Beli Richard Hess Mbv Gmbh Mesin Uji Tarik-Mesin Uji Universal bekas (110.836)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Classic universal lathe T6 in Howaldt version. Solid, reliable workshop machine for daily use—in high demand in this segment because it handles tasks beyond the capabilities of smaller hobby machines. Equipped with a three-jaw chuck, tailstock quill is precise, bed shows typical signs of use, but no scoring that would affect accuracy. Suitable for metalworking shops, mechanics, automotive restoration, and general mechanical repair. Wiring diagram and feed/threading chart on the headstock still legible. Technical data: - Model: T6-HOWALDT (T) - Gear stages: 4 x 4 speed ranges (45/65/90/130 / 170/240/340/500 / 650/900/1300/1800 rpm) - Thread types: metric / inch / module - Spindle bore: approx. 38–52 mm (verify on-site) Bwedszabhnepfx Am Tsn - Drive: three-phase 400 V - Control box: Original with speed/feed chart - Inventory number: 5001 (available) Collection / Transport: Pickup with forklift (from 3 t) or truck with loading crane. On-site loading possible. Shipping by freight forwarder upon agreement.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi teknis yang baik, dapat dicoba, sistem kontrol Siemens Sinumerik 840D. Dimensi palet: 500x630 mm Pergerakan sumbu X / Y / Z: 1 - 60.000 mm/menit Magasin alat: 60 buah Parameter: Sumbu X: 800 mm Sumbu Z: 800 mm Bwodpsx A Ewkefx Am Tsn Sumbu Y: 800 mm Berat benda kerja maks.: 800 kg Kepala spindle: HSK 80 A Diameter alat: 95 mm Berat mesin: 12.000 kg Dimensi (P x L x T): 8000x4900x3800 mm

Kondisi: bekas, Universal Swivel-Tilt-Rotary Table DECKEL Universal tool milling machine accessory table suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate horizontally rotatable to the right and left up to 45 degrees with scale - Tiltable to/from the machine +/- 15 degrees - Swiveling +/- 15 degrees - Swivel table, tilt table, angle table Permissible load max. 1000kg Weight: 400kg Bwodpfxed E A I Ne Am Tsn Good condition

Kondisi: bekas, Universal tool milling machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 path control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently only rarely used in the in-house workshop of an electronics company. Travel paths X: 700 mm, Y: 450 mm, Z: 500 mm Table size 1050 x 627 mm Spindle taper ISO 40 Spindle speed 40–2000 rpm, 18 steps Feed rate X, Z axes: 10–500 mm/min, stepless Feed rate Y axis: 5–250 mm/min, stepless Rapid traverse X, Z axes: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill travel vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill travel horizontal: 100 mm Spindle drive: 5.5 kW Electrical connection: 380 Volt, 50 Hz, 10 kW - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02 – 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping Bwedpfx Amov Amryo Tsn - Coolant system integrated in machine base - Universal rotary table, 360° rotatable, tiltable/swiveling 30°, 225 mm cross adjustment - Rotary table with direct division 72 x 5° and indirect division via index plate 1:120 = 1 revolution = 3° - Swivelling control panel - Centralized lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Required space L x W x H 2650 x 2000 x 2450 mm Weight 3700 kg + 550 kg steel plate Weight 4250 kg (weighed) Very good condition.

Kondisi: bekas, CNC tool milling machine MIKRON type WF 40C/3M with CNC path control Heidenhain TNC 310 Machine No. 440911, year of manufacture approx. 1985, overhauled and control conversion in 11/2000 Travels X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Bjdpfjw A Af Ijx Am Town Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse X and Y = 5000 mm/min; Z = 4000 mm/min. Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gearbox steps - Vertical milling head swivels right and left - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours (read off the display) - Control cabinet fixed to the rear of the machine - Coolant system integrated in the machine base - Swivelling control panel - Wiring diagram, operating manual for the control available Required space L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg In good condition

Kondisi: bekas, CNC milling machine ABENE type VHF-360TI Serial no. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel distances X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle taper SK 40 Spindle speed 55 - 3000 rpm, 2 stages Feed rate 30 - 4000 mm/min, stepless Rapid traverse speed (X + Y axis) 4000 mm/min Rapid traverse speed (Z axis) 2000 mm/min Distance spindle nose to table 20-495 mm Spindle drive motor power 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with RS232, USB, and LAN interfaces - Electronic handwheel - Mechanical handwheels for X and Y axis - Spindle speed manually switchable in 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted swiveling spindle head +/- 50° - Inclined bed adjustment manual via hand crank Bsdpfxjty A Ehs Am Tewn - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump, positioned next to the machine - Machine lamp - Control cabinet mounted to the machine - Displayed control operating hours = 14,780 h - Displayed machine operating hours = 12,980 h - Displayed program run hours = 400 h Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg In very good condition.

