Beli Alpha Tec -- Alphatec Press Hidrolik Dua Tiang, Press Dua Tiang, Press Perata, Hydro Press bekas (27.960)

Kondisi: bekas, Machine not operational – control unit is not functioning Special offer price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force 500 tons Distance between uprights (front/back): 2520 mm Table size: 2500 x 2500 mm Bedpfsdzqptjx Am Tjwn Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Max. installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1,000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100–800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guideway for the ram - Hydraulic ram locking at top dead center - Free-standing control cabinet (200 x 50 cm) - Electrical control: SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7”) - Free-standing two-hand control panel - Floor-level installation - Table plate: 2510 x 2530 x 135 mm (approx. 6,700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Space required for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Produsen: GIGANT Model: G2-1200/2 Tahun: 1993 Kondisi: Bekas Nomor stok: 0375 Daya tekan: 1200 ton Jumlah titik tekan: 2 Ukuran meja cetakan: 3.700 x 2.700 mm Ukuran slider: 3.700 x 2.700 mm Langkah slider: 1.000 mm Celah vertikal maksimum: 1.590 mm Celah cetakan pada PMI: 610 mm Langkah penahan bawah: 400 mm Kereta bergerak: Tersedia di depan Bodpfx Amox R U Ido Tswn

Kondisi: bekas, Single-column Hydraulic Press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 tons Ram stroke: 500 mm Throat depth: 300 mm Installation height: 700 mm Table size: 1000 x 500 mm Table bore: Ø 210 mm Ram area: 400 x 360 mm Clamping bore: Ø 40 mm Table height above floor: 855 mm Rapid advance speed: 280 mm/sec Pressing speed: 3.5 mm/sec up to 25 mm/sec Bodpfxjhrakvj Am Tewn Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 controller - Measurement system for stroke adjustment - Pressing speed steplessly adjustable via potentiometer - Pressure steplessly adjustable via manual pressure regulator - Short-stroke device - Mechanical tool clamping on ram with T-slots and clamping pin bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot switch - Control unit prepared for electrical tool monitoring - Hydraulic and electrical schematics available Space requirement (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 600 mm, lebar meja: 800 mm, panjang meja: 800 mm, jarak antara tiang: 800 mm, gaya penarikan balik: 40 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 100/40 TON COLUMN-TYPE HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 100/40 ton column-type hydraulic drawing press is an industrial press solution with a rigid four-column body, specifically engineered for metal forming, deep drawing, and precision pressing applications. The frame is constructed from St52 grade steel and undergoes stress-relief treatment via vibration. This structural design ensures high parallelism and perpendicularity tolerances are maintained over time. The ram and blank holder systems operate independently; stroke and pressure adjustments can be controlled precisely via a touch screen panel. REXROTH or PARKER hydraulic components, IE3-class motors, and PLC-controlled system architecture provide high efficiency, reliability, and long service life. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements to the lowest possible level. This model offers an ideal solution for medium-scale serial production, die testing, and precision forming applications. Key Advantages - Rigid 4-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touch screen panel - High precision and repeatability - Low maintenance cost, long lifespan Areas of Application - Metal forming operations - Deep drawing applications - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4 Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (BLANK HOLDER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (BLANK HOLDER): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELD STRESS RELIEF: Vibration stress-relieving WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST APPROACH SPEED: 150 mm/s MOVING TABLE PRESSING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 230 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 145 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM / BLANK HOLDER STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION ENCODER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey. Bsdpfx Aex N Ulyem Town

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, nomor mesin/kendaraan: 119, Fungsionalitas: berfungsi sepenuhnya, daya: 11 kW (14,96 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, gaya penekanan: 30 t, panjang langkah: 700 mm, lebar meja: 500 mm, panjang meja: 700 mm, jarak antara tiang: 680 mm, panjang total: 2.100 mm, lebar total: 1.800 mm, tinggi total: 3.500 mm, berat keseluruhan: 3.000 kg, Perlengkapan: penghadang cahaya keselamatan, Hydraulic press empat kolom yang terawat dari pembubaran lokasi. Mesin ini sepenuhnya berfungsi dan hingga baru-baru ini masih digunakan dalam produksi. Mesin telah dimodernisasi dan dilengkapi dengan kontrol digital Siemens yang telah diperbarui. Selain itu, mesin juga dilengkapi dengan pagar pengaman dan light curtain dari SICK. Bwodpfjy Sglwox Am Tsn Mesin saat ini disimpan, namun dapat dilihat sewaktu-waktu.

