Beli Pemrosesan Format & Mach Tepi Banding bekas (28.569)

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Dcodpfx Agov Sv Ene Djg Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Kondisi: bekas, Vertical Bandsaw PEHAKA Type SM 4 Serial No. 27060 Year of manufacture approx. 1980 Throat Depth 380 mm Table size 620 x 480 mm Dsdpeiv A U Esfx Ag Decg Cutting height 250 mm Wheel diameter 400 mm Working height 1120 mm Saw blade length min. 2900 - max. 3100 mm Saw blade speed 22-125 m/min, steplessly adjustable Motor power 0.6 / 0.75 kW Power supply 380 Volt, 50 Hz - Stepless saw blade speed via variable belt drive with lever adjustment and 2 motor speeds - Saw table tiltable +/- 15° - Blade butt welding machine IDEAL BS 0-16 - Blade shear - Base made of U-steel 100 x 50 mm, movable with pallet truck Space requirement L x W x H 1050 x 800 x 1950 mm Weight 355 kg In good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Working width 1300 mm Workpiece height – max. 3 – 140 mm Control system Xinje XD5 Part length – min./max. 200 – mm Total connected load 13.4 kW Machine weight approx. 4.5 t Space requirements approx. 5.1 x 2 x 2.3 m This brush sanding machine is in very good condition, immediately available, and can be inspected under power at the seller’s location. Dcjdpoylp A Dofx Ag Djg DESCRIPTION: - Minimum part length: 200 mm - The machine is designed for sanding flat individual components such as kitchen cabinets, windows, doors, furniture, etc. - Modular control system for the module units to meet customer requirements. - Frequency converter for speed control of the motors on each module unit. - Each unit can be easily pulled out for maintenance and for changing sanding paper and brushes. - Automatically adjustable working height (3–140 mm) via the control system - Oscillating compressed air at the end section Additional information: - Ball bearings, drive belts, and chains for the brush drives were replaced in June 2025

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tinggi pelat: 50 mm, Dari pembubaran perusahaan Tipe IMA Compact 309 C Tahun pembuatan 1992 Untuk bahan gulungan dan list hingga ketebalan 9 mm - Pengeleman dengan lem hot melt butiran - Pemotongan ujung Dsdpfx Aox Avcdjg Djcg - Penggergajian - Milling rata - Pengikisan dan penghalusan Pembayaran tunai saat pengambilan. Penjualan pribadi – tanpa garansi.

Tahun pembuatan: 1976, Kondisi: siap digunakan (bekas), I am selling a tenoning machine for parallel milling of grooves for pallet slats, etc. WACO T2-SL Djdpfx Ash Hp U Seg Dscg Year of manufacture: 1984 Groove width: 30 mm Motor: 3.3 kW Made in Germany. Available immediately. Comes with documentation.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, I am selling a combined machine, sliding table saw with scorer + spindle moulder. Manufacturer: FELDER Austria Model: KF700S Year of manufacture: 2011 Cutting length: 3200 mm Saw blade and spindle moulder tilt 0-45°, manual Saw blade and spindle moulder height adjustment: digital Digital display for fence and working heights Main saw blade and scorer activated from the aluminium sliding table. Main motor, sliding table saw: 3.0 kW (3200/4500/5800 rpm adjustable) Scorer motor, sliding table saw: 0.75 kW Main motor, spindle moulder: 5.5 kW Dcedpfxer Alzpe Ag Deg Tools, options, and accessories shown in the pictures are included in the price. Very good condition. Available immediately. Includes full documentation and CE certificate.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, voll-ausgestattete-kantenanleimmaschine-brandt-kdf-230-airtec-20 17 Dedpfoythxmox Ag Docg

Kondisi: baik (bekas), Pehaka-VHBA-320 Dcodpfxjhwxb To Ag Deg

Kondisi: bekas, Tahun pembuatan: 2008, Mesin bekas Tahun pembuatan: 2008 Dcedpfow Nadgex Ag Dsg Kondisi: saat ini masih berproduksi Perlengkapan dan data teknis: Perekat maksimal 8-55 mm Termasuk panel kontrol yang dapat diputar Unit penyambungan HF, 2 motor Termasuk bak pemanas cepat yang dapat diganti, berlapis teflon Termasuk posisi rol penekan secara elektronik Termasuk unit gergaji potong ganda yang dapat diputar Termasuk unit frais penyerut pinggiran Termasuk unit fase, radius, dan copy sudut yang dikontrol penggunaan dengan paket nesting Termasuk scraper radius dengan paket nesting Termasuk scraper permukaan Termasuk unit alur Termasuk unit polisher Termasuk unit semprotan Ketersediaan: dalam waktu singkat Lokasi stok: Flörsheim