Kondisi: baru, Daya motor ----- 3,75 KW Perpindahan X ----- 1300 mm Perpindahan Y ----- 320 mm Perpindahan Z ----- 450 mm Kisaran putaran spindle frais horisontal ----- 58 ~ 1800 rpm Kisaran putaran spindle frais vertikal ----- 58 ~ 3000 rpm Konektor spindle vertikal ----- ISO 40 Konektor spindle horisontal ----- ISO 50 Meja kerja ----- 1650 x 360 mm Berat ----- 2200 KG Bedpfx Ajv Uzn Hem Tjwn INCLUDE * Pembacaan digital 3 sumbu merek SINO * Feeding otomatis meja kerja X,Y,Z * Feeding otomatis spindle * Pencahayaan LED * Sistem pendingin * Panel kontrol mewah * Kepala frais dapat dimiringkan kiri/kanan 0 - 45 derajat * Meja kerja dapat diputar * Batang penarik pneumatik

Kondisi: bekas, Tahun pembuatan: 1999, Schleifdurchmesser 350 mm Schleiflänge 1000 mm Spitzenhöhe 175 mm GENERALÜBERHOLT Foto von ähnlicher Maschine in 1500mm Spitzenweite Bwjdpjy U N Hpjfx Am Tjn - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N - B-Achse - Kel-Set - hydraulischer Pinolenrückzug - Mikroverstellung am Reitstock - Werkstückspindelstock mit schwenkbarem Unterteil

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1,000 mm Center height: 175 mm Control: Fanuc 310is CNC control: GE Fanuc 310is Hand panel for GE Fanuc CNC control Bedpfx Ajy U N Hism Town Overhauled according to Kellenberger protocol Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel left: 500 x 80 mm Grinding wheel right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the top table Swiveling holder for PCD diamond dressing plates Base module for KEL-TOUCH in-process gauging sensor and KEL-BALANCE balancing systems KEL-TOUCH in-process sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle stock for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Prepared for external filter Coolant shutdown for table units Full enclosure – emulsion Grinding mist extraction unit – emulsion Maintenance unit for pneumatic auxiliary functions Prepared for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for steady rest (Arobo steady rest)

Kondisi: bekas, Tahun pembuatan: 2018, translation_01 Bodsyrt A Iepfx Am Tewn

Kondisi: bekas, Tahun pembuatan: 2010, translation-001 Bodpfx Aexq R E Njm Tewn

Kondisi: hampir baru (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 510 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: MAZATROL 640M 5X, model controller: MAZATROL 640M 5X, tinggi benda kerja (maks.): 405 mm, diameter benda kerja (maks.): 500 mm, berat benda kerja (maks.): 300 kg, lebar meja: 400 mm, panjang meja: 500 mm, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.000 W, hidung spindel: CAT40, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, *MAZAK VARIAXIS 500-5X 5-AXIS TWIN PALLET VMC* Kategori: Pusat Pemesinan Vertikal (VMC) No. Referensi: 3877 Kapasitas: 510 x 510 x 460 mm Tahun Pembuatan: 2003 Spesifikasi Teknis: SPINDEL Taper Spindel: CAT40 Kecepatan Spindel: 12.000 RPM Daya Motor Spindel: 30 HP KAPASITAS KERJA Ukuran Palet: 500 x 400 mm Perjalanan (XYZ): 510 x 510 x 460 mm Sumbu A: -120 / +30 Derajat Sumbu C: 0,001 Derajat Ukuran Maks. Benda Kerja: Ø500 x 405 mm (Tinggi) Bodpfxox Adn Us Am Tewn Bobot Maks. Benda Kerja: 300 kg ATC Kapasitas Ganti Alat: 40 Tool (CAT40) CNC Kontrol: MAZATROL 640M 5X PC-FUSION-CNC Detail Tambahan: Twin Pallet

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: belum diuji, diameter putar di atas sled silang: 700 mm, panjang pembubutan: 2.000 mm, diameter pembubutan: 700 mm, lubang spindel: 106 mm, kecepatan spindel (maks.): 1.800 rpm, Dijual: 1 unit mesin bubut lead dan screw spindle bekas Produsen: Weiler Werkzeugmaschinen Tipe: E70 Tahun pembuatan: 1996 Spesifikasi teknis: Tinggi center: sekitar 355 mm Diameter ayunan di atas ranjang: sekitar 700 mm Diameter ayunan di atas support: sekitar 420–450 mm Jarak antara center: 2000 mm Lubang spindle: 106 mm Termasuk dokumentasi yang terlihat di gambar, konveyor serpihan, dan dudukan alat Sauter. Bsdpfx Amey R Dyve Tswn Mesin dapat dilihat di gudang kami di 09599 Freiberg.