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Bedpfxjhlnzke Am Tewn

Kondisi: bekas, Double Column Hydraulic Press SCHÖN Type SH 25 Bwsdpfew A Amrjx Am Ton Machine No.: 4453 Year of manufacture: 1999 Pressing force: 25 t Column spacing: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection: 380 Volt, 50 Hz Equipment: - SICK safety light curtain, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid traverse and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press dwell extension 1-10 s (pressure holding time) - Time setting for return stroke speed - Blowing device prepared electrically, without air valve - Hydraulic tool safety, manually adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1,200 kg Good condition

Kondisi: bekas, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type: RSD 1500 - 125 Machine no.: 317 / 690 Year of manufacture: approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Bedpfx Aod Swtajm Town Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram surface with 4 threaded holes M16 and 20 mm guide slot, centered centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Kondisi: bekas, Single-column pneumatic press, hydraulic press PAUL ANTON model PVT 2 Pneumatic benchtop press, embossing press Serial no. 97148 Year of manufacture: approx. 1980 Bwedpfx Amjtrpiis Tjn Pressing force: 10 tons Throat depth: 100 mm Ram stroke: approx. 25 mm Ram surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very robust construction - Hydro-pneumatic press with air-to-oil pressure conversion - Pneumatic foot switch - Ram with internal thread M12 - Metal substructure Required space (L x W x H): 850 x 620 x 1560 mm Weight: approx. 200 kg Good condition

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2846, 2846-demo-compoundier-extruder Bwsdei Dtb Aopfx Am Ten

Tahun pembuatan: 2015, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 2245, OFFER No. 2245 Bodpfx Amed Sg Hrj Tewn 1 used, as-new laboratory batch extrusion granulation line with accessories, consisting of: - Single-screw extruder AlphaTec Type AE-S 25-30 - Screw Ø 25 mm – 30 L/D - Extruder drive 3 kW, screw speed 10 – 80 rpm - Air-cooled barrel, electrically heated - 1x degassing zone - 1x manual screen changer with screen Ø 68 mm - 1x strand die head - 1x water bath 1,000 x 150 mm, height-adjustable - 1x strand pelletizer, feed width 30 mm, drive 0.75 kW - Control cabinet with PID control, - Melt pressure, speed frequency controlled - Demonstration unit Test run with your material can be arranged at short notice after consultation. Additional extruders available ex-stock Wuppertal.

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Strand granulator Alphatec Type AS-G 200 Carbide cutting rotor pneumatic pressure Feeding width / rotor: 200 mm Drive: 7.5 kW AC, speed frequency-controlled Throughput up to approx. 700 kg/h - depending on material Bwodpecpg Rqsfx Am Ten Further strand granulators (ST) available ex works Wuppertal. Please ask for our current stock list or visit us.

Kondisi: bekas, Single-column Hydraulic Press DUNKES Type HZT 2.5 Machine No. H94-2558 Year of manufacture: 1994 Press force: 2.5 tons Throat depth: 180 mm Table dimensions: 420 x 300 mm Pass-through opening in table: 60 x 185 mm Ram area: Ø 40 mm Clamping pin bore: Ø 20 mm Bedpfoh Uhqysx Am Tswn Ram stroke: 160 mm Max. installation height: 250 mm Rapid down movement: 65 mm/sec Rapid up movement: 160 mm/sec Working speed: 8.3 mm/sec Table height above floor: 950 mm Hydraulic operating pressure: 135 bar Hydraulic tank capacity: approx. 100 liters Drive power: 1.5 kW Electrical connection: 400 Volt, 50 Hz - Installation height can be increased by 80 mm by shortening the piston rod - Pressure and stroke cut-off - Two-hand operation on the machine - Stroke counter - Fail-safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for hand insertion operations) - 32,047 recorded operating hours - Electrical and hydraulic circuit diagrams available Required space (L x W x H): 1,100 x 980 x 1,950 mm Weight: 700 kg Very good condition

Tahun pembuatan: 2025, Kondisi: baru, Stock no. 2846 Compounder Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, tight-intermeshing, Barrel water-/media-cooled/tempered Throughput capacity up to 1,200 kg/h – depending on material Drive 250 kW – AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeder type ZS-B Siemens touch HMI control system OPTIONAL: Bsdpfxjd Hqa Ie Am Town > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizing (UWG) > Screw configuration according to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled upon request.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2846, Stock no. 2846 Compounder Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, tight-intermeshing, Barrel water-/media-cooled/tempered Throughput capacity up to 1,200 kg/h – depending on material Bwodpfji Dtbiox Am Ton Drive 250 kW – AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeder type ZS-B Siemens touch HMI control system OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizing (UWG) > Screw configuration according to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled upon request.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2846, lager2846 Bwsdpfxji Dtbue Am Ton