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, daya: 3,6 kW (4,89 hp), tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), ketebalan tepi (maks.): 3 mm, jenis penyesuaian ketinggian: mekanis, berat keseluruhan: 11 kg, sambungan udara terkompresi: 6 batang, tinggi kerja: 65 mm, The perfect invisible joint - For laser edges / hot-air edges / co-extruded edges - Up to 65 mm edge height - Up to 3 mm edge thickness Dedpfx Aer H Ealjg Decg - Mobile or stationary use - Tool-free conversion - Up to 3 mm edge thickness - Approx. 4 min heating time - 230 V / 50 Hz

Tahun pembuatan: 1997, Kondisi: bekas, Maszyna do krojenia taśmowego Dedpfx Agex Hvcuj Dscg Ta krajalnica z przedłużonym przenośnikiem taśmowym została zaprojektowana specjalnie do krojenia warzyw oraz owoców. Dzięki szerokiemu wyborowi wymiennych narzędzi tnących, urządzenie umożliwia krojenie w plastry, słupki oraz kostkę. Dostępne są również specjalne noże przeznaczone do szarpania mięsa na włókna. Maszyna cechuje się dużą wszechstronnością i nadaje się do krojenia sałaty, warzyw liściastych i nieliściastych, owoców, ziół, mięsa, ryb, wędlin, pieczywa, sera, orzechów i innych produktów. Idealnie sprawdza się w gastronomii, firmach cateringowych, sklepach ze świeżą żywnością oraz w przemyśle spożywczym. Szeroka gama akcesoriów tnących pozwala dostosować maszynę do różnorodnych zastosowań. Intuicyjny panel sterowania zapewnia szybką i łatwą zmianę produktów. Zarówno prędkość taśmy, jak i obroty noży są płynnie regulowane (sterowanie częstotliwościowe), co gwarantuje precyzyjne i delikatne cięcie nawet w przypadku delikatnych produktów. Konstrukcja w całości wykonana ze stali nierdzewnej gwarantuje najwyższy poziom higieny i trwałości.

Kondisi: bekas, Tahun pembuatan: 2010, de Dsdpfx Ajw I H Rkeg Dscg

Kondisi: bekas, Head- und Tail-Bandmaschine mit Gaze-Station Kolbus HL Djdpfx Aov Ay Arog Docg Baujahr: 1970 Format / Größe: min. 125 x 100 x 6 mm / max. 370 x 270 x 80 mm Leistung: bis zu 36 Takte/min. Bestehend aus: 1) Anleimstation 2) Kapitalband- und Hinterklebestation 3) Andruckstation Online-Video-Besichtigung per WhatsApp - MS Zoom - Telegram Lagerort: Emskirchen/Nürnberg - Sofort verfügbar - Vorführbereit

Kondisi: sangat baik (bekas), Stainless steel design, length: 1400 mm, width: 1200 mm, height: 1900 mm, weight: approx. 250 kg Dcjdpfxshvyzwj Ag Deg

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: 15005225, Automatischer Banderolierautomat – Automatic Banding Machine HIMA BA 30/800 Year of construction: 10/2004 – Serial No. 15005.225 Suitable for coated kraft paper or plastic film Technical specifications: - Output: up to 23 cycles/min - Banded product width: 30 – 310 mm - Stack height: 3 – 200 mm - Band width: 30 mm Cycle release: – Manual/start button – Foot switch – Automatic mode button Online video inspection possible via Skype. We would be pleased to welcome you for a visit – further machines in stock. Dedpfxsn Aw Ucs Ag Docg Available immediately – inspection possible Located in Emskirchen / Nuremberg – ready for testing.