Kondisi: bekas, Tahun pembuatan: 2007, x-travel 1,250 mm y-travel 1,000 mm z-travel 1,000 mm Control SIN840D pl C-axis (table) 360 x 0.001° B-axis (head) -10 – 180 x 0.001° Table speeds stepless 10 – 500 rpm Feed rate X/Y/Z axis 20 – 10,000 mm/min Rapid traverse X/Y/Z 60.00 m/min Tool holder HSK 100 Spindle speed – steplessly programmable 20 – 8,000 rpm Spindle speed Gear range 1 20 – 1,600 rpm Spindle speed Gear range 2 1,600 – 8,000 rpm Drive power 100% duty cycle 19.00 kW Drive power 40% duty cycle 28.00 kW Torque at 40% / 100% duty cycle 727 / 492 Nm Table clamping surface Ø1,100 mm Table load capacity 1.50 t Tool magazine with 240 slots Tool diameter 110 mm Tool diameter with free adjacent pockets 230 mm Tool length – max. 500 mm Tool weight – max. 30.00 kg Total connected load 85.00 kW Machine weight approx. 32.50 t Space requirement approx. 9.50 x 4.80 x H3.80 m Bedpfx Aey E Tviem Tewn 5-axis machining center with turning function and pallet changer. Control: SIEMENS SINUMERIK 840D powerline, Operating mode 4, rack tool magazine with 240 slots, belt filter system 980 liters, swarf conveyor, coolant through spindle, RotoClear.

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: 4273, gaya penekanan: 110 t, Die Übersetzung ins Englische für eine professionelle, technische Plattform wie Machineseeker könnte wie folgt lauten: Bedpfx Ajd Ap Ugom Tjwn --- Spotting Press – Manufacturer: Hidralmac – 110 t Try-Out Press – Table 1,200 × 1,000 mm For sale is a high-performance spotting press from Hidralmac with a pressing force of 110 t. The machine features a swiveling and traversable table, a large stroke of 1,150 mm, as well as high rapid traverse speeds, making it especially suitable for spotting, adjustment, and try-out work in tool and mold making. ==== Technical Data & Information: Spotting Press Hidralmac – 110 t Try-Out Press == General Specifications - Manufacturer: Hidralmac - Model: Spotting Press - Design: Try-Out / Spotting Press - Pressing force: 110 t - Machine weight: approx. 16 t - Dimensions (L × W × H): 4,200 × 2,400 × 4,800 mm == Working Area - Stroke: max. 1,150 mm - Table stroke: 1,200 mm == Table System - Table size: 1,200 × 1,000 mm - Swivel table: up to 45° - Max. table load: 12 t - Table traverse speed: 25 mm/s - Table swivel speed: 10 mm/s == Forces - Return force: 11 t == Speeds - Working speed: 0 – 10 mm/s (adjustable) - Return speed: 130 mm/s - Rapid traverse: 195 mm/s == Hydraulics - Drive power: 23 kW - Oil tank: 400 l - Recommended oil: DIN HLP / ISO VG 46 == Electrical - Voltage: 400 V - Control voltage: 24 V DC - Frequency: 50 Hz == Equipment - Colour scheme: - Machine body: RAL 7035 (Grey) - Moving parts: RAL 2009 (Orange) - Other components: RAL 7021 (Dark grey) ===== Spotting work, tool adjustment, tool try-out, mould making, toolmaking, try-out work, adjustment processes, large tooling Spotting Press, Tool Try-Out Press, Tryout Press, Tool Adjustment Press, Tool Try-Out Press, Tryout Press, Hydraulic Press Are you looking for a hydraulic press custom-tailored to your application? Contact us for an individual offer. Our hydraulic presses are built according to German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which is based on these standards. Our core strength lies in custom machinery engineering and press automation. We offer customized hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers. ---

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Frame dowel and slot mortising machine by Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and baluster drilling are easily achievable due to the swiveling drilling unit. - Two-speed switchable motor - Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm - Motor start via convenient handle switch - Precision chuck with two inserts: 16mm and M10 thread - Table size approx. 1100 x 240 mm - Linear laser for precise workpiece positioning - Drilling unit can be swiveled 65° to both left and right - Pneumatic adjustment of working height, doweling on two levels without resetting - Desired drilling heights can be set for each drilling level using handwheel and digital counter, switching is then done pneumatically at the front - Cross adjustment approx. 320 mm, stepless or in 12 mm increments - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, placeable at the front and rear of the table - 2 swiveling workpiece supports - 2 side stops, can also be used as front stops - Mobility kit - Extraction port 80 mm - 4 used but good drill bits: 9, 12, 16, 19 mm A few paint touch-ups, otherwise in very good condition – see original photos. A used swiveling slot mortising machine in this condition is very rarely available. CE marked Operating manual included Dimensions approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. Bwjdjyfta Tepfx Am Ten Inspection and demonstration on site possible by prior arrangement. We only offer machines that are ready for demonstration in our warehouse, see "further offers from this seller".