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 2.846 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2846, Inventory No. 2846 Compounding extruder, ready for demonstration: Model Alphatec AD-.S 75 with: - Screw diameter: 72 mm - Segmented screws, co-rotating, intermeshing, barrel water/medium-cooled/temperature controlled - Throughput capacity: up to 1200 kg/h (material-dependent) - Drive: 250 kW AC - 48 L/D - 3x degassing zones – 1x vacuum pump with condensate separator - 2x side feeders, type ZS-B Bsdpei Dtbqjfx Am Tjwn - Siemens HMI Touch control system OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizer (UWG) > Screw configuration according to your requirements > Material dosing units: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The plant is ready for demonstration. Test runs with your material are possible by arrangement.

Kondisi: siap digunakan (bekas), Tersedia Moving-Die-Rheometer Alpha untuk analisis reologi dan vulkanisasi campuran karet. Standar uji: ASTM D5289/ISO6502, suhu maks.: 200°C, frekuensi: 1667Hz, regangan: 0,2°/0,5°, tekanan uji: 8000kPa. Dimensi mesin X/Y/Z: sekitar 800mm/700mm/1350mm, berat: sekitar 200kg. Tanpa perangkat lunak. Dokumentasi tersedia. Pemeriksaan di lokasi dimungkinkan. Bodsxruklopfx Am Tswn

Kondisi: siap digunakan (bekas), Tersedia viskometer Alpha untuk analisis elastomer mentah dan campuran karet. Standar pengujian: ASTM D1646/D3346, suhu maksimum: 200°C, kecepatan rotasi: 2 rpm. Dimensi mesin (P/L/T): sekitar 800mm/700mm/1350mm, berat: sekitar 200kg. Tanpa perangkat lunak. Dokumentasi tersedia. Kunjungan di lokasi dimungkinkan. Bwedoxrukrspfx Am Tjn

Kondisi: diremajakan ulang (bekas), Peralatan pengujian karet yang tersedia 1 x Rheometer Alpha Production MDR (opsional dalam kontainer dengan alat punch sampel pneumatik) Bsdpfowmnlhox Am Town Perangkat telah diperiksa, dikalibrasi, dan dilengkapi dengan perangkat lunak baru pada PC tower baru!

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 22 kW (29,91 hp), tegangan masuk: 400 V, arus masuk: 30 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, gaya penekanan: 315 t, panjang langkah: 800 mm, kecepatan operasi: 120 mm/dtk, kecepatan mundur: 100 mm/dtk, lebar meja: 1.160 mm, panjang meja: 1.260 mm, tinggi meja: 600 mm, lebar pelat tuas: 1.160 mm, panjang pelat penekan: 1.260 mm, tabel jarak ke piston: 1.250 mm, jarak antara tiang: 1.160 mm, gaya penarikan balik: 30 t, kapasitas tangki oli: 510 l, panjang total: 2.000 mm, lebar total: 1.250 mm, tinggi total: 3.500 mm, berat keseluruhan: 13.000 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, YQ32-315T Hydraulic Press Diese Pressenserie umfasst universell einsetzbare Hydraulikpressen, die in der Maschinenbau-, Automobil-, Motoren- und Elektroindustrie, der Leichtindustrie sowie in weiteren Branchen weite Verbreitung finden. Sie eignen sich für verschiedenste Blechumformprozesse wie Ziehen, Biegen, Bördeln, Kalt-Extrudieren und Stanzen. Zudem sind die Maschinen für das Richten, das Einpressen sowie das Pressformen von Pulvererzeugnissen, Schleifmitteln, Kunststoffprodukten und Isoliermaterialien ausgelegt. Arbeitsdruck, Pressgeschwindigkeit und Hub sind innerhalb der vorgegebenen Parameterbereiche prozessabhängig einstellbar. Die Pressen sind mit einer unabhängigen Hydraulikeinheit und einem eigenen Elektrosteuerungssystem ausgestattet. Gesteuert wird zentral über Drucktasten, wobei drei Betriebsarten verfügbar sind: manuell, halbautomatisch und automatisch. Es stehen zudem zwei Pressmodi zur Verfügung: Druckregelung und Hubeinstellung. Ablauffolge: Motorstart → Hauptzylinderkolben fährt im Eilgang (Leerhub) abwärts → Langsames Pressen mit Krafteinsatz → Druckhalten (Haltezeit einstellbar) → Druckentlastung → Rückhub des Schlittens → Arbeitsende → Gesamtstopp Pressengestell Das Gestell basiert auf einer vertikalen Dreischlitten-Vierständer-Konstruktion, bestehend aus oberem Querbalken, Schlitten und unterem Querbalken, die durch vier Säulen miteinander verbunden und mit Muttern zu einem geschlossenen, starren Rahmen verschraubt sind. Sämtliche tragenden Bauteile werden aus geschweißten Stahlplatten mittels Schutzgasschweißen (CO₂) gefertigt. Nach Abschluss der Schweißarbeiten erfolgt eine Schwingungsentspannung zur Beseitigung von Eigenspannungen. Bjdpfoy Uiyvsx Am Tjwn Alle wesentlichen Bauteile werden auf modernen Maschinen – wie Portalfräsmaschinen, großformatigen Bohr- und Fräsmaschinen sowie Präzisionsdrehmaschinen – bearbeitet, um eine hohe Gesamtgenauigkeit der Maschine zu gewährleisten. Die Vorspannung des Gestells erfolgt mittels Hydraulikmuttern. Der Schlitten ist mit der Kolbenstange des Hauptzylinders verbunden und wird beim Auf- und Abwärtsfahren von den Säulen geführt. Auf der Unterseite des Schlittens sowie auf der Oberseite des fahrbaren Tisches befinden sich T-Nuten zur Aufnahme von Werkzeugen. Die Säulen bestehen aus hochwertigem, induktiv gehärtetem 45er Kohlenstoffstahl und sind hartverchromt; die Führungshülsen werden aus Verbundwerkstoff gefertigt und bieten hervorragende Verschleißfestigkeit sowie gute Selbstschmiereigenschaften.