Kondisi: sangat baik (bekas), Dengan perlengkapan tambahan 2,2 kW dengan aksesori Dcsdpfxjxfu Nue Ag Djg Tinggi sekitar 217 cm

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, - Leistung (kW): KFB 353 = 1,5 - Spannung (V): 400 - Luftdruck (bar): 7 - Luftverbrauch (l/min): min. 250 - Drehzahl Spindel (min⁻¹): KFB 353 = 12.000 - Maximale Werkstückquerschnitt B x H (mm): 190 x 111 - Fräsbereich L x B (mm): 300 x 130 Dcodpfx Agjwzivdo Deg - Frästiefe (mm): 200 - Maschinenabmessungen L x T x H (mm): 3.500 x 820 x 1.650 - Gewicht (kg): ca. 420 - Bearbeitbare Materialien: KFB 353 = PVC- und Aluminiumprofile

Kondisi: baik (bekas), Alber sharpening machine for bandsaw blades Dedpfjglui Aox Ag Docg Blade width: 50 - 206 mm Tooth pitch: 20 - 50 mm

Kondisi: sangat baik (bekas), Fully automatic band saw leveling machine Dcedpfx Aod Sr Sisg Djg Oppliger Type PBS 860

Kondisi: baru, Tahun pembuatan: 2026, Horizontal metal-cutting band saw with a swiveling arm, designed for cutting metals, allows for cuts perpendicular to the axis of the material as well as at any angle from 0 to 60º. The material can be fed manually or by any mechanical feeder, with automatic tool feed. The blade guides feature dedicated carbide plates and bearings, which have a significant impact on blade guidance, durability, straightness of cut, and overall cutting precision and quality. The machine arm is made from profiled CAST IRON. The control panel is mounted on the arm. Power from the electric motor is transferred to the drive wheel of the cutting band via a geared worm drive. The cutting blade is tensioned over two cast iron wheels using a manual tensioner and is guided by an adjustable rolling and linear carbide guide set. Inside, there is a separate coolant tank with an electric pump. The arm downfeed speed (cutting speed) is controlled by a hydraulic cylinder, and feed rate is regulated from the control panel. Two blade speeds are available: 36 and 72 m/min. When the arm is in the idle position (after cutting), the band drive motor is automatically switched off. Safety is ensured by the blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any guard is opened; additional protection is provided by automatic shutoff of the band saw in case of blade breakage. Technical Data Band saw dimensions 2455×27×0.9 mm Blade tension manual (mechanical) Blade speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm descent control stepless – hydraulic cylinder Vise base height 900 mm Power supply 3-phase 400 V Motor power 1.1 kW Net/Gross weight 220 kg / 284 kg Warranty 12 months Manual operation yes CE Declaration yes Cutting capacities [circle / rectangle / square]: Angle | Round (ø) | Rectangle | Square 0º | ø230 | 260×150 mm | 225×225 mm 45º | ø165 | 180×130 mm | 165×165 mm 60º | ø105 | 100×90 mm | 110×110 mm Dedpfx Agevuf S Nj Dscg *Please note: The machine is supplied by default without a CEE power connector as there are various types available. If you wish to receive a specific connector type with your machine, please contact the seller before or at the time of order.*

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1980, Band saw machine Manufacturer: KÖLLE Model: ST 105, Year: approx. 1980 Throat depth: 1050 mm Dsdemp Trwspfx Ag Djcg Equipped with IDEAL saw blade welding device. Infinitely variable speed control. Machine in ready-to-use condition.

Kondisi: baik (bekas), Tahun pembuatan: 1992, JAESPA bandsawing machine, model W400 AZ Control: Minipos 807, Year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total connected load: 4 kW Approx. weight: 2500 kg Dcjdpfogf H Saox Ag Dog Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Space requirements: 2.8 x 2.8 x 2 m