Kondisi: bekas, translation_de_hu_001 Bwsdpfsy Sbkbjx Am Ten

Kondisi: bekas, universal-fraesmaschine-spezifikation Bwedpfjy Umbqex Am Tsn

Kondisi: bekas, Tahun pembuatan: 2003, 1 used, very well-maintained universal milling machine with 3-axis FAGOR digital readout, infinitely variable feed and overhead support drive Manufacturer: ARSENAL, Bulgaria Model: FUV 321 M Year of manufacture: 2003 Technical data: Spindles: Spindle mounting vertical + horizontal: ISO 50 Speed range, vertical, stepless: 30 – 2000 rpm Speed range, horizontal, stepless: 30 – 2000 rpm Table: Clamping surface: 1350 x 320 mm X-axis, manual / mechanical: 1100 / 1080 mm Y-axis, manual / mechanical: 360 / 340 mm Z-axis, manual / mechanical: 460 / 440 mm Overarm adjustment: approx. 600 mm Table swivelling range: ± 45° Max. distance from table surface to horizontal spindle centre: 490 mm Max. distance from table surface to vertical spindle nose: 630 mm Table movement: Longitudinal and cross feeds, stepless: 12.5 – 630 mm/min Vertical feed, stepless: 5 – 262 mm/min Rapid traverse, longitudinal and cross: 2.5 m/min Rapid traverse, vertical: 1.04 m/min Drive Motor power: 7.5 kW Dimensions and weight Overall dimensions (L x W x H): 2000 x 2500 x 2050 mm Weight: 3200 kg Accessories / Special features: Bodpfx Amsbpmurj Town • 3-axis Digital readout, manufacturer FAGOR, model NV 300 M • Universal milling head, "HURON" system, manually adjustable across 2 planes • Infinitely variable feed via joystick and potentiometer on all 3 axes • Stepless speed control for vertical + horizontal via potentiometer with 2 servo drives by TELEMECANIQUE, model Altivar 28 • Stepless feed and stepless speed, each with digital display • Overarm with motorized drive for the universal milling head • Increased speed range up to 2000 rpm • Automatic machining cycle for the X-axis • Horizontal milling device with 2 counter-supports • Coolant system • Central lubrication system • Chip tray • Machine feet • Machine lamp • Operating manual • Electrical equipment CE • CE conform Original new price: €65,800.00 net The machine can be inspected and demonstrated under power at our warehouse at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Ruüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Kondisi: bekas, Tahun pembuatan: 2014, dmu40evo2014-specs Bwjdpfx Aoycxihjm Tjn

Kondisi: baik (bekas), Tahun pembuatan: 1990, 1 used, well-maintained CNC-controlled tool milling machine in travelling column design, equipped with GRUNDIG Dialog 11 CNC path control Table size: 1600 x 675 mm Tool holder: SK / ISO 40 Travel paths: X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load capacity: 2000 kg Spindle speed range: 20 – 6300 rpm Feed range, stepless: 2 – 10,000 mm/min Rapid traverse (all axes): 10 m/min Quill stroke: 80 mm Drive power 100% duty cycle: 7.5 kW 40% duty cycle: 12 kW Machine dimensions (L x W x H): 3600 x 3000 x 2300 mm Machine weight: 6800 kg Control cabinet dimensions: 1700 x 900 x 1750 mm Control cabinet weight: 470 kg Accessories / Special Features: • CNC tool milling machine suitable for tool and jig construction, training, and mould-making applications • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input supported by graphics, “contour pocket” milling cycle for automatic rough-milling of irregular pockets, including those with islands, coordinate system offset and rotation • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling device • Fully enclosed safety cabin • Ball screw spindles in all 3 axes • Coolant system • Machine lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Bwodpfx Aohhuf Hem Tjn

Kondisi: bekas, en-001 Bodpjxt Hn Sefx Am Tewn

Kondisi: bekas, Tahun pembuatan: 1999, x-Weg 4000 mm y-Weg 1000 mm z-Weg 1500 mm Heidenhain 355 Steuerung Tragkraft 10 t SK50-Kopf ja Bodpfxoxzuz Ne Am Tewn Weitere Bilder / Video vorhanden

Kondisi: bekas, Tahun pembuatan: 2003, schleifmaschine1500 Bsdpfx Aox Hgilem Tswn

Kondisi: bekas, Tahun pembuatan: 2014, dmu60evo2014 Bodpoycxinefx Am Tswn