Kondisi: sangat baik (bekas), NOMOR KATALOG: 7992 DATA TEKNIS - area pemuatan: 2 - penekan samping yang dapat diatur manual: 2x6 pcs - penekan vertikal pneumatik: 2x6 pcs - panjang maksimum elemen yang direkatkan: 3600 mm - tinggi maksimum elemen yang direkatkan: 1500 mm Bwedpfx Amozba Aye Ten - ketebalan maksimum elemen yang direkatkan: 130 mm - panduan untuk perekat elemen tipis - dimensi (P/L/T): 4300x1570x2110 mm - berat: 1400 kg KEUNGGULAN – dua area kerja – panjang pengeleman 3600 mm – silinder pneumatik – panduan untuk perekat elemen tipis – belum dicat – mobil – dilengkapi roda – mesin press bekas, kondisi sangat baik Harga netto: 14.900 PLN Harga netto: 3.550 EUR Harga netto dihitung berdasarkan kurs 4,2 PLN/EUR (jika terjadi fluktuasi nilai tukar yang signifikan harga dapat berubah)

Tahun pembuatan: 1979, Kondisi: baik (bekas), tr-01 Bwsdezbirkspfx Am Tsn

Kondisi: sangat baik (bekas), NOMOR KATALOG 7926 DATA TEKNIS - panjang kerja: 6200 mm - lebar kerja: 150 mm - tinggi kerja: 1350 mm - 12 silinder hidrolik vertikal - dimensi (P/L/T): 6580/1270/2350 mm - berat sekitar 4000 kg KEUNGGULAN – kondisi sangat baik – mesin press bekas Bsdpszaa Umefx Am Tswn – belum dicat ulang – dirancang untuk penggunaan profesional Harga netto: 69.900 PLN Harga netto: 16.650 EUR Harga netto dihitung pada kurs 4,2 PLN/EUR (jika terjadi fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 100 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 40 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Uprights: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touch Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis travel Backgauge Fingers 2 units Flat type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Sheet sag prevention structure European Type Quick-Release Tool Clamping System (Promecam E7) Quick die change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Bottom Table 70 mm or 90 mm bottom table (bed) T-slot can be applied according to tools to be used Standard Upper Punch ES1260 Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Meter Compatible with Amada Standard Lower Die ES2067 4-way V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Tons/Meter Compatible with Amada B Series Open Frame Design Black plexiglass protective panels Wide field of view Bwodpfjzbrf Tsx Am Ton Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic manifold Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Integrated measuring scale Provides operator support Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo motor controlled X and R axis motion X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhances operator safety CE compliant Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touch graphic display 2D drawing and 3D product simulation User-friendly interface 1 GB hard disk Automatic bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction Windows-based operating system 2 USB ports Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Tons Bending Length: 2100 mm Distance Between Uprights: 1600 mm Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