Kondisi: baru, Tahun pembuatan: 2026, A powerful, large metal band saw with a swiveling arm, enabling cutting perpendicular to the axis of the material as well as at any angle from -45° to the left up to 60° to the right. This band saw is ideal for cutting pipes, profiles, and solid materials. Product characteristics: The material to be cut can be fed manually or by any mechanical device, while the feed motion of the tool is automatic. The desired cutting speed – the band feed rate – is controlled via the control panel. The robust arm is made of profiled cast iron. Power is transmitted from the electric motor to the drive wheel by a maintenance-free worm gear unit. The saw blade is tensioned between two cast iron wheels using a manual tensioner and guided by adjustable carbide ball and sliding guides. The base is constructed as a rigid welded steel sheet body. Inside, there is a separate coolant tank with an electric pump. The configuration of the top part of the base forms a tray for coolant drainage and chip collection during cutting. The work table, featuring a double-sided swiveling arm from -45° to +60°, is mounted to the cast iron frame base. The control panel is mounted on a separate arm. In the cutting process, the main cutting movement is the saw band feed. The arm descent (cutting speed) is regulated by a hydraulic cylinder. The feed speed is controlled from the saw’s control panel. Two band speeds are available: 36 or 72 m/min. After the cut is completed and the arm reaches its lower position, the saw blade drive switches off automatically. Safety is assured by blade guards and micro-switches that stop the motor after the cutting cycle or upon opening any guard. Additional protection automatically shuts off the saw in case of blade breakage. Technical specifications: Saw blade size [mm]: 2715 x 27 x 0.9 Blade tension: mechanical (manual) Blade speeds [m/min]: 36, 72 Dodpsi D Ddiefx Ag Decg Arm descent control: stepless – hydraulic cylinder Vice base height [mm]: 765 Minimum clamping length [mm]: 100 Power supply: 3-phase 400V Total power [kW]: S1 100%: 1.5; S6 40%: 2.1 Coolant pump motor power [kW]: 0.025 Weight [kg]: 370 Warranty [months]: 12 Manual (DTR): Polish language CE Declaration: yes Cutting capacity: Angle | Round (ø) | Rectangle (max) | Square (max) 0° | ø250 | 310 x 210 | 240 x 240 45° R | ø200 | 200 x 140 | 180 x 180 45° L | ø165 | 185 x 145 | 160 x 160 60° R | ø120 | 120 x 95 | 100 x 100 The listed price is NET, excluding shipping costs. For more information, please contact us by phone or email. We invite you to browse our full offer on our website.

Kondisi: baru, Tahun pembuatan: 2026, DE-CORMAK_HBS260_Bandsäge zum Schneiden von Rohren, Profilen und Stangen wird in allen Schlosserwerkstätten eingesetzt, in denen Präzision, Qualität und Schnittgeschwindigkeit entscheidend sind. Das Modell verfügt über einen 0-60° schwenkbaren Sägebügel. Das stabile Gestell gewährleistet präzisen und geräuscharmen Betrieb. Herausnehmbarer Spänebehälter für eine einfache Reinigung! Maschineneigenschaften Der horizontale Metallbandschneider mit schwenkbarem Arm ermöglicht das Sägen sowohl rechtwinklig als auch in jedem Winkel von 0 bis 60° zur Achse des Werkstücks. Das Material wird manuell oder durch ein mechanisches Fördergerät zugeführt, der Werkzeugvorschub erfolgt automatisch. Die Bandführungen sind mit speziellen Hartmetallplatten und Wälzlagern ausgestattet, was die Bandführung, Lebensdauer, Geradheit sowie Schnittqualität maßgeblich verbessert. Die Hartmetallführung reduziert den Verschleiß von Maschine und Bandsäge erheblich. Ausgerüstet mit leistungsstarker Kühlmittelpumpe und geschlossenem Kühlkreislauf. Der aus einteiligem Guss gefertigte Bügel garantiert zusammen mit dem 27 mm breiten Sägeblatt eine zuverlässige Serienbearbeitung von Profilen und Vollmaterialien. Der Schraubstock ist in einem verstellbaren Bett und mit Schnellspannvorrichtung ausgestattet. Die Bandführungen bestehen aus Hartmetallplatten (gesinterte Hartstoffe) und einem Wälzlagerführungssystem. Entscheidend für Präzision und Geradheit ist die ZENTRIERTE HARTMETALLFÜHRUNG. Die Oberseite des Maschinensockels bildet eine Wanne zum Auffangen von Kühlmittel und Spänen. Ein Gusstisch mit Schwenkarm und separatem Bedienfeld ist am Sockel angebracht. Beim Sägen sorgt die Bewegung des Bandes und das Absenken des Arms für den Schnitt. Die Absenkgeschwindigkeit (Schnittfortschritt) wird durch einen Hydraulikzylinder geregelt. Die Vorschubgeschwindigkeit ist über das Bedienfeld stufenlos einstellbar. Zwei Schnittgeschwindigkeiten wählbar: 35 und 70 m/min. Nach Beendigung des Schnitts schaltet der Antrieb im unteren Endpunkt automatisch ab. Sicherheit gewährleisten Bandabdeckungen und Mikroschalter, die den Motor nach Zyklusende oder bei Öffnen der Abdeckungen stoppen. Der Bandsägenantrieb wird zudem bei Bandbruch automatisch abgeschaltet. Bandsägeblattmaße [mm]: 2520 x 27 x 0,9 Bandspannung: mechanisch (manuell) Bandgeschwindigkeiten [m/min]: 35, 70 Absenkung: stufenlos/hydraulisch Schraubstockhöhe [mm]: 860 Sägeraddurchmesser [mm]: 300 Rahmenschwenkung [°]: 0-60 Dcodpfemrnk Ejx Ag Deg Spannung: 3~400V Hauptmotorleistung [kW]: 1,1/1,5 Kühlmittelpumpe [kW]: 0,05 Außenmaße [cm]: 150x80x140 Gewicht brutto/netto [kg]: 210 / 180 *Bitte beachten Sie: Die Maschine wird standardmäßig ohne CEE-Stecker geliefert, da es verschiedene Typen gibt. Wenn Sie einen Stecker benötigen, teilen Sie dies dem Verkäufer bitte vor dem Kauf/direkt bei Auftragserteilung mit. Preise sind Nettopreise. Die Versandkosten sind nicht enthalten. Für weitere Informationen kontaktieren Sie uns gerne telefonisch oder per E-Mail. Unser gesamtes Angebot finden Sie auf unserer Website.

