram Distance: 500 mm Housing Width: 1430 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 2550 mm Press Height: 4700 mm Table Dimension: 1400×1000 mm Ram Face Size: 1400×1000 mm Stroke (Fixed): 200 mm Prodox N Sdmopfx An Isa Motor Power: 45 kW Weight: 35,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 175 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to its 8-gib H-frame structure, maximum rigidity is achieved during the pressing operation, and the parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke. The CHSP 500/175 model, featuring a 500-ton main ram and a 175-ton blankholder ram (cushion) capacity, is designed to provide full control over the die and workpiece in high-tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration, ensuring long life and dependable operation. ⚙️ Standard Equipment Prsdpfx Anjx N Uhuj Isa - Steel construction, 8-gib H-frame press design - Stress-relieved frame structure by vibration - Bronze Zr14 gib guides - Welding applications approved with WPQR and WPS certificates accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8-gib H-frame press design Frame Material: St52 – ERDEMİR Gib Guides: Bronze Zr14 Capacity (Ram): 500 Ton Capacity (Cushion): 175 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Die Space: 100 mm Max. Die Space: 1100 mm Stress Relief: Vibration stress relief Welding Applications: WPQR and WPS certified, TÜRK-AK accredited, EN ISO 15614-1/2017 (Welding applications supervised by "welding coordination engineers" certified under EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Cushion Cylinder Inner Diameter: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 800 mm, lebar meja: 1.000 mm, panjang meja: 1.000 mm, jarak antara tiang: 1.000 mm, gaya penarikan balik: 100 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 300 / 100 TON COLUMN-TYPE HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 300 / 100 ton column-type hydraulic drawing press is a high-rigidity, four-column hydraulic press solution developed for metal forming, deep drawing, and precision pressing applications. Pjdpfx Anjx N Unze Iera The St52 grade welded steel frame is stress-relieved by vibration, ensuring parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke during pressing. The ram and cushion systems operate independently and feature precise stroke and tonnage adjustments via a touchscreen control panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-based control, this press offers high efficiency and reliable operation. Automatic lubrication and electronic filter contamination alerts reduce maintenance requirements to a minimum. With a capacity of 300 / 100 tons, this model is an ideal industrial press solution for medium and high tonnage metal forming, deep drawing, and die applications. Key Advantages - High-rigidity 4-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High accuracy and repeatability - Long-lasting, low-maintenance design Areas of Application - Metal forming applications - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4-Column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. Induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 300 Tons CAPACITY (CUSHION): 100 Tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m. PERPENDICULARITY TOLERANCE: 60 micron/m. STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELD STRESS RELIEF: Vibratory stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVABLE TABLE FAST APPROACH SPEED: 150 mm/s DRAWING SPEED: 12 mm/s RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 390 mm – Ck45 CUSHION CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 18 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, jenis kontrol: Kontrol NC, tingkat otomatisasi: otomatis, jenis aktuasi: mekanis, lebar kerja: 2.060 mm, sudut pemotongan (min.): 1,3 °, laju langkah (min.): 41 rpm, ketebalan lembaran (maks.): 4 mm, ketebalan pelat baja (maks.): 4 mm, penyesuaian pengukur belakang: digerakkan oleh motor, penahan belakang: 750 mm, daya: 7,5 kW (10,20 hp), masa garansi: 12 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perlindungan jari, Standard Features ELGO P40T CNC control unit Robust, welded monolithic frame construction for maximum cutting precision NC-controlled, motorized 750 mm backgauge system Top blade with 2 cutting edges, bottom blade with 4 cutting edges, manufactured from high alloy steel Mechanical hold-down device to prevent sheet slippage during cutting Easily adjustable blade gap setting mechanism Ball transfer front table Front support arms with scale and stops Cutting line illumination system Finger guard safety system Foot pedal Rear safety cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sliding system for convenient sheet handling and transfer to the rear System to allow cut pieces to drop to the front Front angle gauge adjustable 0–180° Front support arms available in custom lengths Manual 750 mm backgauge, frontrally adjustable with handwheel Prsdsyg Id Ajpfx An Ija Rear safety light barrier Technical Specifications Machine Type: A04/2060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 2060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Depth (C): 800 mm Machine Dimensions (L × W × H): 2600 × 2250 × 1400 mm Motor Power: 7.5 kW Weight: 3,000 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, lebar meja: 850 mm, panjang meja: 1.150 mm, lubang tembus di meja: 240 mm, penyesuaian silinder hidrolik: 150 mm, penyesuaian langkah: 160 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration applied to main body and welded components Pedpfx Ansvyr D Aj Ijra - Table parallelism and perpendicularity tolerances conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide guided by 8-way gibs - Ram with cushioning cylinder - Ram, connecting rod, and clutch parts, made of cast steel, GS52 - High-strength monobloc crankshaft – 4140 - Bronze bushings inside connecting rods (Zr14) - Rear flywheel - Spare bolster plate - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication system - Pneumatic pedal with interlock and dual-hand control with timer - Electric counter - PLC control and touchscreen panel – DELTA - Electrical switchgear by SIEMENS-SCHNEIDER - CE conformity – OPTIONAL - Safety light curtains for finger protection – SICK, LEUZE - Safety PLC (controls all electric system, valves, double-hand and pedal) – PILZ - Double-coil safety valve – GPA, TOPAIR - Locked position limit switch and main panel - Safety block - Protective guards in compliance with CE standards MODEL: D-TYPE MONOBLOCK FRAME Capacity: 250 Ton Shut Height (Ram to Table Distance): 520 mm Clearance Between Side Frames: 1230 mm Ram Adjustment: 150 mm Approximate Width: 1600 mm Approximate Depth: 2100 mm Approximate Height: 3400 mm Table Bore Diameter: 240 mm Table Dimensions: 850 x 1150 mm Die Clamping Slot Diameter: 60 mm Ram Dimensions: 470 x 900 mm Table Height from Floor: 950 mm Stroke Adjustment: 20 – 160 mm Strokes per Minute: 40 spm Main Motor Power: 22 + 2.2 kW Motor Speed: 1450 rpm Approximate Weight: 16,000 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 9 mm, berat keseluruhan: 5.400 kg, STANDART EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by motor - Hydraulic up-down movement for rear and bottom rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top rolls driven by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - Operating manual OPTIONAL EQUIPMENT - Top crane (elevator) for support in large diameter bending - Hydraulic side supports for support in large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Predpfow Slbvjx An Isa Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending round and various diameter materials Bottom and side rolls move vertically via direct hydraulic linear motion Protected against overload Top roll powered by electric motor and planetary gearbox. Bottom roll powered via cardan coupling system. Two rolls are driven Roll positions are easily readable with three digital displays Rolled parts can be easily removed thanks to the hydraulically operated drop-end Very easy to operate with mobile control panel Welded steel construction frame SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Prodpfx Anjw Slkkj Ioa Conical bending system Hydraulic balancing system for parallel roll movement Conforms to EU safety standards and CE marked User manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) support for large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Dual speed adjustment system Stepless speed adjustment Hydromotor driven rotation Discharge/extractor system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, panjang rol: 4.100 mm, ketebalan lembaran (maks.): 16 mm, STANDARD EQUIPMENT * The lower and side rolls are moved up and down linearly by pistons hydraulically connected to the frame * Protected against overloading * The upper and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls can be easily read via three digital indicators * The hydraulically opening head and automatically lifting shaft allow for easy removal of the bent workpiece * Very easy operation with the movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC automation controls * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic plate release system * Induction hardened and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) Prjdpfew Smc Iex An Ioa TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2250 mm Height: 2350 mm Weight: 22,000 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, lebar kerja: 2.550 mm, ketebalan lembaran (maks.): 40 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * Lower, upper, and side rolls are operated by hydraulic cylinders attached to the frame, enabling precise up and down linear movement * Protected against overload * Upper and side rolls are driven by hydromotor and planetary reducer (all three rolls are motor-driven) * The position of the rolls can be easily read with three digital displays * Hydraulic opening head and automatic lifting shaft allow easy removal of the bent workpiece * Very user-friendly operation with movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic synchronization system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) support for large diameter bending * Hydraulic lateral supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) Predoxw Ebxepfx An Ija TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17800 kg