Kondisi: baru, Tahun pembuatan: 2026, PREMIUM LINE Series Machine. Cormak S200R Manual Bandsaw designed for industrial applications. This metal-cutting bandsaw offers high cutting accuracy, thanks to a robust cast iron rotary table synchronized with the swiveling arm. This bandsaw is suitable for large industrial plants, capable of operating for up to 16 hours out of 24. It allows miter cutting from -45º left up to 60º right. Machine Features The CORMAK S-200 R MANUAL bandsaw, CE-certified, enables perpendicular cuts to the axis of the workpiece or mitre cuts at any angle from -45 to +60 degrees. The material can be fed manually or with any type of feeding device. During cutting, the arm descends gravitation-ally via oil flow in a dual-chamber hydraulic cylinder. The descent speed is regulated by a valve that controls oil flow between chambers. The operator starts the machine by pressing the start button and sets the cutting speed. After the cut is completed, the machine stops automatically and the operator manually raises the arm to the start position. Material feeding is manual. The vise is mounted on an adjustable bed and features a quick-clamping system. The blade guides use carbide inserts and rolling bearings. These CARBIDE INSERT GUIDES are key for precision and straightness of the cut. The arm is equipped with an automatic blade tension sensor and is inclined at 25 degrees, which increases blade life. A cleaning brush is mounted at the bottom of the arm for optimal blade performance and cleanliness. The machine drive transmits via an oil-filled worm gearbox. It is powered by a three-phase dual-winding motor with two cutting speeds. Motor thermal protection. The machine provides two blade speeds: 35 and 70 m/min. Construction: the arm, vise, and rotary table are all cast iron components. Closed-loop coolant system. The machine is equipped with a length stop with a ruler for setting the cut length. The machine base is a rigid steel box section housing the coolant reservoir and coolant pump. Cutting safety is ensured by an electrical system that meets all CE requirements. The machine features a limit switch that stops the machine after the cutting process, an emergency stop ("mushroom"), and several micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Technical Data TYPE: Gravity ARM LIFTING/DESCENDING: gravity with smooth descent adjustment Djdpfx Agefy Ttie Djcg BLADE SPEED: 36/70 m/min MITER CUTTING: 45° left to 60° right VISE: manual MINIMUM CUTTING DIAMETER: Ø 5 mm MINIMUM MATERIAL LENGTH IN VISE: 30 mm VISE BED HEIGHT: 890 mm BLADE: 27x0.9x2910 mm TOTAL POWER: 2.1 kW DIMENSIONS (LxWxH): 1600 x 800 x 1400 mm WEIGHT: 500 kg Max. Cutting Capacity [mm] Angle 0º ø250 320 x 240 240 x 240 45º L ø200 220 x 120 190 x 190 45º R ø220 235 x 120 210 x 210 60º R ø110 155 x 110 100 x 100 For more information, we invite you to visit our website.